http://www.tracopower.com Page 1 of 5
Industrial Power Supplies
TCL Series, 24–120 Watt
Features
◆ For Industrial, Office and Residential
Application
◆ Ultracompact Plastic Housing
◆ Connection by Cage Clamps Terminals
or plugable Screw Terminals
◆ Reliable snap-on Mounting on DIN-Rails
◆ Adaptor for Wall Mounting
◆ Universal Input 85-264 VAC, 50/60 Hz
◆ Models with 5, 12, 24 and 48 VDC Output
◆ Output Voltage adjustable
◆ Power Good Signal
◆ Low Ripple and Noise
◆ Overload and Short-Circuit Protection
◆ Parallel Operation possible
◆ Worldwide Safety Approvals
◆ Redundancy Module
◆ 3 Year Product Warranty
The TRACOPOWER TCL series are a family of DIN-Rail power supplies with an ex-
cellent price/performance ratio. With tightly regulated output voltage and high im-
munity against electrical disturbances on the mains they provide a reliable power
source for sensitive loads in industrial process controls, machine tools and other
equipment exposed to a difficult industrial environment. Compact size, light weight,
easy snap-on mounting on DIN-rails and the choice of two connection terminal
versions are other features of these power supplies. The TCL series complies with
all mayor safety standards for Europe (EN60950, EN50178), North America (UL/
cUL60950, UL508C listed) or elsewhere in the world (with CB-Report IEC60950).
Ordercode Input Voltage Output Power *Output Voltage Output Current Connection
Range max. nom. max.
TCL 024-105 5.1 VDC 4.0 A
TCL 024-112 24 W 12 VDC 2.0 A
TCL 024–124 24 VDC 1.0 A
TCL 060–112 12 VDC 4.0 A Detachable Screw
TCL 060–124 60 W 24 VDC 2.5 A Terminal Block
TCL 060–148 85 –264 VAC 48 VDC 1.25 A
TCL 120–112 Universal Input 120 W 12 VDC 8.0 A
TCL 120–124 50 / 60 Hz 24 VDC 5.0 A
TCL 024–124C 24 W 24 VDC 1.0 A
TCL 060–112C 12 VDC 4.0 A
TCL 060–124C 60 W 24 VDC 2.5 A Cage-Clamps
TCL 060–148C 48 VDC 1.25 A
TCL 120–112C 120 W 12 VDC 8.0 A
TCL 120–124C 24 VDC 5.0 A
Models
UL 60950 UL 508C
*Output adjustable
NE
W
http://www.tracopower.com Page 2 of 5
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Industrial Power Supplies
TCL Series 24–120 Watt
Input Specifications
Input voltage range 85...264 VAC / 85...375 VDC
output derating at operation between 85...93VAC/85...130VDC: 15% for TCL 060 & TCL 120 models
20% for TCL 024-112 & TCL 024-124
30% for TCL 024-105
Input frequency 47 – 63 Hz
Harmonic limits EN610000-3-2 Class A
Input current at full load (typ.) 115 VAC 230 VAC
TCL 24 models: 0.35 A 0.2 A
TCL 60 models: 1.2 A 0.6 A
TCL 120 models: 2.0 A 1.0 A
Recommended circuit breaker (characteristic C or slow blow fuse) 5.0 A
Output Specifications
Output voltage adj. range 5.1 VDC model: 5.0 – 5.25 VDC
(pot.meter on frontpanel) 12 VDC models: 12 – 15 VDC (12 - 16 VDC for TCL 024-112)
24 VDC models: 24 – 28 VDC
48 VDC models: 48 – 56 VDC
Output regulation (10 to 90% load variation) 2.5% (1% for TCL 60-112)
Ripple and Noise (20MHz Bandwidth) < 50 mV pk-pk
Electronic short circuit protection current limitation at 120 % typ
(constant current, automatic recovery
TCL 24 models: foldback, automatic recovery)
Parallel operation output current characteristic suitable for
parallel operation of max. 5 units
Overvoltage protection, triggerpoint 5.1 VDC model: < 6.5 VDC
12 / 24 VDC models: < 40 VDC
48 VDC models: < 60 VDC
Hold-up time 115 VAC 230 VAC
min. 15 ms min. 125 ms
Power good signal (TCL 60 & TCL 120 only) trigger output signal
point (reference to – Vout)
12 VDC models: >11V 11.0 V ±1.0V / 60 mA max.
24 VDC models: >22V 22.0 V ±2.0V / 30 mA max.
48 VDC models: >44V 44.0 V ±4.0V / 15 mA max.
General Specifications
Temperature ranges – Operating – 10 °C…+70 °C max.
