5015 PERFORMANCE WITH IMPROVED BAYONET COUPLING ITT Cannon CA-B / CB series bayonet connectors are similar to standard MIL-DTL-5015 (MIL-5015), but use an improved coupling system - a quick-mating 3-point reverse-bayonet lock. ITT Cannon CA-B / CB series bayonet connectors have the same shell dimensions, contact layouts and performance characters as a standard 5015, but they are not intermateable. CA-B / CB bayonet connectors are harsh environment connectors excellent for military ground systems and vehicles. ITT Cannon CA-B / CB connectors are mil-spec, qualified to VG 95234 NATO specifications. Hundreds of contact layouts are available. Common variations include 2-pin connectors, 3-pin connectors, 4-pin connectors, 12-pin connectors and 16-pin connectors. The CA-B / CB is a waterproof connector that is completely sealed and resistant to condensation, vibration, and flash-over. For full product details on the CA-B / CB bayonet series, see the specifications below. APPLICATIONS FEATURES Industrial environments requiring extreme environmental reliability and ease of mating and unmating, such as: * Power generators * Earth-moving equipment * Battery systems * Ships * Engines * Railroad equipment * Sensors * Mobile equipment * Motion control * Industrial machinery * Off-road vehicles * Telecommunications FULL MILITARY TEMPERATURE RANGE CB connectors will operate in temperatures from -55 to +125C (-67 to +257F) under the harshest possible conditions. RUGGED SHELL Aluminum alloy shell and hardware create a rugged connector with minimal weight. These connectors have been used extensively in the military for many years and have proven their reliability in a wide range of combat and industrial applications. WIDE RANGE OF WIRE GAUGES AND CURRENT-CARRYING CAPABILITY Up to 245 amps with wire gauges from size 26 up to size 0 AWG. RESILIENT INSULATOR & GROMMET A resilient polychloroprene insulator and rear sealing grommet guarantees a liquid-tight assembly. Crimp contacts can be inserted and removed a minimum of five cycles for field service. WIDE VARIETY OF CONTACTS High-reliability screw machine contacts with silver or gold plating are available in sizes from 20 through 0 to accommodate wire gauges from 24 to 0 AWG. Solder, crimp, PC, and thermocouple contacts are available. ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ITT Cannon CA-B/CB Series Bayonet Connectors ENVIRONMENTAL Vibration and water-proof. Will perform in the full range of MIL-DTL-5015 or VG 95234 environments. SIMPLE MATING AND UN-MATING CB bayonet style connectors use a unique "reverse bayonet" coupling system for ease of use. This system allows mating and un-mating of the connector halves with a simple 120 rotation - without compromising shock, vibration or moisture resistance. The coupling nut employs the exclusive Cannon "roller bolt" which is actually three small stainless steel wheels that roll down the mating ramps. The large, open ramps can be easily cleaned. The roller bolt and ramp coupling system eliminates the possibility of cross threading and thread damage possible with standard MIL-DTL-5015 threaded connectors. This quick mating design is easier to mate in cold weather, tight spaces, or on equipment which must be disassembled frequently. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 99 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS FEATURES (C ON T.) PROVEN RELIABILITY CA-Bayonet has been used extensively in military vehicles such as the M1 Tank, the Hummer, advanced locomotives, transit cars and auxiliary equipment. INTERMATEABLE AND INTERMOUNTABLE WITH ALL VG 95234 CONNECTORS The standard MIL-DTL-5015 layouts and dimensions ensure intermateability and intermountability with all connectors made in accordance with VG 95234. When front mounted, all CB connectors are intermountable with standard threaded MIL-DTL-5015 connectors, making it possible to upgrade without the need to change panel cutouts or clearances in most cases. AUDIBLE, VISUAL & TACTILE CONFIRMATION OF MATING CB connectors provide the user with 3 independent checks that the connector halves are mated. When the coupling nut is fully rotated, the three roller bolts snap into the end of the ramps with a loud "click" (audible confirmation). At that same moment, the user can actually feel the bolts click into the grooves (tactile confirmation). A red arrow on the receptacle and a red dot on the coupling nut are aligned when the connector is properly mated (visual confirmation). AGENCY APPROVALS Numerous European & International Rail Approvals (Contact us for current listing) * VG 95234 ENVIRONMENTAL SEALING The sealing of this connector is not compromised by any of the operating conditions defined in MIL-DTL5015 or VG 95234. Mated connectors are completely watertight when tested to 1 bar (35 feet) per the requirements of the VG 95234 specification. Unlike CT connectors, the receptacle contacts are not bonded into the inserts unless requested by the end user. TECH SPECS MATERIALS & FINISHES Shell Shell Plating Contacts Contact Platings Insulator* Aluminum alloy (shells can be grounded) Olive drab chromate coating over cadmium plating, black zinc cobalt, bright nickel or green zinc Copper alloy Hard silver plating or gold plating Resilient polychloroprene (Neoprene) Seals Silicone or Neoprene *Optional zero halogen and high temperature insulators are available. Contact us for information. ELECTRICAL DATA Operating Voltage/Test Voltage According to MIL-DTL-5015 SERVICE RATING OPERATING VOLTAGE DC V AC VRMS TEST VOLTAGE AC VRMS AIR SPACING NOM. (INCHES) CREEPAGE DISTANCE NOM. (INCHES) 1/16 I 250 200 1,000 - A 700 500 2,000 1/16 1/8 D 1,250 900 2,800 1/8 3/16 E 1,750 1,250 3,500 3/16 1/4 B 2,450 1,750 4,500 1/4 5/16 Current Rating at 68 F (+20C) CONTACT SIZE (CB) MAX. CURRENT (AMPS) 16/16S 12 8 4 0 22 41 74 135 245 CONTACT RESISTANCE MILLIOHM MAX. 16 3 1 0.5 0.2 POTENTIAL DROP (MILLIVOLTS) 49 42 26 23 21 **Maximum total current to be carried per connector in wire bundles as specified in MIL-W-5088. Contact resistance when tested to MIL-C-39029 will not exceed voltage drops listed in above table. Wire Range Sizes Insulation Resistance 100 26 AWG to 0 AWG ( a See contact selection pages 118 - 119 ) CB/CA: >1000 Megohm (CA-Bayonet) According to VG95319 Test 5.12 and VG95210 Part 32, Test condition B. For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com MECHANICAL Operating Temperature -55 to +125C (-67 to +257F) Neoprene Sealing Fully submersible to 1 bar (35 feet) when mated. Meets IP67, DIN 40 050, VG 95234. Wire Sealing Range The connector is designed for individual wire sealing. Sealing of an outer cable jacket on multiconductor cables must be accomplished with an appropriate endbell. Sealing is only guaranteed if wires according to MIL-W-5086 or within the listed ranges are used. CONTACT SIZE WIRE SIZE (MIL-W-5086) 16 16 12 INSULATION O.D. LIMIT MIN. (INCHES) MIN. (MM) MAX. (INCHES) MAX. (MM) 12 .122 3.1 .138 3.5 8 8 .220 5.6 .256 6.5 4 4 .335 8.5 .370 9.4 0 0 .452 11.5 .512 13.0 .087 2.2 .110 2.8 Mating Life 2,000 cycles minimum (commercial) 500 cycles minimum (to VG 95234) Salt Spray Meets VG 95234, Test 5.34 Heat +125C (+257F) for 1000 hours Chemical Resistance Tested unmated and mated according to VG 95234 for hydraulic fluid, lubricating oil, fuels, humidity,water, salt water, solvents and corrosion resistance. Vibration 200 m/s2 at 10 to 2,000 Hz. To VG 95234 Test 5.16. Shock 50g 11ms, three major axes. To VG 95234 Test 5.17. Contact Type Solder, crimp, PC, or thermocouple. Hard silver or gold plating. Number of Circuits 1 to 65 Contact Insertion From rear with simple hand tool. Removable, 5 cycles minimum. Contact Retention Pin and socket contacts are designed to resist severe vibration and repeated connection and disconnection. Contact retention and separation is tested according to VG 95319 Part 2. (Contact retention to test 5.4 with test force in mating direction. Separation force test 5.7 using required test gauge.) CONTACT SIZE RETENTION FORCE NEWTONS (LBS.) SEPARATION FORCE MIN. NEWTONS (LBS.) GAUGE AXIAL LOAD NEWTONS (LBS.) SEPARATION FORCE MIN. NEWTONS (LBS.) 16 35 (7.9) 1 (.22) G 1.56 44 (10) 1 12 55 (12.4) 1.5 (.34) G 2.36 67 (15) 2 (0.5) 8 80 (18.0) 3 (.67) G 3.58 89 (20) 3 (0.75) 4 90 (20.2) 4 (.90) G 5.69 89 (20) 4 (1) 0 95 (21.4) 8.5 (1.9) G 9.04 111 (25) 9 (2) Polarization ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS TECH SPECS (0.25) Key and keyway plus three point bayonet with optional rotational polarization. a See pages 109 - 117 Approvals/Specifications * VG 95234 bayonet coupling nut CROSS SECTION wave spring and washer (optional) bayonet roller bolt insulator for pin contacts bayonet ramp sealing ring ferrule pin contact individual wire sealing grommet socket contact endbell shell stainless steel stud (optional) insulator for socket contact shell For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 101 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS CREATE YOUR PAR T NUMBER USING THESE NINE STEPS 1 2 3 CB 6 E CONNECTOR SHELL STYLE TYPE 4 5 6 10SL-3 P LAYOUT CONTACT ENDBELLS CABLE (If omtting CLAMP/BOOT endbell, enter -) (If needed) 7 8 9 S POSITION (omit for normal) CONTACT TYPE PLATING STEP 1: SELECT CONNECTOR TYPE CB STEP 2: SELECT SHELL STYLE, PLUG OR RECEPTACLE PLUGS 6 Standard Mates with G6 Grounding Finger Barrel (EMI/RFI) RECEPTACLES 0 Wall Mount 1 Cable Mount 2 Box Mount 7 Jam Nut CB4 4 Rubber Covered CB4 W6 Wavespring CB4 V4 Low Cost, EZ-Grip (PVC) VW4 Low Cost, EZ-Grip (PVC) Wavespring 9 Thru Bulkhead V4 and VW4 = for shell sizes 10S, 12S, 14S, 16S, 18, 20, 22 and 24 102 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com a See "Endbells" on pages 129-131 for a description of each endbell. E R N U/D F T TP P Mates with Standard Clamp (MS) No Clamp (MS) Standard Extender Heat Shrink L 90 (MS) I X CT 8P endbell Right Angle Endbell Low Cost for Shielded for Unshielded Cable U - potted (preferred) D - uses grommets and ferrules Potting (MS) PME ST Conduit I p - Internal thread version X - External thread version Shielded Conduit Conduit p p p a see pages 332-333 Long Extender PG p Gland Seal NPT (I OR X) L Shielded Cable J PMA p M Low Cost Gland Seal p PME a see pages 332-333 STEP 4: CHOOSE CABLE CLAMPS (IF APPLICABLE) For Endbell Types: N U/D M For Endbell Types: L F T Heat Shrink Boot a See pages 326 - 331 C A MS-3057-C MS-3057-A STEP 5: CHOOSE LAYOUT P = Pin STEP 7: CHOOSE ROTATION Y S = Socket PS = Style 9 only STEP 8: CHOOSE CONTACT TYPE a See pages 109 - 116 X p STEP 6: CHOOSE CONTACT a See pages 104 - 117 W 9767 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS STEP 3: C HOOSE END BEL L S S = Solder C = Crimp* Z H = PC** 0 = Less contacts STEP 9: CHOOSE PLATING CONTACTS: Omit for silver contacts AU = Gold SHELLS Omit for standard*** A34 = Bright Nickel A232 = Black Zinc A239 = Black RoHS Cobalt (non-conductive, (Conductive, CB CB series only) series only) Cobalt (conductive, 500 hr Salt Spray A233 = Green Zinc CB series only) 500 hr Salt Spray A240 = Blue RoHS (Conductive, CB series only) * When using a "C" in part number, the connector is supplied with the standard size crimp contacts for its layout (part number marked with "G#" in crimp Contact Selection Chart on a pages 118 - 119 If reduced or enlarged crimp contacts are required, specify connector 0 (less contacts) and order contacts separately. ** Contact us for PC post