3MTM Wiremount Socket .100" x .100" for .050" Pitch Cable (Optional Plastic or Metal Strain Relief) 3000 Series * Industry standard IDC socket * Positive locking metal "J" clips provide high cover retention * Mates with 3M headers, plugs and pin strips for quick connect/ disconnect capability * Open or closed end covers available * Accepts flat cable or discrete wire * Military polarization, with or without centerbump * Transfer adhesive on covers provides precision alignment between connector and cables resulting in high yield terminations * Availability of pull tab to facilitate proper unplugging * Availability of 2 types of strain relief (standard and low profile) to isolate the IDC interface * Set the standard for MIL spec and IEC standardization * Availability of Military and Center Bump polarization * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: October 12, 2011 TS-0718-F Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Gray Contact: Material: Copper Alloy J Clip Material: Stainless Steel Plating: Underplating and U-Slot: 100 " [ 2.54 m ] Nickel Wiping Area: 30 " [ 0.76 m ] Gold Wire Accommodation: 26 and 28 AWG Solid and Stranded Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 1 Line 6 Adjacent Lines All Lines 26 AWG 4.75 2.00 1.00 28 AWG 4.50 1.75 1.00 Rating Conditions: EIA-364-070 Method 2, 30C maximum temperature rise, 20% derated. Reference appropriate 3M Product Specification for detailed current derating curves. Insulation Resistance: > 1 x 109 at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Wiremount Socket .100" x .100" for .050" Pitch Cable (Optional Plastic or Metal Strain Relief) Inch (mm) C Contact Quantity Tolerance Unless Noted .0 Inch .000 .01 .005 [ ] Dimensions for Reference only A .24 [ 6.1 ] .1 .00 NO.3XXX Recessed for Cable Exit B Optional Closed End Cover .050 Typ* [ 1.27 ] Nonconductive Transfer Adhesive with Liner .14 [ 3.6 ] See Note 2 See Note 1 .15 [ 3.8 ] .050 Ref [ 1.27 ] Socket Series Position 1 B 3863 0.48 [12.2] 0.34 [8.6] 3868 0.58 [14.7] 0.44 [11.2] 10 3473 0.68 [ 17.3 ] 0.54 [ 13.7 ] 14 3385 0.88 [ 22.4 ] 0.74 [ 18.8 ] 16 3452 0.98 [ 24.9 ] 0.84 [ 21.3 ] 20 3421 1.18 [ 30.0 ] 1.04 [ 26.4 ] 24 3626 1.38 [ 35.1 ] 1.24 [ 31.5 ] 26 3399 1.48 [ 37.6 ] 1.34 [ 34.0 ] 30 3419 1.68 [ 42.7 ] 1.54 [ 39.1 ] 34 3414 1.88 [ 47.8 ] 1.74 [ 44.2 ] 36 9436 1.98 [ 50.3 ] 1.84 [ 46.7 ] 40 3417 2.18 [ 55.4 ] 2.04 [ 51.8 ] 44 9444 2.38 [ 60.5 ] 2.24 [ 56.9 ] 50 3425 2.68 [ 68.1 ] 2.54 [ 64.5 ] 60 3334 3.18 [ 80.8 ] 3.04 [ 77.2 ] .54 Ref [ 13.7 ] Assembled Height with Metal Profile Strain Relief .06 [ 1.5 ] Centerbump (Optional) .14 .035 [ 3.6 ] [ 0.89 ] .100 Typ [ 2.54 ] Position 2 A A 8 Military: Dual Polarization Slots .24 [ 6.1 ] Dimensions 6 .26 [ 6.6 ] Triangle Indicates Position 1 3000 Series .41 Ref [ 10.4 ] .100 [ 2.54 ] Assembled Height without Strain Relief Notes: 1. This polarizing groove is non-existent on 3863, 3868, 3385 and 3473 Series. 2. This polarizing groove is non-existent on 3863 series for Polarization option 6. 3. The low profile strain relief can be used with the 4600 Series Plug and .1 x .1 Headers with ejector latches. The latches will only function as an ejector. .565 Ref [ 14.35 ] .64 Ref [ 16.3 ] Assembled Height with Plastic Strain Relief Ordering Information Sockets XXXX-XXXX Socket Series: See Table for 3M Part Number Cover: 6 = Open End (For Daisy Chaining or Bussing) 7 = Closed End (For End Cable Termination) (10-60 Position Only) 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com RIA (E1 & C1 Apply) 00 = No Strain Relief XX = Contact Quantity for Plastic Strain Relief 10-60 Position 05= Plastic Strain Relief 6 & 8 Position 06 = Metal Strain Relief 10-60 Position Polarization: 0 = Military (Dual Slot) 6 = Centerbump and Military Strain Relief (Order Separately) 3448-X0XX Type: 2 = Low Profile 10-60 Position (Metal) 3 = Plastic Keying Plug (Order Separately) 3435-0 XX = ``Contact Quantity'' See Table (i.e. 50 for a 50 Position Strain Relief) See TS-0720 Pull Tabs (Order Separately) 3490-X Assembly tools: 3MTM Press (or equivalent) 3640 , 3MTM Locator Plate 3443-94, 3MTM Platen 3442-9. TS-0718-F Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Wiremount Socket .100" x .100" for .050" Pitch Cable (Optional Plastic or Metal Strain Relief) 3000 Series -BTyp .100 [2.54] -ATyp .100 [2.54] Space Occupied by Socket .30 Min [7.6] Typ .20 Min [5.1] .30 Min [7.6] .14 [3.6] Space for Cable Exit .025 .001 [0.64] Square or Round Typ (See Note 1) .025 See Note 2 A B .018 Max [0.46] .230 Min [5.84] Recommended Post Pattern TS-0718-F Sheet 3 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.