

74LVT08
3.3V Quad 2-input AND gate
Product specification 1996 May 29
INTEGRATED CIRCUITS
IC24 Data Handbook
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
2
1996 May 29 853-1837 16863
QUICK REFERENCE DATA
SYMBOL PARAMETER TEST CONDITIONS
Tamb = 25°C; GND = 0V TYPICAL UNIT
tPLH
tPHL Propagation delay
An or Bn to Yn CL = 50pF;
VCC = 3.3V 3.0
3.4 ns
CIN Input capacitance VI = 0V or 3.0V 4 pF
ICCL Total supply current Outputs Low; VCC = 3.6V 1 mA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. #
14-Pin Plastic SO –40°C to +85°C74LVT08 D 74LVT08 D SOT108-1
14-Pin Plastic SSOP –40°C to +85°C74LVT08 DB 74LVT08 DB SOT337-1
14-Pin Plastic TSSOP –40°C to +85°C74LVT08 PW 74LVT08PW DH SOT402-1
PIN CONFIGURATION
14
13
12
11
10
9
87
6
5
4
3
2
1
GND
VCC
B2
A2
Y2
Y3
B3
A3
A0
B0
Y1
Y0
A1
B1
SA00342
PIN DESCRIPTION
PIN
NUMBER SYMBOL NAME AND FUNCTION
1, 2, 4, 5, 9,
10, 12, 13 An-Bn Data inputs
3, 6, 8, 11 Yn Data outputs
7 GND Ground (0V)
14 VCC Positive supply voltage
LOGIC SYMBOL
A0
B0
A1
B1
A2
Y0
B2
A3
B3
Y1
Y2
Y3
VCC = Pin 14
GND = Pin 7
3
6
8
11
1
2
4
5
9
10
12
13
SA00344
LOGIC DIAGRAM
B1A0 B0 A1 A2 B2 A3 B3
Y0 Y1 Y2 Y3
36811
12459101213
VCC = Pin 14
GND = Pin 7
SA00343
LOGIC SYMBOL (IEEE/IEC)
1
2
4
5
9
10
12
13
&3
6
8
11
SV00061
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 3
FUNCTION TABLE
INPUTS OUTPUT
Dna Dnb Qn
L L L
L H L
H L L
H H H
NOTES:
H = High voltage level
L = Low voltage level
ABSOLUTE MAXIMUM RATINGS1, 2
SYMBOL PARAMETER CONDITIONS RATING UNIT
VCC DC supply voltage –0.5 to +4.6 V
IIK DC input diode current VI < 0 –50 mA
VIDC input voltage3–0.5 to +7.0 V
IOK DC output diode current VO < 0 –50 mA
VOUT DC output voltage3Output in Off or High state –0.5 to +7.0 V
I
DC out
p
ut current
Output in High state –32
mA
I
OUT
DC
o
u
tp
u
t
c
u
rrent
Output in Low state 64
mA
Tstg Storage temperature range –65 to 150 °C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
LIMITS
UNIT
SYMBOL
PARAMETER
MIN MAX
UNIT
VCC DC supply voltage 2.7 3.6 V
VIInput voltage 0 5.5 V
VIH High-level input voltage 2.0 V
VIL Low-level Input voltage 0.8 V
IOH High-level output current –20 mA
IOL Low-level output current 32 mA
t/vInput transition rise or fall rate; Outputs enabled 10 ns/V
Tamb Operating free-air temperature range –40 +85 °C
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 4
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions
Voltages are referenced to GND (ground = 0V)
LIMITS
SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT
MIN TYP1MAX
VIK Input clamp voltage VCC = 2.7V ; IIK = –18mA –1.2 V
VCC = 2.7 to 3.6V ; IOH = –100µA VCC–0.2
VOH High-level output voltage VCC = 2.7V ; IOH = –6mA 2.4 V
VCC = 3.0V ; IOH = –20mA 2.0
VCC = 2.7V ; IOL = 100µA 0.2
VOL Low-level output voltage VCC = 2.7V ; IOL = 24mA 0.5 V
VCC = 3.0V ; IOL = 32mA 0.5
I
In
p
ut leakage current
VCC = 0 or 3.6V ; V I = 5.5V 10
µA
I
I
Inp
u
t
leakage
c
u
rrent
VCC = 3.6V ; V I = VCC or GND ±1µ
A
IOFF Output off current VCC = 0V ; VI or VO = 0 to 4.5V ±100 µA
ICCH
Quiescent su
pp
ly current
VCC = 3.6V ; Outputs High, VI = GND or
VCC, IO = 00.02
mA
ICCL
Q
u
iescent
s
u
ppl
y
c
u
rrent
VCC = 3.6V ; Outputs Low, VI = GND or VCC,
IO = 01 2
mA
ICC Additional supply current per input pin2VCC = 3V to 3.6V; One input at VCC–0.6V,
