Series EB Light Touch Miniature Pushbuttons
C24
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): 3A @ 125V AC for silver contacts
Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum for gold contacts
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold
Insulation Resistance: 1,000 megohms minimum @ 500V DC
Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts and case for 1 minute minimum
Mechanical Life: 100,000 operations minimum
Electrical Life: 25,000 operations minimum for silver;
50,000 operations minimum for gold
Nominal Operating Force: Single Pole: 1.75N for Momentary and 2.49N for Alternate Action
Double Pole: 2.30N for Momentary and 3.05N for Alternate Action
Travel: Momentary: Pretravel .047” (1.2mm); Overtravel .016” (0.4mm); Total Travel .063” (1.6mm)
Alternate: Pretravel .071” (1.8mm); Overtravel .016” (0.4mm); Total Travel .087” (2.2mm)
Materials & Finishes
Plunger: Brass with nickel plating
Bushing: Brass with nickel plating
Frame: Stainless steel
Case: Melamine phenolic resin (UL94V-0)
Movable Contacts: Copper with silver or gold plating
Stationary Contacts: Silver & copper with silver or gold plating
Terminals: Copper with silver or gold plating
Environmental Data
Operating Temp Range: –10°C through +70°C (+14°F through +158°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Mounting Torque: 1.47Nm (13.0 lb•in) for double nut; 0.68Nm (6.0 lb•in) for single nut
Cap Installation Force: 78.5N (17.65 lbf) maximum downward force on actuator
Soldering Time & Temp: Wave Solder (Straight PC): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL94V-0 case
UL: File No. E44145 - Recognized only when ordered with marking on switch.
Add “/U” or “/CUL” before first dash in part number to order UL recognized switch.
All single and double pole models recognized at 3A @ 125V AC.
CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch.
Add “/C” before first dash in part number to order CSA certified switch.
Single pole solder lug and PC models certified at 3A @ 125V AC; double pole PC models certified
at 3A @ 125V AC.
7/10/17
Series EB
Light Touch Miniature Pushbuttons
C25
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
Distinctive CharacteristicsDistinctive Characteristics
Power and logic level capabilities available to suit varying applications.
Bushing and snap-in mount versions available; snap-in models offer
many style and color choices to enhance front panel appearance.
Light touch actuation.
High torque bushing prevents rotation and separation from
metal frame during installation.
Stainless steel frame resists corrosion.
Case of heat resistant resin meets UL 94V-0 flammability
rating.
Higher insulating barriers protect against crossover in
double pole devices.
1,500V dielectric strength between contacts and case
is accomplished by clinching the frame away from the
terminals.
Epoxy sealed terminals prevent entry of solder flux and
other contaminants.
Actual Size
Bushing Mount Page C26
Snap-in Mount Page C30
Series EB Light Touch Miniature Pushbuttons
C26
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
Colors
ABlack
BWhite
CRed
EYellow
FGreen
GBlue
HGray
TYPICAL SWITCH ORDERING EXAMPLE
F65 BEB20
SPDT
ON-ON Circuit
Silver Contacts & Solder Lug
Terminals with 3-Amp Rating
Poles & Circuits
11 SPDT ON (ON)
65 SPDT ON ON
61 DPDT ON (ON)
85 DPDT ON ON
( ) = Momentary
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
EB2065-BF
Caps
B.315” (8.0mm) Dia.
C.394” (10.0mm) Dia.
Contacts, Ratings, & Terminals
No
Code
Silver Contacts; Solder Lug Terminals
3A @ 125V AC
GGold Contacts; Solder Lug Terminals
0.4VA max @ 28V AC/DC max
PSilver Contacts; Straight PC Terminals;
3A @ 125V AC
PG Gold Contacts; Straight PC Terminals
0.4VA max @ 28V AC/DC max
Green .315” (8.0mm)
Diameter Cap
IMPORTANT:
Switches are supplied without UL, cULus & CSA marking unless specified.
UL, cULus & CSA recognized only when ordered with marking on the switch.
Specific models, ratings, & ordering instructions are noted on the General
Specifications page.
Series EB
Light Touch Miniature Pushbuttons
C27
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
Plunger Position
( ) = Momentary Connected Terminals Throw & Switch Schematics
Pole Model
Normal Down Normal Down
Note: Terminal numbers are not
actually on the switch.
