Infrared Thermosensor ES1B CSM_ES1B_DS_E_3_2 Achieve Low-cost Measurements with an Infrared Thermosensor. * The ES1B has an electromotive output as high as that of a thermocouple, thus connecting directly to the thermocouple input terminal of the Temperature Controller is possible. * Four temperature ranges are available to cover a wide range of temperature measurement needs, including those in the food processing, packaging, molding, and electronics industries. * High-accuracy temperature measurement is ensured by a high-speed response of 300 ms (for a 63% response) and an indication reproducibility of 1% PV. * Unlike thermocouples, the Thermosensor does not deteriorate. Therefore, stable, real-time temperature control can be maintained. Refer to Safety Precautions for All Temperature Controllers. Ordering Information List of Models Appearance and sensing characteristic 2 mm 20 mm 40 mm Specification (temperature range) 10 to 70C 60 mm Model ES1B 60 to 120C 115 to 165C 140 to 260C 2 dia. 20 dia. 40 dia. 60 dia. Application Examples Temperature Control of Ironing Portion Film Temperature Measurement of Sheet Molding Machines and Resin Extrusion Machines DC power supply Vertically heating rolls Resin Note: 1. Either a 12 VDC or 24 VDC power supply is required for the ES1B. 2. To measure the difference in temperature between two points, use two isolated power supplies. ES1B Power supply (+) ES1B Conveyor ES1B Power supply (-) DC power supply Output (+) Horizontally heating rolls Output (-) Molding trays Output (-) Output (+) Temperature Controller ES1B Detecting Excessive Heat Radiation of High-tension Distribution Boards or Transformers Detecting Excessive Heat Radiation of Bearings Power supply (+) Power supply (-) DC power supply ES1B ES1B ES1B Output (+) High-tension line DC power supply Output (-) Output (-) Temperature Output (+) Controller ES1B High-tension distribution panel Bearing Power supply (+) DC power supply Power supply (-) Do not use the Infrared Thermosensor in locations where the ambient temperature changes rapidly. To use the Infrared Thermosensor in locations subject to rapid changes in temperature due to radiant heat or movement of hot air, use a heat shield or other method to reduce rapid changes in temperature as much as possible. 1 ES1B Specifications Ratings/Characteristics Item ES1B Power supply voltage 12/24 VDC Operating voltage range 90% to 110% of the power supply voltage Current consumption 20 mA max. Measuring temperature range Accuracy (See note 1.) 10 to 70C, 60 to 120C, 115 to 165C, 140 to 260C 5C (See note 2.) 2% PV or 2C, whichever is larger 10C (See note 2.) 4% PV or 4C, whichever is larger 30C (See note 2.) 6% PV or 6C, whichever is larger 40C (See note 2.) 8% PV or 8C, whichever is larger Reproducibility 1% PV or 1C, whichever is larger Temperature drift 0.4C/C max. Sensing distance vs. sensing diameter 1:1 typ. Measurement wavelength 6.5 to 14.0 m Receiver element Thermopile Response speed Approximately 300 ms at response rate of 63% Output impedance 1 to 4 k Operating temperature -25C to 70C (with no icing or condensation) Allowable ambient humidity 35% to 85% Vibration resistance (destruction) 98 m/s2 for 2 hours each in X, Y, and Z directions at 10 to 55 Hz Shock resistance (destruction) 300 m/s2 for 3 times each in X, Y, and Z directions Casing material ABS resin Degree of protection IP65 Applicable safety standards CE Marking Weight Approx. 120 g Cable Compensating conductor: 3 m PVC-covered cable with a shield wire resisting 70C Note: 1. Based on characteristics of K-type thermocouple and radiation rate of 0.98. 2. The accuracy is given as the change in temperature from any reference temperature of the sensing object. For example, if the reference temperature is 50C, the accuracy at 55C would be 2% PV or 2C, whichever is larger and the accuracy at 60C would be 4% PV or 4C, whichever is larger. Dimensions Note: All units are in millimeters unless otherwise indicated. ES1B 44.5 6.5 17.8 3,000 ABS resin Polyolefin tube Mounting Lock Nuts (Two) (Provided) Green, Output + White, Output - 14.2 dia. 15 36.5 Screw M18x1.0 PVC-covered (-25C to 70C) 24 Orange, Power + Shield, Power - 26 7 Adjustment Methods Adjust the Thermosensor as described below before using it. Adjust the Thermosensor according to the conditions of the sensing object and characteristics of the Temperature Controller. Offset Compensation for Target Value with Input Shift Function 2 ES1B The error caused at the time the Thermosensor is connected to the Temperature Controller. PV display of Temperature Controller Temperature characteristics of target sensing object Compensated with the input shift function of the Temperature Controller Temperature Controller (such as E5CS) Target value (Actual temperature of sensing object sample) Gain and Offset Compensation with Two-point Shift Function PV display of Temperature Controller The error caused by the condition of the sensing objects or at the time the Thermosensor is connected to the Temperature Controller. Upper limit side Upper limit of SV of Temperature Controller Temperature Controller (such as E5@N or E5@K) Lower limit side Compensated with the two-point shift function (for the upper and lower sides) of the Temperature Controller. Lower limit of SV of Temperature Controller Target value (Actual temperature of sensing object sample) Connections Green, Output + + White, Output - Thermocouple (K) - input terminals Temperature Controller Orange, Power + 12/24 VDC Shield, Power - GND DC power supply Safety Precautions Refer to the ES1B Infrared Thermosensor datasheet (Cat. No. H127) for application precautions. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 3 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2014.4 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2014 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: ES1B 140-260C ES1B 60-120C