diameters and lengths. Available for 16S, 16 and 12 size contacts. Contact us with NPT thread size, Sealtite conduit diameter or cable OD for D, NPT, ST, PG or endbell part number. ***CB = Olive drab chromate over cadmium. p For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 103 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY NUMBER OF CONTACTS Key t = CA/MS l = CB View from mating face of pin insulator *= most popular layouts (socket view is opposite) 1 C O N TAC T LAYOUT # OF CONTACTS SERIES SERVICE RATING 8S-1 1-#16 10S-2 1-#16 12S-4 1-#16 12-5 1-#12 14S-4 1-#16 16-12 1-#4 18-6 1-#4 18-7 1-#8 20-2 1-#0 22-7 1-#0 t t tl t l tl l tl tl tl A A D D D A D B D E 2 C O N TAC T S A A B A A B LAYOUT # OF CONTACTS SERIES SERVICE RATING B B A B A A B B 10SL-4* 2-#16 12S-3* 2-#16 14S-9* 2-#16 16S-4 2-#16 16-11 2-#12 18-3 2-#12 20-23 2-#8 tl tl tl tl tl A tl tl A A A D A D A B LAYOUT # OF CONTACTS SERIES SERVICE RATING B A B A B B A A B A 22-1 2-#8 22-8 2-#12 22-11 2-#16 24-9 2-#4 28-7 2-#4 32-5 2-#0 l tl t tl t tl D E B A D D 3 C O N TAC T S A C A C LAYOUT # OF CONTACTS SERIES SERVICE RATING C A B B A C C B A A 10SL-3* 3-#16 14S-1 3-#16 14S-7* 3-#16 16S-5 3-#16 16S-6 3-#16 tl tl tl tl tl A A A A A A C B C B B A C C A B 16-7 2-#16; 1-#8 16-10* 3-#12 18-5 1-#16; 2-#12 l tl tl A C A B B A B 18-21 3-#12 18-22 3-#16 l tl D D D A A C LAYOUT # OF CONTACTS SERIES SERVICE RATING B C A A A C B A C A C C B B B C C B B 20-3 3-#12 20-6 3-#16 20-19 3-#8 22-2 3-#8 22-6 1-#16; 2-#8 22-9 3-#12 22-21 2-#16; 1-#0 tl l tl tl t tl l D D A D D B A E 36-4 3-#0 t A D(A); A(B,C) 4 C O N TAC T S DA C B LAYOUT # OF CONTACTS SERIES SERVICE RATING 104 D A D A C B D B C A B C D A C B D D A C D C A A A B B C B D B C 12SA-10 4-#16 14S-2* 4-#16 16-9 2-#16; 2-#12 18-4* 4-#16 18-10* 4-#12 18-13 3-#12; 1-#8 20-4* 4-#12 20-24 2-#16; 2-#8 22-4 2-#12; 2-#8 tl tl tl tl tl tl tl tl tl I I A D A A D A A For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com Key t = CA/MS l = CB View from mating face of pin insulator *= most popular layouts (socket view is opposite) 4 C O N TAC T S A A AA C B D A D A D DD A AA D DD A AA C B C B C CC DD B BB AA C CC DD B BB AA CC BB CC BB B BB C D CC D DD A D A D DD A AA A AA CC C B C DD CC B AA BB BB DD D A D DD A AA C DD C CC B LAYOUT # OF CONTACTS SERIES SERVICE RATING CC B AA D DD AA B BB CC AA D B BB C DD BB C CC BB CC BB 22-10 4-#16 22-22* 4-#8 24-4 3-#16; 1-#0 24-22* 4-#8 32-17 4-#4 36-5 4-#0 tl tl l tl tl tl E A D D D A 5 C O N TAC T S A A E B A D CB EE B AA DD CC C B A BDB ECC AA DD EE BB CC AA DD EE LAYOUT 10SLA4 # OF CONTACTS 5-#20 tl SERIES SERVICE RATING A A D EE DDC B BCB E D CC C EE D DD AA BB EE CC BB CC BB B A EAA CC BB EE DD AA CC BB EE DD AA EE BB AA DD CC E E D EA E D BAA DC E D A EE C BAA DD A E A AA E EE D B C AA D CC C DD EE BB B B EE BAA CC BB CC DD DD 18-20 5-#16 20-14 3-#12; 2-#8 22-12 3-#16; 2-#8 tl tl tl l tl tl A A A A D 5 CO NTA CTS B D EE D DD E EE B BB AA F E E ED C C D DD C BB CC DD BB F B A EFD B CB F AA EEDDCC C CC DD CC LAYOUT 28-5 # OF CONTACTS 2-#16; 1-#12; 2-#4 tl SERIES SERVICE RATING D CC E E DE D DD DD 24-12 3-#12; 2-#4 tl tl A(A,D); D(E) C B C CC B E EE D F ABB A D F DD F F AA CC EE BB A AA B C B BB C CC FF EE AA FF BB AA EEDDCC A DD CC 20-17 1-#16; 5-#12 20-22 3-#16; 3-#8 tl tl tl tl tl tl I A I A A AA E EE CC DD E EE A AA FF B E CC BB B EE B BB C E A C CC B A A F A A F FF A AA A AA F B F FF C EE CC DD CC B B 20-8 4-#16; 2-#8 E C DA A CC EE FF D BB DD LAYOUT 22-5 # OF CONTACTS 4-#16; 2-#12 l SERIES SERVICE RATING D B D CC C BB DD EE F F AA AA FF CC BB 18-12 6-#16 F FF E BB DD DD F F A A BB E F A A E F AA EE FF B D C D D DC 14S-6* 6-#16 F B E EE A F A AA FFB EB CC EB D 32-1 3-#12; 2-#0 E(A); D(balance) E B EE BB D C F F AA D CC C DD EE CC 22-13 1-#16; 4-#12 E A F FF F E BB DD BB B B BB AA A AA B BB A AA E E A B C AA C CC D DD EE 6 C O N TAC T S A F FF CC CC 18-11* 5-#12 I E EE D EE DD CC A AA E A AA E C EEE B CC BB DD AA 16S-8* 5-#16 A AA F B BB 14S-5* 5-#16 A E EE D DD A B AA FF E EE BB C EE B BB C BB C CC D D DD C CC DD DD BB B AA E D DD D AA D DD F FF B AB AB FF D EE CC DD CC 22-15 1-#16; 5-#12 28-22 3-#16; 3-#4 36-3 3-#12; 3-#0 36-6 4-#4; 2-#0 tl tl tl tl A (A,B,C,E,F); E (D) D ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY NUMBER OF CONTACTS D A 7 C O N TAC T S F F A E G FAA AB FF B E GG GCBB E ED D CC C DD F FA A E E GGB B LAYOUT 14SA7 DD CC # OF CONTACTS 7#16 SERIES t l SERVICE RATING I F A E FF G AAAB F C E FG CB F C EED GGABB DD AA FF CC EE GG BB DD AA F A E FFGAAB E GGCBB ED DD CC FF AA EE GG BB EED GGC BBB FF CC AA DD EE GG BB E F A F FF G A AA E B A F FF G A AA E B DD A F FF A AA G B DD CC A AA G F FF E G B GG BB DF F CA A D C DD CC GG EE BB B CC 20-15* 7-#12 CC 22-28 7-#12 24-2 7-#12 24-10 7-#8 24-27 7-#16 tl tl tl tl tl tl tl I A DD CC A D D EE DD A tl E D(G); A(balance) A A AA H A G LAYOUT 18-8* # OF CONTACTS 7-#16; 1-#12 tl SERIES SERVICE RATING A A 20-7* 8-#16 tl A(C-F) D(balance) G FGG G F FEF E EE GG A BA AA B BB H C HH D CA C CA H D BB F F DD HH CC EE DD 22-18 8-#16 tl A(C-E) G F F FF E A G AA A GG B H B H CBB HH E D EE GG AC CA D C F F DD HH B B EE CC DD 22-23 8-#12 tl D(H); A(balance) G GG F A H A B AA B BB H HH A GG AC E D EE C C C BB FF HH D DD F FF E B BB D BB F FF DD DD C CC E EE G GG G GG H CC H HH AA G F D F FF D DD GG HH CC C C CC CC E EE GG BB HH FF FF EE AA G B BB C E D DD F B H HH A AA B G B A AHA B GG BB F H C E HD C F F AA C E D E GG D BB HH FF CC EE DD CC 28-10 3-#12; 2-#8; 2-#4 8 C O N TAC T S G A F HG B EFF G AA EE DHHC BB D D GCGC AA FF EE HH BB DD CC B BB C BB CC GG DD DD 18-9 5-#16; 2-#12 B G G F FG A A C D G GG C E DA A CC EE D F F DD BB GG EE CC A AA G E EE B BB C A F FF E A F E EE E G BB B EE GG D C F F AA D CC C DD EE GG B B B E G BB EE GG DF F CA A C D CC DD BB EE GG F DD CC 16S-1* 7-#16 A DD F DD E EE EE 24-6 8-#12 32-15 6-#12; 2-#0 36A35 4-#16; 4-#0 l tl l D (A,G,H); A(balance) D A For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 105 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY NUMBER OF CONTACTS Key t = CA/MS l = CB View from mating face of pin insulator *= most popular layouts (socket view is opposite) 9 C O N TAC T S A H G F LAYOUT # OF CONTACTS SERIES SERVICE RATING E F B J C D E A C G H A G I D F H B J E A H H F G B E D C A B I G C F D 20A9 9-#12 20-16 7-#16; 2-#12 20-18* 6-#16;3-#12 22-16 6-#16; 3-#12 l tl tl D(J),all others I A A B C J D E H A F J B E D C B A G LAYOUT # OF CONTACTS SERIES SERVICE RATING F E D C 22-27 8-#16; 1-#8 l t tl tl A D(A); A(balance) A D(J); A(balance) H G G I H H A G I B H I F 28-1 6-#12; 3-#8 28A16 5-#16; 4-#4 tl t tl A D(A,E,J); A(balance) A E J C J M H LAYOUT # OF CONTACTS SERIES SERVICE RATING B E G C L F B K F D C L D E B D E F G H K J 18-1* 10-#16 18-19 10-#16 tl tl A(B,C,F,G); I(balance) E G J H 28-19 6-#16; 4-#12 tl A(C,E,G,J,K,L); B(H,M); D(A,B) A 1 2 C O N TAC T S D E B A J H AC C D 11 CO NTA CTS K A C M K J 24-11* 6-#12; 3-#8 B L F E D A C B F E E 1 0 C O N TAC T S C D C D F A B B J 22-20 9-#16 9 CO NTA CT S A A H G 22-17 8-#16; 1-#12 M G L K H J J H F A N A A B C L C K D J H F B D G K E F H L F C M E B L N L F A K H B M J J A K G E C M E D D 20-33 11-#16 24-20 9-#16; 2-#12 28-14 11-#16 24-19 12-#16 24A24 12-#12 28-9 6-#16; 6-#12 28-51 12-#12 tl tl t tl tl tl l A D D A A 13 CO NTA CTS A K LAYOUT # OF CONTACTS SERIES SERVICE RATING D J A I K B H N L C G M D F E L J K A B L J C P M H D N G E F H P G C N F A H J G K G C L E E B B C D H D E F J I L G K N M 22-19* 14-#16 28-2 12-#16; 2-#12 28-20 4-#16; 10-#12 32-9 12-#16; 2-#4 l t tl tl tl tl A A D A A F F M N LAYOUT 28-17* # OF CONTACTS 15-#16 l SERIES SERVICE RATING A(A-L); B(R); D(M-P) D 1 6 C O N TAC T S E R P M F A I L K P D J D N 20-27* 14-#16 15 CO NTA CTS C A A J H B M 20-11 13-#16 I B D 1 4 C O N TAC T S B L C M E F G H K N A J D 106 G L D J P C G M S L B E K R K H N J A M B N P H G N H F Q K D E F B S P L G A C J C M D E O I C B K P H M D N G E F 24-5 16-#16 24-7* 14-#16; 2-#12 36-14 6-#16; 5-#12; 5-#8 36A70 5-#16; 11#4 t tl tl tl A A D - For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com Key t = CA/MS l = CB View from mating face of pin insulator 17 CO NTA CTS 18 C O N TAC T S A M T K J S R H G F T K J E D LAYOUT A B N P C M L A B N P C F S R H G F K E D H N S F P T B CE J M L A E D G R 1 9 C O N TAC T S B C L H G K U D J M L R ST J U K L M A T U S H V G BL M A PK C U N B N DT RJ F V S EH P R F G tl t l tl 2 0 CO NTA CTS 22 C O N TAC T S A A T H B L JM V U K A B C T L M N S V U Q P H D R Q P G F E G F E P V R W D S X I J EN J U A P KV F K B R G W CL L S H X D TI M M N U C N R LAYOUT # OF CONTACTS SERIES SERVICE RATING A T E F G H I 2 3 C O N TAC T S CD E A K B Q C I PR UV D A B GH J LM E F K N Q S T I P U WX A C BD G H L M J R T W X F M N L S J P A Y W K V N X B R Z V H U G S N M C L E V 32-6 16-#16; 2-#12; 3-#8; 2-#4 32-13 18-#16; 5-#12 tl tl tl l A A 26 CO NTA C T S N B C D F G H J L M N P Q R S T U V W X Y Z P M Z L Y K a S W H D I R X D V G S C U d J B T b X J A N W F f Z d 2 8 C O N TAC T S F L U V F G A G M a b E C H E D 2 7 C O N TAC T S E R D T U H C S Z J F B R Y W KD T A P X 28-11* 18-#16; 4-#12 24 CONTA CTS E A 28-16 20-#16 A A C D E 22-14* 19-#16 S K 14 T 15 16 24 13 23 28 12 22 27 Y 11 21 10 9 c 1 17 2 25 18 3 4 26 19 5 20 8 7 J T S H R G a Q 6 b d A K B U V P F L W e Z Y C M X D N E 24-28* 24-#16 28-12* 26-#16 36A46 27-#12 24A28 28-#16 28A63 9-#12; 19-#16 tl tl tl l l I A 30 CO NTA CTS A c d e T Y U Z K R X E J P K R X c L C B F C G N T 3 5 C O N TAC T S A H W b C G L S f P H X R d J Y j A D E S e K Z l T L a f m B F c M G N U V W b g k 32-8 24-#16; 6-#12 36-9 14-#16; 14-#12; 2-#8; 1-#4 28-15* 35-#16 tl tl tl A A 35 CO NTA CTS S R A T d Q P c N b L e g h J H h k d j e g f b W P J X R Y S L Z T M a V U E K N O F G H I A B C D 32-7* 28-#16; 7-#12 tl I (A,B,H,J); A (balance) 37 C O N TAC T S D W E F X Y Z K A c h C V f m j a M B U k A D I O V Y e B F a d A E J P W b D I O V a Z U M H N I 31 C O N TAC T S S M LAYOUT # OF CONTACTS SERIES SERVICE RATING J V 20A48 19-#16 K LAYOUT # OF CONTACTS SERIES SERVICE RATING T 36A16 18-#12 J LAYOUT # OF CONTACTS SERIES SERVICE RATING LM A U N B L MA K U N B P C J T V P C H S R D H S R D G F E G F E K NP 20-29* 17-#16 # OF CONTACTS SERIES SERVICE RATING K *= most popular layouts (socket view is opposite) ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY NUMBER OF CONTACTS G K S E A B L CD F G H J M N P R T U a g b n h V W c p j d r e k s X 36-15 35-#16 28-21* 37-#16 tl tl D(m); A(balance) f Z m A For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 107 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS 108 LAYOUTS BY NUMBER OF CONTACTS Key t = CA/MS l = CB 39 CO NTA CTS 7 16 30 23 6 14 29 13 LAYOUT # OF CONTACTS SERIES SERVICE RATING 12 E AB C D E F G H J K L M N P R S T U C 11 20 21 2 19 27 28 4 7 C O N TAC T S C 10 V W Y Z a b c d e f g h j k l m n p r s t u v w y 3 D 4 A B C D E F G H J K L M N P Q R S T U V W X e m f s Y g Z a h n p t u x y j v b q k w 36A98 8-#8; 31-#16 28A51 43-#16 32A47 47-#16 l tl tl I A 52 CO NTA CTS 54 CO NTA C T S c r l K O r a N W k X c u m C H J P R d f v n Y w p S g D Z q x E L K M T U h i y r z a V AA AB AC AG AD AE AF LAYOUT # OF CONTACTS SERIES SERVICE RATING F b j s C t S m K N X b g s AB T c n w AD A D B E G H J M L R O P U Va W Z Y e f h d j k p q r t u v x y z AA AC AE AF AG A B D E G F H J K L M N R P O S T U V a W X Y Z e c b f d g h j k n q r m p u s t v w x y AC z AB AA AH AE AD AF AG B J N S W X b f t 4 8 C ON TA C T S E g k u w v