This document was generated on 01/18/2019
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
Part Number: 0907793004
Status: Active
Overview: Picoflex Ribbon-Cable Connectors
Description: Picoflex PF-50 Header, Vertical, Low Profile, High Temperature Surface Mount
Capable, PdNi with Gold Flash Plating , 10 Circuits, Glow-Wire Capable
Documents:
3D Model Packaging Specification PK-90325-002-001 (PDF)
Drawing (PDF) RoHS Certificate of Compliance (PDF)
Product Specification PS-99020-0011-001 (PDF)
Agency Certification
UL E29179
General
Product Family PCB Headers
Series 90779
Application Signal, Wire-to-Board
Application Tooling Part Link 69008-1070
Comments """""""This Molex product is manufactured from material
that has the following ratings, tested by independent
agencies:. a) A Glow Wire Ignition Temperature (GWIT)
of at least 775 deg C per IEC 60695-2-13.. b) A Glow
Wire Flammability Index (GWFI) above 850 deg C
per IEC 60695-2-12.and hence complies with the
requirements set out in the International Standard IEC
60335-1 5th edition - household and similar electrical
appliances - safety, section 30 Resistance to heat
and fire. <P><P> The customers using this product
must determine its suitability for use in their particular
application through testing or other acceptable means
as described in end-product glow-wire flammability
test standard IEC 60695-2-11 and any applicable
product end-use standard(s). <P> If it is determined
during the customer’s evaluation of suitability, that
higher performance is required, please contact Molex
for possible product options.""""""""""""""", """""""This
Molex product is manufactured from material that has
the following ratings, tested by independent agencies:.
a) A Glow Wire Ignition Temperature (GWIT) of at
least 775 deg C per IEC 60695-2-13.. b) A Glow
Wire Flammability Index (GWFI) above 850 deg C
per IEC 60695-2-12.and hence complies with the
requirements set out in the International Standard IEC
60335-1 5th edition - household and similar electrical
appliances - safety, section 30 Resistance to heat
and fire. <P><P> The customers using this product
must determine its suitability for use in their particular
application through testing or other acceptable means
as described in end-product glow-wire flammability test
standard IEC 60695-2-11 and any applicable product
end-use standard(s). <P> If it is determined during
the customer’s evaluation of suitability, that higher
performance is required, please contact Molex for
possible product options."""""""""""""""
Overview Picoflex Ribbon-Cable Connectors
Product Name Picoflex
Series image - Reference only
EU ELV
Not Relevant
EU RoHS China RoHS
Compliant
REACH SVHC
Not Contained Per -
ED/61/2018 (27 June
2018)
Halogen-Free
Status
Not Low-Halogen
For more information, please visit Contact US
China ROHS Green Image
ELV Not Relevant
RoHS Phthalates Not Contained
Search Parts in this Series
90779 Series
Mates With
90327 IDT Connector
Application Tooling | FAQ
Tooling specifications and manuals are
found by selecting the products below.
Crimp Height Specifications are then
contained in the Application Tooling
Specification document.
Global
Description Product #
Extraction Tool
(Plastic) for 4-26
Circuit
690081070
UPC 800753512849
Physical
Breakaway No
Circuits (Loaded) 10
Circuits (maximum) 10
Color - Resin Natural
Durability (mating cycles max) 100
First Mate / Last Break No
Flammability 94V-0
Glow-Wire Capable Yes
Guide to Mating Part No
Keying to Mating Part None
Lock to Mating Part Yes
Material - Metal Brass
Material - Plating Mating Gold over Palladium Nickel
Material - Resin High Temperature Thermoplastic
Net Weight 0.451/g
Number of Rows 1
Orientation Vertical
PCB Locator Yes
PCB Retention Yes
PCB Thickness - Recommended 1.60mm
Packaging Type Bag
Pitch - Mating Interface 1.27mm
Pitch - Termination Interface 1.27mm
Plating min - Mating 0.762µm
Plating min - Termination 3.048µm
Polarized to Mating Part Yes
Polarized to PCB Yes
Shrouded No
Stackable No
Surface Mount Compatible (SMC) Yes
Temperature Range - Operating -40° to +105°C
Termination Interface: Style Through Hole
Electrical
Current - Maximum per Contact 1.2A
Voltage - Maximum 250V
Solder Process Data
Lead-freeProcess Capability WAVE
Material Info
Reference - Drawing Numbers
Packaging Specification PK-90325-002-001
Product Specification PS-99020-0011-001
Sales Drawing SDA-90779
This document was generated on 01/18/2019
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
