25.4mm (1.0 INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA10-21YWA Yellow Features Description z 1.0 inch digit height. The Yellow source color devices are made with Gallium z Low current operation. Arsenide Phosphide on Gallium Phosphide Yellow Light z Excellent character appearance. Emitting Diode. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 Selection Guide Part No. Dice SA10-21YWA Iv (ucd) [1] @ 10mA Lens Type Yellow (GaAsP/GaP) Min. Typ. 9000 23000 *3600 *7000 White Diffused Description Common Anode, Rt.Hand Decimal Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) Yellow 4.2 (2.1) 5.0 (2.5) V IF=20mA IR Reverse Current (Per chip) Yellow 10 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation (DP) 150 (75) mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 (5) V Reverse Voltage (Per chip) Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 Yellow SA10-21YWA SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 PACKING & LABEL SPECIFICATIONS SA10-21YWA SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM9669 REV NO: V.1A DATE: APR/20/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000176 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: SA10-21YWA