Other inputs at VCC or GND 0.2 µA
CIInput capacitance VI = 3V or 0 4 pF
COOutput capacitance VO = 3V or 0 10 pF
NOTES:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
2. This is the increase in supply current for each input at the specificed voltage level other than VCC or GND.
AC CHARACTERISTICS
GND = 0V ; tR = tF = 2.5ns; CL = 50pF, RL = 500; Tamb = –40°C to +85°C.
LIMITS
SYMBOL PARAMETER WAVEFORM VCC = 3.3V ± 0.3V VCC = 2.7V UNIT
MIN TYP1MAX MAX
tPLH
tPHL Propagation delay
An or Bn to Yn 11.0
1.0 3.0
3.4 3.9
4.6 4.7
4.8 ns
NOTE:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
AC WAVEFORMS
VM = 1.5V, VIN = GND to 2.7V
VM
VM
VM
VM
Qn
Dna, Dnb
tPLH tPHL
SF00054
W aveform 1. Propagation Delay for Non-Inverting Outputs
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 5
TEST CIRCUIT AND WAVEFORMS
VMVM
tWAMP (V)
NEGATIVE
PULSE 10% 10%
90% 90%
0V
VMVM
tW
AMP (V)
POSITIVE
PULSE
90% 90%
10% 10% 0V
tTHL (tF)
tTLH (tR)t
THL (tF)
tTLH (tR)
VM = 1.5V
Input Pulse Definition
DEFINITIONS
RL = Load resistor; see AC CHARACTERISTICS for value.
CL = Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
RT = Termination resistance should be equal to ZOUT of
pulse generators.
INPUT PULSE REQUIREMENTS
FAMILY Amplitude Rep. Rate tWtRtF
74LVT 2.7V 10MHz 500ns 2.5ns 2.5ns
PULSE
GENERATOR
VIN
D.U.T.
VOUT
CL
VCC
Test Circuit for Outputs
RTRL
SV00022
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 6
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 7
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 8
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
1996 May 29 9
NOTES
Philips Semiconductors Product specification
74LVT083.3V Quad 2-input AND gate
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appl iances, devices,
or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
DEFINITIONS
Data Sheet Identification Product Status Definition
Objective Specification
Preliminary Specification
Product Specification
Formative or in Design
Preproduction Product
Full Production
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation
register eligible circuits under the Semiconductor Chip Protection Act.
Copyright Philips Electronics North America Corporation 1996
All rights reserved. Printed in U.S.A.
(print code) Date of release: July 1994
Document order number: 9397-750-04845
Philips Semiconductors - PIP - 74LVT08; 3.3 V Quad 2-input AND gate
Philips Semiconductors Home
Product
catalog
Buy
online
MySemiconductors
Contact
Products
MultiMarket
Semiconductors
Product Selector
Catalog by
Function
Catalog by
System
Cross-reference
Packages
End of Life
information
Distributors Go
Here!
Models
SoC solutions
74LVT08; 3.3 V
Quad 2-input AND
gate
Information as of 2003-04-22
My.Semiconductors.COM.
Your personal service from
Philips Semiconductors.
Please register now !
