Multi CERAMOS Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB C9TP Released Besondere Merkmale Features * Gehausetyp: Keramik Gehause fur RGB-Anzeigen mit diffusem Silikon Verguss. * Besonderheit des Bauteils: additive Farbmischung durch unabhangige Ansteuerung aller Chips; Kontrasterhohung durch schwarze Oberflache (RGB-Displays) * Wellenlange: 625 nm (rot), 528 nm (true green), 470 nm (blau) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinFilm (rot), ThinGaN (true green, blau) * optischer Wirkungsgrad: 45 lm/W (rot), 45 lm/W (true green), 15 lm/W (blau) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12 mm Gurt mit 1000/Rolle, o180 mm * ESD-Festigkeit: ESD-sensitives Bauteil * package: ceramic package for RGB-Displays with diffused silicon resin. * feature of the device: additive mixture of color stimuli by independent driving of each chip; higher contrast by a black surface (RGB-Displays) * wavelength: 625 nm (red), 528 nm (true green), 470 nm (blue) * viewing angle: Lambertian Emitter (120) * technology: ThinFilm (red), ThinGaN (true green, blue) * optical efficiency: 45 lm/W (red), 45 lm/W (true green), 15 lm/W (blue) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 1000/reel, o180 mm * ESD-withstand voltage: ESD senitive Device Anwendungen * Anzeigen im Innen- und Auenbereich (z.B. im Verkehrsbereich; Laufschriftanzeigen) * Getrennte Anteuerung der Leuchtdiodenchips zur Darstellung verschiedener Farben inclusive wei * Vollfarbdisplays bzw. RGB-Displays * Hinterleuchtung (LCD, Schalter, Tasten, Werbebeleuchtung, Allgemeinbeleuchtung) * Einkopplung in Lichtleiter Applications * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * LED chips can be controlled seperately to display various colors including white * full color displays, RGB-Displays * backlighting (LCD, switches, keys, illuminated advertising, general lighting) * coupling into light guides 2010-12-02 1 LRTB C9TP Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 25 Type Color of Emission Luminous Intensity1) page 25 IF = 140 mA IV (mcd) red LRTB C9TP red true green blue true green blue 2.800...8.000 5.000 ...14.000 1.400 ...5.000 Bestellinformation Ordering Information Typ Type Bestellnummer Ordering Code LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 LRTB C9TP-CWD5-1+D5E7-25+A7CW-49 Q65110A8879 Q65111A2182 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen CW, C5, C7, C9, DW oder D5 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, -4 oder -5 enthalten ist (siehe Seite 8 fur nahere Information). Z.B.:LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 means that only one group CW, C5, C7, C9, DW or D5 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 means that only 1 wavelength group -2, -3, -4 or -5 will be shippable (see page 8 for explanation). E.g. LRTB C9TP-CWD5-1+D5E7-25+A9C5-49 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2010-12-02 2 LRTB C9TP Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values red Einheit Unit true green blue Betriebstemperatur (auf PC-Board FR4/G30) Operating temperature range (on PC-Board FR4/G30) Top - 40 ... + 110* C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 150 C 30 250 mA Durchlassstrom Forward current (TS=25C) (min.) IF (max.) IF Stostrom Surge current tp = 10 s, D = 0.005, TS=25C IFM 1000 Sperrspannung2) Seite 25 Reverse voltage2) page 25 (TS=25C) VR 12 750 750 5 mA V *auf Grund von unterschiedlichen thermischen Ausdehnungskoeffizienten nicht empfehlenswert fur MCPCB on MCPCB not recommended due to thermal mismatch issue 2010-12-02 3 LRTB