FUJITSU SEMICONDUCTOR DS04-28200-2F @ DESCRIPTION The MB40C568H is a high-speed A/D converter using high-speed CMOS process technology. m@ FEATURES * Resolution: 8 bits * Linearity error: +0.20% (Typ.) * Maximum conversion rate: 30 MSPS (Min.) * Power supply voltage:Analog section +5.0 V Digital section +3.0 V or +5.0 V * Digital input voltage range: TTL level * Digital output voltage range: CMOS level compatible * Analog input voltage range: 0.5 to 4 V (with 2 Vp-p) * Analog input capacity: 15 pF (Typ.) * Power consumption: 90 mW (Typical: @fcik = 30 MHz, AVop= 5 V, DVpp = 3 V) 110 mW (Typical: @fcix = 30 MHz, AVoo = DVop = 5 V) * Additional function: Reference voltage generator circuit: Vaert= 3 V, Vrers = 1 V * Package options: SOP24, SSOP24 m@ PACKAGES 24-pin, Plastic SOP 24-pin, Plastic SSOP (FPT-24P-M01) (FPT-24P-M03) This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, itis advised thatnormal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.MB40C568H m@ PIN ASSIGNMENT (TOP VIEW) AVop [_] 1 24|"] AVss AVop [| 2 23 [7] Vre AVss [| 3 22 [_] Vaere (LSB) De [_] 4 21 [/] Vina D7 [| 5 20 [|] Vaert De [| 6 19 [7] Vat Ds [| 7 18 [|] AVop Da [] 8 17 [|] AVss Ds [] 9 16 [7] AVop De [] 10 15 [_] AVss (MSB) D1 [] 11 14[7] CLK DVss [] 12 13 [|] DVbp FPT-24P-M01 FPT-24P-M03 @ PIN DESCRIPTION Pin No. Pin name Functions 1,2, 16, 18 AVobp Analog power supply pins (+5 V) 13 DVpp Digital power supply pin (+3 or +5 V) 3, 15, 17, 24 AVss Analog power ground pins (0 V) 12 DVss Digital power ground pin (0 V) 4to 11 D1 to De Digital output pins. Di: MSB, De: LSB 14 CLK Clock input pin 21 Vina Analog input pin. Input range: Vre to Vat (2 Vp-p between 0.5 to 4 V) 19 Vat Reference voltage input pin (3 V) 20 Vacer Reference voltage output pin. When connected to Vat, the pin generates 0.6 x AVop (3 V). 23 Vere Reference voltage input pin (1 V) 29 Vacee Reference voltage output pin. When connected to Vas, the pin generates 0.2 x AVpp (1 V). Values within () are typical values. m@ NOTES ON USE * Be sure to bypass the AVpp, DVpp, Vat and Vas pins to the ground using a high-frequency capacitor. The high-frequency capacitor should be connected as near the pin as possible. * Provide four clocks or more immediately after the power up to prevent current dissipation due to the indeterminate internal logic.m@ ABSOLUTE MAXIMUM RATINGS (See WARNING) MB40C568H Rating Parameter Symbol - Unit Min. Max. Power supply voltage AVobp, DVpp 0.3 0.7 Vv CLK, Vina Input voltage Var, Vee 0.3 AVop+0.3 Vv Output voltage D1 to De 0.3 DVpp+0.3 Vv Storage temperature Tstg 55 +125 C WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. m@ RECOMMENDED OPERATING CONDITIONS Parameter Symbol Value Unit Min. Typ. Max. Analog input voltage Vina Vre - Vat Vv Analog reference voltage: T Vat - - 4.00 Vv Analog reference voltage: B Vre 0.50 - - Vv Analog reference voltage range VatVre 1.90 2.00 2.10 Vv Digital "H level input voltage Virb 2.4 - - Vv Digital L level input voltage Vito - - 0.8 Vv Digital input current lio - - 5 LA Clock frequency foik 0.1 - 30 MHz Minimum H level clock pulse width tw* 14.0 - - ns Minimum L level clock pulse width tw- 14.0 - - ns Operating temperature range Ta 20 - 70 C WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All the devices electrical characteristics are warranted when operated within these ranges. Always use semiconductor devices within the recommended operating conditions. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representative beforehand. (Continued)MB40C568H (Continued) When using a single power supply Value Parameter Symbol - Unit Min. Typ. Max. Power supply voltage AVobp, DVpp 4.75 5.00 5.25 Vv When using dual power supplies Value Parameter Symbol Unit Min. Typ. Max. AVbp 4.75 5.00 5.25 Vv Power supply voltage DVpp 2.70 3.00 3.30 Vv WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All the devices electrical characteristics are warranted when operated within these ranges. Always use semiconductor devices within the recommended operating conditions. