DC/DC Converters TEN 3WIN Series, 3 Watt CB Scheme IEC 60950-1 UL 60950-1 Features Ultra wide 4 : 1 input range Input filter to meet EN 55032, Class A and FCC, level A without external components Extended operating temperature range -40C to 85C Models with 1'500 VDC and 3'000 VDC I/O isolation (functional insulation) DIP-24 package High reliability, MTBF >1.0 Mio. h 3-year product warranty The TEN 3WIN Series is a drop in replacement of the prevalent TEN 3WI Series. The up-to date design enables a cost reduction without any compromise to reliability and function. They come with an internal filter to meet EN55032 class A without external components. Increased EMC immunity and extended operating temperature range of -40C to 85C make these converters an ideal solution for cost critical but demanding applications. With the standard pinning it is a drop in replacement for common 3 Watt converters in DIP24 package. Models Ordercode 1500 VDC isolation 3000 VDC isolation TEN 3-2410WIN TEN 3-2411WIN TEN 3-2412WIN TEN 3-2413WIN TEN 3-2415WIN TEN 3-2421WIN TEN 3-2422WIN TEN 3-2423WIN TEN 3-4810WIN TEN 3-4811WIN TEN 3-4812WIN TEN 3-4813WIN TEN 3-4815WIN TEN 3-4821WIN TEN 3-4822WIN TEN 3-4823WIN TEN 3-2411WIN-HI TEN 3-2412WIN-HI TEN 3-2413WIN-HI TEN 3-2415WIN-HI TEN 3-2421WIN-HI TEN 3-2422WIN-HI TEN 3-2423WIN-HI TEN 3-4811WIN-HI TEN 3-4812WIN-HI TEN 3-4813WIN-HI TEN 3-4815WIN-HI TEN 3-4821WIN-HI TEN 3-4822WIN-HI TEN 3-4823WIN-HI http://www.tracopower.com Input voltage range 9.0 - 36 VDC (nominal 24 VDC) 18 - 75 VDC (nominal 48 VDC) Output voltage 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC 5.0 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 5.0 VDC 12 VDC 15 VDC Output current max. 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA Efficiency max. 77 % 79 % 82 % 83 % 81 % 80 % 82 % 82 % 77 % 80 % 83 % 84 % 82 % 80 % 82 % 82 % Page 1 of 4 DC/DC Converters TEN 3WIN Series 3 Watt Input Specifications Input current no load 24 Vin models 30 mA typ. 48 Vin models 20 mA typ. Start-up voltage 24 Vin models: 9.0 VDC (or lower) 48 Vin models: 18 VDC (or lower) Under voltage shut down (lock-out circuit) 24 Vin models: 8.5 VDC max. 48 Vin models: 17.5 VDC max. Surge voltage (1 s max.) 24 Vin models 50 V max. 48 Vin models 100 V max. Reflected ripple current 24 Vin models 15 mA typ 48 Vin models 10 mA typ. EMC emissions EN 55032 class A (without external components) EMC immunity EN 55024 - ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A - Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A - Fast transient / surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 1 kV, perf. criteria A - External input capacitor 200 F, 100 V, ESR 48 mOhm - Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Short circuit input power 2000 mW max. Internal power dissipation 1200 mW max. Output Specifications Voltage set accuracy 2 % max. Regulation - Input variation (Vin min. to Vin max.) 1.0 % max. - Load variation (0 - 100 %) single output models 1.0 % max. dual output models 2.0 % max. (balanced load) Minimum load not required Ripple and noise (20 MHz bandwidth) 70 mVpk-pk max Transient response time (25% load step change) 500 s max. Transient response deviation (25% load step change) 5 % max. Temperature coefficient 0.02 %/K Current limitation >120 % of Iout max., constant current Short circuit protection continuous, automatic recovery http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 3WIN Series 3 Watt Output Specifications (continued) Capacitive load 3.3 5.0 12 15 24 5.0 12 15 Vout Vout Vout Vout Vout Vout Vout Vout models: models: models: models: models: models: models: models: 680 F max. 470 F max. 330 F max. 220 F max. 100 F max. 220 F max (each output) 150 F max. (each output) 100 F max. (each output) General Specifications Temperature ranges - Operating (natural convection cooling 20 LFM) -40C to +85C - Case temperature +100C max. - Storage -55C to +125C Derating 3.3 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 F, at +25C, ground benign) >1 Mio. h Isolation voltage (60 s) - Input/Output 1'500 VDC or 3`000 VDC Isolation capacitance - Input/Output 300 pF max. Isolation resistance - Input/Output (500 VDC) >1`000 M Ohm Switching frequency 90 kHz min. (pulse frequency modulation PFM) Safety standards cUL/UL 60950-1, IEC/EN 60950-1 Safety approvals - CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011 ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011 - CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009 - Certification documents www.tracopower.com/overview/ten3win Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 3WIN Series 3 Watt Physical Specifications Casing material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Pin material copper alloy with gold plated subplate Weight 12.8 g (0.45 oz) Soldering temperature 260C / 10 s max. Outline Dimensions Pin-Out 11 2.54 (0.1) 4.5 15.24 20.3 14 (0.6) 10.2 (0.4) 4.5 (0.18) (0.1) 16 2.54 23 22 15.24 Bottom view (0.8) 9 (0.6) 2 3 Pin Single Dual 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No pin Common 11 ntc -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) ntc = not to connect 5.08 (0.2) 22.86 (0.9) (0.18) 31.8 (1.25) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Pin pich tolerances 0.25 (0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. March 28. 2018 Page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEN 3-4813WINHI TEN 3-2423WINHI TEN 3-4823WINHI TEN 3-2422WINHI TEN 3-4812WINHI TEN 34822WINHI TEN 3-2411WINHI TEN 3-4815WINHI TEN 3-2415WINHI TEN 3-2413WINHI TEN 3-2412WINHI TEN 3-2421WINHI TEN 3-4821WINHI TEN 3-4811WINHI