SP EB2011
EB2065
ON
ON
(ON)
ON 2-3 2-1 SPDT
DP EB2061
EB2085
ON
ON
(ON)
ON 2-3 5-6 2-1 5-4 DPDT
POLES & CIRCUITS
Keyway
Keyway
CONTACT MATERIALS, RATINGS, & TERMINALS
PCB Footprints
Solder Lug
Silver Contacts Power Level 3A @ 125V AC
Complete explanation of operating range in Supplement section.
GSolder Lug
Gold Contacts Logic Level 0.4VA max @ 28V AC/DC max
Straight PC
Silver Contacts Power Level 3A @ 125V AC
Straight PC
Gold Contacts Logic Level 0.4VA max @ 28V AC/DC max
Epoxy Seal
(2.0)
.079
(4.0)
.157
(2.0)
.079 (1.1)
.043
Thk (0.7)
.028
(0.5) Com
.020
Complete explanation of operating range in Supplement section.
Epoxy Seal
(1.2)
.047
(4.3)
.169
(6.4)
.252
Thk (0.7)
.028
(0.5) Com
.020
1
3
2
6
5
4
(4.7)
.185
(3.9) Typ
.154
(1.8) Dia Ty
p
.071
Double Pole
Single Pole
1
3
2(3.9) Typ
.154
(1.8) Dia Typ
.071
No
Code
P
PG
2 (COM)
1
3
4613
25(COM)
Series EB Light Touch Miniature Pushbuttons
C28
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
CAPS & COLORS
TYPICAL SWITCH DIMENSIONS
Solder Lug Single Pole
Solder Lug Double Pole
B
Cap Colors
Available:
A
B
C
AT443
.315” (8.0mm) Diameter Snap-on Cap AT442
.394” (10.0mm) Diameter Snap-on Cap
Momentary
Plunger Length
EB2011-BA
EB2061-BA
E
F
G
H
Plunger Extension
Due to a difference in plunger lengths on the momentary and alternate action models, cap distance from top of bushing varies.
Cap Material: Polycarbonate Finish: Glossy
C
Cap Colors
Available:
A
B
C
E
F
G
H
Cap Material: Polycarbonate Finish: Glossy
Black
White
Red
Yellow
Green
Blue
Gray
Black
White
Red
Yellow
Green
Blue
Gray
Momentary
Cap Location
Alternate
Plunger Length
Alternate
Cap Location
(7.0)
.276
Keyway
(11.0)
.433
(3.9) Ty
p
.154
(0.5)
.020
(4.0) Typ
.157
(4.5)
.177
For Momentary Devices
(8.5)
.335
(7.6)
.299
(18.0)
.709
(6.8)
.268
(1.4)
.055
(0.7) Typ
.028
(1.1) x (2.0) Typ
.043 x .079
M6 P0.75
(8.0) Dia
.315
3
2
1
(2.0) Ty
p
.079
COM
(11.7)
.461
Keyway
(11.0)
.433
(3.9) Ty
p
.154
(0.5)
.020
(4.0) Typ
.157
(4.5)
.177
For Momentary Devices
(8.5)
.335
(7.6)
.299
(18.0)
.709
(6.8)
.268
(1.4)
.055
(0.7) Typ
.028
(1.1) x (2.0) Typ
.043 x .079
M6 P0.75
(8.0) Dia
.315
3
2
1
(2.0) Ty
p
.079
4
5
6
COM
(4.7)
.185
(8.0) Dia
.315
(7.6)
.299
(8.0
)
.315
(10.0) Di
a
.394
(2.7)
.106
(1.2)
.047
(2.5)
.098
(1.4)
.055
(2.3) Dia
.091 (2.85) Dia
.112
(8.0)
.315
(2.3) Dia
.091 (2.85) Dia
.112
(9.3)
.366
(3.3) Dia
.130
Series EB
Light Touch Miniature Pushbuttons
C29
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
HARDWARE
Installation/Assembly
2 AT513M Metric Hexagon Nuts
1 AT509 Internal Tooth Lockwasher AT513M
Metric Hexagon Nut
Material:
Brass with
Nickel Plating
AT509
Lockwasher
Material:
Steel with
Zinc/Chromate
Metric Bushing
Without
Bottom Hex Nut
See Accessories & Hardware section for optional Conical Nuts:
AT512M used with cap AT443 and AT512CM used with cap AT442.
