347
Related Information
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
Conforming to
EMC Directive
Recognition
Excluding EX-33(-PN),
(
5 m cable length type
)
PNP output
type available
Simpler design
All you need to do is to make a ø4 mm
ø0.157 in hole where you would like
to stop or check the object (ø6 mm
ø0.236 in hole for reective type).
Furthermore, the center of the
sensing axis is the same as the
center of the mounting hole, which
makes it much easier to set the
sensing position.
Center of
sensing axis
Center of
mounting hole
New design solves all weak points of ber sensors
The EX-30 series solves all of the difculties associated
with ber sensors, such as:
• Difculty nding a suitable place for the amplier
• Fragility of the ber
• Extra space needed because of difculty in bending
the ber
• The nuisance of having to use a protective tube to
prevent ber breakage
Electric power saving
The EX-30 series achieves reductions in power
consumption of up to 65 %. These sensors contribute to
environmental friendliness.
BASIC PERFORMANCE
Long sensing range
The EX-30 series achieves long distance sensing
[thru-beam type: 500 mm 19.685 in (EX-33(-PN):
800 mm 31.496 in), reective type: 50 mm 1.969 in.]
50 mm 1.969 in
500 mm 19.685 in
Diffuse reflective type Thru-beam type
EX-33(-PN):
800 mm 31.496 in
High response speed of 0.5 ms
The same high response speed of 0.5 ms as ber sensor
ampliers is provided, making these sensors ideal for
sensing small objects, counting objects that are moving
quickly and positioning items such as circuit boards.
Globally usable
It conforms to the EMC Directive and obtains the UL
Recognition. (excluding 5 m 16.405 ft cable length type)
Moreover, PNP output type which is much in demand in
Europe, is also available.
Threaded Miniature Photoelectric Sensor Amplier Built-in
EX-30 SERIES Ver.2
The next-generation new form series
A new alternative to ber sensors
■Glossary of terms........................ P.1359~ ■General precautions ..................... P.1405
■General terms and conditions ........... F-17
■Sensor selection guide
.................. P.283~
panasonic-electric-works.net/sunx
A maximum 35 % reduction
compared to conventional sensors
*Effective from production in April 2011.
Ver.2
Threaded Miniature Photoelectric Sensor EX-30 SERIES Ver.2
348
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
1
Operation mode switch
New thru-beam types now feature operation mode switch and sensitivity adjuster!
EX-33(-PN)
2
Sensitivity adjuster
3
Bright 2-color indicator
Switching between light-ON and
dark-ON operating modes is
possible with a single model.
Operation mode switch
Receiver
It is convenient when you need
ne adjustment.
Sensitivity adjuster
Emitter
A bright 2-color indicator has
been incorporated in all types.
Stability indicator
(Green)
Operation indicator
(Orange)
Receiver
800 mm
31.496 in
EX-33(-PN)
MOUNTING / SIZE
Can be installed in the same way as standard bers
The EX-30 series can be screwmounted (M4 for thru-
beam type, M6 for reective type) in the same way as
standard ber sensors. This means that they can be
inserted into production lines in exactly the same way as
conventional high-priced ber sensors.
M4
Thru-beam type
(Reflective type: M6)
Takes up very little space
Unlike conventional bers, bending radius is not a
problem, so that the sensor can be securely installed
alongside conveyors.
EX-30 Fiber
Single-point tightening cuts down on installation work by half
Conventional photoelectric sensors required four (for
thru-beam type) or two (for reective type) mounting
holes and screws to be used. However, the EX-30 series
is installed with a single screw, thus cutting down on
installation work by half.
Conventional model EX-30
APPLICATIONS
Detecting IC height Detecting quantity of labels in
label magazine
Checking IC pins (using slit masks)
VARIETIES
349
Threaded Miniature Photoelectric Sensor EX-30 SERIES Ver.2
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
Type Appearance Sensing range Model No.
