28
ED
28
Libertyville, IL (847) 680-7400
ED Series
Highest Performance Compact
RFIPower Line Filters
with IECConnectors
UL Recognized
CSA Certified
VDE Approved
EDSeries
EDseries filters are more effective than general-purpose
filters in applications where line-to-line and low-frequency
line-to-ground noise must be controlled; for example, to
bring equipment into compliance with FCC conducted
emissions standards.
The ED series offers significantly higher performance
than comparably sized filters, especially at high
frequencies, yet is in the EFseries package which
incorporates the IEC power line connector. Models ED1,
ED1C, and ED2 have .250” terminals on load side; ED4,
ED4C, ED8, and ED8C have wire leads.
Models 6ED1C, 10ED1C, 6ED4C, and 6ED8C additionally
incorporate a separate ground-circuit inductor to isolate
the equipment chassis from power line ground at RF
frequencies.
Electrical Schematics
ED Models
Specifications
Maximum leakage current, each
line-to-ground@ 120 VAC 60 Hz:.22 mA
@ 250 VAC 50 Hz:.38 mA
Hipot rating (one minute):
line-to-ground1500 VAC
line-to-line1450 VDC
Operating frequency:50/60 Hz
Rated voltage:120/250 VAC
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
CurrentFrequency-MHz
Rating.15.5151030
ED1, ED2
ED4, ED8
1A243542495254
3A202936455054
6A142330414550
10A81420353945
15A4 9 12283440
ED1C
6A142025374250
10A81420353945
ED4C, ED8C
6A142025374250
Line-to-line in 50 ohm circuit
CurrentFrequency-MHz
Rating.15.5151030
ED1, ED2
ED4, ED8
1A31520373736
3A31520373736
6A31520313534
10A82025384447
15A61823334447
ED1C
6A71723364242
10A82025384447
ED4C, ED8C
6A71723293842
Resistor location for reference only.
ED-C Models
Line Cord
Line Cord No. GA400:
7
1/2
foot, 3-conductor line cord to mate with ED series.
ED1/ED1C
ED2
ED4/ED4C
ED8/ED8C
Case Dimensions
Metric shown in italics.
AB C D EF
Part No.(max)(max)(max)± .015(max)(ref)
± .38
1ED1,2.211.190.811.5751.98
3ED356.030.220.640.0150.3
1ED2,1.551.190.851.5751.98
3ED239.430.221.640.0150.3
1ED4,1.551.190.851.5751.98.295
3ED439.430.221.640.0150.37.5
1ED8,1.551.190.811.5751.98.295
3ED839.430.220.640.0150.37.5
6ED12.211.190.811.5751.98
56.030.220.640.0150.3
6ED1C2.621.190.811.5751.98
66.530.220.640.0150.3
6ED21.551.190.851.5751.98
39.430.221.640.0150.3
6ED41.551.190.851.5751.98.295
39.430.221.640.0150.37.5
6ED4C1.981.190.851.5751.98.295
50.330.221.640.0150.37.5
6ED81.551.190.811.5751.98.295
39.430.220.640.0150.37.5
6ED8C1.981.190.811.5751.98.295
50.330.220.640.0150.37.5
10ED1,2.621.190.811.5751.98
15ED166.530.220.640.0150.3
10ED1C2.621.190.811.5751.98
66.530.220.640.0150.3
15ED81.981.190.811.5751.98
50.330.220.640.0150.3
29
ED
29
Libertyville, IL (847) 680-7400
Case Styles
Metric shown in italics.
ED1 &ED1C
Series ED
ED4 & ED4C
ED8 & ED8C
Typical dimensions
Terminals: (3)Holes: Dia.(2) Slots:
.07
1.8.07 x .16
1.8 x 4.1
.250
6.35
Typical dimensions
Wire leads: Min. 18 AWG Mounting holes: Dia.(2)
.132
3.35
4.0
101.6
Tolerance ±.005
0.13
*
*
Recommended Panel Cutouts
Panel Cutout (front mount)
ED2
Panel Cutout (front mount)
Tolerance ±.005
0.13
Available Part Numbers
1ED16ED2
1ED26ED4
1ED46ED4C
1ED86ED8
3ED16ED8C
3ED210ED1
3ED410ED1C
3ED815ED1
6ED115ED8
6ED1C
Line Cord No. GA400
Insulating Boot No. FA601
*15 ED1, 15ED8
UL, CSA 15 Amps/250VAC
VDE 10 Amps/250VAC
Ordering Information
Consult your local Corcom sales representative for pricing.