(6.35) Dia
.250
(5.6)
.220
(0.6)
.024
(6.35) Dia
.250
AT507M
Metric Locking Ring
Material:
Steel with
Zinc/Chromate
(8.0)
.315
M6 P0.75
(9.0)
.354
(1.5)
.059
(2.0)
.079
(5.5)
.217
(6.0) Dia
.236
(12.0) Dia
.472
(1.7)
.067
(0.8)
.031
(6.4) Dia
.252
(10.2) Dia
.402
(0.5)
.020
Optional Hardware:
AT507M Metric Locking Ring
Standard Hardware Optional Hardware
(8.0) Dia
.315
(0.8)
.031
(2.5)
.098
M6 P0.75
(1.7)
.067
(8.5)
.335
With
Standard Hardware
Face Nut
Locking Ring
(Optional)
Lockwasher
Lock Nut
With Standard Hardware
& Optional Locking Ring
(6.5) Dia
.256
(6.5)
.256
(2.2) Dia
.087
PANEL CUTOUTS & THICKNESSES
Maximum Effective
Panel Thickness:
.185” (4.7mm)
Maximum Effective
Panel Thickness:
.118” (3.0mm)
Maximum Effective
Panel Thickness:
.055” (1.4mm)
Note: Cap must be snapped on
after the switch is mounted
into the panel.
Series EB Light Touch Miniature Pushbuttons
C30
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
TYPICAL SWITCH ORDERING EXAMPLES
Silver Contacts & Solder Lug
Terminals with 3-Amp Rating
SPDT
ON-(ON) Circuit
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE WITHOUT BEZEL
EB2011-A-J40
J2311 BEB20
Poles & Circuits
11 SPDT ON (ON)
65 SPDT ON ON
61 DPDT ON (ON)
85 DPDT ON ON
( ) = Momentary
Contacts, Ratings, & Terminals
No
Code
Silver Contacts; Solder Lug Terminals
3A @ 125V AC
GGold Contacts; Solder Lug Terminals
0.4VA max @ 28V AC/DC max
PSilver Contacts; Straight PC Terminals;
3A @ 125V AC
PG Gold Contacts; Straight PC Terminals
0.4VA max @ 28V AC/DC max
Cap Colors
ABlack
BWhite
CRed
EYellow
FGreen
GBlue
HGray
Cap Extensions & Bezel Types
Low Rise High Rise
Momen-
tary Alter-
nate Momen-
tary Alter-
nate Description
J20 J30 J40 J50 Without Bezel
J21 J31 J41 J51 Bezel without LED
J22 J32 J42 J52 Bezel with 1 Round LED
J23 J33 J43 J53 Bezel with 2 Round LEDs
J24 J34 J44 J54 Bezel with 2 Rectangular LEDs
Without Bezel
Black Cap with
High Rise Extension
IMPORTANT:
Switches are supplied without UL, cULus & CSA marking
unless specified.
UL, cULus & CSA recognized only when ordered with
marking on the switch.
Specific models, ratings, & ordering instructions are noted
on the General Specifications page.
Series EB
Light Touch Miniature Pushbuttons
C31
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
Bezel Colors
TYPICAL SWITCH ORDERING EXAMPLES
2 LEDs
Top LED Bottom LED
CRed CRed
EYellow EYellow
FGreen FGreen
1 LED
CRed
FGreen
A
Bezel with 2 Round or
Rectangular LEDs
ABlack
Bezel with 1 Round LED
ABlack
Bezel without LEDs
ABlack FGreen
BWhite GBlue
CRed HGray
EYellow
F
C
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE WITH BEZEL
EB2011-B-J23ACF
SPDT
ON-(ON) Circuit
Silver Contacts & Solder Lug
Terminals with 3-Amp Rating
Black Bezel with 2 Round LEDs:
Top LED Red
Bottom LED Green
White Cap with
Low Rise Extension
Led Colors
Series EB Light Touch Miniature Pushbuttons
C32
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
CONTACT MATERIALS, RATINGS, & TERMINALS
PCB Footprints
Solder Lug
Silver Contacts Power Level 3A @ 125V AC
Complete explanation of operating range in Supplement section.
GSolder Lug
Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum
Straight PC
Silver Contacts Power Level 3A @ 125V AC
Straight PC
Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum
Epoxy Seal
(2.0)
.079
(4.0)
.157
(2.0)
.079 (1.1)
.043
Thk (0.7)
.028
(0.5) Com
.020
Complete explanation of operating range in Supplement section.