(Note) Output Output
operation
Thru-beam
500 mm
19.685 in
EX-31A NPN open-collector
transistor
Light-ON
EX-31B Dark-ON
EX-31A-PN PNP open-collector
transistor
Light-ON
EX-31B-PN Dark-ON
With operation
mode switch
800 mm
31.496 in
EX-33 NPN open-collector
transistor Switchable
either Light-ON or
Dark-ON
EX-33-PN PNP open-collector
transistor
Diffuse reective
50 mm
1.969 in
EX-32A NPN open-collector
transistor
Light-ON
EX-32B
Dark-ON
EX-32A-PN PNP open-collector
transistor
Light-ON
EX-32B-PN
Dark-ON
Incorporated an inverter countermeasure circuit
The EX-30 series become
signicantly stronger against inverter
light and other extraneous light.
ENVIRONMENTAL RESISTANCE
No protective tube needed
The EX-30 series has high
bending strength, so that
the protective tube used to
protect conventional ber
from breakage is not needed.
This also adds up to excellent
cost performance.
No protective tube
needed
FUNCTIONS
Bright 2-color indicator
A bright 2-color indicator
is incorporated in all
types.
Operation indicator
(Orange)
Stability indicator
(Green)
OPERABILITY
Incorporates a sensitivity adjuster (Excluding EX-31□)
The sensor incorporates
a sensitivity adjuster. It is
convenient when you need
ne adjustment.
Sensitivity
adjuster
Waterproof IP67 (IEC)
The sensor can be hosed
down because of its IP67
construction.
Note: However, take care that if it
is exposed to water splashes
during operation, it may detect
a water drop itself.
Note: The model No. with “P” shown on the label afxed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.
(e.g.) Emitter of EX-31A: EX-31P, Receiver of EX-31A: EX-31AD
5 m 16.404 ft cable length type(standard: 2 m 6.562 ft) is also available for NPN output type [excluding EX-33(-PN)].
When ordering this type, sufx “-C5” to the model No.
(e.g.) 5 m 16.404 ft cable length type of EX-31A is “EX-31A-C5”.
5 m 16.404 ft cable length type
ORDER GUIDE
*Effective from production in April 2011.
Fluoressent
light tube
Threaded Miniature Photoelectric Sensor EX-30 SERIES Ver.2
350
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
OPTIONS
Designation Model No. Description
Slit mask
For thru-beam
type sensor only
OS-EX30-1
Slit size ø1 mm
ø0.039 in
Slit on one side
• Sensing range: 200 mm 7.874 in [ EX-31□(-PN)]
320 mm 12.598 in [ EX-33(-PN)]
• Min. sensing object: ø2 mm ø0.079 in
Slit on both sides
• Sensing range: 150 mm 5.906 in [ EX-31□(-PN)]
240 mm 9.449 in [ EX-33(-PN)]
• Min. sensing object: ø1 mm ø0.039 in
Slit mask
Note: One slit and two spacers are provided per set. Two sets are required when installing on both sides.
• OS-EX30-1
SPECIFICATIONS
Type Thru-beam Diffuse reective
With operation mode switch
Model No.
NPN output EX-31A EX-31B EX-33 EX-32A EX-32B
Item PNP output EX-31A-PN EX-31B-PN EX-33-PN EX-32A-PN EX-32B-PN
Sensing range 500 mm 19.685 in 800 mm 31.496 in 50 mm 1.969 in (Note 2)
Sensing object
ø2 mm ø0.079 in or more opaque object (Completely beam interrupted objects)
Opaque, translucent or transparent object (Note 3)
Hysteresis
–
15 % or less of operation distance (Note 2)
Repeatability
(perpendicular to sensing axis) 0.05 mm 0.002 in or less 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less 13 mA or less
Output
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
Utilization category DC-12 or DC-13
Output operation Light-ON Dark-ON
Switchable either
Light-ON or Dark-ON
Light-ON Dark-ON
Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Stability indicator
Green LED
lights up under stable light received condition or
stable dark condition, incorporated on the receiver
Green LED
lights up under stable light received condition or
stable dark condition
Sensitivity adjuster
–
Continuously variable adjuster
Environmental resistance
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +70 °C –22 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (modulated)
Material Enclosure: Die-cast zinc (Nickel plated), Lens: Polycarbonate [EX-32□(-PN): Acrylic], Enclosure cover: Polycarbonate
Cable 0.1 mm2 3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Weight Net weight (each emitter and receiver): 20 g approx.
Gross weight: 65 g approx. Net weight: 20 g approx., Gross weight: 45 g approx.
Accessories Nut: 2 pcs., Toothed lock washer: 2 pcs. Nut: 1 pc., Toothed lock washer: 1 pc.
