948 FIBER MANAGEMENT SYSTEMS SERIES The Amphenol Fiber Management Systems product line is comprised of a complete series of wall and rack mounted enclosures that are designed to be used for the distribution and management of fiber optic cables. The product offering includes a variety of enclosures for patching, splicing, distribution, storing, splitting, and coupling of fiber optic signals for both single mode and multimode cables. Patch Panels Splice Panels Amphenol 948 Series Patch Panels provide a convenient point for patching and storing fiber optic cables. A full range of products are available for termination of backbone cables and horizontal cables at cross-connects and for interconnection between fiber optic distribution cables and equipment jumper cables. Amphenol 948 Series Splice Panels are rack mounted panels which provide a convenient point for onrack storing and protecting of fiber optic splices. These panels are typically used at building entrances for transition splicing between the outdoor cables and indoor pigtails. They are typically used in conjunction with the 948 Series Patch Panel enclosures. Coupler Panels Amphenol 948 Series Rack Mount Coupler Panels incorporate fiber optic couplers (optical splitters and wavelength division multiplexers) at the fiber distribution frame. These panels are used in fiber optic networks to increase system capacity. Storage Panels Amphenol 948 Series Rack Mount Storage panels provide ample and organized slack storage of fiber optic cables. These panels reduce the concerns involved in maintaining and upgrading the network. Features Distribution Panels Amphenol 948 Series Rack and Wall Mount Distribution Panels combine all the features of a patch panel and a splice panel into one enclosure. They provide a protective area for patching, splicing and storing fiber optic cables. Distribution panels are typically used at building entrances, telecom closets, customer premise applications, or in equipment rooms for termination of interbuilding backbone cables. * Panels requiring adapters are preloaded with Amphenol's SC, ST or FC adapters to reduce labor costs during installation. * Panels can be pre-loaded with Amphenol pigtail cable assemblies to further reduce labor costs during field installation. * A single part number is used to specify semi-loaded or fully loaded enclosures to simplify the ordering process. * Rack mount panels have removable doors for increased access during installation and maintenance. * Panels provide ample room for storage of fiber slack, while maintaining bend radius protection for the stored fibers. * All enclosures include mounting hardware, installation instructions, laser warning labels, cable ties, and cable routing designation cards. Index Panels: Page No. Applications .......................... 2 Wall Mount Patch ............. 3-4 Wall Mount Distribution .... 5-6 Rack Mount Patch ............ 7-8 Rack Mount Splice ......... 9-10 Panels: Page No. Rack Mount Distribution ... 11-12 Rack Mount Coupler ............. 13 Coupler Modules ................... 14 Cable Routing Guides ........... 16 Panels: Page No. Cable Clamp .......................... 17 Splice Trays ............................ 18 Panel Accessories .................. 19 Frames and Accessories ... 20-21 APPLICATIONS The applications for Amphenol's Fiber Management System range from small fiber counts to very large fiber counts which include multiple rows of network bays. Our complete system can fulfill the many requirements found in headends, building entrances, equipment rooms, telecommunications closets and customer premise applications. All of our network bays can be fully equipped with panels and pre-terminated cables ready for installation. Full integration of our splitters and WDM technologies can further enhance your network. Wall Mount Enclosure Transmission Equipment Terminal Network Bays Patch Enclosures