DRA4 CMX Series * 54mm 4 Channel DIN Rail Mount SSR Assembly * DC Ratings up to 200 VDC and 8 Amps * 3-10 and 20-28VDC control * Cage style screw terminals for easy connection * Fits standard 35mm DIN rail * Includes LED Status indicator PRODUCT SELECTION Description 3A 8 A (3) DRA4-CMX200D3 DRA4-CMXE200D3 DRA4-CMX100D10 DRA4-CMXE100D10 Description 3A 8 A (3) Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [Adc] Maximum Load Current [A] (2) (3) Minimum Load Current [A] Maximum On-State Resistence [Ohm] Maximum Surge Current (10msec) [Apk] Maximum On-State Voltage Drop @ Rated Current [VDC] 1-200 100 3 0 0.2 30 0.6 1-100 100 8 0 0.01 100 0.1 3-10 VDC Control 20-28 VDC Control OUTPUT SPECIFICATIONS (1) INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [sec] DRA4-CMX DRA4-CMXE 3.0-10.0 VDC 3.0 VDC 1 .0 VDC 15 mAdc @ 5Vdc 300 Ohm 1 300 20.0-28.0 VDC 20.0 VDC 1 .0 VDC 12 mAdc @ 20 Vdc 780 Ohm 1 300 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength (4) Minimum Insulation Resistance (@ 500 VDC)(4) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation 2500 Vrms 109 Ohms 15 pF -30 to 80C -30 to 125C 0.23 oz. (104.6g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) See derating chart on page 3. 3) Steady state load Current exceeding 8 amps will damage socket. 4).Dielectric and insulation resistance is measured between input and output. MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 3 and 10A CMX relays only Rv. 110811 ANNEX - ENVIROMENTAL INFORMATION