Epoxy Seal
(1.2)
.047
(4.3)
.169
(6.4)
.252
Thk (0.7)
.028
(0.5) Com
.020
1
3
2
6
5
4
(4.7)
.185
(3.9) Typ
.154
(1.8) Dia Ty
p
.071
Double Pole
Single Pole
1
3
2(3.9) Typ
.154
(1.8) Dia Ty
p
.071
No
Code
P
PG
Plunger Position
( ) = Momentary Connected Terminals Throw & Switch Schematics
Pole Model
Normal Down Normal Down
Note: Terminal numbers are not
actually on the switch.
SP EB2011
EB2065
ON
ON
(ON)
ON 2-3 2-1 SPDT
DP EB2061
EB2085
ON
ON
(ON)
ON 2-3 5-6 2-1 5-4 DPDT
POLES & CIRCUITS
Keyway
Keyway
4
61
3
25(COM)
2 (COM)
1
3
Series EB
Light Touch Miniature Pushbuttons
C33
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
CAP EXTENSIONS & BEZEL TYPES
Cap
Extension
without
Bezel Low Rise
Momentary
Cap
Extension
with
Bezel
J20 J40 J50
CAP COLORS
Factory Assembled on the Switch:
Square snap-on cap AT465, snap-in mounter
AT529, and optional bezels which follow.
A B C E
FG H
Black White Red Yellow
Green Blue Gray
J30
Low Rise
Alternate
High Rise
Momentary
High Rise
Alternate
(11.0)
.433
(4.5)
.177
(2.8
)
.110
(2.2)
.087
(11.0)
.433
(4.5)
.177
(2.8
)
.110
(3.3)
.130
(11.0)
.433
(3.4)
.134
(2.8
)
.110
(3.3)
.130
(11.0)
.433
(3.4)
.134
(2.8
)
.110
(4.4)
.173
(15.0)
.591
(12.5)
.492
3
2
1
COM
(2.0) Typ
.079
(7.0)
.276
(11.0)
.433
(14.0)
.551
(11.5) Sq
.453
(18.0)
.709
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
.028
(3.9) Ty
p
.154
(4.0) Typ
.157
(0.5)
.020
(4.5)
.177
(3.4)
.134
(2.8)
.110
(11.0)
.433
(18.0)
.709
(3.3)
.130
For Momentary Devices
Part No.
(12.2)
.480
Low Rise
Momentary
J21 J41 J51J31
Low Rise
Alternate
High Rise
Momentary
High Rise
Alternate
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2)
.087
(1.0)
.039
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(3.2)
.126
Low Rise Double Pole EB2061-B-J21A
Maximum Panel Thickness
.039” ~ .126” (1.0mm ~ 3.2mm)
Cutout applies to SP & DP
High Rise Single Pole EB2011-A-J40
A
B
C
E
F
G
H
Black
White
Red
Yellow
Green
Blue
Gray
AT207 Bezel
without LED
(15.0)
.591
(12.5)
.492
Material:
Polycarbonate
Finish:
Glossy
(11.8)
.465
(21.5)
.846
(12.0)
.472
(15.6)
.614
(2.2)
.087
(15.6)
.614
Part No.
(10.0)
.394
(11.5) Sq
.453
(21.5)
.846
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
.028
(3.9) Ty
p
.154
(4.0) Typ
.157
(0.5)
.020
(4.5)
.177
(4.5)
.177
(2.8)
.110
(18.0)
.709
(1.0)
.039
For Momentary Devices
(2.2)
.087
(2.0) Typ
.079
3
2
1
(4.7)
.185
(11.0)
.433
(14.0)
.551
6
5
4
COM
Maximum Panel Thickness
.039” ~ .157” (1.0mm ~ 4.0mm)
Cutout applies to SP & DP
Series EB Light Touch Miniature Pushbuttons
C34
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
(21.5) Sq
.846
(11.8)
.465
(10.0)
.394
(12.0)
.472
(2.2)
.087
(7.8)
.307
(3.0) Dia Typ
.118
(8.0)
.315
(30.2)
1.19
(19.0)
.748
(12.0)
.472
(11.8)
.465
(13.5)
.531
(15.6)
.614
(5.4) Dia
.213
(2.2)
.087
CAP EXTENSIONS & BEZEL TYPES
Cap
Extension
with
Bezel Low Rise
Momentary
J22 J42 J52J32
Low Rise
Alternate
High Rise
Momentary
High Rise
Alternate
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2)
.087
(1.0)
.039
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(3.2)
.126
EB2011-B-J42AC High Rise Single Pole
ABlack
AT208 Bezel with
1 Round LED (AT070 LED)
Material: Polycarbonate
Finish: Glossy
LED colors and
specifications on
next to last page
of this EB section.