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The sensing range and the hysteresis are specied for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.
3) Make sure to conrm detection with an actual sensor before use.
Apply the optional slit mask when detecting small
objects or for increasing the accuracy of sensing
position.
However, the sensing range is reduced when the
slit mask is mounted.
351
Threaded Miniature Photoelectric Sensor EX-30 SERIES Ver.2
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
I/O CIRCUIT AND WIRING DIAGRAMS
NPN output type
I/O circuit diagram Wiring diagram
Note: The emitter of the thru-beam type sensor does not incorporate the
black wire.
Note: The emitter of the thru-beam type sensor does not incorporate the output.
Symbols … D1 : Reverse supply polarity protection diode
D2 : Reverse output polarity protection diode
ZD : Surge absorption zener diode
Tr : NPN output transistor
Symbols … D1 : Reverse supply polarity protection diode
D2 : Reverse output polarity protection diode
ZD : Surge absorption zener diode
Tr : PNP output transistor
Users’ circuit Internal circuit
D1
D2
Z D
Tr
(Brown) +V
(Black) Output (Note)
(Blue) 0 V
Color code
50 mA max.
Load
Sensor circuit
+
–
12 to 24 V DC
± 10 %
Load
Brown
Black (Note)
Blue
Color code
+
–
12 to 24 V DC
± 10 %
PNP output type
I/O circuit diagram Wiring diagram
Note: The emitter of the thru-beam type sensor does not incorporate the
black wire.
Note: The emitter of the thru-beam type sensor does not incorporate the output.
Users’ circuit Internal circuit
D1
D2
Z D
Tr
(Brown) +V
(Black) Output (Note)
(Blue) 0 V
Color code
50 mA max.
Load
Sensor circuit
+
–
12 to 24 V DC
± 10 %
Load
Brown
Black (Note)
Blue
+
–
12 to 24 V DC
± 10 %
EX-32□ EX-32□-PN Diffuse reective type
Sensing eld
Correlation between sensing object size and sensing range
Correlation between setting distance and excess gain
0 05
0.197
5
0.197
10
0.394
10
0.394
20
0.787
40
1.575
60
2.362
80
3.150
ℓL
Sensor
100 × 100 mm
3.937 × 3.937 in
White non-glossy paper
Left Right
Center
Operating point ℓ (mm in)
Setting distance L (mm in)
100
3.937
150
5.906
50
1.969
200
7.874
0
a × a mm a × a in
White non-glossy paper
L
Sensor
White non-glossy paper
side length a (mm in)
20
0.787
40
1.575
60
2.362
80
3.150
Sensing range L (mm in)
As the sensing object size becomes smaller than
the standard size (white non-glossy paper
100 × 100 mm 3.937 × 3.937 in), the sensing range
shortens, as shown in this graph.
SENSING CHARACTERISTICS (TYPICAL)
EX-31□ EX-31□-PN Thru-beam type
Parallel deviation Angular deviation
Parallel deviation with slit mask on one side
Parallel deviation with slit masks on both sides
0 050
1.969
50
1.969
100
3.937
100
3.937
ℓ
Emitter
Receiver
L
Operating point ℓ (mm in)
CenterLeft Right
Setting distance L (mm in)
200
7.874
400
15.748
600
23.622
800
31.496
L
Setting distance L (mm in)
Emitter
θ
Receiver
20020
Left Center Right
Operating angle θ ( ° )
4040
0
200
7.874
400
15.748
600
23.622
800
31.496
200
7.874
100
3.937
40
1.575
20
0.787
20
0.787
40
1.575
CenterLeft Right
0 0
Emitter
Receiver
L
ℓ
Operating point ℓ (mm in)
Setting distance L (mm in)
Setting distance L (mm in)
100
3.937
200
7.874
Emitter
Receiver
L
ℓ
40
1.575
20
0.787
020
0.787
40
1.575
Center RightLeft
Operating point ℓ (mm in)
0
EX-31□ EX-31□-PN
Thru-beam type
2,000
78.740
0 400
15.748
1,200
47.244
1,600
62.992
1
10
5
100
800
31.496
Excess gain
50
Setting distance L (mm in)
050
1.969
150
5.906
200
7.874
250
9.843
1
10
5
100
100
3.937
Excess gain
50
Setting distance L (mm in)
Correlation between setting distance and excess gain
Threaded Miniature Photoelectric Sensor EX-30 SERIES Ver.2
352
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
Material: Brass(Nickel plated)
(5.3)
(0.209)
ø1 ø0.039
Internal thread part
M4 × 0.7 0.028,
3.8 0.150 deep
(8.02)
(0.316)
7
(0.276)
SENSING CHARACTERISTICS (TYPICAL)
PRECAUTIONS FOR PROPER USE Refer to General precautions.
