TQ 2-pole 5 mm Surface Mount Relay, JIS C0806 compliant 3. Suitable for SMD automatic insertion (SA type) With a height of 5.6 mm .220 inch, the relays meet JIS C 0806 specifications. 4. High density mounting possible High-efficiency magnetic circuits ensure low magnetic flux leakage. Because characteristics are little changed by proximity mounting, highdensity mounting is possible. 5. The use of gold-clad twin crossbar contacts ensures high contact reliability. 6. DIL terminal array enables use of IC sockets 7. Low thermal electromotive force As well as low power consumption of 140 mW, use of a structure with separate coil and contact sections has reduced thermal electromotive force to the low level of approximately 5 V. Surface mount types achieve approximately 2 V. 8. Latching types also available 9. Self-clinching terminal also available RoHS compliant FEATURES 1. Flat compact size 14.0(L) x 9.0(W) x 5.0(H) .551(L) x .354(W) x .197(H) 2. Nominal operating power: High sensitivity of 140mW (2 Form C single side stable type) By using the highly efficient polar magnetic circuit "seesaw balance mechanism", a nominal operating power of 140 mW (minimum operating power of 79 mW) has been achieved. TQ RELAYS 10. A range of surface-mount types is also available. SA: Low-profile surface-mount terminal type SL: High connection reliability surfacemount terminal type SS: Space saving surface-mount terminal type 11. M.B.B. contact types available TYPICAL APPLICATIONS 1. Communications 2. Measurement equipment 3. OA equipment 4. Industrial machines ORDERING INFORMATION TQ 2 Contact arrangement 2: 2 Form C Terminal shape Nil: Standard PC board terminal H: Self-clinching terminal SA: SA type SL: SL type SS: SS type Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching MBB function Nil: Standard (B.B.M.) type 2M: 2M.B.B. type Nominal coil voltage (DC)* 1.5 (SMD only), 3, 4.5, 5, 6, 9, 12, 24, 48V Packing style Nil: Tube packing X: Tape and reel (picked from 1/2/3/4/5-pin side) Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side) Notes: 1. *48 V coil type: Single side stable only 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB14E 201209-T TQ TYPES Standard PC board terminal and self-clinching terminal 1. Standard (B.B.M.) type 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2-3V TQ2-4.5V TQ2-5V TQ2-6V TQ2-9V TQ2-12V TQ2-24V TQ2-48V 1 coil latching Part No. TQ2-L-3V TQ2-L-4.5V TQ2-L-5V TQ2-L-6V TQ2-L-9V TQ2-L-12V TQ2-L-24V -- 2 coil latching Part No. TQ2-L2-3V TQ2-L2-4.5V TQ2-L2-5V TQ2-L2-6V TQ2-L2-9V TQ2-L2-12V TQ2-L2-24V -- 1 coil latching Part No. TQ2H-L-3V TQ2H-L-4.5V TQ2H-L-5V TQ2H-L-6V TQ2H-L-9V TQ2H-L-12V TQ2H-L-24V -- 2 coil latching Part No. TQ2H-L2-3V TQ2H-L2-4.5V TQ2H-L2-5V TQ2H-L2-6V TQ2H-L2-9V TQ2H-L2-12V TQ2H-L2-24V -- Standard packing (2 Form C): Tube: 50 pcs.; Case: 1,000 pcs. 2) Self-clinching terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2H-3V TQ2H-4.5V TQ2H-5V TQ2H-6V TQ2H-9V TQ2H-12V TQ2H-24V TQ2H-48V Note: Types ("-3" to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered. However, please contact us if you need parts for use in low level load. 2. M.B.B. type 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TQ2-2M-3V TQ2-2M-4.5V TQ2-2M-5V TQ2-2M-6V TQ2-2M-9V TQ2-2M-12V TQ2-2M-24V Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Self-clinching terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TQ2H-2M-3V TQ2H-2M-4.5V TQ2H-2M-5V TQ2H-2M-6V TQ2H-2M-9V TQ2H-2M-12V TQ2H-2M-24V Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. Notes: 1. Latching types are available by request. Please consult us for details. 