Patch Cords Patch Enclosure Transmission Equipment Patch Cords OSP Cable Amphenol's Fiber Management System can be utilized for both interconnect and cross-connect applications. Both configurations route the transmission from point A to point B, but they have some very distinct differences. INTERCONNECT Equipment Patch Cords CROSS-CONNECT Patch Enclosures Equipment Patch Cords OSP Cable OSP Cable INTERCONNECT configurations connect the OSP fibers directly to the equipment patch cords, via a patch enclosure. This configuration yields a lower installation cost, but does not provide maintenance and upgrade flexibility, especially in high fiber count applications. Patch Enclosure Patch Cord CROSS-CONNECT configurations connect the OSP fibers and equipment patch cords to the rear of the patch enclosure. Additional patch cords are then used (on the front of the patch enclosure) to connect each OSP fiber port to the equipment patch cord port. Although this configuration requires additional installation costs, it is by far the more popular configuration. The cross-connect architecture provides greater flexibility for maintenance and upgrades. 948 WALL MOUNT PATCH PANEL SERIES Description Amphenol's 948 Series Wall Mount Patch Panels provide an excellent enclosure for patching and storing fiber optic terminations. They are available in a variety of sizes to accommodate from 12 to 72 fibers. The Wall Mount Patch Panel is designed to be compact as well as provide ample fiber optic cable routing, organization, and storage. The panels come equipped with a cam lock in the installer side (large door) of the panel, allowing unrestricted access to the patching side. A second factory-installed cam lock is available to lock both areas of the panel. Wall Mount Patch Panels are used in backbone, intermediate and horizontal cross-connects, equipment rooms, building entrances, telecommunications closets, computer rooms and customer premise applications. Features * Multiple cable entrance ports with rubber grommets Products * 12, 24, 48, or 72 fiber capacity Wall Mount Patch Panels * Cam lock restricts access to main compartment (second lock optional) * Ample storage slack, maintaining a 1.5" minimum bend radius * Mounts on 16" centers (standard stud) * Removable doors provide increased enclosure access * Sturdy 16 gauge steel construction with a durable beige powder coat finish * SC, FC, or ST adapters pre-installed * Variety of pre-terminated cable assemblies available preinstalled (optional) * Single part number specifies panel size, adapters, and pigtails LATCH CAM LOCK CABLE TIE EMBOSSMENTS STRAIN RELIEF / GROUND LUG LOADED 6-PACKS EMBOSSED MOUNTING HOLES ENTRANCE CABLE GROMMET PRE-TERMINATED PIGTAILS CABLE ROUTING GUIDES Fiber Capacity LIFT-OFF HINGES 12 24 48 72 LATCH DESIGNATION LABEL (INSIDE DOOR) 948 - 1 P 1 Fiber Capacity Pigtails 1 2 4 6 0 1 2 3 4 5 6 = = = = 12 24 48 72 = = = = = = = - Cable Length Specify in meters (e.g. 05 = 5 meters) No Pigtails S/M Super Polish S/M Ultra Polish S/M Angle Polish M/M 50/125 Fiber M/M 62.5/125 Fiber M/M 100/140 Fiber Cable Type A B C D E F G H J K L Q T A C D E F G S/M SC (ceramic) S/M SC Duplex (ceramic) S/M FC Flange (ceramic) S/M FC D-Hole (ceramic) S/M FC D-Hole (angle ceramic) S/M ST metal body (ceramic) M/M SC (metal) M/M SC Duplex (metal) M/M FC Flange (metal) M/M FC D-Hole (metal) M/M ST metal body (metal) S/M SC (angle ceramic) S/M ST polymer body (ceramic) 15.2"W x 11.3"H x 3.2"D 18.5"W x 17.2"H x 3.2"D 18.5"W x 17.2"H x 6.2"D 18.5"W x 17.2"H x 6.2"D 0 Connector/Adaptor Style = = = = = = = = = = = = = Dimensions = = = = = = None 3 mm Jacketed Pigtail 12 Fiber (No Fiber Sub-Groups) 24 Fiber (6 Fiber Sub-Groups) 48 Fiber (12 Fiber Sub-Groups) 72 Fiber (12 Fiber Sub-Groups) 4 948 WALL MOUNT DISTRIBUTION PANEL SERIES Description Amphenol's 948 Series Wall Mount Distribution Panels provide an excellent enclosure for patching, splicing