Technical Support : (888) 41 - ASTEC or (407) 241-2752
Americas : (760) 930-4600 Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662
Electrical Specs
Special Features
1600 Watts
AIF - PFC Series
•Unity power factor
•High efficiency - up to 95%
•Universal input voltage and frequency range
•Up to 1600W output power
•Positive and Negative enable function
•Parallelable with accurate current sharing
•<10% harmonic distortion conforming to
IEC1000-3-2 Compliance
•100°C baseplate operating temperature
•DC Input option
•Power fail warning signal
•Enable output to control DC-DC Converter
•EEPROM data storage via I2C Interface
•External inrush current limited protection
•Power Density up to 290W/in3
Environmental
Operating temperature
-40°C to +100°C (baseplate temperature)
Storage temperature: -40°C to +120°C
Overtemperature protection: 120°C max
Calculated MTBF: 450K hours
Input
Input range 85 - 264VAC / 120 - 370VDC
(Configurable)
Input Surge 290VAC / 1s
Input Frequency 50/60 Hz
Efficiency 95% @230Vac, 1600W (Typ)
Total Harmonic Distortion Less than 10%
Power Factor 0.99 typical (Po ≥ 500W);
0.97 typical (Po ≥ 1000W)
Control
Power Fail Warning Direct drive output to opto-isolator
Power Fail Warning Adjust 195 to 355Vdc adjustable
LD Enable Direct drive output to opto-isolator
PFC Enable TTL compatiable (Pos and Neg)
Voltage Adjust 76% to 100% Vo
DC Input Enable
Clock Input (external sync)6Vp-p typical @ 1MHz ± 5%
Clock Output (int. clock) 6Vp-p typical @ 1MHz ± 5%
Temperature
Monitor Output 10mV/°C
Current Monitor Output 0 to 1mA (1mA = 4.2A output)
I2C Interface
Output
Output Voltage 380V typical(Io =4.2A / Vi>180Vac)
393V typical (Io = 0A)
Current Share Accuracy 10% max
Overvoltage Protection 430 max
Power Limit for AC input Vin = 85Vac, Pmax = 1000W
Vin = 230Vac, Pmax = 1600W
for DC input Vin = 370Vdc, Pmax =1600W
Not
Nominal values apply with sense pins connected and other
control pin unconnected.
Specifications subject to change without notice.
Safety
UL cUL 60950 Recognized
TUV EN60950 Licensed
Total Power: 1600 Watts
Input Voltages: 85 - 264VAC
No. of Outputs: Single
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
Ordering Information
www.astecpower.com Rev08 September 2005
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Model Number Description Notes
AIF04ZPFC-01 1600W Low Profile PFC Module For parallel operation the total input current must be < 16Arms.
AIF04ZPFC-02 1600W Low Profile PFC Module Designed for parallel operation where the total input current
>16Arms, requires external rail rectifiers.
AIF04ZPFC-01N Negative Enable
AIF04ZPFC-02N Negative Enable
Note: 1. For Non-thread insert, add suffix “NT”
Pin AssignmentsPin Assignments
AIF04ZPFC-xxxNT AIF04ZPFC-xxx