Cap
Extension
with
Bezel Low Rise
Momentary
J23 J43 J53J33
Low Rise
Alternate
High Rise
Momentary
High Rise
Alternate
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2)
.087
(1.0)
.039
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(3.2)
.126
EB2065-B-J33ACF Low Rise Single Pole
Maximum Panel Thickness
.039” ~ .126” (1.0mm ~ 3.2mm)
Cutout applies to SP & DP
ABlack
AT212 Bezel with
2 Round LEDs (AT617 LEDs)
Material: Polycarbonate
Finish: Glossy
LED colors and
specifications on
next to last page
of this EB section.
(18.4)
.724
(15.0)
.591
3
2
1
COM
(2.0) Typ
.079
(7.0)
.276
(11.0)
.433
(14.0)
.551
(10.0)
.394
(11.5) Sq
.453
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
.028
(3.9) Ty
p
.154
(4.0) Typ
.157
(0.5)
.020
(4.5)
.177
(4.5)
.177
(2.8)
.110
(18.0)
.709
(2.1)
.083
For Alternate Devices
(2.2)
.087
(10.0)
.394
(7.8)
.307
(8.0)
.315
(3.0) Dia
Typ
.118
(11.8)
.465
(21.5) Sq
.846
(12.0)
.472
3
2
1
COM
(2.0)
.079
(7.0)
.276
(11.0)
.433
(14.0)
.551
(2.5)
.098
3
2
1
COM
(2.0)
.079
(7.0)
.276
(11.0)
.433
(14.0)
.551
(2.5)
.098
(10.0)
.394
(11.5) Sq
.453
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
.028
(3.9) Typ
.154
(4.0) Typ
.157
(0.5)
.020
(4.5)
.177
(3.4)
.134
(2.8)
.110
(18.0)
.709
(2.1)
.083
For Momentary Devices
(2.2)
.087
(30.2)
1.190
(15.3) Min
.602
(4.9)
.193 (0.61) Sq
.024
(12.0)
.472
(5.4) Dia
.213 (19.0)
.748
(13.5)
.531
(11.8)
.465(15.6)
.614
Maximum Panel Thickness
.039” ~ .126”
(1.0mm ~ 3.2mm)
Cutout applies to SP & DP
(6.25)
.246
(13.8)
.543
(8.8) Dia
.346
(15.0)
.591
(12.5)
.492
Series EB
Light Touch Miniature Pushbuttons
C35
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
CAP EXTENSIONS & BEZEL TYPES
Cap
Extension
with
Bezel Low Rise
Momentary
J24 J44 J54J34
Low Rise
Alternate
High Rise
Momentary
High Rise
Alternate
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2
)
.087
(1.0)
.039
(10.0)
.394
(4.5)
.177
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(2.1)
.083
(10.0)
.394
(3.4)
.134
(2.8
)
.110
(2.2
)
.087
(3.2)
.126
High Rise Double Pole EB2085-B-J54ACF
Maximum Panel Thickness
.039” ~ .126” (1.0mm ~ 3.2mm)
Cutout applies to SP & DP
ABlack
Material: Polycarbonate
Finish: Glossy
LED colors and
specifications on
next page of this
EB section.
(18.4)
.724
(15.0)
.591
(10.0)
.394
(7.8)
.307
(12.0)
.472
(8.0)
.315
(5.0)
Typ
.197
(2.0)
.079 (11.8)
.465
(21.5) Sq
.846
(10.0)
.394
(11.5) Sq
.453
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
.028
(3.9) Ty
p
.154
(4.0) Typ
.157
(0.5)
.020
(4.5)
.177
(3.4)
.134
(2.8)
.110
(18.0)
.709
(3.2)
.126
For Alternate Devices
(2.2)
.087 (2.0) Typ
.079
3
2
1
COM
(4.7)
.185
(11.0)
.433
(14.0)
.551
6
5
4
(11.8)
.465
(10.0)
.394 (12.0)
.472
(2.2)
.087
(7.8)
.307
(21.5) Sq
.846
(5.0) Typ
.197
(8.0)
.315
(2.0) Typ
.079
AT213 Bezel with
2 Rectangular LEDs (AT618 LEDs)
Series EB Light Touch Miniature Pushbuttons
C36
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
LED COLORS & SPECIFICATIONS
Bezel Orientation on Switch
AT070 LED
For Bezel AT208
with 1 LED
AT617 LED
For Bezel AT212
with 2 Round LEDs
AT618 LED
For Bezel AT213
with 2 Rectangular LEDs
Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+).
