Solderless terminals PIN Non-insulated F D d1 d2 Brazed seam E Actual Refer to page 149 for actual size of the terminal. (except for PC-1.25 F-10, PC-1.25 F-9 & PC-2 F-7) E42024 26 to 22 (0.2 to 0.5) Part No. o d2 L F E oD o d1 Material Thickness 1.2 (.047) 14.0 (.551) 10.0 (.394) 4.0 (.157) 2.2 (.087) 1.0 (.039) 0.5 (.020) o 17.0 (.669) 12.0 (.472) 15.0 (.591) 10.0 (.394) 14.0 (.551) 9.0 (.354) 5.0 (.197) 3.4 (.134) 1.6 (.063) 5.0 (.197) 4.1 (.161) Standard PC-0.5 PC-1.25 22 to 16 (0.25 to 1.65) 16 to 14 (1.04 to 2.63) Tool No. Dimensions mm (in.) Applicable Wire AWG# (mm2) YHT-2622 YHT-2216 YA-1 YA-2 YA-4 BCT-0514 File No.: d2 L PC-1.25 F-10 1.9 (.075) PC-1.25 F- 9 PC-1.25 F- 7 12.0 (.472) 7.0 (.276) PC-2 17.0 (.669) 12.0 (.472) 22.0 (.866) 17.0 (.669) 14.0 (.551) 9.0 (.354) PC-2 F-17 PC-2 F- 9 1.9 (.075) 12.0 (.472) 7.0 (.276) PC-2 F- 7 2.7 (.106) 6.0 (.236) 20.0 (.787) 14.0 (.551) 12 to 10 (2.63 to 6.64) PC-5.5 5.7 (.224) Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. PC-2 -->WSPC-2). 2) Delivery lead times may vary depending on the product. Contact JST for details. o o Qty/box o 1,000 0.8 (.031) o o o o o 1,000 2.3 (.091) 0.8 (.031) o o o o o 1,000 3.6 (.142) 1.0 (.039) o o o o o 1,000 Solderless terminals D D d2 d2 PIN Vinyl-insulated F F L d2 d2 L STRAIGHT Applicable Wire AWG# (mm2) 26 to 22 (0.2 to 0.5) 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) FLARED E42024 Standard Straight Tool No. Dimensions mm (in.) Part No. Flared o d2 L F 1.2 (.047) 18.0 (.709) 10.0 (.394) 21.0 (.827) 12.0 (.472) 19.0 (.748) 10.0 (.394) 18.0 (.709) 9.0 (.354) VPC-0.5 FVPC-0.5 VPC-1.25 FVPC-1.25 VPC-1.25 F-10 FVPC-1.25 F-10 VPC-1.25 F- 9 FVPC-1.25 F- 9 VPC-1.25 F- 7 FVPC-1.25 F- 7 16.0 (.630) 7.0 (.276) VPC-2 FVPC-2 21.0 (.827) 12.0 (.472) VPC-2 F-17 FVPC-2 F-17 VPC-2 F- 9 FVPC-2 F- 9 1.9 (.075) 1.9 (.075) 26.0(1.024) 17.0 (.669) 18.0 (.709) 9.0 (.354) oD YNT-2622 YNT-2216 YNT-1614 YNT-1210S YA-1 YA-2 YA-4 BCT-0514 File No.: Color Material Thickness 0.5 (.020) Yellow o 8.0 (.315) Str. 1.9 (.075) Fld. 2.9 (.114) 9.0 (.354) 3.2 (.126) 4.0 (.157) 0.8 (.031) Red 9.0 (.354) 3.9 (.154) 4.5 (.377) 0.8 (.031) Blue 16.0 (.630) 7.0 (.276) VPC-2 F- 7 FVPC-2 F- 7 12 to 10 5.4 6.8 13.5 2.7 VPC-5.5 FVPC-5.5 14.0 (.551) (.531) (.213) (.268) 27.5(1.083) (2.63 to 6.64) (.106) Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. FVPC-2 -->FVWSPC-2). 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 51 3) Delivery lead times may vary depending on the product. Contact JST for details. 1.0 (.039) Yellow o o o o o Qty/box o 1,000 o o o o 1,000 o o o o 1,000 o o 500