and storing fiber optic terminations. They are available in a variety of sizes to accommodate from 12 to 72 fibers. The Wall Mount Distribution Panel is designed to be compact as well as provide ample fiber optic cable routing, organization, and storage. The panels come equipped with a cam lock in the installer side (large door) of the panel, allowing unrestricted access to the patching side. A second factory-installed cam lock is available to lock both areas of the panel. Splice trays are also included with each enclosure. Wall Mount Distribution Panels are used in backbone intermediate and horizontal cross-connects, equipment rooms, building entrances, telecommunications closets, computer rooms and customer premise applications. Products * 12, 24, 48, or 72 fiber capacity Wall Mount Distribution Panels Features * Multiple cable entrance ports with rubber grommets * Cam lock restricts access to main compartment (second lock optional) * Ample storage slack, maintaining a 1.5" minimum bend radius * Mounts on 16" centers (standard stud) * Removable doors provide increased enclosure access * Sturdy 16 gauge steel construction with a durable beige powder coat finish * SC, FC, or ST adapters pre-installed * Splice trays with optional fusion, fusion with heat shrink or mechanical splice pads * Variety of pre-terminated cable assemblies available preinstalled (optional) * Single part number specifies panel size, adapters, splice trays and pigtails LATCH CAM LOCK CABLE TIE EMBOSSMENTS STRAIN RELIEF / GROUND LUG AMPHENOL SPLICE TRAY LOADED 6-PACKS EMBOSSED MOUNTING HOLES CABLE ENTRANCE GROMMET PRE-TERMINATED PIGTAILS CABLE ROUTING GUIDES LIFT-OFF HINGES LATCH DESIGNATION LABEL (INSIDE DOOR) 948 - 1 Fiber Capacity 1 = 12 2 = 24 4 = 48 6 = 72 Connector/Adapter Style A= B= C= D= E= F= G= H= J = K= L = Q= T= S/M SC (ceramic) S/M SC Duplex (ceramic) S/M FC Flange (ceramic) S/M FC D-Hole(ceramic) S/M FC D-Hole (angle ceramic) S/M ST metal body (ceramic) M/M SC (metal) M/M SC Duplex (metal) M/M FC Flange (metal) M/M FC D-Hole (metal) M/M ST metal body (metal) S/M SC (angle ceramic) S/M ST polymer body (ceramic) 1 D Fiber Capacity Dimensions 12 24 48 72 15.2"W x 11.3"H x 3.2"D 18.5"W x 17.2"H x 3.2"D 18.5"W x 17.2"H x 6.2"D 18.5"W x 17.2"H x 6.2"D Cable Length Splice Pad 1 = Fusion Splice 2 = Fusion Splice w/Heat Shrink 3 = Mechanical Specify in meters (eg. 05 = 5 meters) Pigtails 0 = No Pigtails 1 = S/M Super Polish 2 = S/M Ultra Polish 3 = S/M Angle Polish 4 = M/M 50/125 Fiber 5 = M/M 62.5/125 Fiber 6 = M/M 100/140 Fiber Cable Type A = None B = 900m Buffered Pigtail C = 3 mm Jacketed Pigtail D = 12 Fiber (No Fiber Sub-Group) K = 900m Jacketed Pigtail 6 948 RACK MOUNT PATCH PANEL SERIES Description Amphenol's 948 Series Rack Mount Patch Panels provide a convenient location for patching single mode or multimode fiber optic cables from the cable termination point to the lightwave equipment. They are available in a variety of sizes to accommodate from 24 to 96 fibers. The Rack Mount Patch Panels can be used in both cross-connect and interconnect applications. Preterminated multi-channel fiber optic pigtails are excellent for reducing installation costs and installer handling. The patch panel pigtail can be quickly and easily routed to the splicing location, eliminating the need for performing field terminations. Rack Mount Patch Panels are used in backbone intermediate and horizontal cross-connects, equipment rooms, building entrances, headends, central offices and computer rooms. Products * 24, 48, 72 or 96 fiber capacity Rack Mount Patch Panels Features * Smoked polycarbonate front door exposes designation card * Cable management organizers located in rear of the enclosure * Mounts on 19" or 23" racks (reversible brackets) * Removable doors provide increased enclosure access * Sturdy 16 gauge steel construction with a durable beige powder coat finish * Enhanced