x y z p T N c W m f G I R a Z h j t s H P B N X Y g AA z G r y d w L P R V Z a e h p H j r t M O V C J W d E W L V e d p n m w D X e m T c b v k u AG AF AE AD AC AB AK AJ AH Y n q v z T a Z y G M N S g p u F L R f h w r U c b j s k x tl tl 6 1 C O N TAC T S 6 5 C ON TA C T S A 1 I B E K 36-10* 48-#16 K U D Q P t y A F f x K U A C H A 5 6 C O N TAC T S J z E 36-8 46-#16; 1-#12 A S u v x tl C k n s F Y c g A M T X b m D J O S s 36-7* 40-#16; 7-#12 A 5 5 C O N TAC T S B G M R e j n I V Z d h D F L P U Y d A H C B A F *= most popular layouts (socket view is opposite) 43 CO NTAC T S B 26 31 5 1 18 25 22 F 9 17 24 15 G A 8 H View from mating face of pin insulator H C B A P W G N D f V e AC p AK AD AR AW AL AS 2 4 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 36A34 52-#16 32A10 54-#16 32A55 55-#16 36A66 52-#16; 4-#12 32A69 20-#16; 41-#20 36A99 50-#20; 15-#16 tl tl l t l l A A A A A I For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com N Mating Face view of pin inserts W X Z Alternate Insert Position (Rotation) Y CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS CT CB VG TOTAL CONTACT SIZES 20 16 12 8 4 0 2 DEGREES OF ROTATION W X Y Z SERVICE RATING 8S-1 s 1 1 - - - - A 10S-2 s 1 1 - - - - A 10SL-3 s l 3 3 - - - - A 10SL-4 s l 2 2 - - - - A 10SL-51 s l 2 2 2 10SL-4 45 A=IR.; B=CON. 10SL-52 s l 2 2 2 10SL-4 45 A=CU; B=CON. 10SL-53 s l 2 2 2 10SL-4 45 A=AL.; B=CH. 10SL-54 s l 3 3 2 10SL-3 A=IR.; B=CON.; C=CU 10SL-55 s l 3 3 2 10SL-3 A=AL.; B=CH.; C=CU 10SL-56 s l 2 2 2 10SL-4 A=AL.; B=CH. 10SL-57 s l 2 2 2 10SL-4 A=CH.; B=CON. 10SL-58 s l 3 3 2 10SL-3 A=CH.; B=AL.; C=CU 10SL-59 s l 2 2 2 10SL-4 A=CH.; B=AL. 10SL-60 s l 2 2 2 10SL-4 A=IR.; B=CON. 10SL-61 s l 2 2 2 10SL-4 A=CU; B=CON. 10SL-62 s l 3 3 2 10SL-3 A=CU; B=AL.; C=IR. 10SL-63 s l 3 3 2 10SL-3 A, C=CON.; B=CH. 10SL-64 s l 3 3 2 10SL-3 A, C=CH.; B=AL. 10SL-A4 s l 5 12S-1 s l 2 5 CONTACT US FOR VALID ROTATIONS A 2 12S-3 100 A 12S-2 s l 2 2 12S-3 250 12S-3 s l 2 2 70 145 215 290 A 12S-4 s l 1 1 - - - - D 12S-51 s l 2 2 2 12S-3 315 A=CH.; B=AL. 12S-54 s l 2 2 2 12S-3 315 A = IR.; B=CON. 12S-55 s l 2 2 2 12S-3 45 A=CU; B=CON. 12S-56 s l 2 2 2 12S-3 A=AL.; B=CH. 12S-57 s l 2 2 2 12S-3 60 A=CH.; B=AL. 12S-58 s l 2 2 2 12S-3 120 A=IR.; B=CON. 12S-59 s l 2 2 2 12S-3 A=IR.; B=CON. 12S-60 s l 2 2 2 12S-3 A=CU; B=CON. 12S-61 s l 2 2 2 12S-3 A=CH.; B=CON. 12S-62 s l 2 2 2 12S-3 A=CH.; B=AL. 12SA10 s l 12-5 s A 14S-1 s l 3 14S-2 s l 4 CONTACT US FOR VALID ROTATIONS 1 1 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE I - - - - D 3 - - - - A 4 - 120 240 - I For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 109 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS 110 LAYOUTS BY SHELL SIZE N Mating Face view of pin inserts W X Z Alternate Insert Position (Rotation) Y CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS CT 14S-4 CB VG TOTAL CONTACT SIZES 20 16 12 8 4 0 2 DEGREES OF ROTATION W X Y Z SERVICE RATING l 1 1 - - - - D 14S-5 s l 5 5 - 110 - - I 14S-6 s l 6 6 - - - - I 14S-7 s l 3 3 90 180 270 - A 14S-9 s l 2 2 70 145 215 290 A 14S-10 s l 4 4 14S-2 100 I 14S-11 s l 4 4 14S-2 250 I 14S-12 s l 3 3 14S-1 100 A 14S-13 s l 3 3 14S-1 260 A 14S-14 s l 4 4 14S-2 100 I 14S-51 s l 2 2 2 14S-9 90 A=AL.; B=CH. 14S-52 s l 4 4 2 14S-2 45 A, B=CU; C=AL.; D=CH. 14S-53 s l 2 2 2 14S-9 90 A=IR.; B=CON. 14S-54 s l 6 6 2 14S-6 45 A, C, E=IR.; B, D, F=CON. 14S-55 s l 4 4 2 14S-2 45 A, C=IR.; B, D=CON. 14S-56 s l 4 4 2 14S-2 45 A=IR.; B=CON.; C, D=CU 14S-57 s l 4 4 2 14S-2 45 A, C=AL.; B, D=CH. 14S-58 s l 3 3 2 14S-7 45 A=AL.; B=CH.; C=CU 14S-59 s l 2 2 2 14S-9 90 A=CU; B=CON. 14S-60 s l 2 2 2 14S-9 A=AL.; B=CH. 14S-61 s l 6 6 2 14S-6 45 A=AL.; B=CH.; C=IR.; D=CON.; E, F=CU 14S-63 s l 6 6 2 14S-6 A, C= AL.; B, D=CH.; E=IR.; F=CON. 14S-64 s l 4 4 2 14S-2 A, C=CON.; B, D=CU 14S-65 s l 6 6 2 14S-6 A, C, E= CU; B, D, F=CON. 14S-67 s l 6 6 2 14S-6 A=AL.; B=CH.; BALANCE=CU 14S-68 s l 4 4 2 14S-2 45 A=CH.; B=CON.; C, D=CU 14S-69 s l 3 3 2 14S-7 A=CON.; B=CH.; C=CU 14S-70 s l 4 4 2 14S-2 A, D=CH.; B, C=AL. 14S-71 s l 4 4 2 14S-2 A, B, D=CU; C=CON. 14S-72 s l 2 2 2 14S-9 A=CON.; B=CU 14S-73 s l 4 4 2 14S-2 A, B=CU; C=AL.; D=CH. 14S-74 s l 4 4 2 14S-2 A, B=CH.; C, D=AL. 14S-75 s l 4 4 2 14S-2 A, B=CU; C, D=CON. 14S-76 s l 4 4 2 14S-2 A, C=AL.; B, D=CH. 14S-77 s l 4 4 2 14S-2 A, D=AL.; B, C=CH. For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS VG TOTAL CONTACT SIZES CT CB 20 16 14S-78 s l 2 2 14SA7 s l 7 7 12 1 8 4 0 DEGRESS OF ROTATION 2 W 2 14S-9 A=CH.; B=AL. 1 X Y - - - Z SERVICE RATING - A 14-3 s - - - - A 16S-1 s l 7 7 80 - - 280 A 16S-4 s l 2 2 35 110 250 325 D 16S-5 s l 3 3 70 145 215 290 A 16S-6 s l 3 3 90 180 270 - A 16S-8 s l 5 5 - 170 265 - A 16S-14 s l 3 3 16S-4 110 A 16S-15 s l 2 2 16S-5 100 D 16S-16 s l 2 2 16S-4 250 D 16S-17 s l 3 3 16S-5 250 A 16S-52 s l 2 2 2 16S-4 A=CH.; B= AL. 16S-54 s l 7 7 2 16S-1 A=AL.; B=CH.; BALANCE=CU 2 16S-1 A=CON.; BALANCE=CU 16S-55 s l 7 7 16SA18 s l 7 7 16S-1 100 A 16SA19 s l 7 7 16S-1 260 A 16SA20 s l 7 7 16S-1 110 A 16SA21 s l 7 7 16S-1 250 A 16-7 s l 3 2 16-9 s l 4 2 16-10 s l 16-11 s l 16-12 s l 1 16-13 s l 2 16-52 s l 2 16-53 s l 4 16-55 s l 16-56 s l 16-57 s 16-58 s 16-60 16-62 80 110 250 280 A 2 1 35 110 250 325 A 3 3 90 180 270 - A 2 2 35 110 250 325 A - - - - A 2 1 2 35 110 250 325 A=IR ; B CON 2 2 16-11 90 A=AL.; B=CH. 2 2 16-9 70 A=AL.; C=CH.; B, D=CU 3 3 2 16-10 45 A=AL.; B=CH.; C=CU 2 2 2 16-13 90 A=CON.; B=CU l 3 3 2 16-10 A=AL.; B=CU; C=CH. l 3 3 2 16-10 A=CON.; B, C=CU s l 2 2 2 16-13 A=AL.; B=CH. s l 2 2 2 16-11 A=CON.; B=CU 18-1 s l 10 18-3 s l 2 18-4 s l 4 4 18-5 s l 3 1 18-6 s l 1 18-7 s l 1 18-8 s l 8 7 1 5 2 4 2 10 2 2 1 1 18-9 s l 7 18-10 s l 4 18-11 s l 5 18-12 s l 6 18-13 s l 4 3 18-15 s l 4 4 5 6 1 2 70 145 215 290 A(B,C,F,G); I(all others) 35 110 250 325 D 35 110 250 325 D 80 110 250 280 D - - - - D - - - - B 70 - - 290 A 80 110 250 280 I - 120 240 - A - 170 265 - A 80 - - 280 A 80 110 250 280 A ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE 18-10 315 A, C=IR.; B, D=CON. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 111 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS 112 LAYOUTS BY SHELL SIZE N Mating Face view of pin inserts W X Z Alternate Insert Position (Rotation) Y CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS CT CB 18-17 s l 18-18 s l 18-19 s 18-20 s 18-21 VG TOTAL CONTACT SIZES 20 8 4 0 2 DEGREES OF ROTATION 12 7 5 2 18-9 100 I 7 5 2 18-9 250 I l 10 10 - 120 240 - A l 5 5 90 180 270 - A X Y Z l 3 70 145 215 290 D 18-22 s l 3 3 70 145 215 290 D 18-23 s l 10 10 18-1 100 A(B,C,F,G); I(all others) 18-24 s l 10 10 18-25 s l 2 18-26 s l 2 18-27 s l 3 1 18-28 s l 3 1 2 18-29 s 5 5 90 18-30 s 5 5 18-20 110 A 18-20 260 A l 3 W SERVICE RATING 16 18-31 s l 5 5 18-51 s l 6 6 18-52 s l 5 18-53 s l 6 18-54 s l 4 18-56 s l 10 18-57 s l 6 18-59 s l 6 6 18-60 s l 5 18-61 s l 6 6 18-62 s l 6 6 18-63 s l 4 18-65 s l 6 18-66 s l 10 18-67 s l 6 6 18-68 s l 5 18-69 s l 10 18-1 250 A(B,C,F,G); I(all others) 2 18-3 100 D 2 18-3 250 D 2 18-5 100 D 18-5 250 D 180 270 - 2 18-12 A=IR.;B,E=CON.;D=CU;C, F=DUMMY 5 2 18-11 A=IR.;B=CON.;C=CH.;D=AL.;E=DUMMY 2 18-12 A, D=IR.; B, E=CON.; C, F=DUMMY 4 2 18-15 A, C=AL.; B, D=CH. 10 2 18-1 45 A, C, E, G, I=IR.; B, D, F, H, J=CON. 6 2 18-12 45 A, C, E=AL.; B, D, F=CH. 6 5 2 18-12 45 A, C=IR.; B, E, F=CON.; D=CU 2 18-11 45 A, D=AL.; B, C,=CH.; E=CU 2 18-12 A, C=IR.; B, D=CON.; E=CH.; F=AL. 2 18-12 A, B, C=IR.; D, E, F=CON. 2 18-15 A, C=CON.; B, D=CU 6 2 18-12 A=IR.; B=CON.; BALANCE=CU 10 2 18-1 A, C, E, G, I=CU; B, D, F, H, J=CON. 2 18-12 A, C, E=CU; B, D, F=CON. 2 18-11 A, D=AL.; B, C=CH.; E=CU 2 18-1 A=AL.; B=CH.; BALANCE=CU 4 5 10 18-70 s l 5 5 2 18-11 A=IR.; B=CON.; C=CH.; D=AL.; E=CU 18-71 s l 4 4 2 18-15 A=CON.; BALANCE=CU 18-72 s l 4 4 2 18-15 D=CON.; BALANCE=CU 18-73 s l 7 5 2 2 18-9 A=AL.; D=CH.; BALANCE=CU 18-74 s l 6 6 2 18-12 A=CH.; B=AL.; D=IR.; E=CU; C, F=CON. A For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS VG TOTAL CT CB 18A31 s l 10 20-2 s l 1 CONTACT SIZES 20 16 12 8 4 0 2 DEGRESS OF ROTATION W X Y 18-1 110 10 1 SERVICE RATING Z A(B,C,F,G); I(all others) - - - - D 20-3 s l 3 3 70 145 215 290 D 20-4 s l 4 4 45 110 250 - D 20-6 s l 3 3 70 145 215 290 D 20-7 s l 8 8 80 110 250 280 A(B,C.F,G); I(all others) 20-8 s l 6 4 80 110 250 280 I 20-11 s l 13 13 - - - - I 20-14 s 5 3 80 110 250 280 A 20-15 s l 7 7 80 - - 280 A 20-16 s l 9 7 2 80 110 250 280 A 20-17 s l 6 1 5 90 180 270 - A 20-18 s l 9 6 3 35 110 250 325 A 20-19 s l 3 3 90 180 270 - A 20-22 s l 6 3 80 110 250 280 A 20-23 s l 2 2 35 110 250 325 A 20-24 s l 4 2 2 35 110 250 325 A 2 3 2 20-25 s l 13 13 20-11 100 20-27 s l 14 14 35 110 250 325 A I 20-29 s l 17 17 80 - - 280 A 20-30 s l 13 13 20-11 250 I 20-32 s l 8 8 20-7 260 A(B,C,F,G); I(all others) 20-33 s l 11 11 - - - 20-52 s l 4 2 20-4 315 A=IR.; B=CON.; C=CH.; D=AL. s l 8 8 2 20-7 45 A, B, G, H=IR.; C, D, E, F=CON. 20-60 s l 8 8 2 20-7 45 D=CH.; E=AL.; BALANCE=CU 20-61 s l 17 17 20-62 s l 7 20-64 s l 14 14 20-65 s l 14 14 20-67 s l 9 7 20-68 s l 8 20-69 s l 20-70 s l 20-71 s 20-74 20-75 4 A 280 20-56 2 20-29 45 A, B, M=CU; BALANCE=CON. 2 20-15 80 A, C, E=AL.; B, D, F=CH.; G=CU 2 20-27 A=AL.; C=CH.; BALANCE=CU 2 20-27 A, B, C, D, E, F, G=IR.; H, I, J, K, L, M, N=CON. 2 20-16 H=AL.; I=CH.; BALANCE=CU 8 2 20-7 A, B, G, H=CON.; C, D, E, F=CU 14 14 2 20-27 A, B, C, D, E, F, G=CU; H, I, J, K, L, M, N=CON. 17 17 2 20-29 A, C, E, G, J, L, N, R, T=IR.; B, D, F, H, K, M, P, S=CON. l 17 17 2 20-29 S=AL.; R=CH.; BALANCE=CU s l 17 17 s l 7 20-77 s l 9 7 20-80 s l 14 20-81 s l 14 20-82 s l 17 20A9 s l 9 20A16 s l 13 20A37 s l 4 7 2 2 20-29 A, C, E, G, J, L, N, R=IR.; B, D, F, H, K,M, P, S=CON.;T=CU 7 2 20-15 G=AL.; BALANCE=CH. 2 2 20-16 A=CON.; BALANCE=CU 14 2 20-27 A, C, E, G, I, K, M=CU; B, D, F, H, J, L, N=CON. 14 2 20-27 A, C, E, G, I, K, M=CU; B, D, F, H, J, L, N=AL. 17 2 20-29 A, C, E, G, J, L,N, R=AL.; B,D, F, H, K,M, P, S=CH.;T=CU 9 13 4 - 110 250 - ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE D(J); (all others) 20-11 182 I 20-4 250 D For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 113 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE W X Z Alternate Insert Position (Rotation) Y CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT MS SERIES CT 20A48 CB VG TOTAL 20 CONTACT SIZES 16 l 19 s l 2 22-2 s l 3 22-4 s l 4 22-5 s l 6 4 22-6 s 3 1 22-7 s l 1 22-8 s l 2 22-9 s l 3 22-10 s l 22-11 s 22-12 s 22-13 s 22-14 s 22-15 s 22-16 s 22-17 22-18 22-19 s 22-20 22-1 12 8 4 0 2 19 2 W DEGREES OF ROTATION SERVICE RATING X Y Z - 80 280 - I 35 110 250 325 D 3 70 145 215 290 D 2 35 110 250 325 A 35 110 250 325 D 80 110 250 280 D - - - - E 2 35 110 250 325 E 3 70 145 215 290 E 2 2 2 1 4 4 35 110 250 325 E 2 2 35 110 250 325 B 5 3 80 110 250 280 A 5 1 4 35 110 250 325 A(A-D); D(E) l 19 19 80 - - 280 A l 6 1 5 80 110 250 280 A(A-C, E, F); E(D) l 9 6 3 80 110 250 280 A s 9 8 1 80 110 250 280 D(A); A(all others) s 8 8 80 110 250 280 A(C-E); D(all others) l 14 14 80 110 250 280 A s l 9 9 35 110 250 325 A l 3 2 80 110 250 280 A 22-22 s l 4 - 110 250 - A 22-23 s l 8 35 - 250 - D(H); A(all others) 22-27 s l 9 80 - 250 280 D(J); A(all others) 80 - - 280 A 22-21 114 N Mating Face view of pin inserts l 2 1 4 8 8 1 22-28 s l 7 22-30 s l 19 19 22-14 100 A 22-31 s 2 2 22-11 100 B 22-32 s 6 4 22-5 260 D l 7 2 22-57 s l 19 19 2 22-14 45 A, C, E, G, J, L, N, R=IR.; B, D, F, H, K, M, P, S=CON.; T, U, V=CU 22-60 s l 19 19 2 22-14 45 U=AL.; N=CH.; BALANCE=CU 