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representative beforehand.m@ ELECTRICAL CHARACTERISTICS (Using a Single Power Supply) DC Characteristics (1) Analog section MB40C568H (AVoo = DVpn = 4.75 V to +5.25 V, Ta = 20C to +70C) Value Parameter Symbol Unit Min. Typ. Max. Resolution - - 8 - bit Linearity error . LE - +0.20 +0.30 % - - DC precision Differential linearity error DLE - +0.12 +0.20 % Analog input capacity Cina - 15 - pF Reference voltage: T Vrert - 0.6 x AVbp - Vv Reference voltage: B VreEFB - 0.2 x AVbp - Vv Reference current IRB 16.0 8.0 2.0 mA Analog power supply current Alpp - 16.0 28.0 mA Digital power supply current Dlpp - 6.0 10.0 mA (2) Digital section (AVoo = DVpn = 4.75 V to +5.25 V, Ta = 20C to +70C) Value Parameter Symbol - Unit Min. Typ. Max. Digital H level output voltage VoHp 4.2 - DVop Vv Digital L level output voltage Voip - - 0.4 Vv Digital H level output current lon 400 - - LA Digital L level output current lou - - 1.6 mA (3) Switching section (AVop = DVpp = 4.75 V to +5.25 V, Ta = 20C to +70C) Value Parameter Symbol - Unit Min. Typ. Max. Maximum conversion rate fs 30 - - MSPS Digital output delay time tpd 0 5 15 nsMB40C568H m@ ELECTRICAL CHARACTERISTICS (Using Dual Power Supplies) DC Characteristics (1) Analog section (AVop = 4.75 V to +5.25 V, DVpp = 2.70 V to +3.30 V Ta = -20C to +70C) Value Parameter Symbol Unit Min. Typ. Max. Resolution - - 8 - bit Linearity error . LE - +0.20 +0.30 % - - DC precision Differential linearity error DLE - +0.12 +0.20 % Analog input capacity Cina - 15 - pF Reference voltage: T Vrert - 0.6 x AVbp - Vv Reference voltage: B VreEFB - 0.2 x AVbp - Vv Reference current IRB 16.0 8.0 2.0 mA Analog power supply current Alpp - 16.0 28.0 mA Digital power supply current Dlpp - 4.0 7.0 mA (2) Digital section (AVop = 4.75 V to +5.25 V, DVpp = 2.70 V to +3.30 V Ta = -20C to +70C) Value Parameter Symbol - Unit Min. Typ. Max. Digital H level output voltage VoHp 2.4 - DVop Vv Digital L level output voltage Voip - - 0.4 Vv Digital H level output current lon 400 - - LA Digital L level output current lou - - 1.6 mA (3) Switching section (AVop = 4.75 V to +5.25 V, DVpp = 2.70 V to +3.30 V Ta = -20C to +70C) Value Parameter Symbol - Unit Min. Typ. Max. Maximum conversion rate fs 30 MSPS Digital output delay time tpd 0 6 18 nsMB40C568H @ EQUIVALENT CIRCUIT Clock input AVop CLK AVss * Analog input AVop Vina oo AVss Reference voltage input AVbp AVop Vat Vrs AVss AVss Reference voltage output - AVbp AVop Vrert VREFB AVss i AVss Digital output DVbp oe D: to Ds DVssMB40C568H @ TIMING CHART CLK : SAMPLEn , SAMPLEn-1 Vina Vou . D1 to D8 4 x DATAn-2 a DATAn-1 x DATAn Kos DVbp VoL @ DIGITAL OUTPUT BUFFER LOAD CIRCUIT To measurement pin on Measurement point T C= 15 pF DVss (Note) C. value includes the floating capacitance of the jig and probe.MB40C568H @ ORDERING INFORMATION Part number Package Remarks 24-pin, Plastic SOP (FPT-24P-M01) 24-pin, Plastic SSOP (FPT-24P-M03) MB40C568HPF MB40C568HPFVMB40C568H 10 m@ PACKAGE DIMENSIONS 24-pin, Plastic SOP (FPT-24P-M01) 15.24 520 {600 oee) PHAR ARRAS INDEX HEHEHE REE E en 0 0.45+0.10 TYP 0184004) 12] 20.13(.005) @ | {7[0.10(.004) | 13.97(.550)REF 1994 FUJITSU LIMITED F240075-30-4 5.3040.30 7.8040.40 (.2094.012) (.307+.016) >] 2.25(.089)MAX (MOUNTING HEIGHT) 0.05(.002)MIN (STAND OFF) 6.80 520 (268 css 0.15 502 0.50+0.20 "A" part r Details of Dimensions in mm (inches). (006 0oF ) 0. 0.50(. 0.18(.007)MAX | .02 MAX | (.0204.008) (Continued)MB40C568H (Continued) 24-pin, Plastic SSOP *: These dimensions do not include resin protrusion. (FPT-24P-M03) 40.20 * 7.750. 10(.305+.004) 1.25 -o'10 sere PHAR HAHAH HAE *5.60+0.10 7.60+0.20 INDEX (.220+.004) (.299+.008) 6.60(.260) NOM EERE Goof a ee | |.0.65+0.12(.0256+.0047) 0.22308 0.15 02 Details of "A" part (.009~t02) (006007) | | | 0.10+0.10(.004+.004) ! (STAND OFF) (AAAS 1 ! | = | q | | | | 7.15(.281)REF | Oto 10> | \ 0.50+0.20 ' (.020+.008) 1994 FLITSU LIMITED F240188-20-2 Dimensions in mm (inches). 11MB40C568H FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 F9703 FUJITSU LIMITED Printed in Japan All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.