cable routing brackets available (optional) * SC, FC, or ST adapters pre-installed * Variety of pre-terminated cable assemblies available preinstalled (optional) * Single part number specifies panel size, adapters type, and pigtails CABLE TIE EMBOSSMENTS UNIVERSAL MOUNTING BRACKET Fiber Capacity Dimensions 24 48 72 96 17.3"W x 17.3"W x 17.3"W x 17.3"W x 5.3"H x11.9"D 6.8"H x11.9"D 6.8"H x11.9"D 10.8"H x11.9"D ACCESSORY MOUNTING HOLES REAR DOOR CABLE ENTRANCE PORT LOADED 6-PACKS BEND RADIUS PROTECTION CABLE DESIGNATION CARD POLYCARBONATE FRONT DOOR 948 - 1 2 P - 0 Fiber Capacity 2 = 24 4 = 48 6 = 72 7 = 96 Connector/Adapter Style A B C D E F G H J K L Q T = = = = = = = = = = = = = S/M SC (ceramic) S/M SC Duplex (ceramic) S/M FC Flange (ceramic) S/M FC D-Hole(ceramic) S/M FC D-Hole (angle ceramic) S/M ST metal body (ceramic) M/M SC (metal) M/M SC Duplex (metal) M/M FC Flange (metal) M/M FC D-Hole (metal) M/M ST metal body (metal) S/M SC (angle ceramic) S/M ST polymer body (ceramic) Cable Length Specify in meters (eg. 05 = 5 meters) Pigtails 0 = No Pigtails 1 = S/M Super Polish 2 = S/M Ultra Polish 3 = S/M Angle Polish 4 = M/M 50/125 Fiber 5 = M/M 62.5/125 Fiber 6 = M/M 100/140 Fiber Cable Type A C D E F G H = = = = = = = None 3 mm Jacketed Pigtail 12 Fiber (No Fiber Sub-Group) 24 Fiber (6 Fiber Sub-Groups) 48 Fiber (12 Fiber Sub-Groups) 72 Fiber (12 Fiber Sub-Groups) 96 Fiber (12 Fiber Sub-Groups) 8 948 RACK MOUNT SPLICE PANEL SERIES Description Amphenol's 948 Series Rack Mount Splice Panels provide an on-rack splicing point for the OSP cable. They are available in two or three drawer designs to accommodate up to 144 fibers. The Rack Mount Splice Panel incorporates splicing within the fiber optic network bays. These enclosures are ideal for splicing a pre-terminated patch panel pigtail to the OSP cable. The enclosures provide ample fiber storage within a removable drawer. Each drawer can accommodate up to two splice trays for a total of 48 fusion splices. Rack Mount Splice Panels are used in backbone intermediate and horizontal cross-connects, equipment rooms, building entrances, headends, central offices and computer rooms. Products * 48, 72, 96 or 144 fiber capacity Rack Mount Distribution Panels * Two or three drawer designs Features * Removable splice drawers with positive stop * Smoked polycarbonate front door exposes designation card * Two or three drawer designs to accommodate up to 144 fibers * Ample storage slack, maintaining a 1.5" minimum bend radius * Splice trays may be located in a variety of positions within the splice drawer * Mounts on 19" or 23" racks (reversible brackets) * Removable doors provide increased enclosure access * Sturdy 16 gauge steel construction with a durable beige powder coat finish * Splice trays with optional fusion, fusion with heat shrink, or mechanical splice pads * Single part number specifies panel size and splice trays CABLE TIE EMBOSSMENTS UNIVERSAL MOUNTING BRACKET DRAWER STOP POLYCARBONATE FRONT DOOR DRAWER STOP TAB ACCESSORY MOUNTING HOLES REAR DOOR CABLE ENTRANCE PORT VELCRO STRAPS LATCH CABLE ROUTING GUIDES CABLE DESIGNATION CARD AMPHENOL SPLICE TRAYS SPLICE DRAWER PART NUMBER SPLICE CAPACITY SPLICE TYPE DRAWERS DIMENSIONS 948-402SY-10A00 48 Fusion 2 17.3"W x 5.3"H x 11.9"D 948-402SY-20A00 48 Fusion with Heat Shrink 2 17.3"W x 5.3"H x 11.9"D 948-402SY-30A00 48 Mechanical 2 17.3"W x 5.3"H x 11.9"D 948-602SY-10A00 72 Fusion 2 17.3"W x 5.3"H x 11.9"D 948-602SY-20A00 72 Fusion with heat Shrink 2 17.3"W x 5.3"H x 11.9"D 948-602SY-30A00 72 Mechanical 3 17.3"W x 6.8"H x 11.9"D 948-702SY-10A00 96 Fusion 2 17.3"W x 5.3"H x 11.9"D 948-702SY-20A00 96 Fusion with Heat Shrink 2 17.3"W x 5.3"H x 11.9"D 948-802SY-10A00 144 Fusion 3 17.3"W x 6.8"H x 11.9"D 948-802SY-20A00 144 Fusion with Heat Shrink 3 17.3"W x 6.8"H x 11.9"D 10 948 RACK MOUNT COUPLER PANEL SERIES CABLE TIE EMBOSSMENTS Description BEND RADIUS PROTECTION REAR