Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 FEATURES * Polarized aluminium electrolytic capacitors, non-solid dbook, 4 columns * Large types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve * Pressure relief on the top of the aluminium case * Charge and discharge proof * Useful life: 2 500 hours at 85 C. CCA401 APPLICATIONS Fig.1 Component outlines. * General purpose, industrial and audio/video systems * Smoothing and filtering * Standard and switched mode power supplies * Energy storage in pulse systems. handbook, halfpage PSM-SI 057 smaller dimensions PUM-SI 157 CCA483 QUICK REFERENCE DATA DESCRIPTION VALUE Case size (Dnom x Lnom in mm) 22 x 25 to 35 x 50 56 to 2200 F Rated capacitance range (E6/E12 series), CR 20% Tolerance on CR 200 V, 250 V, 400 V, 450 V Rated voltage range, UR -25 to +85 C Category temperature range Endurance test at 85 C 2000 hours Load life at 85 C 2000 hours Useful life at 85 C 2500 hours Useful life at 40 C and 1.2 x IR applied 45000 hours Shelf life at 0 V, 85 C 1000 hours Based on sectional specification IEC 384-4-1/CECC 30300, LL grade Climatic category IEC 68 (DIN 40040) 1997 Jul 09 25/085/56 (HPF) 1 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 Selection chart for CR, UR and relevant nominal case sizes (D x L in mm); preferred types in bold CR (F) 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 1997 Jul 09 UR (V) 200 250 400 450 - - - - - - - - - - - - - - - - - - 22 x 25 - - 22 x 30 - 22 x 30 - 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 - - - - - - - - - - - - - - - 22 x 30 - - 22 x 30 25 x 25 - 22 x 35 25 x 30 22 x 40 30 x 25 25 x 35 30 x 30 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 30 x 40 35 x 35 - 30 x 45 35 x 40 35 x 45 - 35 x 50 - - - - 22 x 25 22 x 25 - 22 x 30 - 22 x 30 - - 22 x 35 25 x 30 - 22 x 40 25 x 35 - 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 - - 35 x 50 - - - - - - - - - - - - - 22 x 25 22 x 30 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 30 30 x 25 25 x 35 25 x 40 30 x 30 25 x 40 30 x 35 35 x 25 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 - 30 x 50 35 x 40 35 x 45 - 35 x 50 - - - - - - - - - - - - - - - - - - 2 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance code on rated capacitance (M for 20%) * Rated voltage (in V) * Climatic category in accordance with "IEC 68" * Date code (year and week) in accordance with "IEC 62" * Code for factory of origin * Name of manufacturer * `-' sign to indicate the negative terminal, visible from the top and side of the capacitor * Code number (last 8 digits) * Code for basic specification in accordance with "IEC 384-4-1" and "CECC 30301". 1997 Jul 09 3 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 MECHANICAL DATA AND PACKAGING QUANTITIES handbook, 4 columns O D handbook, 2 columns TERMINAL 10 0.1 Lmax TERMINAL Bottom view 5.8 MBC328 - 1 0 1 Dimensions in mm. For dimensions see Table 1. The minus terminal can be marked with a black dot or with an imprinted `-' sign. 0.1 (2x) Dimensions in mm. Fig.2 Snap-in. Table 1 O 2 MBC329 Fig.3 Piercing diagram. Physical dimensions, mass and packaging information; see Fig.2 NOMINAL CASE SIZE D x L (mm) CASE CODE Dmax (mm) Lmax (mm) MASS (g) PACKAGING QUANTITIES (units per box) BOX DIMENSIONS lxwxh (mm) 22 x 25 22 x 30 22 x 35 22 x 40 25 x 25 25 x 30 25 x 35 25 x 40 25 x 45 25 x 50 30 x 25 30 x 30 30 x 35 30 x 40 30 x 45 30 x 50 35 x 25 35 x 30 35 x 35 35 x 40 35 x 45 35 x 50 2225 2230 2235 2240 2525 2530 2535 2540 2545 2550 3025 3030 3035 3040 3045 3050 3525 3530 3535 3540 3545 3550 23 23 23 23 26 26 26 26 26 26 31 31 31 31 31 31 36 36 36 36 36 36 27 32 37 42 27 32 37 42 47 52 27 32 37 42 47 52 27 32 37 42 47 52 12 16 20 23 20 22 24 27 32 38 25 30 35 40 45 50 33 40 48 55 63 72 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 260 x 250 x 39 260 x 250 x 44 260 x 250 x 49 260 x 250 x 54 290 x 280 x 39 290 x 280 x 44 290 