SURFACE MOUNT DISPLAY APPSA04-41MBWA BLUE Features Description !0.4 INCH CHARACTER HEIGHT. The Blue source color devices are made with GaN on !LOW CURRENT OPERATION. SiC Light Emitting Diode. !HIGH CONTRAST AND LIGHT OUTPUT. Static electricity and surge damage the LEDS. It is ! EASY recommended to use a wrist band or anti- MOUNTING ON P.C. BOARDS OR SOCKETS. !CATEGORIZED FOR LUMINOUS INTENSITY. electrostatic glove when handling the LEDs. !MECHANICALLY RUGGED. All devices, equipment and machinery must be !GRAY FACE, WHITE SEGMENT. electrically grounded. ! PACKAGE :800PCS / REEL. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB3097 APPROVED : J. Lu REV NO: V.3 CHECKED: Joe Lee DATE:APR/03/2003 DRAWN:Y.H.LI PAGE: 1 OF 5 Selection Guide P ar t N o . Dic e APPSA04-41MBWA Iv (u c d ) @ 10 m A L en s Ty p e BLUE (GaN) WHITE DIFFUSED Min . Ty p . 800 3800 D es c r i p t i o n Common Anode, Rt. Hand Decimal Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e peak Peak Wavelength Blue D Dominate Wavelength 1/2 Ty p . Max . Un its Tes t Co n d it io n s 430 nm I F =20mA Blue 466 nm I F =20mA Spectral Line Half-width Blue 60 nm I F =20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V I F =20mA IR Reverse Current Blue 10 uA V R = 5V Absolute Maximum Ratings at TA=25C P ar am et er B lu e Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB3097 APPROVED : J. Lu REV NO: V.3 CHECKED: Joe Lee DATE:APR/03/2003 DRAWN:Y.H.LI PAGE: 2 OF 5 Blue APPSA04-41MBWA SPEC NO: DSAB3097 APPROVED : J. Lu REV NO: V.3 CHECKED: Joe Lee DATE:APR/03/2003 DRAWN:Y.H.LI PAGE: 3 OF 5 APPSA04-41MBWA SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) SPEC NO: DSAB3097 APPROVED : J. Lu REV NO: V.3 CHECKED: Joe Lee DATE:APR/03/2003 DRAWN:Y.H.LI PAGE: 4 OF 5 Tape Specifications (Units : mm) SPEC NO: DSAB3097 APPROVED : J. Lu REV NO: V.3 CHECKED: Joe Lee DATE:APR/03/2003 DRAWN:Y.H.LI PAGE: 5 OF 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: APPSA04-41MBWA