2. UL/CSA approved (UL file No.:E 43149, CSA file No.: LR26550) 3. Types ("-1" to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered. However, please contact us if you need parts for use in low level load and low thermal power. ASCTB14E 201209-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ TQ Surface-mount terminal 1) Tube packing Contact arrangement Nominal coil voltage 2c 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2S-1.5V TQ2S-3V TQ2S-4.5V TQ2S-5V TQ2S-6V TQ2S-9V TQ2S-12V TQ2S-24V TQ2S-48V 1 coil latching Part No. TQ2S-L-1.5V TQ2S-L-3V TQ2S-L-4.5V TQ2S-L-5V TQ2S-L-6V TQ2S-L-9V TQ2S-L-12V TQ2S-L-24V -- 2 coil latching Part No. TQ2S-L2-1.5V TQ2S-L2-3V TQ2S-L2-4.5V TQ2S-L2-5V TQ2S-L2-6V TQ2S-L2-9V TQ2S-L2-12V TQ2S-L2-24V -- : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Contact arrangement Nominal coil voltage 2 Form C 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2S-1.5V-Z TQ2S-3V-Z TQ2S-4.5V-Z TQ2S-5V-Z TQ2S-6V-Z TQ2S-9V-Z TQ2S-12V-Z TQ2S-24V-Z TQ2S-48V-Z 1 coil latching Part No. TQ2S-L-1.5V-Z TQ2S-L-3V-Z TQ2S-L-4.5V-Z TQ2S-L-5V-Z TQ2S-L-6V-Z TQ2S-L-9V-Z TQ2S-L-12V-Z TQ2S-L-24V-Z -- 2 coil latching Part No. TQ2S-L2-1.5V-Z TQ2S-L2-3V-Z TQ2S-L2-4.5V-Z TQ2S-L2-5V-Z TQ2S-L2-6V-Z TQ2S-L2-9V-Z TQ2S-L2-12V-Z TQ2S-L2-24V-Z -- : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Note: Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. RATING Standard PC board terminal and self-clinching terminal 1. Coil data [Standard (B.B.M.) type] 1) Single side stable (2 Form C) Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 140mW 150%V of nominal voltage 3V DC 46.7mA 64.3 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 31.1mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA 144.6 178 257 579 1,028 2,880 200mW 6.25mA 7,680 300mW 120%V of nominal voltage Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 100mW 150%V of nominal voltage 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 48V DC 2) 1 coil latching (2 Form C) Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 3V DC 33.3mA 90 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 22.2mA 20mA 16.7mA 11.1mA 8.3mA 6.3mA 202.5 250 360 810 1,440 3,840 75%V or less of nominal voltage* (Initial) Panasonic Corporation 75%V or less of nominal voltage* (Initial) Automation Controls Business Unit 150mW industrial.panasonic.com/ac/e/ ASCTB14E 201209-T TQ 3) 2 coil latching (2 Form C) Nominal coil voltage Set voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Set coil Reset coil Reset voltage (at 20C 68F) Coil resistance [10%] (at 20C 68F) Set coil Reset coil 3V DC 66.7mA 66.7mA 45 45 4.5V DC 5V DC 6V DC 9V DC 12V DC 44.4mA 40mA 33.3mA 22.2mA 16.7mA 44.4mA 40mA 33.3mA 22.2mA 16.7mA 101.2 125 180 405 720 101.2 125 180 405 720 12.5mA 12.5mA 1,920 1,920 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) 24V DC Nominal operating power Max. applied voltage (at 20C 68F) Set coil Reset coil 200mW 200mW 150%V of nominal voltage 300mW 300mW 120%V of nominal voltage [M.B.B. type] Nominal coil voltage Pick-up voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Drop-out voltage (at 20C 68F) Coil resistance [10%] (at 20C 68F) 3V DC 66.7mA 45 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 44.4mA 40mA 33.3mA 22.2mA 16.7mA 8.3mA 101 125 180 405 720 2,880 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) Nominal operating power Max. applied voltage (at 20C 68F) 200mW 150%V of nominal voltage *Pulse drive (JIS C 5442-1986) 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*2 Specifications 2 Form C, 2 Form D (M.B.B.) Max. 50m (By voltage drop 6 V DC 1A) Ag+Au clad 1 A 30 V DC, 0.5 A 125 V AC*1 (resistive load) 30 W (DC), 62.5 V A (AC)*1 (resistive load) 110 V DC, 125 V AC*1 1A 10A 10mV DC Single side stable Nominal operating power 1 coil latching 2 coil latching Standard (B.B.M) type: 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) M.B.B. type: 200 mW 100 mW (3 to 12 V DC), 150 mW (24 V DC) 200 mW (3 to 12 V DC), 300 mW (24 V DC) Insulation resistance (Initial) Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. Between open contacts Electrical characteristics Breakdown voltage (Initial) Between contact and coil Between contact sets Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics Expected life Conditions Shock resistance Functional Destructive Functional Destructive Mechanical (at 180 cpm) Vibration resistance Electrical (at 20 cpm) Conditions for operation, transport and storage*3 Max. operating speed (at rated load) Unit weight Standard (B.B.M) type: 750 Vrms for 1min. (Detection current: 10 mA), M.B.B. type: 300 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1min. (Detection current: 10 mA) 1,000 Vrms for 1min. (Detection