22-62 s l 8 2 22-23 60 A, B, F, G=AL.; C, D, E, H=CH. 22-68 s l 14 14 2 22-19 45 A, C, E, G, J, L, M=IR.; B, D, F, H, K, P, N=CON. 22-69 s l 14 14 2 22-19 45 A, C, E, G, J, L, M=CU; B, D, F, H, K, P, N=CON. 22-71 s l 19 19 2 22-14 V=AL.; U=CH.; BALANCE=CU 22-72 s l 6 4 2 22-5 B=AL.; E=CH.; BALANCE=CU 8 2 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS VG TOTAL CT CB 22-73 s l 6 22-74 s l 22-75 s 22-77 22-78 CONTACT SIZES 20 8 4 0 2 DEGRESS OF ROTATION 12 4 2 2 22-5 E=AL.; B=CH.; BALANCE=CU 8 8 2 22-23 A, C, E, G=IR.; B, D, F, H=CON. l 8 8 2 22-23 A=AL.; B, D, G, H=CU; C=CH.; E=IR.; F=CON. s l 14 14 2 22-19 B, D, F, H, J, K, M, P=CU; A, E, L=IR.; C, G, N=CON. s l 19 19 2 22-14 A, C, E, G, H, K, M, P, R, T=CON.; BALANCE=CU 22-79 s l 4 4 2 22-10 A, C,=CON.; B, D=CU 24-2 s l 7 24-5 s l 16 24-6 s 24-7 s l 16 7 14 X Y Z 80 - - 280 D 80 110 250 280 A 8 80 110 250 280 D(A,G,H); A(all others) 2 80 110 250 280 A 16 8 W SERVICE RATING 16 24-9 s l 2 24-10 s l 7 24-11 s l 9 6 24-12 s l 5 3 24-15 s l 16 16 24-19 s l 12 12 24-20 s l 11 9 24-22 s l 4 24-24 s l 16 24-25 s l 8 24-26 s l 8 24-27 s l 7 7 80 - - 280 E 24-28 s l 24 24 80 110 250 280 I 24-56 s l 11 9 24-57 s l 24 24 2 24-62 s l 24 24 2 24-63 s l 24 24 2 24-64 s l 16 16 2 24-5 A, B, C, D, E, F, G, H=IR.; J, K, L, M, N, P, R, S=CON. 24-68 s l 24 24 2 24-28 D=CON.; BALANCE=CU 24-79 2 16 24A24 s l 12 l 28 28 l 16 14 s 28-2 s 28-4 s 28-5 s 28-7 s 28-9 s 22B22 14 9 l l A 280 A 3 35 110 250 325 A 80 110 250 280 A 2 2 A - - - - A 80 110 250 280 D 45 110 250 - D 24-5 250 A 8 24-6 100 D(A,G,H); A(all others) 8 24-6 250 D(A,G,H); A(all others) 2 2 5 l 28-1 325 - 4 s s 250 - 16 24-81 24A35 110 80 24-5 100 5 24A28 35 7 24-20 45 E=AL.; F=CH.; BALANCE=CU 24-28 45 A, C, J, V, Y, W, K, E, H, U, S, M=CH.; BALANCE=AL. 24-28 A, C, E, G=IR.; B, D, F, H=CON.;R, T=CH.; S, U=AL.; BALANCE=CU 24-28 A, C, E, G, J, L, K, N, S, U, W, Y=CU; B, D, F, H, Q, R, M, P, T, V, X, Z=CON. - 2 2 - - - CONTACT FOR VALID ROTATIONS 2 24-7 100 65 3 A 24-7 A, C, E, G, I, K, M, N, P=CU; B, D, F, H, J, L, O=CON. 12 6 146 235 - A I A 80 110 250 280 D(A, E, J); A(all others) 14 12 2 35 110 250 325 D 9 7 2 80 110 250 280 E(G,P, S); D(all others) 5 2 1 2 35 110 250 325 D 2 35 110 250 325 D 2 l 12 l 4 6 6 4 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE 80 110 250 280 D - 110 250 - A For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 115 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE W X Z Alternate Insert Position (Rotation) Y CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT MS SERIES VG TOTAL 20 CONTACT SIZES CT CB 16 28-10 s l 7 28-11 s l 22 18 28-12 s l 26 28-13 s l 28-14 s 28-15 s 28-16 s 28-17 s 28-19 s 28-20 12 8 4 3 2 2 0 2 SERVICE RATING Y Z 80 110 250 280 D(G); A(all others) 80 110 250 280 A 26 90 180 270 - A 26 26 28-12 100 11 11 80 110 250 280 D l 35 35 80 110 250 280 A l 20 20 80 110 250 280 A 15 15 80 110 250 280 A(A-L); B(R); D(M-P) l 10 6 4 80 110 250 280 A(C, E, G, J, K, L); B(H, M); D(A, B) s l 14 4 10 80 110 250 280 A 28-21 s l 37 37 80 110 250 280 A 28-22 s l 6 3 70 145 215 290 D 28-51 s l 12 80 135 195 - A 28-53 s l 22 18 4 2 28-11 45 J, L=AL.; K, M=CH.; BALANCE=CU 28-58 s l 14 4 10 2 28-20 45 A, C, E, G, K, M=AL.; B, D, F, H, L, N=CH.; J, P=CU 28-59 s 17 10 7 4 3 12 W DEGREES OF ROTATION X - A - - - A 28-21 45 A, C, J, Z, M, R, N, A, K, F, H, X, K, H, T, M, N, D=IR.; BALANCE=CON. 28-20 45 A, C, E, G, J=AL.; B, D, F, H, P=CH.; BALANCE=CU 28-15 A, D=AL.; B, J=CH.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z=CON.; BALANCE=CU 28-12 A, C, E, G, J, L, N, R, T, V=IR.; X, Z=AL.; B, D, F, H, K, M, P, S, U, W=CON.; Y, A=CH.; B, D=CU 28-61 s l 37 37 28-63 s l 14 4 28-64 s l 35 35 2 28-65 s l 26 26 2 28-67 s l 20 20 2 28-16 U=CON.; BALANCE=CU 28-68 s l 35 35 2 28-15 45 T=AL.; U=CH.; BALANCE=CU 28-69 s l 22 18 4 2 28-11 G=AL.; R=CH.; BALANCE=CU 28-70 s l 22 18 4 2 28-11 A=AL.; B=CH.; BALANCE=CU 28-77 s l 22 18 4 2 28-11 J=CON.; BALANCE=CU 28-81 s l 37 37 2 28-21 A, D, S, Z, N, S=IR.; B, J, K, F, G, R=CON.; G, L, P, B, E, J=AL.; F, H, T, X, H, K=CH.; BALANCE=CU 28A16 s l 9 5 28A51 s l 43 43 l 28 19 l 5 28A63 116 N Mating Face view of pin inserts 32-1 s 32-2 s 5 2 10 2 4 9 3 2 2 3 CONTACT US FOR VALID ROTATION A(E); I(all others) CONTACT US FOR VALID ROTATION A - 110 260 - A 80 110 250 280 E(A); D(all others) 70 145 215 290 E For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT METALLURGY KEY: ALUMEL (AL.) CHROMEL (CH.) CONSTANTAN (CON.) COPPER (CU) IRON (IR.) THERMOCOUPLE (2) LAYOUT SERIES MS VG TOTAL CONTACT SIZES CT CB 20 16 12 32-5 s l 2 32-6 s l 23 16 2 32-7 s l 35 28 32-8 s l 30 24 8 4 0 2 DEGRESS OF ROTATION SERVICE RATING W X Y Z 35 110 250 325 D 80 110 250 280 A 7 80 125 235 280 I(A,B,H,J); A(all others) 6 80 125 235 280 A 80 110 250 280 D 80 110 250 280 D 35 110 250 280 D 45 110 250 - D 2 3 2 32-9 s l 14 12 32-13 s l 23 18 32-15 s l 8 32-17 s l 4 32-19 s l 5 32-20 s l 23 16 2 32-51 s l 30 24 6 2 32-8 90 M=CH.; N= AL.; BALANCE=CU 32-55 s l 30 24 6 2 32-8 125 M, N=CH.; O, P=AL.; BALANCE=CU 32A10 s l 54 54 32A29 s l 23 16 32A30 s l 5 32A47 2 5 6 2 4 3 2 2 3 3 3 2 32-1 260 E(A); D(all others) 32-6 260 A CONTACT US FOR VALID ROTATION A 2 32-6 250 A 2 32-1 100 E(A); D(all others) l 47 47 CONTACT US FOR VALID ROTATION 32A55 l 55 55 80 110 250 280 A 32A69 l 61 20 - 110 250 - I l 6 3 70 145 215 290 D 3 70 145 215 290 A(B,C); D(A) 4 45 120 240 - A 2 35 110 250 325 A s 41 36-3 s 36-4 s 36-5 s l 4 36-6 s l 6 36-7 s l 47 40 7 80 110 250 280 A 36-8 s l 47 46 1 80 110 250 280 A 36-9 s l 31 14 14 80 125 235 280 A 36-10 s l 48 48 80 125 235 280 A 36-11 s l 48 48 36-10 100 A 36-12 s l 48 48 36-10 250 A 36-14 s l 16 6 36-15 s l 35 35 36-16 s l 47 40 36-17 s l 47 40 7 36-7 250 A 36-18 s l 31 14 14 2 1 36-9 100 A 36-21 s l 31 14 14 2 1 36-9 260 A 36-53 s l 47 40 7 36A34 s l 52 52 36A35 s l 8 4 36A46 s l 27 36A98 s l 39 l 65 36A99 36A70 s 3 A 3 16 4 5 2 1 5 7 50 2 4 8 15 5 180 270 - D 60 125 245 305 D(m); A(all others) 36-7 100 27 31 90 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS LAYOUTS BY SHELL SIZE 11 36-7 45 U, V, W=AL.; X, Y, Z=CH.; BALANCE=CU CONTACT US FOR VALID ROTATION A CONTACT US FOR VALID ROTATION A CONTACT US FOR VALID ROTATION A CONTACT US FOR VALID ROTATION I CONTACT US FOR VALID ROTATION I - - - - I For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 117 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS CRIMP CONTACTS CONTACT SIZE CONTACT SIZE 16S CB CRIMP PINS CB CRIMP SOCKETS PART NUMBER PART NUMBER WIRE GAUGE (AWG) SILVER GOLD 16-18* CB16S-16P* CB16S-16PG* 20-22 CB16S-20P 22-26 WIRE STRIP LENGTHS SILVER GOLD - CB16S-16S* CB16S-16SG* - CB16S-20PG G5 CB16S-20S CB16S-20SG G5 CB16S-22P CB16S-22PG G6 CB16S-22S CB16S-22SG G6 12-14 CB16-12P CB16-12PG G13 CB16-12S CB16-12SG G13 14-16 CB16-14P CB16-14PG G12 CB16-14S CB16-14SG G12 16-18* CB16-16P* CB16-16PG* - CB16-16S* CB16-16SG* - 20-22 CB16-20P CB16-20PG G9 CB16-20S CB16-20SG G9 22-26 CB16-22P CB16-22PG G10 CB16-22S CB16-22SG G10 12-14* CB12-12P* CB12-12PG* - CB12-12S* CB12-12SG* - 16-18 CB12-16P CB12-16PG G16 CB12-16S CB12-16SG G16 8-10* CB8-8P* - - CB8-8S* - - 10 CB8-10P - G42 CB8-10S - G42 12-14 CB8-12P - G40 CB8-12S - G40 4* CB4-4P* - - CB4-4S* - - 6 CB4-6P - G44 CB4-6S - G44 0* CB0-0P* - - CB0-0S* - - 2 CB0-2P - G48 CB0-2S - G48 4 CB0-4P - G47 CB0-4S - G47 .245 (6.2) 16 12 8 .465 (11.8) 4 0 .540 (13.7) Part Numbers marked with * are the standard for that contact size All dimensions are shown in inches (millimeters in parentheses) 118 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com Insertion tools SEL NO. RA SE I T O 400BHD Shown WIRE RANGE CONTACT SIZE 16S INSULATION INSULATION O.D. MIN O.D. MAX .089 (2.2) .110 (2.8) ACCESSORIES WIRE HOLE FILLERS HOLE FILLER COLOR 225-0017-000 BLUE TOOLS HAND HAND USE LOCATOR CRIMP TOOL COLOR TOOL TURRET AF8 TH452 POWER POWER INSERTION/ CRIMP CRIMP EXTRACTION TOOL LOCATOR TOOL .089 (2.2) .110 (2.8) 225-0017-000 BLUE 12 .122 (3.1) .138 (3.5) 225-0018-000 YELLOW 8 .220 (5.6) .256 (6.5) MS27488-8-3 4 .335 (8.5) .370 (9.4) MS27488-4-3 0 .452 (11.5) .512 (13.0) MS27488-0-3 YELLOW AF8 INSERTION GUIDE PINS BLUE/GREENt WA27F 16 Extraction tool TH452 GREEN/REDt USE HAND TOOL TURRET WITH POWER TOOL CIT-F80-16* CET-F80-16 226-1017-000 CIT-F80-12* CET-F80-12 226-1018-000 AF8 TH452 RED RED - - - CCH8-KIT CIT-8* CET-8 - BLUE - - - 400BHD CCH4-KIT CIT-4* CET-4 - - - - CCH0-KIT CIT-0* CET-0 - ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS CRIMP CONTACTS *Insertion Tool Extraction Tool Pin t Socket All dimensions are shown in inches (millimeters in parentheses) CRIMP KITS ARE AVAILABLE FOR 16S & 16 SIZE CONTACTS - CAB16KIT. KIT INCLUDES * Crimp tool * Locator * Insertion tool * * * * Insertion guide pins Extraction tool Assembly instructions Rugged case For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 119 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS COMPONENTS RECEPTACLE PLUG O-RING BARREL/SHELL INSERT/ INSULATOR CONTACTS WAVE SPRING AND SKID WASHER (OPTIONAL) COUPLING NUT INDIVIDUAL WIRE SEALING GROMMET FERRULE/SLEEVE COMPRESSION RING ENDBELL/ BACKSHELL/ CABLE CLAMP & BUSHING 120 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CB 2 STYLES SHELL SIZE M +.016(0.40) IN MM N -.006(0.15) IN MM P (MAX.) IN MM R .004(0.10) S +.016(0.40) IN MM L .012(0.30) T IN MM IN KK (MAX.) 10SL 0.717 (18.2) 0.717 (18.2) 0.11 (2.8) 0.717 (18.2) MM IN 1 (25.4) 0.126 (3.2) 0.972 (24.7) MM 0.638 IN (16.2) MM 12S 0.717 (18.2) 0.843 (21.4) 0.126 (3.2) 0.811 (20.6) 1.102 (28.0) 0.126 (3.2) 0.972 (24.7) 0.638 (16.2) 14S 0.717 (18.2) 0.969 (24.6) 0.126 (3.2) 0.906 (23.0) 1.181 (30.0) 0.126 (3.2) 0.972 (24.7) 0.756 (19.2) 16S 0.717 (18.2) 1.079 (27.4) 0.126 (3.2) 0.969 (24.6) 1.280 (32.5) 0.126 (3.2) 0.972 (24.7) 0.882 (22.4) 16 0.846 (21.5) 1.079 (27.4) 0.126 (3.2) 0.969 (24.6) 1.280 (32.5) 0.126 (3.2) 1.331 (33.8) 0.882 (22.4) 18 0.907 (23.1) 1.213 (30.8) 0.157 (4.0) 1.063 (27.0) 1.378 (35.0) 0.126 (3.2) 1.331 (33.8) 1.008 (25.6) 20 0.907 (23.1) 1.346 (34.2) 0.157 (4.0) 1.157 (29.4) 1.496 (38.0) 0.126 (3.2) 1.331 (33.8) 1.142 (29.0) 22 0.907 (23.1) 1.472 (37.4) 0.157 (4.0) 1.252 (31.8) 1.614 (41.0) 0.126 (3.2) 1.331 (33.8) 1.268 (32.2) 24 0.907 (23.1) 1.610 (40.9) 0.157 (4.0) 1.374 (34.9) 1.752 (44.5) 0.146 (3.7) 1.331 (33.8) 1.390 (35.3) 28 0.947 (24.1) 1.839 (46.7) 0.157 (4.0) 1.563 (39.7) 2.000 (50.8) 0.146 (3.7) 1.331 (33.8) 1.630 (41.4) 32 0.947 (24.1) 2.102 (53.4) 0.157 (4.0) 1.752 (44.5) 2.244 (57.0) 0.169 (4.3) 1.331 (33.8) 1.882 (47.8) 36 0.947 (24.1) 2.346 (59.6) 0.157 (4.0) 1.937 (49.2) 2.500 (63.5) 0.169 (4.3) 1.331 (33.8) 2.130 (54.1) CB 0 STYLES ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS B1 L1 M +.016(0.40) N -.006(0.15) P (MAX.) IN MM IN MM IN 10SL 0.717 (18.2) 0.717 (18.2) 12S 0.717 (18.2) 0.843 (21.4) 14S 0.717 (18.2) 0.969 16S 0.717 (18.2) 16 0.846 18 L1 .012(.30) R .006(0.10) S .016(0.40) MM IN MM IN MM IN MM IN MM 0.110 (2.8) 0.717 (18.2) 1.000 (25.4) 0.126 (3.2) 1.276 (32.4) 9/16-24UNEF 0.126 (3.2) 0.811 (20.6) 1.102 (28.0) 0.126 (3.2) 1.276 (32.4) 5/8-24UNEF (24.6) 0.126 (3.2) 0.906 (23.0) 1.181 (30.0) 0.126 (3.2) 1.276 (32.4) 3/4-20UNEF 1.079 (27.4) 0.126 (3.2) 0.969 (24.6) 1.280 (32.5) 0.126 (3.2) 1.276 (32.4) 7/8-20UNEF (21.5) 1.079 (27.4) 0.126 (3.2) 0.969 (24.6) 1.280 (32.5) 0.126 (3.2) 1.575 (40.0) 7/8-20UNEF 0.907 (23.1) 1.213 (30.8) 0.157 (4.0) 1.063 (27.0) 1.378 (35.0) 0.126 (3.2) 1.634 (41.5) 1-20UNEF 20 0.907 (23.1) 1.346 (34.2) 0.157 (4.0) 1.157 (29.4) 