EX-33 EX-33-PN Thru-beam type
Parallel deviation
100
3.937
50
1.969
050
1.969
100
3.937
500
19.685
1,000
39.370
0
ℓ
Emitter
Receiver
L
Operating point ℓ (mm in)
CenterLeft Right
Setting distance L (mm in)
Angular deviation
40
1.575
20
0.787
0 20
0.787
40
1.575
500
19.685
1,000
39.370
0
Operating angle θ ( ° )
CenterLeft Right
Setting distance L (mm in)
L
Emitter
Receiver
θ
Parallel deviation with slit mask on one side
Operating point ℓ (mm in)
CenterLeft Right
Setting distance L (mm in)
40
1.575
20
0.787
020
0.787
40
1.575
100
3.937
300
11.811
200
7.874
400
15.748
0
ℓ
Emitter
Receiver
L
Parallel deviation with slit masks on both sides
ℓ
Emitter
Receiver
L
40
1.575
20
0.787
020
0.787
40
1.575
200
7.874
300
11.811
400
15.748
0
100
3.937
Operating point ℓ (mm in)
CenterLeft Right
Setting distance L (mm in)
• Never use this product as a sensing device for personnel protection.
• In case of using sensing devices for personnel protection,
use products which meet laws and standards, such as
OSHA, ANSI or IEC etc., for personnel protection applicable
in each region or country.
• Do not use during the initial transient time (50 ms)
after the power supply is switched on.
• In case of using the sensor at a place where
static electricity is generated, use a metal
mounting plate. Also, ensure to ground the
mounting plate.
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from our website
Sensor
EX-31□ EX-31□-PN
Note: Not incorporated on the emitter.
Sensor
EX-33 EX-33-PN
Notes: 1) Not incorporated on the emitter.
2) It is the sensitivity adjuster on the emitter.
7
0.276
3.8
0.150
5.1
0.201
7
0.276
M4 × 0.7
0.028
Stability indicator
(Green) (Note)
Opposing faces 7 0.276,
thickness 2.4 0.094
Toothed lock washer
ø8.5 ø0.035 Operation indicator
(Orange) (Note)
3
0.118
14
0.551
3.1
0.122
15.6
0.614
14
0.551
Beam axis
0.3
0.012
ø2.5 ø0.098 cable, 2 m 6.562 ft
long
8.2
0.323
11
0.433
7
0.276
3.8
0.150
5.1
0.201
7
0.276
M4 × 0.7
0.028
Stability indicator
(Green) (Note 1)
Operation indicator
(Orange) (Note 1)
3
0.118
14
0.551
3.1
0.122
15.6
0.614
14
0.551
Beam axis
0.3
0.012
ø2.5 ø0.098 cable, 2 m 6.562 ft
long
0.75
0.030
ø7.2
ø0.283
Operation mode
switch (Note 2)
Opposing faces 7 0.276,
thickness 2.4 0.094
Toothed lock washer
ø8.5 ø0.035
Sensor
EX-32□ EX-32□-PN
7
0.276
3.8
0.150
5.1
0.201
7
0.276
M4 × 0.75
0.030
Stability indicator
(Green)
Operation indicator
(Orange)
3 0.118
14
0.551
5.1
0.201
15.6
0.614
14
0.551
0.3
0.012
ø2.5 ø0.098 cable, 2 m 6.562 ft
long
Beam-
emitting
part
Beam-
receiving part
0.75
0.030
ø7.2
ø0.283
Sensitivity
adjuster
8.2
11
Opposing faces 10 0.394,
thickness 2 0.079
Toothed lock washer ø11 ø0.433
OS-EX30-1 Slit mask (optional)
Slit mask
Spacer
Material: POM
1
0.039
ø8
ø0.315
ø4.3
ø0.169