DOOR LATCH CABLE DESIGNATION CARD COUPLER MODULES Products CABLE ENTRANCE PORTS POLYCARBONATE FRONT DOOR * 8 or 12 position Rack Mount Coupler Panels Features * Smoked polycarbonate front door exposes designation card * Mounts on 19" or 23" racks (reversible brackets) * Removable doors provide increased enclosure access * Sturdy 16 gauge steel construction with a durable beige powder coat finish * Removable coupler modules (ordered separately) * Coupler module ports are placed on an angle for added bend relief protection * Coupler configuration and part number label located on coupler module * Variety of WDMs, power splitters, and tap couplers are available Coupler Panels Rack Mount Coupler Panels are used in network distribution signal monitoring, backbone intermediate and horizontal cross-connects, unidirectional / bi-directional links, equipment rooms, building entrances, headends, trunking applications, central offices, and computer rooms. UNIVERSAL MOUNTING BRACKETS The Rack Mount Coupler Panels are capable of housing a number of coupler modules with a variety of configurations. Coupler modules are available with power splitters, WDM's, DWDMs, and tap couplers. Each coupler module conveniently displays a diagramed configuration of the photonic product enclosed. ACCESSORY MOUNTING HOLES Amphenol's 948 Series Rack Mount Coupler Panels are designed to incorporate fiber optic coupler products within the same fiber management frame system. They are available with either 8 or 12 module positions. * Specify panel size and coupler module/configuration utilizing only two part numbers Part Number Description Dimensions 948-100-5105 948-100-5106 8 position coupler panel 12 position coupler panel 17.3"W x 5.3"H x 11.9"D 17.3"W x 6.8"H x 11.9"D COUPLER MODULES COUPLER DESIGNATION LABEL INPUT/OUTPUT PORTS (ADAPTERS OR PIGTAILS) REAR PORTS AVAILABLE POSITIONING RAIL ANGLED PORTS 8.50 6.20 Amphenol's Coupler Modules 1.00 provide an excellent package for protecting and managing any variety of splitters or WDM's. Each module is conveniently stored in Amphenol's coupler panel and integrated directly within the network bays for optimal flexibility and maintenance accessibility. All photonic products are made by using fused biconic taper manufacturing practices and Amphenol's high quality standards. PUSH/PULL FASTNERS Splitters WDMs Types: Single Window Broadband 1310nm Types: Unidirectional Mux 1310Tx/1550Tx Single Window Broadband 1550nm Unidirectional Demux 1310Rx/1550Rx Wideband 1310/1550nm Bi-directional 1310Rx/1550Tx Tap Coupler 1310nm or 1550nm Bi-directional 1310Tx/1550Rx Optical Splitters Add/Drop 1310/1550nm Configurations: 1x2, 2x2, 1x3, 1x4 and 1xN . . . Narrowband 1533/1557nm Coupling Ratios: 50/50, 10/90, 33/67, 33/33/33, 25/25/25/25 (additional coupling ratios available) DWDM 4, 8, 12 & 16 channels Available with adapter ports or pigtails in SC, FC & ST Available with adapter ports or pigtails in SC, FC & ST Thermal stability < 0.2dB variation in insertion loss Thermal stability <0.2dB variation in insertion loss (DWDM < 0.5dB) Storage temperature: -40 to +85C Storage temperature: -40 to +85C Directivity: < -55dB Operating Temperature (DWDM) 0 to 70C Fiber: Corning SMF -28 Fiber: Corning SMF -28 Note: See coupler data sheets for further specifications and information. 14 CABLE ROUTING GUIDES Description Complete cable routing guide kits are composed of both Enhanced Cable Brackets and Vertical Cable Guides. The Enhanced Cable Brackets are designed to provide better cable management entering and exiting enclosures. They allow fiber distribution frames to increase in fiber capacity by providing the ability to add or remove patch cords without disturbing neighboring fibers. The Vertical Cable Guides manage cables routed vertically alongside the enclosures. Vertical Cable Guides * Provides an orderly channel for routing fiber optic cables vertically along