More Precision MDS-45-K-SA Sensor with integrated electronics for measuring the position of a magnetic target1). Sensor dimensions 57.8 51 33 .5 o6 o3 .5 o 4.3 23 5.1 Magnetic target: - Surface: nickel-plated - Target mounting: countersunk screw M4 (non magnetisable) - Max. operation temperature: 80C - Weight: 15g Model Measuring range Offset Linearity deviation 2) Temperature error Resolution 3) Frequency response (-3dB) Electric connection Output signal MDS-45-K-SA 45mm approx. 4mm <3% FSO 0.025% FSO /K <0.05% FSO 1000Hz M8x1, 4-pin, Connector (screwable and clipable) Voltage: 2V 0.4V ...9.6V 0.4V Load (11.5V Supply) 30K ; Load (24V Supply) 10K Strom: 4mA 0.8mA ... 19.2mA 0.8mA Load (11.5V Supply) 400 ; Load (24V Supply) 800 Storage temperature range -20C ... +80C Operation temperature range -20C ... +80C Power supply Power consumption Protection class Vibration Shock Housing Weight 11.5Vdc ... 30Vdc max. 20mA (voltage output); max. 40mA (current output) IP67 (connected) DIN EN 60068-2-6 (20g, 58 - 500Hz) DIN EN 60068-2-29 (40g, 6ms, 1000 cycles) DIN EN 60068-2-27 (100g, 6ms, 3 cycles) Plastic / nickel-plated brass approx. 25g FSO = Full scale output 1) Magnetic fields and/or ferromagnetic materials which are close to the sensor may influence the sensor characteristics and the measuring range. 2) Related on the regression line (least-squares method) 3) Peak-Peak; external low pass; frequency response 5kHz 11.8 6 o 20 8.3 5 MDS-45-K-SA Pin assignment Pin assignment Pin Function Colour Description 1 Vcc brown Power supply 11.5V...30V 2 Iout white Output signal 4mA...20mA 2 4 1 3 3 Gnd blue Ground 4 Uout black Output signal 2V...10V View connector side Output characteristics 20mA / 10V 19.2mA / 9.6V 18.4mA / 9.2V 4.8mA / 2.4V 4mA / 2V 3.2mA / 1.6V 9.1 MR Accessories MDS-45-K-SA Supply and output cable PC5/4(01) (5m, shielded, connector straight) Art.No. 2901599 PC5/4/90(01) (5m, shielded, angled connector) Art.No. 2901600.01 Magnets Magnetic disc / D20x04x07Ni-35SH Magnetic disc / D20x04x05Ni-35SH Magnetic disc / D15x04.3x05Ni-35SH Magnetic disc / D12x04.3x05Ni-35SH Magnetic disc / D10x04.3x05Ni-35SH 4) (Measuring range 55mm) 4) Art.No. 2969002 (Measuring range 45mm) Art.No. 2969001(included in the scope of delivery) (Measuring range 35mm) 4) Art.No. 2969003 (Measuring range 27mm) 4) Art.No. 2969004 (Measuring range 20mm) 4) Art.No. 2969005 If the magnet is replaced, output characteristics (gradient and zero) change Micro-Epsilon info@micro-epsilon.com www.micro-epsilon.com info@micro-epsilon.co.uk www.micro-epsilon.co.uk info@micro-epsilon.us www.micro-epsilon.us certified DIN EN ISO 9001 : 2008 modifications reserved / Y9761352-A021051DGO