Space Saver FAST TTL Gated Square Wave Generator The Space Saver FAST TTL Gated Square Wave Generators manufactured by Engineered Components Company are designed to provide a square wave output at a given frequency. These generators are both keyable and synchronizable, producing a continuous output train as long as a TTL "low" is applied to the input. With a TTL "high" applied to the input, output 1 will produce a constant "high" and output 2 will produce a constant "low". When the input switches to "low", output 2 goes "high" immediately. Output 1 and output 2 both go low after one half-cycle and then run in phase as a continuous square wave output. When the input switches back to "high", output 2 goes "low" immediately and output 1 goes "high" one half-cycle later. The MTBF on these modules, when calculated per MIL-HDBK-217, for a 50 deg.C ground fixed environment and with 50VDC applied, is in excess of 3 million hours. The temperature coefficient of delay is less than 500 ppm/deg.C over the operating temperature range of 0 to +70 deg. C. The module is provided in a 8-pin Space Saver package, fully encapsulated in epoxy resin and is housed in a Diallyl Phthalate case, blue in color. The case marking is applied by silkscreen using white epoxy paint. The 5 copper leads are tin-lead plated and meet the solderability requirements of MIL-STD-202, Method 208. MECHANICAL DIAGRAM Thru-Hole (F Suffix) .484 TYP. .020 DIA. TYP. .100 TYP. .290 .030 MADE IN USA YYWW .350 V O2 IN SSFGSWGTTL-50F Top view .375 C O1 .150 TYP. .100 TYP. .325 .030 DATE CODE DATE CODE V O2 .020 TYP. .010 TYP. .010 TYP. .150 TYP. MADE IN USA .100 TYP. .030 .020 TYP. .150 TYP. YYWW .060 TYP. +/-.020 .130 .400 TYP. YYWW .125 TYP. MADE IN USA .250 J-Lead (J Suffix) Gull-Wing (G Suffix) .500 DATE CODE V O2 IN SSFGSWGTTL-50G IN SSFGSWGTTL-50J .375 Top view C O1 .325 C O1 .500 .500 Product Selection Table (Add F Suffix for Thru-Hole Leads, G Suffix for Gull-Wing Leads, or J Suffix for J-Leads) Output Frequency Part Nominal Number Output Frequency Tolerance SSFGSWG-TTL-2 2.0 MHz +/-2% 2.5 MHz +/-2% SSFGSWG-TTL-2.5 SSFGSWG-TTL-3 3.0 MHz +/-2% SSFGSWG-TTL-3.5 3.5 MHz +/-2% SSFGSWG-TTL-4 4.0 MHz +/-2% SSFGSWG-TTL-4.5 4.5 MHz +/-2% SSFGSWG-TTL-5 5.0 MHz +/-2% SSFGSWG-TTL-5.5 5.5 MHz +/-2% SSFGSWG-TTL-6 6.0 MHz +/-2% SSFGSWG-TTL-7 7.0 MHz +/-2% SSFGSWG-TTL-8 8.0 MHz +/-2% SSFGSWG-TTL-9 9.0 MHz +/-2% SSFGSWG-TTL-10 10.0 MHz +/-2% SSFGSWG-TTL-11 11.0 MHz +/-2% SSFGSWG-TTL-12 12.0 MHz +/-2% SSFGSWG-TTL-13 13.0 MHz +/-2% SSFGSWG-TTL-14 14.0 MHz +/-2% SSFGSWG-TTL-15 15.0 MHz +/-2% SSFGSWG-TTL-20 20.0 MHz +/-2% SSFGSWG-TTL-25 25.0 MHz +/-2% SSFGSWG-TTL-30 30.0 MHz +/-2% SSFGSWG-TTL-35 35.0 MHz +/-2% SSFGSWG-TTL-40 40.0 MHz +/-2% SSFGSWG-TTL-45 45.0 MHz +/-2% SSFGSWG-TTL-50 50.0 MHz +/-2% SSFGSWG-TTL-60 60.0 MHz +/-2% SSFGSWG-TTL-70 70.0 MHz +/-2% SSFGSWG-TTL-80 80.0 MHz +/-2% SSFGSWG-TTL-90 90.0 MHz +/-2% SSFGSWG-TTL-100 100.0 MHz +/-2% Special modules can often be manufactured to provide for customer specific applications. Operating Specifications: All measurements made at 25 deg. C All measurements made with Vcc = +5VDC All measurements made with (1) FAST TTL output load Operating Temperature: 0 to +70 deg. C Storage Temperature: -55 to +125 deg. C Vcc Supply Voltage: 4.75 to 5.25VDC Vcc Supply Current: SSFGSWG-TTL-2X = 20mA typical SSFGSWG-TTL-100X = 30mA typical Logic "High" Input: Voltage: 2.0VDC min. ; Vcc max. Current: 2.7VDC = 20uA max. ; 5.5VDC = 1mA max. Logic "Low" Input: Voltage: 0.8 VDC max. Current: -0.6mA max. Logic "High" Voltage Out: 2.7VDC min. Logic "Low" Voltage Out: 0.5VDC max. BLOCK DIAGRAM V 8 IN 5 Square Wave Generator engineered components company A Division of Cornucopia Tool & Plastics, Inc. PO Box 1915, 448 Sherwood Rd., Paso Robles CA 93447 4 1 7 OUT 1 OUT 2 C Phone: 805-369-0034 Fax: 805-369-0033 Web: www.ec2.com