C9TP Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 140 mA Dominantwellenlange3) Seite 25 Dominant wavelength3) page 25 IF = 140 mA Symbol Symbol Werte Values Einheit Unit red true green blue (typ.) peak 632 523 465 nm (min.) (typ.) (max.) dom 619 625 631 518 528* 544 459 470* 476.5 nm nm nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 140 mA (typ.) 18 33 25 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung4) Seite 25 Forward voltage4) page 25 IF = 140 mA (min.) (typ.) (max.) VF VF VF 1.9 2.1 2.65 2.9 3.4 4.1 2.9 3.3 4.1 V V V Sperrstrom Reverse current VR = 5 V (blue / true green); 12 V (red) (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 A A Warmewiderstand Thermal resistance Sperrschicht/Lotpad 1 chip on Junction/solder point 1 chip on (typ.) (max.) Rth JS Rth JS 41 55 K/W K/W Sperrschicht/Lotpad 3 chip on Junction/solder point 3 chip on (typ.) (max.) Rth JS Rth JS 50** 82** K/W K/W * Einzelgruppen siehe Seite 8 Individual groups on page 8 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2010-12-02 4 LRTB C9TP Farbortgruppen5) Seite 25 Chromaticity Coordinate Groups5) page 25 0.9 0.8 0.7 7 OHA04233 520 530 540 510 550 505 2 3 4 5 true green 0.6 560 570 500 0.5 0.4 0.3 0.2 495 490 485 8 blue 480 9 76 0.1 5 4 460 0 0 0.1 0.2 0.3 2010-12-02 580 590 600 610 620 1 630 red 0.4 5 0.5 0.6 0.7 0.8 0.9 LRTB C9TP Gruppe Group Cx 2 3 4 5 1 Cy Gruppe Group Cx Cy 4 0.109 0.739 0.146 0.029 0.148 0.670 0.157 0.047 0.178 0.694 0.152 0.058 0.148 0.763 0.139 0.038 0.139 0.757 0.142 0.034 0.171 0.688 0.155 0.053 0.206 0.695 0.149 0.065 0.184 0.757 0.135 0.044 0.173 0.759 0.138 0.039 0.198 0.692 0.151 0.059 0.238 0.682 0.145 0.075 0.221 0.743 0.129 0.053 0.209 0.748 0.134 0.046 0.228 0.685 0.149 0.067 0.271 0.665 0.141 0.087 0.260 0.723 0.123 0.065 0.689 0.310 0.129 0.056 0.677 0.311 0.145 0.078 0.696 0.292 0.137 0.103 0.709 0.291 0.118 0.081 0.122 0.068 0.140 0.090 0.132 0.121 0.110 0.099 5 6 7 8 9 Anm.: Note: Die Farbkoordinaten des Mischlichtes konnen innerhalb des gekennzeichneten Bereichs des Farbdreiecks erwartet werden. The color coordinates of the mixed light can be expected within the marked area of the color triangle 2010-12-02 6 LRTB C9TP Floating Bins red CW = 2.800... 4.500 [mcd] C5 = 3.153 ... 5.000 mcd] C7 = 3.550... 5.600 [mcd] C9 = 4.000... 6.300 [mcd] DW = 4.500.. 7.100 [mcd] D5 = 5.000... 8.000 [mcd] Floating Bins true green D5 = 5.020... 7.994 [mcd] D7 = 5.600 ... 9.000 [mcd] D9 = 6.300 ... 10.000 [mcd] EW = 7.100 ... 11.200 [mcd] E5 = 8.000 ... 12.000 [mcd] E7 = 9.000 ... 14.000 [mcd] Floating Bins blue A7 = 1.400... 2.240 [mcd] A9 = 1.590... 2.500 [mcd] BW = 1.800... 2.800 [mcd] B5 = 2.010... 3.150 [mcd] B7 = 2.440... 3.550 [mcd] B9 = 2.500... 4.000 [mcd] CW = 2.800... 4.500 [mcd] C5 = 3.150...5.000 [mcd] 2010-12-02 7 LRTB C9TP Wellenlangengruppen (Dominantwellenlange)3) Seite 25 Wavelength Groups (Dominant Wavelength)3) page 25 Gruppe Group true green Einheit Unit Gruppe Group min. max. 2 518 526 nm 3 524 532 4 530 5 536 blue Einheit Unit min. max. 4 459.0 463.5 nm nm 5 461.5 466.0 nm 538 nm 6 464.0 468.5 nm 544 nm 7 466.5 471.0 nm 8 469.0 473.5 9 471.5 476.0 Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: CW-1+DW-2+A79-3 Example: CW-1+DW-2+A9-3 Helligkeitsgruppe Helligkeitsgruppe Wellenlange Helligkeitsgruppe Wellenlange Brightness Group Wellenlange (keine Gruppierung) Wavelength (no grouping) Brightness Group Wavelength Brightness Group Wavelength (red) (red) (true green) (true green) (blue) (blue) 1 D5 2 A9 4 CW Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 2010-12-02 8 LRTB C9TP Relative spektrale