the enclosures. * Versions available for 19" or 23" frames. CABLE ROUTING KIT * Unique design allows panels to be added or removed without removing guides. Enhanced Cable Brackets * Improved bend radius protection allows fiber optic cables to make a horizontal to vertical transition. ENHANCED CABLE BRACKETS * Routing fingers provide excellent fiber organization by reducing the number of fibers being grouped. * Mounts directly to enclosure allowing greater flexibility Products Part Number Description Where Used 948-100-5225 Vertical Cable Guides, 19" On 19" frames for all rack mount panels 948-100-5220 Vertical Cable Guides, 23" On 23" frames for all rack mount panels 948-100-5221 6" Enhanced Cable Guides 48 & 72 port rack mount panels 948-100-5222 9" Enhanced Cable Guides 96 port rack mount panels 948-100-5226* 6" Cable Routing Kit, 19" 19" frames and 48 & 72 port panels 948-100-5227* 9" Cable Routing Kit, 19" 19" frames and 96 port panels 948-100-5223* 6" Cable Routing Kit, 23" 23" frames and 48 & 72 port panels 948-100-5224* 9" Cable Routing Kit, 23" 23" frames and 96 port panels * Cable Routing Kits include Verticle Cable Guides and Enhanced Cable Guides 16 948 CABLE CLAMP SERIES Description Amphenol's Cable Clamp provides a unique method for securing fiber optic cables. Each cable clamp includes a multi-diameter module that perfectly fits any size cable in its range. The multi-diameter modules easily adapt to fit fiber optic cables simply by removing a few layers from its center core. This unique method of securing the cable provides excellent protection and axial clamping. Features * Unique multi-diameter module gently grips cable without potential for damage * Accommodates a wide range of cable sizes * Removable layers allows a perfect fit to be easily made with the cable * Three different sizes available to fit cables from 4 to 32 mm * Configurations available for clamping multiple cables within a single clamp * Versions available for panel or frame mounting * Reduces radii required for entering enclosures Products Part Number Description Where Used 948-100-5210 Cable Clamp 4-13.5mm Panel Mount 948-100-5211 Cable Clamp 12-22mm Panel Mount 948-100-5212 Cable Clamp 22-32mm Panel Mount 948-100-5213 Cable Clamp 4-13.5mm Frame Mount 948-100-5214 Cable Clamp 12-22mm Frame Mount 948-100-5215 Cable Clamp 22-32mm Frame Mount SPLICE TRAYS FIBER GUIDES Description CABLE TIE MOUNTING HOLES SPLICE TRAY CABLE ENTRANCE SPLICE HOLDER Each 300mm tray can accommodate up to 24 fusion splices or 12 mechanical splices. Each 200mm tray can accommodate up to 12 fusion or mechanical splices. Splice trays are included with Amphenol Splice and Distribution Panels. (Shown with fusion splice with heat shrink holder) Amphenol's 948 Series Splice Trays provide an organized means of storing and protecting completed fiber optic splices. Bend radius protection and foldover arms prevent fibers from being damaged during handling. Features * Unique fold-over arms provide added protection LOCATOR HOLE FOR SNAP-ON LID FIBER PROTECTION ARM STAND-OFF TO PREVENT CABLE DAMAGE * Bend radius protection for stored fibers * Easily stackable * Store up to 0.5 meters of each buffered fiber Products Part Number Description Where Used 948-2362 200mm Tray for 12 Fusion Splices 7.8"L x 4.8"W x 1.0"H 948-2363 200mm Tray for 12 Fusion w/Heat Shrink Splices 7.8"L x 4.8"W x 1.0"H 948-2364 200mm Tray for 12 Mechanical Splices 7.8"L x 4.8"W x 1.0"H 948-2366 300mm Tray for 24 Fusion Splices 11.8"L x 4.8"W x 1.0"H 948-2367 300mm Tray for 24 Fusion w/Heat Shrink Splices 11.8"L x 4.8"W x 1.0"H 948-2368 300mm Tray for 12 Mechanical Splices 11.8"L x 4.8"W x 1.0"H * 300mm or 200mm designs available 18 948 PANEL ACCESSORIES SERIES Six Pack Coupler Modules Amphenol's Six Pack Coupler Modules are designed to incorporate splitters, WDMs, and tap couplers within a fiber optic patch panel. The modules are completely