KBPC800 – KBPC810 1 of 2 © 2000 Won-Top Electronics
KBPC800 – KBPC8 10
8.0A BRIDGE RECTIFIER
Features
! Diffused Junction
! High Current Capability
! High Case Dielectric Strength H
! High Surge Current Capability J
! Ideal for Printed Circuit Board Application G + ~
! Plastic Material has Underwriters Laboratory
Flammability Classification 94V-O E A
! UL Recognized File # E157705 ~ -
E
Mechanical Data
! Case: Molded Plastic D C
! Terminals: Plated Leads Solderable per
MIL-STD- 202, Met hod 208
! Polarity: Marked on Body B
! Weight: 5.4 grams (approx.) A
! Mounting Position: Through Hole for #6 Screw
! Mounting Torque: 5.0 Inch-pounds Maximum
! Marking: Ty pe Number
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristic Symbol KBPC
800 KPBC
801 KBPC
802 KBPC
804 KBPC
806 KBPC
808 KBPC
810 Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current (Note 1) @TC = 50°C IO8.0 A
Non-Repetiti ve P eak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method) IFSM 125 A
Forward Voltage (per element) @IF = 4.0A VFM 1.1 V
Peak Reverse Current @T
C = 25°C
At Rated DC Blocking Voltage @TC = 100°C IR10
1.0 µA
mA
I2t Rating for Fusing (t<8.3ms) (Note 2) I2t64 A2s
Typical Junction Capacitance (Note 3) Cj100 pF
Typical Thermal Resistance (Note 4) RJC 9.4 K/W
Operating and Storage Temperat ure Range Tj, TSTG -65 to +125 °C
Note: 1. Mounted on metal chassis.
2. Non-repetit i ve, f or t > 1ms and < 8.3ms.
3. Measured at 1.0 MHz and applied reverse volt age of 4.0V D.C.
4. Thermal resistanc e juncti on to case per element.
WTE
POWER SEMICONDUCTORS
KBPC-8
Dim Min Max
A18.54 19.56
B6.35 7.60
C19.00 —
D1.27 Ø Typical
E5.33 7.37
Hole for #6 screw
G3.60 4.00
H12.20 13.20
J2.38 x 45°C Typic al
All Dimensions in mm
0.01
0.1
1.0
10
0 0.4 0.8 1.2 1.6
I , FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics, per element
F
T = 25°C
j
Pulse width = 300µs
01.0 10 100
I , PEAK FORWARD SURGE CURRENT (A)
F
NUMBER OF CYCLES AT 60Hz
Fig.3Max Non-Repetitive Peak Fwd Surge Current
Single half sine-wave
JEDEC method
T = 50°C
C
25
50
75
100
125
150
0.01
0.1
1.0
10
04080120
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics, per element
T = 25°C
j
T = 100°C
j
0
2
4
6
8
25 50 75 100 125
I , AVERAGE FORWARD OUTPUT CURRENT (A)
AV
T , CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
C
Mounted on
Metal chassis
Mounted on
PC Board
Resistive or
Inductive load
KBPC800 – KBPC810 2 of 2 © 2000 Won-Top Electronics
