www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.123/01/13
Proto Sheild Supplemental Kit
Does NOT include Freescale Freedom Platform
Description:
The Proto Shield Supplement Kit for the Freescale Kinetis
KL25Z Freedom Platform contains the items specied in the
table below
Description Qty Part Number
Samtec Socket, 2.54mm, 1 × 6 Pos 1 SSW-106-01-T-S
Samtec Socket, 2.54mm, 1 × 8 Pos 2 SSW-108-01-T-S
Samtec Socket, 2.54mm, 1 × 10 Pos 1 SSW-110-01-T-S
Samtec Header, 2.54mm, THT VERT, 2 Pos 3 TSW-102-07-T-S
Multicomp Mini USB cable 1 SPC20060
Arduino Proto Shield Kit 1 A000083
Arduino Proto Shield Kit Content:
Material Qty
Straight single line pinhead connectors 40 × 1 1
Straight single line pinhead connectors 3 × 2 1
PCB Pushbutton 2
Red LED 1
Yellow LED 1
Green LED 1
10KΩ Resistors 1/4W 5
220Ω Resistors 1/4W 5
1KΩ Resistors 1/4W 5
Ordering Information
Description Part Number
Proto Shield Supplemental Kit, Kinetis KL25Z Freescale Freedom Platform FRDMKL25Z SHIELD BUNDLE
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.123/01/13
Proto Sheild Supplemental Kit
Does NOT include Freescale Freedom Platform
This special bundle includes headers that can be soldered to the board to give you access to additional Arduino™-compatible
hardware – commonly referred to as “Shields”.
To attach the single row headers to the Freedom Platform, please reference the “FRDM-KL25Z Single Row/Arduino Header
Layout” diagram. Attaching these headers to the outside row of I/O holes on the board give you access to the unlimited potential
of access to peripherals designed for Arduino™-compatible hardware. Using optional dual row headers are also acceptable, but
are not needed to use Arduino™-compatible hardware/ shields.
Attaching Single Row Headers to the Freedom Platform
Header Positions on Board
SAMTEC SSW-106-01-T-S J10
SAMTEC SSW-108-01-T-S J1,J9
SAMTEC SSW-110-01-T-S J2
SAMTEC TSW-102-07-T-S J3, J4, J11 *
* Three of these headers have been included for additional/ advanced features that are available on positions J3, J4, and J11
and are not necessary for use with Arduino™-compatible hardware/ shields . Details of their functionality can be found in the
Freedom Platform documentation.
Note:
This bundle can also be used with the Freedom Development Platform KL05Z - Newark Order Code 53W2646
On the Proto Shield PCB you will nd:
• ICSP header
• Led1 and Led2 headers (with resistor headers)
• S1 Button header
• SOIC prototyping area up to 14-pin SOIC chip, narrow medium or wide package.
• 10 bigger holes for special needs
• Long and easy-to-solder ground / 5V rails
The 1.0 standard pinout consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication,
and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted.
The last one is not connected and is reserved for future uses.