Stay informed
Use right mouse button to
download datasheet
Download datasheet
General description Features Applications Datasheet
Block diagram Buy online Support & tools Email/translate
Products & packages Parametrics Similar products
top
Applications
Download
PDF
File
AN2022: The Behavior Of Integrated Bus Hold Circuits (date 01-Mar-96)
Download
PDF
File
AN203_2: Test Fixtures for High Speed Logic (date 02-Apr-98)
Download
PDF
File
AN2301: Simulation Support for Philips' Advanced BiCMOS Products
Download
PDF
File
AN243: LVT (Low Voltage Technology) and ALVT (Advanced LVT) (date 01-Jan-98)
Download
PDF
File
AN246: Transmission Lines and Terminations with Philips Advanced Logic Families
top
Datasheet
Type number Title Publication release
date Datasheet status Page
count File size
(kB) Datasheet
74LVT08 3.3 V
Quad 2-
input
AND
gate
5/29/1996 Product specification 10 87
Download
PDF
File
Download
top
Blockdiagram(s)
Block diagram of
74LVT08D
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74LVT08D.html (1 of 3) [May-09-2003 6:00:02 PM]
Submit Query
Philips Semiconductors - PIP - 74LVT08; 3.3 V Quad 2-input AND gate
top
Parametrics
Type
number Package Description Propagation
Delay(ns) Voltage No.
of
Pins
Power
Dissipation
Considerations
Logic
Switching
Levels
Output
Drive
Capability
74LVT08D SOT108-1
(SO14)
3.3V Quad
2-Input
AND Gate 4~6 Low 14 None TTL Medium
74LVT08DB SOT337-1
(SSOP14)
3.3V Quad
2-Input
AND Gate 4~6 Low 14 None TTL Medium
74LVT08PW SOT402-1
(TSSOP14)
3.3V Quad
2-Input
AND Gate 4~6 Low 14 None TTL Medium
top
Products, packages, availability and ordering
Type
number North
American
type number
Ordering code
(12NC) Marking/Packing
Download
PDF
File
IC packing info Package Device
status Buy online
74LVT08D 74LVT08D 9352 090 20112 Standard Marking
* Tube SOT108-1
(SO14) Full production
order this
product
online
-
74LVT08D-
T 9352 090 20118 Standard Marking
* Reel Pack,
SMD, 13"
SOT108-1
(SO14) Full production
order this
product
online
-
74LVT08DB 74LVT08DB 9352 090 30112 Standard Marking
* Tube SOT337-1
(SSOP14) Full production
order this
product
online
-
74LVT08DB-
T 9352 090 30118 Standard Marking
* Reel Pack,
SMD, 13"
SOT337-1
(SSOP14) Full production
order this
product
online
-
74LVT08PW 74LVT08PW 9352 090 40112 Standard Marking
* Tube
SOT402-1
(TSSOP14)
Full production
order this
product
online
-
74LVT08PW-
T 9352 090 40118 Standard Marking
* Reel Pack,
SMD, 13"
SOT402-1
(TSSOP14)
Full production
order this
product
online
-
Products in the above table are all in production. Some variants are discontinued; click here for information on
these variants.
top
Similar products
Products
similar
to
74LVT08
74LVT08 links to the similar products page containing an overview of products that are similar in
function or related to the type number(s) as listed on this page. The similar products page includes products
from the same catalog tree(s), relevant selection guides and products from the same functional category.
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74LVT08D.html (2 of 3) [May-09-2003 6:00:02 PM]
Philips Semiconductors - PIP - 74LVT08; 3.3 V Quad 2-input AND gate
top
Support & tools
Download
PDF
File
Innovative Low Voltage Logic Solutions(date 01-Aug-00)
Download
PDF
File
Introduction to Advanced BiCMOS Logic Products(date 01-Mar-98)
Download
PDF
File
Family specifications LVT, family characteristics(date 01-Mar-98)
Download
PDF
File
Advanced BiCMOS features(date 01-Jan-98)
top
Email/translate this product information
Email this product information.
Translate this product information page from English to:
The English language is the official language used at the semiconductors.philips.com website and webpages.
All translations on this website are created through the use of Google Language Tools and are provided for
convenience purposes only. No rights can be derived from any translation on this website.
About this Web Site
| Copyright © 2003 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74LVT08D.html (3 of 3) [May-09-2003 6:00:02 PM]
French
Translate