10.0-33.0 GHz Image Reject Mixer QFN, 4x4 mm M1001-QH November 2007 - Rev 20-Nov-07 Features Fundamental Image Reject Mixer 9.0 dB Conversion Loss 20.0 dB Image Rejection +25.0 dBm Input Third Order Intercept (IIP3) 4x4 mm, QFN -- ROHS Compliant General Description Mimix Broadband's 10.0-33.0 GHz GaAs MMIC fundamental image reject mixer with high linearity has a conversion loss of 9.0 dB with a 20.0 dB image rejection across the band. I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. This MMIC uses Mimix Broadband's GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. The device comes in a low-cost 4x4 mm QFN surface mount plastic package. This device is well suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications. Absolute Maximum Ratings Gate Bias Voltage (Vg) Input Power (RF Pin) Input Power (IF Pin) Storage Temperature (Tstg) Operating Temperature (Ta) +0.3 VDC +20.0 dBm +20.0 dBm -65 to +165 OC -55 to +125 OC Electrical Characteristics (Ambient Temperature T = 25o C) Parameter Frequency Range (RF) Frequency Range (LO) Frequency Range (IF) RF Return Loss (S11) IF Return Loss (S22) LO Return Loss (S33) Conversion Loss (S21) LO Input Drive (PLO) Image Rejection Isolation LO/RF Isolation LO/IF Isolation RF/IF Input Third Order Intercept (IIP3) Gate Bias Voltage (Vg1) Units GHz GHz GHz dB dB dB dB dBm dBc dB dB dB dBm VDC Min. 10.0 8.0 DC 12.0 -2.0 Typ. 10.0 TBD TBD 9.0 15.0 20.0 16.0 TBD TBD +25.0 -0.5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Max. 33.0 36.0 4.0 18.0 +0.1 Page 1 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-33.0 GHz Image Reject Mixer QFN, 4x4 mm M1001-QH November 2007 - Rev 20-Nov-07 Mixer Measurements XM1001-QH: USB Conversion Gain (dB) (VG=-0.5V, P_RF=-10 dBm, P_LO=15 dBm) XM1001-QH: LSB Conversion Gain (dB) (VG=-0.5V, P_RF=-10 dBm, P_LO=15 dBm) 0 0 USB-+25C USB_+75C USB_-40C -2 -4 Conversion Gain (dB) Conversion Gain (dB) -4 LSB_+25C LSB_+75C LSB_-40C -2 -6 -8 -10 -12 -14 -6 -8 -10 -12 -14 -16 -16 -18 -18 -20 -20 10 15 20 25 30 35 40 10 15 20 RF(GHz) [IF=2GHz] 0 5 -5 0 -10 Image Rejection (dBc) Image Rejection (dBc) 30 35 40 XM1001-QH: LSB Image Rejection (dBc) (VG=-0.5V, P_RF=-10 dBm, P_LO=15 dBm) XM1001-QH: USB Image Rejection (dBc) (VG=-0.5V, P_RF=-10 dBm, P_LO=15 dBm) -15 -20 -25 -30 USB-+25C USB_+75C USB_-40C -35 -5 -10 -15 -20 -25 -30 LSB_+25C LSB_+75C LSB_-40C -35 -40 -40 10 15 20 25 30 35 10 40 15 20 25 30 35 40 RF(GHz) [IF=2GHz] RF(GHz) [IF=2GHz] XM1001-QH: USB IIP3 (dBm) Vg = 0.5V, PLO = 15 dBm, 5dBm/tone, ? f=10 MHz XM1001-QH: LSB IIP3 (dBm) Vg = 0.5V, PLO = 15 dBm, 5dBm/tone, ? f=10 MHz 40 40 35 35 30 30 25 IIP3 (dBm) IIP3 (dBm) 25 RF(GHz) [IF=2GHz] 20 15 10 25 20 15 10 LSB_+25C USB_+25C 5 USB_-40C LSB_-40C 5 LSB_+75C USB_+75C 0 0 10 15 20 25 30 RF (GHz) [IF=2GHz] 35 40 10 15 20 25 30 RF (GHz) [IF=2GHz] Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 35 40 Page 2 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-33.0 GHz Image Reject Mixer QFN, 4x4 mm M1001-QH November 2007 - Rev 20-Nov-07 Mixer Measurements (cont.) XM1001-QH: Conversion Gain (dB) (VG=-0.5V, P_RF=-10 dBm, P_LO=15 dBm) XM1001-QH: LO to RF Isolation (dB), PLO = 15 dBm 0 0 +25C -40C +75C LSB USB -4 -10 Conversion Gain (dB) LO to RF Isolation (dB) -5 -2 -15 -20 -25 -30 -6 -8 -10 -12 -14 -16 -35 -18 -20 -40 10 15 20 25 Frequency (GHz) 30 35 40 10 15 20 25 30 35 RF(GHz) [IF=4GHz] Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 40 10.0-33.0 GHz Image Reject Mixer QFN, 4x4 mm M1001-QH November 2007 - Rev 20-Nov-07 Physical Dimensions (Note: Engineering designator is 20IRRFM0374) Functional Schematic GND 1 GND 2 GND GND IF1 GND VG GND 24 23 22 21 20 19 Pin Designations 18 GND 17 GND 16 GND 15 LO IN 0 GND 3 RF IN 4 90 GND 5 14 GND 6 13 7 8 9 10 11 12 GND GND IF2 GND GND GND Pin Number 1-3 4 5-8 9 10-14 15 16-19 20 21 22 23-24 Pin Name GND RF IN GND IF2 GND LO IN GND VG GND IF2 GND Pin Function Ground RF Input Ground Output IF 1 Ground LO Input Ground Gate bias Ground Output IF 1 Ground Nominal Value Units -0.5 Volts GND GND Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-33.0 GHz Image Reject Mixer QFN, 4x4 mm M1001-QH November 2007 - Rev 20-Nov-07 App Note [3] USB/LSB Selection - LSB For Upper Side Band Operation (USB): With IF1 and IF2 connected to the direct port (0) and coupled port (90) respectively as shown in the diagram, the USB signal will reside on the isolated port. The input port must be loaded with 50 ohms. USB For Lower Side Band Operation (LSB): With IF1 and IF2 connected to the direct port (0) and coupled port (90) respectively as shown in the diagram, the LSB signal will reside on the input port. The isolated port must be loaded with 50 ohms. IF2 IF1 Note: The coupled port can be used as an alternate input but the port location of the Coupled and Direct ports reverse. An alternate method of Selection of USB or LSB: -90 USB LSB In Phase Combiner In Phase Combiner -90o o IF2 IF1 IF2 IF1 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-33.0 GHz Image Reject Mixer QFN, 4x4 mm M1001-QH November 2007 - Rev 20-Nov-07 Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. The package is a low-cost plastic package. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 C of Peak Ramp Down Rate SnPb 3-4 C/sec 60-120 sec @ 140-160 C 60-150 sec 240 C 10-20 sec 4-6 C/sec Pb Free 3-4 C/sec 60-180 sec @ 170-200 C 60-150 sec 265 C 10-20 sec 4-6 C/sec Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. Part Number for Ordering XM1001-QH-0G00 XM1001-QH-0G0T XM1001-QH-EV1 Description Matte Tin plated RoHS compliant QFN 4x4 24L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN 4x4 24L surface mount package in tape and reel XM1001-QH Evaluation Board We also offer this part with alternative plating. Please contact your regional sales manager for more information regarding different plating types. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.