1.496 (38.0) 0.126 (3.2) 1.634 (41.5) 1-1/8-18UNEF 22 0.907 (23.1) 1.472 (37.4) 0.157 (4.0) 1.252 (31.8) 1.614 (41.0) 0.126 (3.2) 1.634 (41.5) 1-1/4-18UNEF 24 0.907 (23.1) 1.610 (40.9) 0.157 (4.0) 1.374 (34.9) 1.752 (44.5) 0.146 (3.7) 1.634 (41.5) 1-3/8-18UNEF 28 0.947 (24.1) 1.839 (46.7) 0.157 (4.0) 1.563 (39.7) 2.000 (50.8) 0.146 (3.7) 1.673 (42.5) 1-5/8-18UNEF 32 0.947 (24.1) 2.102 (53.4) 0.157 (4.0) 1.752 (44.5) 2.244 (57.0) 0.169 (4.3) 1.673 (42.5) 1-7/8-16UN 36 0.947 (24.1) 2.346 (59.6) 0.157 (4.0) 1.937 (49.2) 2.500 (63.5) 0.169 (4.3) 1.673 (42.5) 2-1/8-16UN SHELL SIZE T B1 THREAD 2A For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 121 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS CB 0 ENDBELL STYLES B2 xx 2 KK 3 L2 E R L 2 MAX SHELL SIZE XX 2 MAX XX 2 MIN L4 L3 L 3 MAX IN F KK P L4 MAX L 5 MAX B2 THREAD 2A IN MM IN MM IN MM MM IN MM IN MM IN MM 10SL 2.244 (57.0) 0.256 (6.5) 0.140 (3.6) CT R1.969 EB (50.0) 0.378 (9.6) 2.047 (52.0) 5/8-24UNEF 1.531 (38.9) 12S 2.244 (57.0) 0.256 (6.5) 0.140 (3.6) 2.047 (52.0) 0.406 (10.3) 2.047 (52.0) 5/8-24UNEF 1.531 (38.9) 14S 2.323 (59.0) 0.354 (9.0) 0.195 (5.0) 2.047 (52.0) 0.488 (12.4) 2.047 (52.0) 3/4-20UNEF 1.531 (38.9) 16S 2.362 (60.0) 0.433 (11.0) 0.255 (6.5) 2.283 (58.0) 0.606 (15.4) 2.323 (59.0) 7/8-20UNEF 1.531 (38.9) 16 2.677 (68.0) 0.433 (11.0) 0.255 (6.5) 2.283 (58.0) 0.606 (15.4) 2.323 (59.0) 7/8-20UNEF 1.968 (50.0) 18 2.835 (72.0) 0.559 (14.2) 0.285 (7.2) 2.559 (65.0) 0.724 (18.4) 2.480 (63.0) 1-20UNEF 1.968 (50.0) 20 2.835 (72.0) 0.622 (15.8) 0.350 (8.9) 2.559 (65.0) 0.866 (22.0) 2.480 (63.0) 1-3/16-18UNEF 2.188 (55.6) 22 2.835 (72.0) 0.622 (15.8) 0.350 (8.9) 2.559 (65.0) 0.972 (24.7) 2.598 (66.0) 1-3/16-18UNEF 2.188 (55.6) 24 3.071 (78.0) 0.843 (21.4) 0.468 (11.9) 2.638 (67.0) 1.087 (27.6) 2.717 (69.0) 1-7/16-18UNEF 2.188 (55.6) 28 3.110 (79.0) 0.843 (21.4) 0.468 (11.9) 2.638 (67.0) 1.244 (31.6) 2.756 (70.0) 1-7/16-18UNEF 2.188 (55.6) 32 3.071 (78.0) 1.051 (26.7) 0.664 (16.9) 2.638 (67.0) 1.516 (38.5) 2.795 (71.0) 1-3/4-18NS 2.188 (55.6) 36 3.071 (78.0) 1.248 (31.7) 0.694 (17.6) 2.638 (67.0) 1.752 (44.5) 2.874 (73.0) 2-18NS 2.188 (55.6) Z 3 BB3 JJ3 Z 2 BB2 JJ2 CT E EB N M K2 K3 L3 L2 SHELL SIZE L 2 MAX IN MM K 2 MAX IN MM Z 2 MIN IN MM BB 2 MAX IN MM JJ 2 .008(0.20) IN MM L 3 MAX IN MM K 3 MAX IN MM Z 3 MIN IN MM BB 3 MAX IN MM JJ 3 .008(0.20) IN MM 10SL 2.244 (57.0) 0.461 (11.7) 0.303 (7.7) 0.524 (13.3) 0.610 (15.5) 2.165 (55.0) 0.669 (17.0) 0.303 (7.7) 0.642 (16.3) 0.728 (18.5) 12S 2.244 (57.0) 0.461 (11.7) 0.311 (7.9) 0.524 (13.3) 0.610 (15.5) 2.283 (58.0) 0.669 (17.0) 0.366 (9.3) 0.669 (17.0) 0.787 (20.0) 14S 2.244 (57.0) 0.461 (11.7) 0.417 (10.6) 0.669 (17.0) 0.752 (19.1) 2.283 (58.0) 0.669 (17.0) 0.417 (10.6) 0.787 (20.0) 0.866 (22.0) 16S 2.244 (57.0) 0.461 (11.7) 0.531 (13.5) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.531 (13.5) 0.906 (23.0) 0.984 (25.0) 16 2.480 (63.0) 0.453 (11.5) 0.531 (13.5) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.531 (13.5) 0.906 (23.0) 0.984 (25.0) 18 2.559 (65.0) 0.453 (11.5) 0.575 (14.6) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.575 (14.6) 0.965 (24.5) 1.102 (28.0) 20 2.677 (68.0) 0.500 (12.7) 0.736 (18.7) 1.031 (26.2) 1.165 (29.6) 2.756 (70.0) 0.709 (18.0) 0.728 (18.5) 1.122 (28.5) 1.260 (32.0) 22 2.677 (68.0) 0.500 (12.7) 0.819 (20.8) 1.031 (26.2) 1.165 (29.6) 2.756 (70.0) 0.709 (18.0) 0.819 (20.8) 1.201 (30.5) 1.339 (34.0) 24 2.756 (70.0) 0.500 (12.7) 0.969 (24.6) 1.358 (34.5) 1.488 (37.8) 2.756 (70.0) 0.709 (18.0) 0.969 (24.6) 1.358 (34.5) 1.496 (38.0) 28 2.795 (71.0) 0.500 (12.7) 1.063 (27.0) 1.358 (34.5) 1.488 (37.8) 2.756 (70.0) 0.709 (18.0) 1.063 (27.0) 1.476 (37.5) 1.614 (41.0) 32 2.913 (74.0) 0.598 (15.2) 1.311 (33.3) 1.717 (43.6) 1.882 (47.8) 2.953 (75.0) 0.709 (18.0) 1.311 (33.3) 1.732 (44.0) 1.890 (48.0) 36 2.913 (74.0) 0.598 (15.2) 1.516 (38.5) 1.717 (43.6) 1.882 (47.8) 3.346 (85.0) 0.709 (18.0) 1.516 (38.5) 2.008 (51.0) 2.165 (55.0) CB Nendbell.eps 122 L5 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CB 1 STYLES B1 L1 M .016(0.40) N -.006(0.15) P .008(0.20) IN MM IN MM IN MM IN MM IN MM IN MM 10SL 0.654 (16.6) 0.717 (18.2) 0.110 (2.8) 0.811 (20.6) 0.992 (25.2) 1.276 (32.4) 9/16-24UNEF 12S 0.654 (16.6) 0.843 (21.4) 0.126 (3.2) 0.929 (23.6) 1.094 (27.8) 1.276 (32.4) 5/8-24UNEF 14S 0.654 (16.6) 0.969 (24.6) 0.126 (3.2) 1.000 (25.4) 1.173 (29.8) 1.276 (32.4) 3/4-20UNEF 16S 0.654 (16.6) 1.079 (27.4) 0.126 (3.2) 1.126 (28.6) 1.272 (32.3) 1.276 (32.4) 7/8-20UNEF 16 0.941 (23.9) 1.079 (27.4) 0.126 (3.2) 1.126 (28.6) 1.272 (32.3) 1.575 (40.0) 7/8-20UNEF 18 0.941 (23.9) 1.213 (30.8) 0.157 (4.0) 1.248 (31.7) 1.370 (34.8) 1.634 (41.5) 1-20UNEF 20 0.941 (23.9) 1.346 (34.2) 0.157 (4.0) 1.374 (34.9) 1.488 (37.8) 1.634 (41.5) 1-1/8-18UNEF 22 0.941 (23.9) 1.472 (37.4) 0.157 (4.0) 1.500 (38.1) 1.618 (41.1) 1.634 (41.5) 1-1/4-18UNEF 24 0.941 (23.9) 1.610 (40.9) 0.157 (4.0) 1.626 (41.3) 1.756 (44.6) 1.634 (41.5) 1-3/8-18UNEF 28 0.941 (23.9) 1.839 (46.7) 0.157 (4.0) 1.874 (47.6) 2.004 (50.9) 1.673 (42.5) 1-5/8-18UNEF 32 0.941 (23.9) 2.102 (53.4) 0.157 (4.0) 2.126 (54.0) 2.248 (57.1) 1.673 (42.5) 1-7/8-16UN 36 0.941 (23.9) 2.346 (59.6) 0.157 (4.0) 2.386 (60.6) 2.504 (63.6) 1.673 (42.5) 2-1/8-16UN SHELL SIZE Q MAX S L1 B 1 THREAD 2A ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS B2 xx 2 KK 3 L2 E SHELL SIZE 10SL R L 2 MAX XX 2 MAX XX2 MIN IN MM IN MM IN MM 2.244 (57.0) 0.256 (6.5) 0.140 (3.6) L4 L3 F L 3 MAX IN KK 3 L5 P L 4 MAX B 2 THREAD 2A L 5 MAX MM IN MM IN MM IN MM CT R EB1.969 (50.0) 0.378 (9.6) 2.047 (52.0) 5/8-24UNEF 1.531 (38.9) 12S 2.244 (57.0) 0.256 (6.5) 0.140 (3.6) 2.047 (52.0) 0.406 (10.3) 2.047 (52.0) 5/8-24UNEF 1.531 (38.9) 14S 2.323 (59.0) 0.354 (9.0) 0.195 (5.0) 2.047 (52.0) 0.488 (12.4) 2.047 (52.0) 3/4-20UNEF 1.531 (38.9) 16S 2.362 (60.0) 0.433 (11.0) 0.255 (6.5) 2.283 (58.0) 0.606 (15.4) 2.323 (59.0) 7/8-20UNEF 1.531 (38.9) 16 2.677 (68.0) 0.433 (11.0) 0.255 (6.5) 2.283 (58.0) 0.606 (15.4) 2.323 (59.0) 7/8-20UNEF 1.968 (50.0) 18 2.835 (72.0) 0.559 (14.2) 0.285 (7.2) 2.559 (65.0) 0.724 (18.4) 2.480 (63.0) 1-20UNEF 1.968 (50.0) 20 2.835 (72.0) 0.622 (15.8) 0.350 (8.9) 2.559 (65.0) 0.866 (22.0) 2.480 (63.0) 1-3/16-18UNEF 2.188 (55.6) (55.6) 22 2.835 (72.0) 0.622 (15.8) 0.350 (8.9) 2.559 (65.0) 0.972 (24.7) 2.598 (66.0) 1-3/16-18UNEF 2.188 24 3.071 (78.0) 0.843 (21.4) 0.468 (11.9) 2.638 (67.0) 1.087 (27.6) 2.717 (69.0) 1-7/16-18UNEF 2.188 (55.6) 28 3.110 (79.0) 0.843 (21.4) 0.468 (11.9) 2.638 (67.0) 1.244 (31.6) 2.756 (70.0) 1-7/16-18UNEF 2.188 (55.6) 32 3.071 (78.0) 1.051 (26.7) 0.664 (16.9) 2.638 (67.0) 1.516 (38.5) 2.795 (71.0) 1-3/4-18NS 2.188 (55.6) 36 3.071 (78.0) 1.248 (31.7) 0.694 (17.6) 2.638 (67.0) 1.752 (44.5) 2.874 (73.0) 2-18NS 2.188 (55.6) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 123 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS CB Nendbell.eps DIMENSIONS CB 1 ENDBELL STYLES (CONTINUED) Z 3 BB3 JJ3 Z 2 BB2 JJ2 N M K2 K3 L3 L2 L 2 MAX SHELL SIZE IN K 2 MAX MM IN Z 2 MIN MM IN MM BB 2 MAX IN MM JJ 2 .008(0.20) IN MM L 3 MAX K 3 MAX Z 3 MIN JJ 3 .008(0.20) BB 3 MAX IN MM IN MM IN MM IN MM IN MM 10SL 2.244 (57.0) 0.461 (11.7) 0.303 (7.7) 0.524 (13.3) 0.610 (15.5) 2.165 (55.0) 0.669 (17.0) 0.303 (7.7) 0.642 (16.3) 0.728 (18.5) 12S 2.244 (57.0) 0.461 (11.7) 0.311 (7.9) 0.524 (13.3) 0.610 (15.5) 2.283 (58.0) 0.669 (17.0) 0.366 (9.3) 0.669 (17.0) 0.787 (20.0) 14S 2.244 (57.0) 0.461 (11.7) 0.417 (10.6) 0.669 (17.0) 0.752 (19.1) 2.283 (58.0) 0.669 (17.0) 0.417 (10.6) 0.787 (20.0) 0.866 (22.0) 16S 2.244 (57.0) 0.461 (11.7) 0.531 (13.5) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.531 (13.5) 0.906 (23.0) 0.984 (25.0) 16 2.480 (63.0) 0.453 (11.5) 0.531 (13.5) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.531 (13.5) 0.906 (23.0) 0.984 (25.0) 18 2.559 (65.0) 0.453 (11.5) 0.575 (14.6) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.575 (14.6) 0.965 (24.5) 1.102 (28.0) 20 2.677 (68.0) 0.500 (12.7) 0.736 (18.7) 1.031 (26.2) 1.165 (29.6) 2.756 (70.0) 0.709 (18.0) 0.728 (18.5) 1.122 (28.5) 1.260 (32.0) 22 2.677 (68.0) 0.500 (12.7) 0.819 (20.8) 1.031 (26.2) 1.165 (29.6) 2.756 (70.0) 0.709 (18.0) 0.819 (20.8) 1.201 (30.5) 1.339 (34.0) 24 2.756 (70.0) 0.500 (12.7) 0.969 (24.6) 1.358 (34.5) 1.488 (37.8) 2.756 (70.0) 0.709 (18.0) 0.969 (24.6) 1.358 (34.5) 1.496 (38.0) 28 2.795 (71.0) 0.500 (12.7) 1.063 (27.0) 1.358 (34.5) 1.488 (37.8) 2.756 (70.0) 0.709 (18.0) 1.063 (27.0) 1.476 (37.5) 1.614 (41.0) 32 2.913 (74.0) 0.598 (15.2) 1.311 (33.3) 1.717 (43.6) 1.882 (47.8) 2.953 (75.0) 0.709 (18.0) 1.311 (33.3) 1.732 (44.0) 1.890 (48.0) 36 2.913 (74.0) 0.598 (15.2) 1.516 (38.5) 1.717 (43.6) 1.882 (47.8) 3.346 (85.0) 0.709 (18.0) 1.516 (38.5) 2.008 (51.0) 2.165 (55.0) CB 4,6 STYLES B1 CB6 SHELL SIZE nt 124 CB4 L1 CB6 Q MAX (CB6) CB4 L 1 MAX Q1 MAX (CB4) L1 B1 THREAD 2A IN MM IN MM IN MM 10SL 0.898 (22.8) 1.122 (28.5) 0.969 (24.6) 9/16-24UNEF 12S 1.024 (26.0) - - 0.969 (24.6) 5/8-24UNEF 14S 1.150 (29.2) 1.378 (35.0) 0.969 (24.6) 3/4-20UNEF 16S 1.260 (32.0) 1.496 (38.0) 0.969 (24.6) 7/8-20UNEF 16 1.260 (32.0) 1.496 (38.0) 1.343 (34.1) 7/8-20UNEF 18 1.437 (36.5) 1.713 (43.5) 1.343 (34.1) 1-20UNEF 20 1.571 (39.9) 1.811 (46.0) 1.343 (34.1) 1-1/8-18UNEF 22 1.697 (43.1) 1.988 (50.5) 1.343 (34.1) 1-1/4-18UNEF 24 1.835 (46.6) 2.126 (54.0) 1.406 (35.7) 1-3/8-18UNEF 28 2.102 (53.4) 2.402 (61.0) 1.406 (35.7) 1-5/8-18UNEF 32 2.366 (60.1) 2.661 (67.6) 1.469 (37.3) 1-7/8-16UN 36 2.610 (66.3) 2.925 (74.3) 1.469 (37.3) 2-1/8-16UN For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CB 4,6 STYLES B4 xx 2 KK 3 L2 E R L 2 MAX XX2 MAX XX2 MIN L4 L3 F L 3 MAX KK 3 L5 P L 4 MAX SHELL SIZE IN MM IN MM IN MM IN MM IN MM IN MM 10SL 2.165 (55.0) 0.256 (6.5) 0.140 (3.6) 1.969 (50.0) 0.378 (9.6) 1.969 (50.0) 12S 2.165 (55.0) 0.256 (6.5) 0.140 (3.6) 1.969 (50.0) 0.406 (10.3) 1.969 14S 2.362 (60.0) 0.354 (9.0) 0.195 (5.0) 1.969 (50.0) 0.488 (12.4) 16S 2.362 (60.0) 0.433 (11.0) 0.255 (6.5) 1.969 (50.0) 0.606 (15.4) 16 2.756 (70.0) 0.433 (11.0) 0.255 (6.5) 2.362 (60.0) 0.606 18 2.953 (75.0) 0.559 (14.2) 0.285 (7.2) 2.441 (62.0) 20 2.953 (75.0) 0.622 (15.8) 0.350 (8.9) 2.441 22 2.953 (75.0) 0.622 (15.8) 0.350 (8.9) 2.441 24 3.543 (90.0) 0.843 (21.4) 0.468 (11.9) 28 3.543 (90.0) 0.843 (21.4) 0.468 32 3.543 (90.0) 1.051 (26.7) 36 3.937 (100.0) 1.248 (31.7) L 5 MAX B 4 THREAD 2A IN MM 5/8-24UNEF 1.562 (39.7) (50.0) 5/8-24UNEF 1.562 (39.7) 1.969 (50.0) 3/4-20UNEF 1.562 (39.7) 1.969 (50.0) 7/8-20UNEF 1.562 (39.7) (15.4) 2.362 (60.0) 7/8-20UNEF 2.000 (50.8) 0.724 (18.4) 2.362 (60.0) 1-20UNEF 2.000 (50.8) (62.0) 0.866 (22.0) 2.362 (60.0) 1-3/16-18UNEF 2.125 (54.0) (62.0) 0.972 (24.7) 2.362 (60.0) 1-3/16-18UNEF 2.125 (54.0) 2.441 (62.0) 1.087 (27.6) 2.559 (65.0) 1-7/16-18UNEF 2.125 (54.0) (11.9) 2.441 (62.0) 1.244 (31.6) 2.559 (65.0) 1-7/16-18UNEF 2.125 (54.0) 0.664 (16.9) 2.441 (62.0) 1.516 (38.5) 2.559 (65.0) 1-3/4-18NS 2.180 (55.4) 0.694 (17.6) 2.441 (62.0) 1.752 (44.5) 3.150 (80.0) 2-18NS 2.180 (55.4) CT R EB ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS CB 6 ENDBELL STYLES CT E EB Z 3 BB3 JJ3 Z 2 BB2 JJ2 N M K2 K3 L3 L2 SHELL SIZE L 2 MAX IN K 2 MAX MM IN MM Z 2 MIN IN MM BB 2 MAX IN MM JJ 2 .008(0.20) IN MM L 3 MAX IN MM K 3 MAX IN MM Z 3 MIN IN MM BB 3 MAX IN MM JJ 3 .008(0.20) IN MM 10SL 1.969 (50.0) 0.461 (11.7) 0.303 (7.7) 0.524 (13.3) 0.610 (15.5) 2.165 (55.0) 0.669 (17.0) 0.303 (7.7) 0.642 (16.3) 0.728 (18.5) 12S CB Nendbell.eps 1.969 (50.0) 0.461 (11.7) 0.311 (7.9) 0.524 (13.3) 0.610 (15.5) 2.165 (55.0) 0.669 (17.0) 0.366 (9.3) 0.669 (17.0) 0.787 (20.0) 14S 1.969 (50.0) 0.461 (11.7) 0.417 (10.6) 0.669 (17.0) 0.752 (19.1) 2.165 (55.0) 0.669 (17.0) 0.417 (10.6) 0.787 (20.0) 0.866 (22.0) 16S 1.969 (50.0) 0.461 (11.7) 0.531 (13.5) 0.862 (21.9) 0.941 (23.9) 2.362 (60.0) 0.709 (18.0) 0.531 (13.5) 0.906 (23.0) 0.984 (25.0) 16 2.362 (60.0) 0.461 (11.7) 0.531 (13.5) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.531 (13.5) 0.906 (23.0) 0.984 (25.0) 18 2.362 (60.0) 0.461 (11.7) 0.575 (14.6) 0.862 (21.9) 0.941 (23.9) 2.756 (70.0) 0.709 (18.0) 0.575 (14.6) 0.965 (24.5) 1.102 (28.0) 20 2.559 (65.0) 0.500 (12.7) 0.736 (18.7) 1.031 (26.2) 1.165 (29.6) 2.756 (70.0) 0.709 (18.0) 0.728 (18.5) 1.122 (28.5) 1.260 (32.0) 22 2.559 (65.0) 0.500 (12.7) 0.819 (20.8) 1.031 (26.2) 1.165 (29.6) 2.756 (70.0) 0.709 (18.0) 0.819 (20.8) 1.201 (30.5) 1.339 (34.0) 24 2.559 (65.0) 0.500 (12.7) 0.969 (24.6) 1.358 (34.5) 1.488 (37.8) 2.756 (70.0) 0.709 (18.0) 0.969 (24.6) 1.358 (34.5) 1.496 (38.0) 28 2.559 (65.0) 0.500 (12.7) 1.063 (27.0) 1.358 (34.5) 1.488 (37.8) 2.756 (70.0) 0.709 (18.0) 1.063 (27.0) 1.476 (37.5) 1.614 (41.0) 32 2.756 (70.0) 0.598 (15.2) 1.311 (33.3) 1.717 (43.6) 1.882 (47.8) 2.756 (70.0) 0.709 (18.0) 1.311 (33.3) 1.732 (44.0) 1.890 (48.0) 36 3.150 (80.0) 0.598 (15.2) 1.516 (38.5) 1.717 (43.6) 1.882 (47.8) 3.150 (80.0) 0.709 (18.0) 1.516 (38.5) 2.008 (51.0) 2.165 (55.0) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 125 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS CB 6T ENDBELL STYLES B1 B2 L1 L1 CB6T BARREL SHELL SIZE Q (CB6) MAX CB4T BARREL Q1 (CB4) MAX L1 L3 L2 CB6T ENDBELL L 2 MAX B 1 THREAD 2A CB6TP L 3 MAX B 2 THREAD 2A IN MM IN MM IN MM IN MM IN MM 10SL 0.898 (22.8) 1.122 (28.5) 0.969 (24.6) 9/16-24UNEF 2.188 (55.6) 5/8-24UNEF 1.463 (37.2) 12S 1.024 (26.0) - - 0.969 (24.6) 5/8-24UNEF 2.188 (55.6) 5/8-24UNEF 1.600 (40.6) 14S 1.150 (29.2) 1.378 (35.0) 0.969 (24.6) 3/4-20UNEF 2.312 (58.7) 3/4-20UNEF 1.600 (40.6) 16S 1.260 (32.0) 1.496 (38.0) 0.969 (24.6) 7/8-20UNEF 2.406 (61.1) 7/8-20UNEF 1.600 (40.6) 16 1.260 (32.0) 1.496 (38.0) 1.343 (34.1) 7/8-20UNEF 2.781 (70.6) 7/8-20UNEF 1.910 (48.5) 18 1.437 (36.5) 1.713 (43.5) 1.343 (34.1) 1-20UNEF 2.844 (72.2) 1-20UNEF 2.100 (53.3) 20 1.571 (39.9) 1.811 (46.0) 1.343 (34.1) 1-1/8-18UNEF 3.250 (82.6) 1-3/16-18UNEF 2.100 (53.3) 22 1.697 (43.1) 1.988 (50.5) 1.343 (34.1) 1-1/4-18UNEF 3.250 (82.6) 1-3/16-18UNEF 2.100 (53.3) 24 1.835 (46.6) 2.126 (54.0) 1.406 (35.7) 1-3/8-18UNEF 3.719 (94.5) 1-7/16-18UNEF 2.281 (57.9) 28 2.102 (53.4) 2.402 (61.0) 1.406 (35.7) 1-5/8-18UNEF 3.719 (94.5) 1-7/16-18UNEF 2.485 (63.1) 32 2.366 (60.1) 2.661 (67.6) 1.469 (37.3) 1-7/8-16UN 4.188 (106.4) 1-3/4-18NS 2.485 (63.1) 36 2.610 (66.3) 2.925 (74.3) 1.469 (37.3) 2-1/8-16UN 4.297 (109.1) 2-18NS 2.485 (63.1) CB7 STYLES SHELL SIZE B THREAD 2A J MIN J MAX L M N P R S D F 10SL 7/8-20UNEF 0.051 (1.3) 0.236 (6.0) 1.150 (29.2) 1.024 (26.0) 0.717 (18.2) 0.126 (3.2) 1.240 (31.5) 1.252 (31.8) 0.894 (22.7) 0.823 (20.9) 14S 1-1/8-18NEF 0.051 (1.3) 0.236 (6.0) 1.150 (29.2) 1.024 (26.0) 0.969 (24.6) 0.126 (3.2) 1.492 (37.9) 1.500 (38.1) 1.134 (28.8) 1.071 (27.2) 16S 1-1/4-18NEF 0.051 (1.3) 0.236 (6.0) 1.150 (29.2) 1.024 (26.0) 1.079 (27.4) 0.126 (3.2) 1.614 (41.0) 1.622 (41.2) 1.260 (32.0) 1.197 (30.4) 16 1-1/4-18NEF 0.051 (1.3) 0.236 (6.0) 1.484 (37.7) 1.752 (44.5) 1.079 (27.4) 0.157 (4.0) 1.614 (41.0) 1.622 (41.2) 1.260 (32.0) 1.197 (30.4) 18 1-3/8-18NEF 0.051 (1.3) 0.236 (6.0) 1.575 (40.0) 1.417 (36.0) 1.213 (30.8) 0.157 (4.0) 1.764 (44.8) 1.772 (45.0) 1.382 (35.1) 1.323 (33.6) 20 1-1/2-18NEF 0.051 (1.3) 0.236 (6.0) 1.575 (40.0) 1.417 (36.0) 1.346 (34.2) 0.157 (4.0) 1.929 (49.0) 1.937 (49.2) 1.504 (38.2) 1.449 (36.8) 22 1-5/818NEF 0.051 (1.3) 0.236 (6.0) 1.575 (40.0) 1.417 (36.0) 1.472 (37.4) 0.157 (4.0) 2.055 (52.2) 2.063 (52.4) 1.654 (42.0) 1.571 (39.9) 24 1-3/4-18NEF 0.051 (1.3) 0.236 (6.0) 1.575 (40.0) 1.417 (36.0) 1.610 (40.9) 0.157 (4.0) 2.165 (55.0) 2.173 (55.2) 1.760 (44.7) 1.697 (43.1) 28 2-18NEF 0.051 (1.3) 0.236 (6.0) 1.575 (40.0) 1.417 (36.0) 1.839 (46.7) 0.157 (4.0) 2.441 (62.0) 2.449 (62.2) 2.012 (51.1) 1.937 (49.2) 32 2-1/4-16UN 0.051 (1.3) 0.236 (6.0) 1.575 (40.0) 1.417 (36.0) 2.102 (53.4) 0.157 (4.0) 2.677 (68.0) 2.685 (68.2) 2.260 (57.4) 2.193 (55.7) 36 2-1/2-162UN 0.051 (1.3) 0.236 (6.0) 1.575 40.0) 1.417 (36.0) 2.346 (59.6) 0.157 (4.0) 2.953 (75.0) 2.961 (75.2) 2.512 (63.8) 2.441 (62.0) All dimensions in inches (millimeters in parenthesis) 126 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CB9 STYLES SHELL SIZE M .012(0.30) N .008(0.20) P .008(0.20) R .004(0.10) S .012(0.30) L .020(0.70) T PANEL THICKNESS IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 10SL 0.559 (14.2) 0.717 (18.2) 0.110 (2.8) 0.717 (18.2) 1.000 (25.4) 0.126 (3.2) 1.476 (37.5) 0.325 (8.2) 12S 0.559 (14.2) 0.843 (21.4) 0.126 (3.2) 0.811 (20.6) 1.102 (28.0) 0.126 (3.2) 1.476 (37.5) 0.325 (8.2) 14S 0.559 (14.2) 0.969 (24.6) 0.126 (3.2) 0.906 (23.0) 1.181 (30.0) 0.126 (3.2) 1.476 (37.5) 0.325 (8.2) 16S 0.559 (14.2) 1.079 (27.4) 0.126 (3.2) 0.969 (24.6) 1.280 (32.5) 0.126 (3.2) 1.476 (37.5) 0.325 (8.2) 16 0.748 (19.0) 1.079 (27.4) 0.126 (3.2) 0.969 (24.6) 1.280 (32.5) 0.126 (3.2) 2.024 (51.4) 0.445 (11.3) 18 0.748 (19.0) 1.213 (30.8) 0.157 (4.0) 1.063 (27.0) 1.378 (35.0) 0.126 (3.2) 2.024 (51.4) 0.445 (11.3) 20 0.748 (19.0) 1.346 (34.2) 0.157 (4.0) 1.157 (29.4) 1.496 (38.0) 0.126 (3.2) 2.024 (51.4) 0.445 (11.3) 22 0.748 (19.0) 1.472 (37.4) 0.157 (4.0) 1.252 (31.8) 1.614 (41.0) 0.126 (3.2) 2.024 (51.4) 0.445 (11.3) 24 0.811 (20.6) 1.610 (40.9) 0.157 (4.0) 1.374 (34.9) 1.752 (44.5) 0.146 (3.7) 2.024 (51.4) 0.383 (9.7) 28 0.811 (20.6) 1.839 (46.7) 0.157 (4.0) 1.563 (39.7) 2.000 (50.8) 0.146 (3.7) 2.024 (51.4) 0.383 (9.7) 32 0.874 (22.2) 2.102 (53.4) 0.157 (4.0) 1.752 (44.5) 2.244 (57.0) 0.169 (4.3) 2.024 (51.4) 0.320 (8.1) 36 0.874 (22.2) 2.346 (59.6) 0.157 (4.0) 1.937 (49.2) 2.500 (63.5) 0.169 (4.3) 2.024 (51.4) 0.383 (9.7) CB PC PIN STLYES SHELL SIZE M .016(0.40) N .006(0.15) P MAX R .006(0.10) S .016(0.40) L .012(0.30) T KK MAX IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 10SL 0.717 (18.2) 0.717 (18.2) 0.110 (2.8) 0.717 (18.2) 1.000 (25.4) 0.126 (3.2) 0.972 (24.7) 0.638 (16.2) 14S 0.717 (18.2) 0.969 (24.6) 0.126 (3.2) 0.906 (23.0) 1.181 (30.0) 0.126 (3.2) 0.972 (24.7) 0.756 (19.2) 12S 16S 16 18 20 22 24 28 32 36 0.717 0.717 0.846 0.907 0.907 0.907 0.907 0.947 0.947 0.947 (18.2) (18.2) (21.5) (23.1) (23.1) (23.1) (23.1) (24.1) (24.1) (24.1) 0.843 1.079 1.079 1.213 1.346 1.472 1.610 1.839 2.102 2.346 (21.4) (27.4) (27.4) (30.8) (34.2) (37.4) (40.9) (46.7) (53.4) (59.6) 0.126 0.126 0.126 0.157 0.157 0.157 0.157 0.157 0.157 0.157 (3.2) (3.2) (3.2) (4.0) (4.0) (4.0) (4.0) (4.0) (4.0) (4.0) 0.811 0.969 0.969 1.063 1.157 1.252 1.374 1.563 1.752 1.937 (20.6) (24.6) (24.6) (27.0) (29.4) (31.8) (34.9) (39.7) (44.5) (49.2) 1.102 1.280 1.280 1.378 1.496 1.614 1.752 2.000 2.244 2.500 (28.0) (32.5) (32.5) (35.0) (38.0) (41.0) (44.5) (50.8) (57.0) (63.5) 0.126 0.126 0.126 0.126 0.126 0.126 0.146 0.146 0.169 0.169 (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.7) (3.7) (4.3) (4.3) 0.972 0.972 1.331 1.331 1.331 1.331 1.331 1.331 1.331 1.331 (24.7) (24.7) (33.8) (33.8) (33.8) (33.8) (33.8) (33.8) (33.8) (33.8) ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS 0.638 0.882 0.882 1.008 1.142 1.268 1.390 1.630 1.882 2.130 (16.2) (22.4) (22.4) (25.6) (29.0) (32.2) (35.3) (41.4) (47.8) (54.1) Note: Please contact us for centerline spacing of individual layouts. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 127 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS DIMENSIONS PANEL CUTOUTS Dim. J=flange in front of panel Dim. K=flange at rear of panel a See sealing screws on page 325 FLANGE STYLE 0-2-9 HOLE DIAMETER Note: for CB7 Panel cutouts a See page 126 STYLE 0-2-9 FRONT MOUNT STYLE 0-2-9 REAR MOUNT STYLE CB7 REAR MOUNT SHELL SIZE MOUNTING G H J K H K 10SL 0.717 (18.2) 0.134 (3.4) 0.646 (16.4) 0.728 (18.5) 0.823 (21) 0.894 (22.7) 12S 0.811 (20.6) 0.134 (3.4) 0.646 (16.4) 0.854 (21.7) 0.949 (24) 1.012 (25.7) 14S 0.906 (23.0) 0.134 (3.4) 0.776 (19.7) 0.980 (24.9) 1.071 (27) 1.134 (28.8) 16S 0.969 (24.6) 0.134 (3.4) 0.902 (22.9) 1.091 (27.7) 1.197 (30) 1.260 (32.0) 16 0.969 (24.6) 0.134 (3.4) 0.902 (22.9) 1.091 (27.7) 1.197 (30) 1.260 (32.0) 18 1.063 (27.0) 0.134 (3.4) 1.028 (26.1) 1.224 (31.1) 1.323 (34) 1.382 (35.1) 20 1.157 (29.4) 0.134 (3.4) 1.161 (29.5) 1.358 (34.5) 1.449 (37) 1.504 (38.2) 22 1.252 (31.8) 0.134 (3.4) 1.287 (32.7) 1.488 (37.8) 1.571 (40) 1.654 (42.0) 24 1.374 (34.9) 0.154 (3.9) 1.417 (36.0) 1.626 (41.3) 1.697 (43) 1.760 (44.7) 28 1.563 (39.7) 0.154 (3.9) 1.654 (42.0) 1.854 (47.1) 1.937 (49) 2.012 (51.1) 32 1.752 (44.5) 0.177 (4.5) 1.902 (48.3) 2.118 (53.8) 2.193 (56) 2.260 (57.4) 36 1.937 (49.2) 0.177 (4.5) 2.150 (54.6) 2.362 (60.0) 2.441 (62) 2.512 (63.8) PANEL THICKNESS Front Mount Rear Mount SHELL SIZE REAR MOUNT FRONT MOUNT 10SL .315 (8.00) .138 (3.50) 12S .315 (8.00) .138 (3.50) 14S .315 (8.00) .138 (3.50) 16S .315 (8.00) .138 (3.50) 16 .256 (6.50) .138 (3.50) 18 .315 (8.00) .138 (3.50) 20 .315 (8.00) .138 (3.50) 22 .315 (8.00) .138 (3.50) 24 .315 (8.00) .197 (5.00) 28 .315 (8.00) .197 (5.00) 32 .354 (9.00) .236 (6.00) 36 .354 (9.00) .236 (6.00) All dimensions in inches (millimeters in parenthesis) 128 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com STYLE J High-reliability, gland-seal endbell with an integrated compression disc that provides a watertight seal around the outside of a round, jacketed cable. Supplied with cable clamp. Wire sealing range is as follows: STYLE U (POTTED PREFERRED) STYLE D (GROMMET & FERRULE, CONTACT US) CONSTANT FORCE SPRING ZT93-03-003-1 EMI SHIELD TAPE SHELL SIZE WIRE DIAMETER INCHES(MM) MAX MIN 10SL .31 (8.0) .13 (3.3) 14S .44 (11.2) .21 (5.3) 16S .53 (13.5) .32 (8.1) 16 .53 (13.5) .32 (8.1) 18 .63 (15.9) .43 (10.9) 20 .75 (19.1) .49 (11.9) 22 .75 (19.1) .49 (11.9) 24 .94 (23.9) .67 (17.0) 28 .94 (23.9) .67 (17.0) 32 1.25 (31.8) .96 (24.4) 36 1.37 (34.9) 1.07 (27.4) This endbell is for use with unshielded, braided-shield or cable to terminate and extend the shield through the connector. There are three basic ways to terminate the U and D style endbell. One version uses a metal, constant-force spring to captivate the shield and can be reused/reworked if the connector needs to be serviced. The second version uses a stainless steel strap to lock the shield to the endbell. The third version is to use our conductive cloth EMI shield tape to easily tape the endbell to the shield. Heat shrink boots are used to environmentally seal the endbell and provide a smooth, finished appearance. a See pages 326-331 for boot BAND ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ENDBELLS STYLE I This endbell is internally threaded to accept externally threaded NPT pipe threads. A broad range of standard NPT thread sizes can be accommodated. Contact us for ordering information. STYLE X This endbell is externally threaded to accept internally threaded NPT pipe threads. A broad range of standard NPT thread sizes can be accommodated. Contact us for ordering information. STYLE ST These endbells directly accept Sealtite conduit. A locknut and O-ring insures a watertight connection. Normally supplied straight but right angle and 45 versions are available. A broad range of Sealtite tubing diameters can be accommodated. Contact us for ordering information. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 129 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ENDBELLS STYLE E Endbell with integrated cable clamp that is supplied with individual wire-sealing grommet and ferrule. A telescoping neoprene bushing is captivated by the clamp. If desired, these bushings can be stacked to provide the optimum inside diameter for your cable. a See page 132 or contact us for ordering information Supplied standard for CB only. STYLE R Endbell without cable clamp that is supplied with individual wire sealing grommet and ferrule. Rear section has two threaded holes to accommodate grounding screws or dust cap chains. STYLE N This endbell is designed for use with shrink boots or shrink tubing. A knurled rear section with ledge provides an excellent surface for the tubing to grab the metal endbell. Supplied with individual wire sealing grommet. Ferrule not required. a See Heat Shrink Boots on pages 326 - 331 STYLE M For use with braid-shielded cable to terminate and extend the shield through the connector. Typically used with a shrink boot. Supplied with individual wire sealing grommet; ferrule not required. a See Heat Shrink Boots on pages 326 - 331 ASSEMBLY OF SHIELDED ENDBELL (USING OPTIONAL SHRINK BOOT) 1. Remove the locknut and slide shrink boot and locknut over cable in proper sequence for re-assembly. 2. Slide screen meshing on cable over the endbell so that it covers the rounded groove and locknut threads. 3. Fasten the screen into the rounded groove with baling wire. 4. Fold back the protruding screen over the baling wire. 130 5. Slide the locknut over the folded back screen so that the meshing is clamped under the nut and appears under the locknut facing the cable. 6. Tighten locknut. 7. Slide shrink boot over knurled locknut and raised toothed ring. 8. Shrink in place over the endbell first, then continue down the cable. For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com STYLE L Long-extension endbell that allows additional room for wiring. Accepts Style A or C cable clamps. a See pages 132-133 for cable clamps STYLE F Standard endbell for use with Style A or C cable clamps. Supplied with individual wire sealing grommet and ferrule. This endbell can also be used with appropriately sized plastic flex tubing which is press-fit over the rear threads. a See pages 132-133 for cable clamps STYLE T Right angle endbell supplied with individual wire sealing grommet and ferrule. Accepts Style A or C cable clamp. Internal teeth inside the endbell mate with teeth on the rear of the connector to allow the angled endbell to be locked into a specific orientation. a See pages 132-133 for cable clamps ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ENDBELLS STYLE P Potting cup endbell sealed with epoxy. After wire termination, the inside of the cup is filled with potting compound forming a solid, permanent, watertight seal around the wires. a See pages 330 for for potting compound and applicator STYLE PG GLAND SEAL ENDBELL INTERNAL GLAND SEAL Lower-cost, metal, gland-seal endbell which comes in a variety of wire sealing ranges. Contact us with your cable outside diameter for appropriate part number. a See pages 336 - 337 For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 131 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ACCESSORIES MS3057-A CABLE CLAMP Standard MS3057 cable clamps have a dual clamping action to provide a balanced, positive hold on the wires and greatly reduce moisture transmission. This cable clamp accepts MS3420 bushings. MS3420 bushings can be nested to reduce the inside diameter to more closely match the diameter of the cable or wire bundle. STANDARD CLAMP STANDARD CLAMP AND TELESCOPIC BUSHING SHELL SIZE THREAD 2B LOW COST CAST ZINC ALUMINUM W/ BRASS SCREWS ALUMINUM W/ STAINLESS STEEL SCREWS MAXIMUM CABLE DIAMETER INCH (MM) LOW COST ZINC WITH BUSHING 8S/ 10S 1/2-28UNEF 97-3057-1003* MS3057-3A M85049/41-3A .220 (5.58) 97-3057-1003*-1 MS3420-3 0.130 (3.3) 10SL 5/8-24UNEF 97-3057-1004* MS3057-4A M85049/41-4A .312 (7.92) 97-3057-1004*-1 MS3420-4 0.220 (5.6) 12/12S/12SL 5/8-24UNEF 97-3057-1004* MS3057-4A M85049/41-4A .312 (7.92) 97-3057-1004*-1 MS3420-4 0.220 (5.6) 14/14S 3/4-20UNEF 97-3057-1007* MS3057-6A M85049/41-6A .438 (11.13) 97-3057-1007*-1 MS3420-6 0.312 (7.9) 16/16S 7/8-20UNEF 97-3057-1008* MS3057-8A M85049/41-8A .562 (14.27) 97-3057-1008*-1 MS3420-8 0.437 (11.1) INCLUDES BUSHING ID THIS BUSHING INCH (MM) 18 1-20UNEF 97-3057-1010* MS3057-10A M85049/41-10A .625 (15.88) 97-3057-1010*-1 MS3420-10 0.562 (14.3) 20/22 1 3/16-18UNEF 97-3057-1012* MS3057-12A M85049/41-12A .750 (19.05) 97-3057-1012*-1 MS3420-12 0.625 (15.9) 24/28 1 7/16-18UNEF 97-3057-1016* MS3057-16A M85049/41-16A .938 (23.83) 97-3057-1016*-1 MS3420-16, -12 0.625 (15.9) 32 1 3/4-18UNS 97-3057-1020* MS3057-20A M85049/41-20A 1.250 (31.75) 97-3057-1020*-1 MS3420-20, -16 0.750 (19.1) 36 2-18UNS 97-3057-1024* MS3057-24A M85049/41-24A 1.375 (34.92) 97-3057-1024*-1 MS3420-24, -20 0.937 (23.8) 40 2 1/4UNS-16 - MS3057-28A M85049/41-28A 1.625 (41.28) - - - *Default plating - Olive drab chromate over cadmium -621 = Black Alloy (RoHS) MS3057-C WATERPROOF CABLE CLAMP Standard MS3057-C waterproof cable clamp with mechanical strain relief for use with style F, L and T endbells. Internal neoprene gland and compression ring will seal a broad range of round cable diameters as listed below. For reduction of cable diameters, order the appropriate MS3420A bushing in table. SHELL SIZE PART NUMBER 10SL/12S WIRE DIAMETER INCHES (MM) OPTIONAL BUSHINGS MAX. MIN. PART NUMBER MAX. WIRE DIA. (MM) MS3057-4C .312 (7.93) .188 (4.80) MS3420-4A .219 (5.56) 14S MS3057-6C .438 (11.12) .281 (7.10) MS3420-6A MS3420-4A .312 (7.93) .219 (5.56) 16/16S MS3057-8C .530 (13.48) .312 (7.90) MS3420-8A MS3420-6A .438 (11.10) .312 (7.93) 18 MS3057-10C .625 (15.87) .375 (9.50) MS3420-10A MS3420-6A .438 (11.10) .312 (7.93) 20/22 MS3057-12C .750 (19.00) .500 (12.70) MS3420-12A MS3420-8A .540 (13.74) .438 (11.10) 24/28 MS3057-16C .940 (23.8) .625 (15.90) 32 MS3057-20C 1.25 (31.75) .921 (23.4) 36 MS3057-24C 1.38 (35.00) 1.00 (25.40) 40 MS3057-28C 1.62 (41.25) 1.25 (31.80) MS3420-16A MS3420-12A MS3420-8A MS3420-20A MS3420-16A MS3420-12A MS3420-24A MS3420-18A MS3420-16A MS3420-28A MS3420-20A MS3420-16A .750 (19.00) .540 (13.74) .438 (11.10) .938 (23.80) .750 (19.00) .540 (13.74) 1.12 (28.5) .938 (23.80) .750 (19.00) 1.25 (31.75) .940 (23.80) .750 (19.00) All dimensions in inches (millimeters in parenthesis) 132 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com MS3420 TELESCOPING BUSHINGS For use with style A cable clamps and CB/CT style E/F endbells to eliminate dust, dirt and oil from entering the cable clamp. Bushings can be nested, one inside the other, to reduce the inside diameter and form a better seal against the cable jacket. Each bushing will accept the next smallest bushing. 1ST BUSHING PART NUMBER INSIDE DIAMETER 2ND NESTED BUSHING INSIDE DIAMETER FITS IN CABLE CLAMP MS3420-4 .220 (5.59) 12S MS3420-4 NONE - MS3057-4A .220 (5.59) NONE - 14S MS3057-4A MS3420-6 .312 (7.92) NONE - MS3057-6A 16S MS3420-8 .437 (11.10) NONE - MS3057-8A 16 MS3420-8 .437 (11.10) NONE - MS3057-8A 18 MS3420-10 .562 (14.30) NONE - MS3057-10A 20 MS3420-12 .625 (15.90) NONE - MS3057-12A 22 MS3420-12 .625 (15.90) NONE - MS3057-12A 24 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A 28 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A 32 MS3420-20 .937 (23.80) MS3420-16 .750 (19.05) MS3057-20A 36 MS3420-24 1.250 (31.75) MS3420-20 .937 (23.80) MS3057-24A 40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4 SHELL SIZE 10SL All dimensions in inches (millimeters in parenthesis) MS3420-A REDUCTION BUSHINGS For use with MS3057-C cable clamps (Style C) to reduce the wire sealing diameter. Bushings can be nested, one inside the other, to progressively reduce the inside diameter of the cable clamp. The column labeled Optional Bushings shows the acceptable nesting options for each clamp. ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ACCESSORIES 9767 CABLE CLAMPS 9767 waterproof cable clamp with mechanical strain relief. An internal neoprene gland seal bushing and compression washer will seal a broad range of round cable diameters as listed below. SHELL SIZE CABLE CLAMP PART NUMBER 10SL, 12S 9767-12-4* 14S 9767-14-4* 14S MAX. CABLE OD INCHES MIN. CABLE OD (MM) THREAD 2B 0.219 (MM) (5.55) INCHES 0.020 (0.51) 5/8-24 UNEF 0.219 (5.55) 0.020 (0.51) 3/4-20 UNEF 9767-14-6* 0.344 (8.73) 0.176 (4.47) 3/4-20 UNEF 16S, 16 9767-16-4* 0.219 (5.55) 0.020 (0.51) 7/8-20 UNEF 16S, 16 9767-16-6* 0.344 (8.73) 0.176 (4.47) 7/8-20 UNEF 16S, 16 9767-16-8* 0.438 (11.12) 0.177 (4.50) 7/8-20 UNEF 18 9767-18-6* 0.344 (8.73) 0.176 (4.47) 1-20 UNEF 18 9767-18-8* 0.438 (11.12) 0.177 (4.50) 1-20 UNEF 18 9767-18-10* 0.563 (14.29) 0.292 (7.42) 1-20 UNEF 20, 22 9767-22-8* 0.438 (11.12) 0.177 (4.50) 1-3/16-18 UNEF 20, 22 9767-22-10* 0.563 (14.29) 0.292 (7.42) 1-3/16-18 UNEF 20, 22 9767-22-12* 0.688 (17.46) 0.370 (9.40) 1-3/16-18 UNEF 24, 28 9767-28-10* 0.563 (14.29) 0.292 (7.42) 1-7/16-18 UNEF 24, 28 9767-28-12* 0.688 (17.46) 0.370 (9.40) 1-7/16-18 UNEF 24, 28 9767-28-16* 0.844 (21.43) 0.536 (13.61) 1-7/16-18 UNEF 32 9767-32-20* 1.031 (26.19) 0.590 (14.99) 1-3/4-18 UNS 36 9767-36-16* 0.844 (21.43) 0.536 (13.61) 2-18 UNS *Default plating - Olive drab chromate over cadmium -621 = Black Alloy (RoHS) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 133 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ACCESSORIES GASKETS POLYCHLOROPRENE gaskets are used to insure a moisture tight seal between a receptacle and the panel. Gaskets are available for front or rear panel mounting of STYLE 0, 2, and 9 connectors. Gasket thickness is approximately .037" (1.0 mm). ALU-FLEX gaskets contain an imbedded metal screen for EMI/RFI shielding in addition to moisture sealing. Gaskets are available for front or rear panel mounting of STYLE 0, 2, and 9 connectors. Gasket thickness is .019" (.5 mm). SHELL SIZE FRONT MOUNTING REAR MOUNTING NON-CONDUCTIVE CONDUCTIVE NON-CONDUCTIVE CONDUCTIVE 12S, 12 MS52000-3 075-8513-001 075-8502-000 075-8502-001 14S, 14 MS52000-4 075-8514-001 075-8503-000 075-8503-001 16S MS52000-5 075-8515-001 075-8504-000 075-8504-001 16 MS52000-5 075-8515-001 075-8504-000 075-8504-001 18 MS52000-6 075-8516-001 075-8505-000 075-8505-001 20 MS52000-7 075-8517-001 075-8506-000 075-8506-001 22 MS52000-8 075-8518-001 075-8507-000 075-8507-001 24 MS52000-9 075-8519-001 075-8508-000 075-8508-001 28 MS52000-10 075-8520-001 075-8509-000 075-8509-001 32 MS52000-12 075-8521-001 075-8510-000 075-8510-001 36 MS52000-13 075-8522-001 075-8511-000 075-8511-001 10S, 10SL MS52000-2 075-8512-001 075-8501-000 075-8501-001 METAL DUST CAPS WITH SASH CHAIN FOR PLUG STYLES 4 & 6 FOR RECEPTACLE STYLES 0, 1, 2, 7, & 9 SHELL SIZE CAD OD A232 A34 CAD OD A232 A34 10SL CA121004-1 CA121004-71 CA121004-701 CA121003-1 CA121003-71 CA121003-701 12S CA121004-2 CA121004-72 CA121004-702 CA121003-2 CA121003-72 CA121003-702 14S CA121004-3 CA121004-73 CA121004-703 CA121003-3 CA121003-73 CA121003-703 16S CA121004-4 CA121004-74 CA121004-704 CA121003-4 CA121003-74 CA121003-704 16 CA121004-5 CA121004-75 CA121004-705 CA121003-5 CA121003-75 CA121003-705 18 CA121004-6 CA121004-76 CA121004-706 CA121003-6 CA121003-76 CA121003-706 20 CA121004-7 CA121004-77 CA121004-707 CA121003-7 CA121003-77 CA121003-707 22 CA121004-8 CA121004-78 CA121004-708 CA121003-8 CA121003-78 CA121003-708 24 CA121004-9 CA121004-79 CA121004-709 CA121003-9 CA121003-79 CA121003-709 28 CA121004-10 CA121004-80 CA121004-710 CA121003-10 CA121003-80 CA121003-710 32 CA121004-11 CA121004-81 CA121004-711 CA121003-11 CA121003-81 CA121003-711 36 CA121004-12 CA121004-82 CA121004-712 CA121003-12 CA121003-82 CA121003-712 A233, A239, A240 platings available, please contact us. 134 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com DUMMY RECEPTACLES Dummy Receptacles are for front or rear panel mounting. CB/CAB series have bayonet ramps; the center of the connector is closed. Dummy receptacles mount on the same centers and have the same outside dimensions as a STYLE 2 receptacle. The material is aluminum alloy and has an olive chromate over cadmium plating. A version with a clearance hole through the middle of the connector is also available. Contact us for ordering information. SHELL SIZE CB/CAB 10SL 248-8501-000 12S 248-8502-000 14S 248-8503-000 16S 248-8504-000 16 248-8505-000 18 248-8506-000 20 248-8507-000 22 248-8508-000 24 248-8509-000 28 248-8510-000 32 248-8511-000 36 248-8512-000 a See Accessories section for sealing screws on page 325 SEAL RINGS ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ACCESSORIES Replacement seal rings for CB series STYLE 4 and 6 connectors. 