x 280 x 49 290 x 280 x 54 290 x 280 x 59 290 x 280 x 64 340 x 330 x 39 340 x 330 x 44 340 x 330 x 49 340 x 330 x 54 340 x 330 x 59 340 x 330 x 64 390 x 198 x 39 390 x 198 x 44 390 x 198 x 49 390 x 198 x 54 390 x 198 x 59 390 x 198 x 64 1997 Jul 09 4 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 ELECTRICAL DATA AND ORDERING INFORMATION Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 C, P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL Ordering example Electrolytic capacitor PUM-SI 157 1000 F/200 V; 20% DESCRIPTION Nominal case size: 30 x 40 mm CR rated capacitance at 100/120 Hz IR rated RMS ripple current at 120 Hz, 85 C IL5 max. leakage current after 5 minutes at UR ESR typ. equivalent series resistance at 100 Hz; note 1 Catalogue number: 2222 157 52102. Note 1. ESR at 120 Hz is approximately 0.95 x ESR 100 Hz. Table 2 Electrical data and ordering information; preferred types in bold UR (V) 200 NOMINAL CASE SIZE D x L (mm) CASE CODE 270 22 x 25 2225 1.15 0.54 280 157 52271 330 22 x 30 2230 1.36 0.66 260 157 52331 390 22 x 30 2230 1.46 0.78 230 157 52391 470 22 x 35 2235 1.68 0.94 190 157 32471 25 x 30 2530 1.67 0.94 200 157 52471 22 x 40 2240 1.91 1.12 190 157 42561 25 x 35 2535 1.91 1.12 160 157 32561 30 x 25 3025 1.89 1.12 160 157 52561 25 x 40 2540 2.18 1.36 170 157 42681 30 x 30 3030 2.04 1.36 170 157 52681 35 x 25 3525 2.06 1.36 170 157 62681 25 x 45 2545 2.46 1.64 120 157 62821 30 x 35 3035 2.35 1.64 140 157 32821 35 x 30 3530 2.29 1.64 160 157 52821 30 x 40 3040 2.66 2.00 120 157 52102 35 x 30 3530 2.33 2.00 160 157 62102 CR 100 Hz (F) 560 680 820 1000 1200 1500 1997 Jul 09 IR 120 Hz 85 C (A) IL5 5 min (mA) TYP. ESR 100 Hz(1) (m) CATALOGUE NUMBER 2222 ... ..... 30 x 45 3045 2.98 2.40 100 157 32122 35 x 35 3535 2.69 2.40 130 157 62122 30 x 50 3050 3.31 3.00 90 157 42152 35 x 40 3540 3.04 3.00 110 157 52152 1800 35 x 45 3545 3.36 3.60 90 157 42182 2200 35 x 50 3550 3.68 4.40 80 157 52222 5 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in UR (V) 250 NOMINAL CASE SIZE D x L (mm) CASE CODE IR 120 Hz 85 C (A) IL5 5 min (mA) TYP. ESR 100 Hz(1) (m) CATALOGUE NUMBER 2222 ... ..... 220 22 x 30 2230 1.23 0.55 340 157 53221 270 22 x 30 2230 1.32 0.67 280 157 43271 25 x 25 2525 1.23 0.67 280 157 53271 22 x 35 2235 1.53 0.82 230 157 33331 25 x 30 2530 1.56 0.82 230 157 53331 22 x 40 2240 1.74 0.97 190 157 43391 30 x 25 3025 1.58 0.97 230 157 53391 25 x 35 2535 1.87 1.17 180 157 33471 30 x 30 3030 1.89 1.17 190 157 53471 25 x 40 2540 2.12 1.40 160 157 43561 30 x 30 3030 1.97 1.40 180 157 53561 35 x 25 3525 1.80 1.40 180 157 63561 25 x 45 2545 2.29 1.70 130 157 63681 30 x 35 3035 2.28 1.70 160 157 33681 35 x 30 3530 2.20 1.70 170 157 53681 30 x 40 3040 2.57 2.05 120 157 53821 35 x 35 3535 2.54 2.05 140 157 63821 30 x 45 3045 2.88 2.50 110 157 33102 35 x 40 3540 2.86 2.50 120 157 53102 1200 35 x 45 3545 3.17 3.00 100 157 43122 1500 35 x 50 3550 3.49 3.75 90 157 53152 CR 100 Hz (F) 330 390 470 560 680 820 1000 1997 Jul 09 PUM-SI 157 6 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in UR (V) 400 NOMINAL CASE SIZE D x L (mm) CASE CODE IR 120 Hz 85 C (A) IL5 5 min (mA) TYP. ESR 100 Hz(1) (m) CATALOGUE NUMBER 2222 ... ..... 68 22 x 25 2225 0.71 0.27 1180 157 56689 CR 100 Hz (F) 82 22 x 25 2225 0.77 0.33 990 157 56829 100 22 x 30 2230 0.94 0.40 930 157 56101 120 22 x 30 2230 0.97 0.48 870 157 56121 150 22 x 35 2235 1.13 0.60 700 157 36151 25 x 30 2530 1.16 0.60 680 157 56151 22 x 40 2240 1.29 0.72 590 157 46181 25 x 35 2535 1.35 0.72 550 157 36181 25 x 40 2540 1.54 0.88 520 157 46221 30 x 30 3030 1.50 0.88 470 157 56221 35 x 25 3525 1.42 0.88 470 157 66221 25 x 45 2545 1.72 1.08 400 157 66271 30 x 35 3035 1.74 1.08 380 157 36271 35 x 30 3530 1.71 1.08 400 157 56271 30 x 40 3040 1.97 1.32 320 157 56331 35 x 30 3530 1.76 1.32 370 157 66331 30 x 45 3045 2.19 1.56 270 157 56391 35 x 35 3535 2.04 1.56 300 157 36391 30 x 50 3050 2.40 