RF360 Europe GmbH
A Qualcomm – TDK Joint Venture
®
RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of
RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.
is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to
EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.
RF360 Europe GmbH, Anzinger Str. 13, München, Germany
© 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved.
SAW Components
SAW filter
Radiolink
Series/type: B5148
Ordering code: B39192B5148U410
Date: February 03, 2012
Version: 2.0
These materials, including the information contained herein, may be used only for informational purposes by
the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or
the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)
or information contained herein without notice. The materials and information are provided on an AS IS basis,
and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or
implied, with respect to the materials, or any output or results based on the use, application, or evaluation of
such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,
copyrights or any other intellectual property rights or other rights of third parties.
No use of this documentation or any information contained herein grants any license, whether express, implied,
by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned
by QUALCOMM Incorporated or any of its subsidiaries.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to
others without the express written permission of RF360 Europe GmbH.
Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States
and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be
trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.
Diversion contrary to U.S. and international law is strictly prohibited.
SAW Components
SAW filter
Radiolink
Series/type:
Ordering code: B5148
B39192B5148U410
Date:
Version: February 03, 2012
2.0
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
2February 03, 2012
B5148
1900.00 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW filter
Data sheet
Application
RF filter for Radiolink-MPR
Unbalanced to Unbalanced operation
Low amplitude ripple
Usable passband of 35MHz
No matching required for operation at 50
Features
Package size 3.0 x 3.0 x 1.1 mm3
Package code DCC6C
RoHS compatible
Approximate weight 0.037 g
Ceramic Package for Surface Mount Technology
(SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitive Level 1
Filter surface passivated
Pin configuration
2 Input
5 Output
1,3,4,6 Case grounded
3February 03, 2012
B5148
1900.00 MHz
SAW Components
SAW filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Characteristics
Temperature range for specification: T = -40 ˚C to +85 ˚C
Terminating source impedance: ZS=50
Terminating load impedance: ZL=50
min. typ.
@ 25 ˚C max.
Center frequency fC 1900.0 MHz
Maximum insertion attenuation αmax
1882.5 ... 1917.5 MHz 2.6 3 dB
Amplitude ripple (p-p) ∆α
1882.5 ... 1917.5 MHz 0.6 1.0 dB
Group delay ripple (p-p) ∆τ
1882.5 ... 1917.5 MHz —516ns
Return loss
Input 1882.5 ... 1917.5 MHz 10 12 dB
Output 1882.5 ... 1917.5 MHz 10 12 dB
Attenuation α
1.0 ... 1760.0 MHz 35 47 dB
2040.0 ... 3000.0 MHz 35 45 dB
4February 03, 2012
B5148
1900.00 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW filter
Data sheet
Maximum ratings
Operable temperature range T –40/+85 ˚C
Storage temperature range Tstg –40/+85 ˚C
DC voltage VDC 0 V
ESD voltage VESD 501)
1) acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Vmachine model, 1 pulse
Input power at
1882.5 ... 1917.5 PIN 10 dBm 10,000hrs, Continuous wave
+85˚C
5February 03, 2012
B5148
1900.00 MHz
SAW Components
SAW filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Transfer function
Transfer function (wideband)
6February 03, 2012
B5148
1900.00 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW filter
Data sheet
Smith charts
S11 function
S22 function
7February 03, 2012
B5148
1900.00 MHz
SAW Components
SAW filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
References
Type B5148
Ordering code B39192B5148U410
Marking and package C61157-A7-A67
Packaging F61074-V8168-Z000
Date codes L_1126
S-parameters B5148_NB.s2p
B5148_WB.s2p
See file header for port/pin assignment table
Soldering profile S_6001
RoHS compatible defined as compatible with the following documents:
"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Matching coils See Inductor pdf-catalog
http://
www
.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
w
ww.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2012. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
t
he international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
t
he type in question please also contact one of our Sales Offices.
8February 03, 2012
Important notes
T
he following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.