Emission5) Seite 25 Relative Spectral Emission5) page 25 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 140 mA OHL02514 100 % I rel 80 V 60 red blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik5) Seite 25 Radiation Characteristic5) page 25 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2010-12-02 0.8 0.6 0.4 0 20 9 40 60 80 100 120 LRTB C9TP Durchlassstrom Forward Current IF = f (VF); TS = 25 C, red Durchlassstrom Forward Current IF = f (VF); TS = 25 C, true green Durchlassstrom Forward Current IF = f (VF); TS = 25 C, blue 2010-12-02 10 LRTB C9TP Relative Lichtstarke6) Seite 25 Relative Luminous Intensity6) page 25 V/V(140 mA) = f (IF); TS = 25 C; red Relative Lichtstarke6) Seite 25 Relative Luminous Intensity6) page 25 IV/IV(140 mA) = f (IF); TS = 25 C; true green Relative Lichtstarke6) Seite 25 Relative Luminous Intensity 6) page 25 V/V(140 mA) = f (IF); TS = 25 C; blue 2010-12-02 11 LRTB C9TP Relative Vorwartsspannung Relative Forward Voltage VF = VF - VF(25 C); IF = 140 mA, red Relative Vorwartsspannung Relative Forward Voltage VF = VF - VF(25 C); IF = 140 mA, true green Relative Vorwartsspannung Relative Forward Voltage VF = VF - VF(25 C); IF = 140 mA, blue 2010-12-02 12 LRTB C9TP Relative Lichtstarke Relative Luminous Intensity V/V(25 C)= f (Tj); IF = 140 mA, red Relative Lichtstarke Relative Luminous Intensity IV/IV(25 C) = f (Tj); IF = 140 mA, true green Relative Lichtstarke Relative Luminous Intensity IV/IV(25 C) = f (Tj); IF = 140 mA, blue 2010-12-02 13 LRTB C9TP Relative Dominante Wellenlange Relative Dominant Wavelength dom = f (IF); TS = 25 C; true green 2010-12-02 Relative Dominante Wellenlange Relative Dominant Wavelength dom = f (IF); TS = 25 C; blue 14 LRTB C9TP Relative Dominante Wellenlange Relative Dominant Wavelength dom = f (Tj); IF = 140 mA, red Relative Dominante Wellenlange Relative Dominant Wavelength dom = f (Tj); IF = 140 mA, true green Relative Dominante Wellenlange Relative Dominant Wavelength dom = f (Tj); IF = 140 mA, blue 2010-12-02 15 LRTB C9TP Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (1 chip on); red IF Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (3 chips on); red OHL04260 300 mA IF OHL04262 300 mA 250 250 200 200 150 150 100 100 50 50 Do not use current below 30 mA 0 0 20 40 60 80 Do not use current below 30 mA 0 C 120 0 20 40 60 80 TS TS Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (1 chip on); true green, blue IF Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (3 chips on); true green, blue OHL04259 300 mA IF OHL04261 300 mA 250 250 200 200 150 150 100 100 50 50 Do not use current below 30 mA 0 0 20 40 60 80 Do not use current below 30 mA 0 C 120 TS 2010-12-02 C 120 0 20 40 60 80 C 120 TS 16 LRTB C9TP Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (1 Chip on); red IF Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (1 Chip on); red OHL04253 1.1 A tP tP IF IF D= T T 0.9 0.6 0.5 0.4 0.3 0.5 0.4 0.3 0.1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (1 Chip on); true green, blue 0.6 0.5 0.4 1 IF T t 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 0.4 0.2 0.1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 IF T D= 0.5 0.3 tP D = TP 0.6 0.2 1 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2010-12-02 OHL04252 0.8 IF A 0.7 tP D= 0.5 0.3 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (1 Chip on); true green, blue OHL04251 t 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.6 0.2 D = TP T D= 0.7 0.2 0.8 IF A 0.7 IF D= T 0.8 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.7 tP tP 0.9 D= 0.8 OHL04254 1.1 A tp 17 