1.88 240 157 46471 35 x 40 3540 2.30 1.88 250 157 56471 560 35 x 45 3545 2.55 2.24 210 157 46561 680 35 x 50 3550 2.79 2.72 190 157 56681 180 220 270 330 390 470 1997 Jul 09 PUM-SI 157 7 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in UR (V) 450 PUM-SI 157 NOMINAL CASE SIZE D x L (mm) CASE CODE IR 120 Hz 85 C (A) IL5 5 min (mA) 56 22 x 25 2225 0.68 0.25 1200 157 57569 68 22 x 30 2230 0.80 0.30 1230 157 57689 82 22 x 30 2230 0.87 0.36 1030 157 47829 25 x 25 2525 0.85 0.36 1030 157 57829 22 x 35 2235 1.00 0.45 840 157 37101 25 x 30 2530 1.02 0.45 860 157 57101 22 x 40 2240 1.15 0.54 710 157 47121 25 x 30 2530 1.09 0.54 710 157 57121 30 x 25 3025 1.10 0.54 710 157 67121 25 x 40 2540 1.35 0.67 570 157 47151 25 x 35 2535 1.27 0.67 600 157 67151 30 x 30 3030 1.32 0.67 600 157 57151 25 x 40 2540 1.45 0.81 480 157 47181 30 x 35 3035 1.49 0.81 490 157 57181 CR 100 Hz (F) 100 120 150 180 CATALOGUE NUMBER 2222 ... ..... 35 x 25 3525 1.35 0.81 490 157 67181 25 x 50 2550 1.73 0.99 400 157 47221 30 x 40 3040 1.72 0.99 410 157 57221 35 x 30 3530 1.61 0.99 440 157 67221 30 x 45 3045 1.95 1.21 340 157 37271 35 x 35 3535 1.86 1.21 360 157 67271 30 x 50 3050 2.19 1.48 280 157 47331 35 x 40 3540 2.10 1.48 300 157 57331 390 35 x 45 3545 2.34 1.75 250 157 47391 470 35 x 50 3550 2.60 2.11 210 157 57471 220 270 330 Note 1. ESR at 120 Hz is approximately 0.95 x ESR 100 Hz. 1997 Jul 09 TYP. ESR 100 Hz(1) (m) 8 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods 400 V versions Us = 1.1 x UR 250 V versions Us = 1.15 x UR Reverse voltage not allowed Current Leakage current after 5 minutes at UR IL5 0.01 x CR x UR all case sizes typ. 19 nH Inductance Equivalent series inductance (ESL) max. 25 nH Dissipation factor Tangent of loss angle 1997 Jul 09 tan 0.15 all types 9 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 RIPPLE CURRENT AND USEFUL LIFE Table 3 Multiplier of ripple current (IR) as a function of frequency FREQUENCY (Hz) handbook, full pagewidth IR MULTIPLIER 50 0.9 100 0.95 120 1.0 200 1.15 1000 1.3 10000 1.4 MGB264 2.4 IA IR 2.3 2.2 2.1 2.0 1.9 1.8 1.7 lifetime multiplier 1.6 1 1.2 1.5 1.5 2 1.4 2.5 3 4 1.3 5 8 1.2 10 15 1.1 (1) 20 30 1.0 60 80 0.8 0.5 0.0 40 50 60 70 80 90 100 Tamb ( oC) IA = actual ripple current at 120 Hz and 85 C. IR = rated ripple current at 120 Hz and 85 C. (1) Useful life at 85 C and IR applied: 2500 hours. Fig.4 Multiplier of useful life as a function of ambient temperature and ripple current load. 1997 Jul 09 10 Philips Components Product specification Non-solid Al - electrolytic capacitors Power Ultra Miniature Snap-in PUM-SI 157 SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in data handbook PA01, Section "Tests and Requirements". Table 4 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 C; UR applied; 2000 hours REQUIREMENTS C/C: 10% tan 2 x spec. limit IL5 spec. limit Tamb = 85 C; UR and IR applied; 2000 hours Load life C/C: 20% tan 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 C; UR and IR applied; 2500 hours C/C: 30% tan 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage: 3% Shelf life IEC 384-4/ (storage at CECC 30300 high temperature) subclause 4.17 Tamb = 85 C; no voltage applied; 1000 hours C/C: 15% tan 1.5 x spec. limit after test: UR to be applied for 30 minutes, IL5 1 x spec. limit 24 to 48 hours before measurement CAUTION CLEANING SOLVENTS, ADHESIVES, COATING MATERIALS Some cleaning agents, adhesives or coating materials have an adverse affect on electrolytic capacitors. For cleaning, varnishing, coating, lacquering, embedding or gluing at the capacitor's sealing, ensure that the materials used are halogene-free in all their constituent parts (base material, thinners, binders, reacting agents, propellants, additives). For further information regarding the correct use of electrolytic capacitors, please refer to data handbook PA01, Section "Application guidelines" . 1997 Jul 09 11