enclosed giving optimal protection to the fiber optic couplers. Six Pack Coupler Modules are available in a variety of configurations. Please contact the Inside Sales Department for more details. Cable Assemblies Amphenol provides a complete array of fiber optic patch cords and pigtails. Pigtails can be ordered pre-installed into the fiber management panels to reduce installation time and costs. All Amphenol patch cords and pigtails are manufactured of the highest quality materials and are 100% optically tested for insertion loss and back reflection. Six Packs Amphenol's 948 Series Six Packs are included with Amphenol fiber management panels. Additional Six Packs are available as outlined below. They are available with all variations of SC, FC, and ST adapters. Each six pack comes loaded with the designated adapter and nylatches for installation in Amphenol fiber management panels. Six Packs (with Adapters) Part Number Description 948-100-2111 948-100-2112 948-100-2113 948-100-2114 948-100-2115 948-100-2116 948-100-2127 948-100-2122 948-100-2123 948-100-2124 948-100-2128 948-100-2110 S/M SC S/M FC Flange S/M FC D-Hole S/M ST metal S/M SC Duplex S/M FC D-Hole, angle M/M SC M/M FC Flange M/M FC D-Hole M/M ST metal M/M SC Duplex Blank Cover Sleeve Type Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Metal Metal Metal Metal Metal n/a FRAMES AND ACCESSORIES Description Amphenol's 948 Series Frames and Accessories are designed to provide the necessary organization and protection required for fiber optic installations. Fiber protection and integrity has been considered throughout the Fiber Management System to insure that there is ample bend radii and cable routing. Products * Network Bays * Cable Troughs * End Panels * Rear Bay Doors * Cable Brackets * Installation Kits * Interbays * Cable Clamps * Vertical Routing Guides Network Bays (Frames) END PANEL 41.3" A full line of unequal flange network bays are available with either 19" or 23" mounting configurations. Bays can be preloaded with any variety of fiber management panels to suit a broad range of customer requirements and applications. UPPER CABLE TROUGH * Sturdy 11 gauge steel construction with a beige powder coat finish NETWORK BAY * 12-24 tapped holes with 1" vertical spacing 84.0" INTERBAY CABLE MANAGEMENT PANEL * Designed to meet telephone industry standards for Network Bay Frames and for Zone 4 Earthquake Braced Bays * Ground wire kit included with each frame LOWER CABLE TROUGH NOTE: 7'x23" network Bay shown with accessories Ordering Information Part No. Description Dimensions 948-2380 7' x 23" Network Bay, seismic zone 4 84.0"H x 26.0"W x 12"D 948-2381 7' x 19" Network Bay, seismic zone 4 84.0"H x 21.9"W x 12"D 948-2404 Rear Bay Doors 83.9"H x 26.0"W x 4.5"D 948-2447 948-2448 Anchor Kit, Non-Isolated, seismic zone 4 Anchor Kit, Isolated, seismic zone 4 n/a n/a 20 948 FRAMES SERIES AND ACCESSORIES END PANEL Cable Troughs Upper and Lower Cable Troughs are available for optimal cable routing flexibility. These troughs allow fiber optic cables to be safely routed between frames. * Mount on 19" or 23" frames * Transitions between vertical routing and horizontal routing UPPER and LOWER TROUGHS 16 GAUGE STEEL * Upper trough provides bend radius protection INTERBAY ELECTRICAL OUTLET PORTS Interbay Cable Management Panels REMOVABLE PANELS CABLE MANAGEMENT SPOOLS The Interbay Cable Management Panels provide an efficient and organized means of managing patchcords between fiber distribution frames. Patchcord slack can also be stored easily within the interbay spools. 