Circuit Mark This Side
Top LED
Bottom LED
Circuit Mark This Side
Top LED
Bottom LED
Circuit Mark This Side
(+)
(-)
(5.0)
.197
(3.0) Dia
.118
(+)
(-)
(7.0)
.276
(5.0)
.197
(+)
(-)
AT070 AT617 AT618
Color Red Green Red Yellow Green Red Yellow Green
Maximum Forward Current IFM 25mA 30mA 30mA 30mA 25mA 25mA 30mA 25mA
Typical Forward Current IF20mA 20mA 20mA 20mA 20mA 20mA 20mA 20mA
Forward Voltage VF2.8V 2.1V 2.0V 2.1V 2.25V 2.25V 2.1V 2.2V
Maximum Reverse Voltage VRM 4V 5V 5V 5V 5V 5V 5V 5V
Current Reduction Rate
Above 25°C ∆IF
0.33
mA/°C
0.40
mA/°C
0.40
mA/°C
0.40
mA/°C
0.33
mA/°C
0.33
mA/°C
0.40
mA/°C
0.33
mA/°C
Ambient Temperature Range
(when used with a bezel) –10° ~ +70°C –15° ~ +70°C –25° ~ +50°C
The electrical specifications shown are determined at a basic temperature of 25°C.
LED circuit is independent of switch operation. LED is colored in OFF state.
If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp.
The ballast resistor calculation and more lamp detail are shown in the Supplement section.
(+)
(-)
FE
C
FE
CC F
Series EB
Light Touch Miniature Pushbuttons
C37
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable Toggles
Rockers
Touch Tilt
www.nkkswitches.com
LEGENDS
Recommended Print Method:
Screen Print or Pad Print
Epoxy based ink is recommended.
Suggested Printable Area for Cap
AIR
FIL
TER
ON
Shaded areas are printable areas.
AT465
AT465
(11.5) Sq
.453
(9.98) Sq
.393
(0.76) Ty
p
.030
(11.5) Sq
.453
(9.98)
.393
(0.76) Typ
.030
(4.61) Ty
p
.181
(0.38)
Typ
.015
(0.76)
Typ
.030
NKK Switches can provide custom legends for caps. Contact factory for more information.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
NKK Switches:
EB2065P-CA EB2065PG-CA EB2011-CG EB2061-CB EB2011-BB EB2011-BB-RO EB2011-CF EB2065-BA
EB2065G-CA EB2011P-CB EB2011-BC EB2065P-BC EB2011-BE EB2011P-BE EB2011P-BF EB2011P-CG
EB2061P-CG EB2011P-RO EB2061-BA-RO EB2011-CA EB2011-BG-RO EB2065G-BB EB2011/U EB2061P-CA
EB2061G-BA EB2061-BE EB2061-BG EB2061-CG EB2061-BC EB2061G EB2061-CC EB2061P-CB EB2061P-
BC EB2061-CF EB2011P-CE EB2011G-BE EB2011G-BH EB2011G-BC EB2011P-CH EB2011G-CC EB2011PG
EB2011G-BF EB2011P-CF EB2085-BC EB2065-BH EB2065-CC EB2065G-BA EB2085-BG EB2065G EB2065P-
CC EB2085P-BC EB2085G EB2065P-CH EB2065-BE EB2065P-CF EB2065P-BB EB2065-BB EB2085-CC
EB2065-CB EB2085-BF EB2065-CF EB2065G-BE EB2065-CH EB2065-CE EB2065P-BA EB2085-CB EB2065-
BG EB2061-BF EB2011P-BG EB2011G-BA EB2061-BB EB2011-CC EB2011-BH EB2061P-BB EB2011G
EB2061G-BC EB2011-BG EB2011-CB EB2011-CH EB2011P-CA EB2061-CA EB2011-BA EB2011G-CA
EB2061P EB2011-BF EB2061 EB2011P-BA EB2011P-BC EB2011 EB2085-CA EB2085P-BB EB2085-BA
EB2085P-BA EB2065P EB2065-CA EB2065-BF EB2085 EB2065-BC EB2065 EB2085P