LRTB C9TP Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (3 Chip on); red IF Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (3 Chip on); red OHL04257 1.1 A t tP IF IF D = TP T 0.9 0.6 0.5 0.4 0.3 IF D = TP T D= 0.8 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.7 t tP 0.9 D= 0.8 OHL04258 1.1 A 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.7 0.6 0.5 0.4 0.3 0.2 0.2 0.1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (3 Chip on); true green, blue OHL04255 0.8 IF A 0.7 t D = TP 0.6 0.5 0.4 1 IF T t D = TP 0.6 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.3 0.1 0.1 IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 0.4 0.2 tP D= 0.5 0.2 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2010-12-02 OHL04256 0.8 IF A 0.7 tP D= 0.5 0.3 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (3 Chip on); true green, blue 18 LRTB C9TP Mazeichnung6) Seite 25 Package Outlines6) page 25 C1 Cathode Red (R) A1 Anode Red (R) C2 Cathode True Green (T) A2 Anode True Green (T) C3 Cathode Blue (B) A3 Anode Blue (B) Gewicht / Approx. weight: 45 mg Gurtung / Polaritat und Lage6) Seite 25 Verpackungseinheit 1000/Rolle, o180 mm Method of Taping / Polarity and Orientation6) page 25 Packing unit 1000/reel, o180 mm 2010-12-02 19 LRTB C9TP Cathode/Collector Side o1.5 (0.059) 4.85 (0.191) 3.45 (0.136) 8 (0.315) 5 max. 1.2 (0.047) 12 (0.472) 2 (0.079) 1.75 (0.069) 4 (0.157) 5.5 (0.217) 1.5 (0.059) 0.3 (0.012) OHAY2958 Empfohlenes Lotpaddesign6) 7) Seite 25 Recommended Solder Pad6) 7) page 25 Reflow Loten Reflow Soldering 2.3 (0.091) 2 (0.079) 4.6 (0.0.181) 3.1 (0.0.122) 1.5 (0.059) 1.75 (0.069) 2.85 (0.0.112) 1.4 (0.055) 1.1 (0.043) 3.4 (0.134) OHPY2921 2010-12-02 20 LRTB C9TP Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 50 0 100 150 200 250 s 300 t Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat* 25C to 150C 2C / sec 3C / sec Time ts from TSmin to TSmax (150C to 200C 100s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2C / sec 3C / sec ) Liquidus Temperture TL 217C Time tL above TL 80sec max. 100sec Peak Temperature TP 245C max. 260C Time tP within 5C of the specified peak temperature TP - 5K 20sec min. 10sec max. 30sec Ramp-down Rate* TP to 100C 3K / sec 6K / sec maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2010-12-02 21 LRTB C9TP Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto LRTBGFTG BIN1: U5-1-0-20 BIN2: V9-5-0-20 6-LEAD MULTILED BIN3: S7-6-0-20 RoHS Compliant Semiconductors (6P) BATCH NO: 1004109518 ML Temp ST 4 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1016 Pack: R33 DEMY 031 B_R999_1011.1241_R (X) PROD NO: 11055131 (Q)QTY: 4000 (G) GROUP: U5-1-0+V9-5-0+S7-6-0 OHA04614 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 180 (7) 2010-12-02 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 22 LRTB C9TP Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs d nta ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co ce is UR 24 6 da e y MI 40 be tim C h e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim s TO at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da % ure ba ed low ba Le ve mo ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > , Mo se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e 1 l Flo If al ref tim ve l 2 2a 4. se d l ve 3 Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo Barcode label N TIO U A C M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label 01 Y M DE 18 R -1 Q + -1 P : UP RO G ) C: 00 : D/ D) 20 (9 : NO TY O H TC 3G BA P) : 12 (6 T LO T) (1 D PR ) (X M DE 18 : UP (G ) G RO P -1 + Q R -1 u L lt S iT Y O T P 67 