84.0 2.6 84.0 12.0 INTERBAY BASE * Provides added bend radius protection entering/exiting panels HORIZONTAL INTERBAY * Versions available for vertical and horizontal management * Improves cable routing and organization * Stores excess patchcord slack 4.9 12.0 End Panels End Panels are used to provide protection at the end of a network bay line-up. They provide added protection and strength to the fiber distribution frames. The End Panels can be used in either right or left hand applications. * May be mounted directly to the rack or used with Interbay Cable Management Organizers * Includes covers and cutouts for AC receptacles, switches, and alarm lights * Provides protection in a frame line-up Products Part Number Description 948-2384 948-2453 948-2392 948-2394 948-2395 948-2399 948-2400 Interbay Cable Management Panel Horizontal Interbay (23" frames) 7' x 12" End Panels Upper Cable Trough (23" frames) Lower Cable Trough (23" frames) Upper Cable Trough (19" frames) Lower Cable Trough (19" frames) Dimensions 84.0"H x 4.9"W x12.0"D 8.0"Hx 23.0"W x 4.3"D 84.0"H x 2.6"W x12.0"D 6.4"Hx 23.4"W x 5.2"D 9.3"Hx 25.9"W x 5.2"D 6.4"Hx 19.4"W x 5.2"D 9.3"Hx 21.8"W x 5.2"D Amphenol Corporation Website www.amphenol.com Worldwide Service & Support AMERICAS EUROPE ASIA & R.O.W. Amphenol Corporation Wallingford, CT, U.S.A. Phone: +1-203-265-8900 E-mail: aphinfo@amphenol.com Amphenol European Sales Operations Houten, The Netherlands Phone: +31-30-6358-000 E-mail: info@amphenol-nl.com Amphenol Japan. K.K. Chiyoda-ku, Tokyo, Japan Phone: +81-3-3263-5611 E-mail: info@amphenol.co.jp Amphenol Canada Corp. Scarborough, Ontario, Canada Phone: +1-416-291-4401 E-mail: mattL@amphenolcanada.com Amphenol Gessellscaft GmbH Wien, Austria Phone: +43-1-895-1511 E-mail: info@amphenol-at.com Amphenol Daeshin Electronics Precision Co., Ltd. Kyungki-Do, Korea Phone: +82-32-680-3800 E-mail: info@amphenol.co.kr Amphenol Interconnect Products Corporation Endicott, NY, U.S.A. Phone: +1-607-754-4444 E-mail: sales@aipc.fabrik.com Amphenol Iberica Madrid, Spain Phone: +34-91-673-2235 E-mail: info@amphenol-it.com Amphenol Spectra-Strip Operations Hamden, CT, U.S.A. Phone: +1-203-281-3200 Email: sales@spectra-strip.com Amphenol RF Division Danbury, CT., U.S.A. Phone: 1-203-796-2000 E-mail: 104704.2600@compuserve.com Amphenol do Brasil LTDA (AIPC) Cacapava, SP, Brazil Phone: +55-12-253-2502 E-mail: sales@aipc.fabrik.com Amphenol Corp. Argentina Buenos Aires, Argentina Phone: +54-11-4341-4565 E-mail: amphenol_argentina@compuserve.com Amphenol do Brasil LTDA. Sao Paulo - SP, Brazil Phone: +55-11-5185-2881 E-mail: amphenol@amphenol.com.br Amphenol Corp. Mexico CP 11560 Mexico D.F. Mexico Phone:+52-5-254-7283 E-mail: amphenol_mex@compuserve.com Times Fiber Communications, Inc. Wallingford, CT, U.S.A. Phone: 1-203-265-8500 E-mail: aphinfo@amphenol.com Amphenol Italia S.p.A. Lainate (Milano), Italy Phone: +39-2-939-04192 Email: info@amphenol-it.com Amphenol Scandinavia Upplands Vasby, Sweden Phone: +46-8-594-10040 E-mail: info@amphenol-se.com Amphenol Limited Whitstable, Kent, Great Britain Phone: +44-227-773-200 E-mail: info@amphenol.co.uk Amphenol Socapex 948, Promenade de l'Arve B.P. 29 74311 Thyez, Cedex, France Phone: +33-4-50-89-28-00 E-mail: fo-specials@amphenolsocapex.fr Amphenol Air LB GmbH AM Kleinbahnhof 4 D-66740 Saarlouis Germany Phone: +49-6831-981-00 E-mail: info@amphenol-airlb.de Amphenol East Asia Ltd. Kowloon, Hong Kong Phone: +852-2699-2663 E-mail: info@amphenol.com.hk Amphenol Taiwan Corp. Taoyuan, Taiwan Phone: +886-3-379-5677 E-mail: info@amphenol.com.tw Amphenol South China Bao An, Shenzhen, China Phone: +86-755-719-9622 E-mail: +info@amphenol.com.cn Shenzhen (China) Office Shenzhen, China Phone: +86-755-368-3575 E-mail: info@amphenol.com.cn Guangzhou Amphenol Electronics Communications Guangzhou, China Phone: +86-20-3869-8808 E-mail: Thomang@gecamphenol.com Singapore Office Phone: +65-294-2128 E-mail: info@amphenol.com.sg Amphetronix Limited Bhosari Industrial Area Pune, India Phone: +91-20-7120363 E-mail: sales@amphenol-in.com Amphenol Australia Ltd. Keysborough Vic, Australia Phone: +61-3-8796-8888 E-mail: info@amphenol.com.au Fiber Optic Products www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com 1-800-944-6446