1,8 dg D9 3 +0,2 + 0,2 SHELL SIZE NEOPRENE SILICONE D9 INSIDE DIA. INCHES (MM) 10SL 980-8550-000 980-8550-002 .354 (9.0) 12S 980-8551-000 N/A .452 (11.5) 14S 980-8552-000 980-8552-002 .551 (14.0) 16/16S 980-8553-000 980-8553-002 .670 (17.0) 18 980-8554-000 980-8554-002 .768 (19.5) 20 980-8555-000 980-8555-002 .886 (22.5) 22 980-8556-000 980-8556-002 1.00 (25.4) 24 980-8557-000 980-8557-002 1.12 (28.5) 28 980-8558-000 980-8558-002 1.38 (34.0) 32 980-8559-000 980-8559-002 1.57 (40.0) 36 980-8560-000 980-8560-002 1.83 (45.0) 40 N/A 980-8561-002 1.97 (50.0) All dimensions in inches (millimeters in parenthesis) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 135 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ASSEMBLY INSTRUCTIONS 1. SOLDER CONTACTS STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for reassembly: cable clamp and/or endbell first, then ferrule and (if used) coupling nut. STEP 2: Insert individual wires through the proper holes in the grommet. Use isopropyl alcohol as a lubricant. STEP 5: Slide the grommet down the wires (lubricating the grommet with isopropyl alcohol will help). STEP 6: Fill all unused grommet cavities with a wire hole filler to maintain the sealing integrity of the connector. 2. STEP 3: Solder wires to appropriate contacts on the rear of the connector. ITT Cannon document RPI234 covers standard soldering practices and is available upon request by fax or mail, please contact us. STEP 4: Fixture the connector for reassembly using endbell assembly tools. STEP 7: Slide coupling nut, ferrule and endbell accessories over rear of the connector and tighten. CRIMP TOOL OPERATION NOTE: Hand crimp tools can be used with size 16S, 16 & 12 contacts. Size 8, 4 and 0 contacts require the use of air powered crimp tools. Contact us for assistance in the use of these tools. LOCATOR LATCH CRIMP TOOL LOCATOR LATCH LOCATOR COLOR CODE INDEX MARK TURRET STEP1: Strip the wires to the appropriate length. DIAL STEP 2: Open the AF8 crimp tool by squeezing the handles. Push the latch on the turret to pop up the locator. Attach the turret to the crimp tool using the two captive hex bolts in the turret. STEP 3: Select the proper locator position for your contact by rotating the locator until the proper color is aligned with the index mark. Push locator back down until it snaps into position. CONTACT SIZE PIN LOCATOR COLOR SOCKET LOCATOR COLOR 16 GREEN RED 12 RED RED 16S CRIMP LOCK PIN WIRE TH452 BLUE GREEN CHECK TO BE SURE CONDUCTOR IS VISIBLE THROUGH WIRE INSPECTION HOLE INSULATION SHOULD PRESS AGAINST THE END OF THE CONTACT. STEP 4: Adjust dial for proper wire gauge. To change the dial setting, remove the lock pin and lift center of dial. Turn to the desired wire gauge. Replace lock pin on dial. 136 STEP 5: Cycle the tool before inserting the contact to be sure the tool is in the open position. Drop the contact, mating end first, into the crimp cavity of the tool. Squeeze the tool handle just enough to grip the contact without actually crimping it. STEP 6: Insert the stripped wire into the contact with a slight twisting motion. Be sure all wire strands are inside the contact. Squeeze the handle to cycle the tool. The handle will not release until the contact is completely crimped. STEP 7: Remove the crimped contact. Pull on the wire slightly to be sure it is properly crimped. Be sure the contact is not bent or damaged in any way. Visually inspect the crimp. MICRO SECTIONS: Enlargement of microsection allows for final judgement of crimp quality. This test is recommended whenever new tools or new types of wire or contacts are used. For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com 3. INSERTION OF CONTACTS GUIDE PIN INSERTION TOOL CONNECTOR SHOULDER ASSEMBLY FIXTURE STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for reassembly: cable clamp and/or endbell first, then ferrule, and (if used) coupling nut. STEP 2: Use the proper insertion tool. Place the contact in the tool. The tool should press against the shoulder of the contact. Contact sizes 16S, 16, and 12 use a pliers style tool. Contact sizes 8, 4 and 0 use a tool with a `C' shaped shaft. STEP 3: Lubricate the grommet with isopropyl alcohol (do not use any lubricant other than isopropyl alcohol). Insert the contact through the appropriate cavity in the grommet. Sizes 16S, 16 and 12 SOCKET contacts must be installed using guide pins. STEP 4: Place the connector into an assembly fixture (fixtures are available for production use, contact us). If you are not using a fixture, be sure to allow clearance on the mating face of the connector for the guide pins to come through the connector during insertion. UNCRIMPED CONTACTS STEP 5: Lubricate the contact cavities of the connector insulator with isopropyl alcohol (do not use any other type of lubricant). STEP 6: Using guide pins where necessary, push straight down with a firm even pressure until the contact snaps into position in the proper cavity. Start at the center of the pattern and work toward the outer edges. STEP 9: A wire hole filler must be inserted into the grommet behind the unused contacts to maintain the sealing integrity of the connector. STEP 7: Fill any unused cavities with contacts. STEP 8: Check the mating face of the connector to insure that all the same size contacts are on the same plane (fully inserted). If not, the contact is not fully inserted. Remove the contact using the proper extraction tool and procedure and re-insert. Do not attempt to reinsert the insertion tool to correct the problem. ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ASSEMBLY INSTRUCTIONS STEP 10: Place the connector back in the fixture for reassembly. Slide the connector accessories back down the cable over the rear of the connector and tighten. 4. EXTRACTION OF CONTACTS SOFT JAW PLIERS CROSS-SECTION OF CONNECTOR SOCKET EXTRACTION END CROSS-SECTION OF CONNECTOR LOCK RING HANDLE PIN EXTRACTION END STEP 1: Remove the endbell accessories and slide them back over the wires. STEP 2: Use the proper extraction tool. The extraction tool can be used for both pin and socket contacts by removing the shaft from the handle and reversing it for pin or socket extraction. PIN CONTACT SOCKET CONTACT STEP 3: On the mating face of the connector, insert the tool over the pin contact or into the socket contact until the tool bottoms. Apply a slow continuous pressure to push the contact out the rear of the connector. When the shoulder of the tool "thunks" against the insulator, the contact is extracted. STEP 4: Carefully remove the extraction tool from the connector to avoid damage to the insulator. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 137 ITT CANNON CA-B / CB SERIES BAYONET CONNECTORS ITT CANNON PAR T NUMBERING CA-BAYONET CONNECTORS CA Series Shell Style 3106 Class E 36-10 Shell Size-Contact Arrangement EXPLANATION SERIES CA - Circular connectors with bayonet coupling SHELL STYLE 3100 - Wall mounting receptacle (metric thread holes standard w/o mod) 3101 - Cable connecting plug (receptacle) 3102 - Box mounting receptacle 3106 - Plug, straight 3108 - Plug, 90 TBF - Bulkhead receptacle CLASS E - Environmental with resilient insulators and endbell with clamp and bushing F - Environmental with resilient insulator and endbell for flex tube R - Environmental with resilient insulator and shortened light-weight endbell without cable clamp SHELL SIZE 10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24, 28, 32, and 36 CONTACT ARRANGEMENT a See pages 104 - 108 CONTACT TYPE P - Pin S - Socket PS - One side pin, one side socket (only for TBF) WITH SPRING WASHER AND FRICTION RING These connectors feature a spring washer and a friction ring under the coupling nut. Used in high vibration applications. CA06EW - Connector with spring washer, endbell with cable and bushing CA06FW - Connector with spring washer, endbell and protect hose CA06RW - Connector with spring washer and short endbell * Boot ordered separately. a See pages 326 - 331. P X Contact Type B Insulator Position 03 Connectors with Bayonet Coupling Modification INSULATOR POSITION Besides the normal position further insulator positions are possible for Cannon connectors to prevent mismating. Polarization is achieved by turning the pin contact insulator clockwise; the socket insulator, counter clockwise. This information refers to the mating side of the contact insulator. MODIFICATION 01 - Metric crimp contacts 02 - Adapter for heat shrink boots, AWG crimp* 03 - Adapter for heat shrink boots, metric contacts* 04 - Rear mount, thread in flange, metric crimp contacts (for CA3102 only) 05 - Rear mount through holes in flange (for CA3102 and CA3100 only) 06 - Shrink boot adapter, solder contacts* 08 - Angular endbell, threaded holes in flange (for CA3100 only) 09 - Angular endbell, through holes in flange (for CA3100 only) 13 - Shielded version, solder contacts* 14 - Shielded version, metric crimp contacts* 15 - Shielded version, AWG crimp contacts* 109 - F80, rear mount, thread holes in flange (for CA3102 and CA3100 only) 111 - Rear mount, thread holes, solder contacts (for CA3102 only) F80 - AWG crimp contacts A34 - Bright nickel A152 - Heavy gold plated contacts A176 - Gold plated contacts A232 - Black zinc cobalt A233 - Green zinc cobalt 39 - Rubber cover coupling nut A239 - Conductive Black RoHS 500 Hr Salt Spray A240 - Conductive Blue RoHS 500 Hr Salt Spray OTHER SHELL STYLES CA3100E-B-02/03/06 - Adapter for heat shrink boot CA3100F-B-08/09 - 90 endbell for flex tube CA3100E-B-08/09 - 90 endbell, cable clamp and busing CA06PG-B - PG adapter CA3101E-B-02/03/06 - Adapter for heat shrink boots CA3101F-B-08/09 - 90 endbell flex tube CA02L-B - Receptacle with PC contacts CA20L-B - Rear mount receptacle with PC contacts CA07A-B - Jam nut receptacle HAVE A UNIQUE REQUIREMENT? Quick assembly of custom products is our specialty! Email us at sales@peigenesis.com or complete our online Technical Request at www.peigenesis.com/technical-support. To contact us by phone, please see the back cover for a complete listing of our branch offices and contact numbers. 138 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com