– Storage (non operating) – 25 °C…+85 °C
Temperature derating – at 187...264 VAC or 265...375 VDC operation 1.7% /K above 50°C
– at 93...132 VAC or 130...187 VDC operation 1.1% /K above 40°C
– at 85...130 VDC operation 1.3% /K above 30°C
Humidity (non condensing) 95 % rel. H max.
Temperature coefficient 0.02 % /K
Switching frequency 55 – 180 kHz depending on load
(frequency modulation)
Efficiency 88% typ.
Isolation according to IEC/EN 60950, UL 60950,
UL 508, EN 50178, EN 60204, EN 61558-2-8
Reliability, calculated MTBF @ 25°C TCL 24 models: >2.68 Mio h
(according to IEC-1709) TCL 60 models: >2.94 Mio h
TCL 120 models: >1.62 Mio h
http://www.tracopower.com Page 3 of 5
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Safety standards IEC 60950, EN 60950 (output SELV),
UL 60950, UL 508, EN 50178,
EN 60204, EN 61558-2-8.
- NEC class 2 (TCL 60 models only)
Safety approvals (TCL 24 models pending) UL/cUL 60950 recognized, File E181381
UL 508C listed, File E210002
CB-Report per IEC 60950
Electromagnetic compatibility (EMC), Emissions EN 61000-6-3
Electromagnetic compatibility (EMC), Immunity EN 61000-6-2
Safety class degree of protection class 1
Case protection IP 20 (IEC 60529)
Enclosure material plastic FR2010-110C (UL 94V-0 rated)
Mounting 35 mm DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring)
Adapter for Wall-/Chassi Mounting (included)
Options output characteristic optimized for battery
charging available on request
Industrial Power Supplies
TCL Series 24–120 Watt
TCL–REM240 Redundancy Module
This module enables redundant operation of any two TCL models by decoupling
the 2 power supplies. It can also be used to separate sensitive loads from the main
power source.
Order code Inputs
Vin
Max power
per input
Output voltage Output current
max.
Connection
TCL–REM240 2 x 5...60 VDC 144 W Vin – 0.9 VDC 8 A detachable screw
terminal block
Models
Specifications
Operating temperature – 10°C...+70°C max. (14°F...+158°F)
derating above 40°C (104°F): 1.5%/K
Electromagnetic compatibility in correspondence to connected units
(no internal switching device)
Dimensions same as model TCL 24 (see page 4)
http://www.tracopower.com Page 4 of 5
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
27 (1.06)
2.2 (0.09)
100.0 (3.94)
75.0 (2.95)
DC-ON LED
Output voltage
adjust
INPUT
1 2 3
OUTPUT
1 2
Outline Dimensions mm (inches)
Industrial Power Supplies
TCL Series 24–120 Watt
TCL 24 and TCL-REM240
TCL 60
Weight: 140g (4.9 oz)
Weight: 265g (9.4 oz)
Output Innput
1 +Vout 1 AC Ground
2 –Vout 2 Neutral
3 Live
Output Innput
1 +Vout 1 AC Ground
2 +Vout 2 Neutral
3 –Vout 3 Live
4 –Vout
5 Power Good
75.0 (2.95)
100.0 (3.94)
3.2 (0.13)
45 (1.77)
DC-ON LED
Output voltage
adjust
OUTPUT
1 2 3 4 5
INPUT
1 2 3
Tolerances: ±0.5mm (±0.02)
Page 5 of 5
Specifications can be changed without notice
Outline Dimensions mm (inches)
J
enatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43311 4511 · Fax +41 43311 4545 · info@traco.ch · www.tracopower.com
Industrial Power Supplies
TCL Series 24–120 Watt
TCL 120
Weight: 440g (15.5 oz)
Output Innput
1 +Vout 1 AC Ground
2 +Vout 2 Neutral
3 –Vout 3 Live
4 –Vout
5 Power Good
Tolerances: ±0.5mm (±0.02)
Wall Mounting Bracket
Instead on a DIN-rail, the module can be
easily mounted on a chassis or wall with help of
a mounting bracket which is supplied as standard
with each Power Supply
Rev. 07/05