BC807-16/-25/-40 0.3 Watts, PNP Plastic-Encasulate Transistor Small Signal Product Features SOT-23 Ideally suited for automatic insertion Epitaxial planar die construction For switching, AF driver and amplifer applications Complementary NPN type available (BC817) Mechanical Data Case : SOT- 23, Molded plastic Case material : Molded plastic, UL flammability classification rating 94V-0 Moisture sensitivity : Level 1 per J-STD-020C Terminals : Solderable per MIL-STD-202, method 208 Lead free plating Marking : -16: 5A, -25: 5B, -40: 5C Weight : 0.008grams (approximately) Ordering Information (example) Part No. Package Packing Packing code Packing code (Green) Manufacture code BC807-16 SOT-23 3K / 7 " Reel RF RFG B0 Note : Detail please see "Ordering Information(detail, example)" below. Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Parameter Symbol BC807-16 BC807-25 BC807-40 Units Collector-Base Breakdown Voltage IC = -10 A IE = 0 VCBO -50 V Collector-Emitter Breakdown Voltage IC = -10 mA IB = 0 VCEO -45 V Collector Current - Continuous IC -0.5 A Power Dissipation PD 0.3 W Emitter-Base Breakdown Voltage Collector Cut-Off Current IE = -1 A IC = 0 VEBO -5 V VCB = -45 V IE = 0 ICBO -0.1 A IB = 0 ICEO -0.2 A VCB = -40 V Collector Cut-Off Current VEB = -4 V IC = 0 IEBO -0.1 A Collector-Emitter Saturation Voltage IC = -500 mA IB = 50 mA VCE(sat) -0.7 V Base-Emitter Saturation Voltage IC = -500 mA IB = 50 mA VBE(sat) -1.2 V IC = -10 mA f = 100 MHz fT 100 MHz TJ 150 C TSTG -55 to +150 C Emitter Cut-Off Current Transition Frequency VCE = -5 V Junction Temperature Storage Temperature Range Parameter Symbol 807-16 DC Current Gain 807-25 807-40 VCE = -1 V IC = -100 mA hFE(1) Min Max 100 250 160 400 250 600 Units Version : E13 Small Signal Product RATINGS AND CHARACTERISTIC CURVES Fig. 2 Gain Bandwidth Product VS. Collector Current Fig. 1 Power Derating Curve 1000 See Note 1 TA = 25 oC f = 20 MHz fT, Gain Bandwidth Product (MHz) PD, Power Dissipation (mW) 400 300 -VCE = 5.0 V 100 200 100 -VCE = 1 V 10 0 0 50 100 150 1 200 10 100 1000 IC, Collector Current (mA) TSB, Substrate Temperature (oC) Fig.3 Collector Sat Voltage VS. Collector Current Fig. 4 DC Current Gain VS. Collector Current 1000 1000 - 50 oC -VCE = 1V 25 oC 100 hFE , DC Current Gain -IC, Collector Current (mA) 150 oC Typical - - - - - - - - Limits at TA = 25 oC 10 150 oC -IC / -IB = 10 1 25 oC 100 - 50 oC 0.1 0 0.1 0.2 0.3 0.4 10 0.5 0.1 -VCESAT , Collector Saturation Voltage (V) 10 100 1000 -IC , Collector Current (mA) Fig. 6 Typical Emitter-Collector Characteristics Fig.5 Typical Emitter-Collector Characterisitcs 100 500 2.8 3.2 1.4 400 0.4 2.4 1.6 300 1.0 200 1.2 0.8 0.6 100 0.35 80 2.0 1.8 -IC , Collector Current ( mA ) -Ic , Collector Current (mA) 1 0.3 60 0.25 0.2 40 0.15 20 0.1 0.4 - IB = 0.2 mA 0 0 1 -VCE , Collector-Emitter Voltage (V) - IB = 0.05 mA 0 2 0 10 20 -VCE , Collector-Emitter Voltage (V) Version : E13 Small Signal Product Ordering information (Detail, example) Part No. Package Packing Packing code Packing code (Green) Manufacture code BC807-xx (Note 1) SOT-23 3K / 7 " Reel RF RFG (Note 2) BC807-16 SOT-23 3K / 7 " Reel RF RFG BC807-16 SOT-23 3K / 7 " Reel RF RFG B0 BC807-16 SOT-23 3K / 7 " Reel RF RFG D0 Note 1 : "xx" is Device Code from "16" thru "40". Note 2 : Manufacture special control, if empty means no special control requirement. Dimensions DIM. Unit(mm) Unit(inch) Min Max Min Max A 2.70 3.10 0.106 0.122 B 1.10 1.50 0.043 0.059 C 0.30 0.51 0.012 0.020 D 1.78 2.04 0.070 0.080 E 2.10 2.64 0.083 0.104 F 0.89 1.30 0.035 0.051 G 0.550 REF 0.022 REF H 0.1 REF 0.004 REF Unit(mm) Unit(inch) Typ. Typ. A 0.95 0.037 B 2.0 0.079 C 0.9 0.035 D 0.8 0.031 Suggested PAD Layout DIM. Marking Part No. Marking BC807-16 5A BC807-25 5B BC807-40 5C Version : E13