L 6 8 01 C: 99 D/ AM 21 00 (9 D) 20 00 TY : 12 SR (Q )Q H 5 14 2 11 00 O O (X ) PR D NO : S TC H G BA 23 P) (6 NO :1 (1 T) LO T O S : 34 21 em R ic AM o n O d u p ct to o rs NO 44 M 5 14 2 110 0 Y E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Muster 34 : 8 2199 2100 )Q S S em R ic AM o n O d u p ct to o H rs NO . RH 0% /6 C 12 ty e _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e r th tim r oo 23 wi nt tim e at l wi fa r Fl oo tim s at at ale C at e. ica Fl th oo r th ur el nt Fl oo on es uiv if: read ed l 4 5 Fl , lab m ide eq low l oc ve vic is ingen be or de 24 l 5a6 pr ve Le de nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al d Le r en re tu re e re 10 ois tim se fo tu re ale op se fo > , M r se ois 3 is , is ha se M ois tu nk be oo . 03 nk g rd M ois in Fl RH g, r-p bla in DM ba po If blath % kin Ca life is (if . ar ST p. wi 10 baator et Jelf r th va Ye ar ks s m _ < m ed 1 Ye ee ur d, C iredic t Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e 4 8 ou re ed re ty is qu JE 2. bo e M or tim 16 re C/ : e es idi 2b r a) St tim mor is IP ed r oo tim e vic b) g e r Hu Fl en oo tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 2 Fl If al re tim ve l 4. se d l 2a3 ve Le g an ve l Le re Ba te Le ve tu re Le tu Da ois re tu re M ois M ois tu M ois M OI M TO OP NO idi ag (Q e el selab . , H) nk de co (R bla r ba d ). O If m hu ive (G L E V LE re lat ra ck re 30 Nns IVEORS inf pa % k ai IT of to 90 ea d ntNS CT < ns (p TIO or d , cteg DU itio U g EcoSE an bje C sin nd ON 5 C su es A ba IC co UR M 40 be oc ry CThisSTSE C < ll pr cto 44 M u L lt S iT Y O T67 P L 6 Muster E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Breite / Width 200 5 (7,874 0,1968) 2010-12-02 Lange / length Hohe / height 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 23 OHA02044 LRTB C9TP Revision History: 2010-12-02 Previous Version: 2010-10-04 Page Subjects (major changes since last revision) Date of change all Preliminary Data Sheet 2009-07-28 2, 6, 7, 8 ordering code changed 2009-10-14 4, 8 Dominant wavelength: Color blue: groups 8 and 9 removed 2009-10-14 5, 6 Chromaticity Coordinate Groups: Color blue: groups 8 and 9 removed 2009-10-14 2, 6, 7, 8 ordering code changed 2010-02-26 4, 8 Dominant wavelength: Color blue: groups 8 and 9 added 2010-02-26 5, 6 Chromaticity Coordinate Groups: Color blue: groups 8 and 9 added 2010-02-26 23 OS-IN-2010-032 2010-10-04 all Final datasheet created 2010-12-02 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components8) page 25 may only be used in life-support devices or systems9) page 25 with the express written approval of OSRAM OS. 2010-12-02 24 LRTB C9TP Funoten: 1) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 3) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). 4) Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3) 5) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 6) Mae werden wie folgt angegeben: mm (inch) 7) Gehause halt TTW-Lothitze aus nach CECC 00802 8) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 9) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 2) Driving the LED in reverse direction is suitable for short term application. 3) The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). 4) The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). 5) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Dimensions are specified as follows: mm (inch) 7) Package able to withstand TTW-soldering heat acc. to CECC 00802 8) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 1) Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2010-12-02 25