current: 10 mA) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107 Standard (B.B.M) type: Min. 2x105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) M.B.B. type: Min. 105 (1 A 30 V DC resistive) Standard (B.B.M) type: Ambient temperature: -40C to +70C -40F to +158F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) M.B.B. type: Ambient temperature: -40C to +50C -40F to +122F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1.5 g .053 oz Notes: *1 AC is standard (B.B.M) type only. *2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level]) *3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). ASCTB14E 201209-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ TQ Surface-mount terminal 1. Coil data 1) Single side stable Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 140mW 150%V of nominal voltage 1.5V DC 93.8mA 16 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA 64.3 145 178 257 579 1,028 2,880 6.3mA 7,680 300mW 120%V of nominal voltage Nominal operating current (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 70mW 150%V of nominal voltage 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 48V DC 200mW 2) 1 coil latching Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 1.5V DC 46.9mA 32 3V DC 4.5V DC 5V DC 6V DC 9V DC 23.3mA 15.6mA 14mA 11.7mA 7.8mA 128.6 289.3 357 514 1,157 5.8mA 4.2mA 2,057 5,760 100mW Coil resistance [10%] (at 20C 68F) Nominal operating power 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) 12V DC 24V DC 3) 2 coil latching Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) Nominal operating current (at 20C 68F) Set coil Reset coil Set coil Reset coil 1.5V DC 93.8mA 93.8mA 16 16 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA 64.3 145 178 257 579 1,028 2,880 64.3 145 178 257 579 1,028 2,880 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) Set coil Reset coil 140mW 140mW 200mW 200mW Max. applied voltage (at 20C 68F) 150%V of nominal voltage *Pulse drive (JIS C 5442-1986) Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB14E 201209-T TQ 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Nominal operating power Specifications 2 Form C Max. 75 m (By voltage drop 6 V DC 1A) AgNi type+Au clad 2 A 30 V DC, 0.5 A 125 V AC (resistive load) 60 W (DC), 62.5 VA (AC) (resistive load) 220 V DC, 125 V AC 2A 10A 10mV DC Single side stable 1 coil latching 2 coil latching 140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) 70 mW (1.5 to 12 V DC), 100 mW (24 V DC) 140 mW (1.5 to 12 V DC), 200 mW (24 V DC) Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. Insulation resistance (Initial) Electrical characteristics Breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) Surge breakdown voltage (Initial) Between open contacts Between contacts and coil 1,500 V (10x160s) (FCC Part 68) 2,500 V (2x10s) (Bellcore) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 108 (at 180 cpm) Min. 105 (2 A 30 V DC resistive), Min. 2x105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm) Ambient temperature: -40C to +85C -40F to +185F, Max. -40C to +70C (2A) Max. -40F to +158F (2A); Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 2 g .071 oz Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Mechanical characteristics Expected life Conditions Electrical Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level]) *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). ASCTB14E 201209-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ TQ REFERENCE DATA Standard PC board terminal and self-clinching terminal 1. Maximum switching capacity 2. Life curve 3. Mechanical life Ratio against the rated voltage, %V DC load (cos=1) AC load (cos=1) No. of operations, x104 Switching current, A Tested sample: TQ2-12V, 10 pcs. 30 V DC resistive load 100 1.0 0.5 0.4 0.3 125 V AC resistive load 10 0.2 30 0 100 200 Switching voltage,V 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 Drop-out voltage 30 Max. 20 Min. 10 0 0.5 1.0 Switching current, A 10 100 1,000 10,000 No. of operations, x104 4.-(1) Electrical life (DC load) 4.-(2) Electrical life (AC load) Tested sample: TQ2-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm Tested sample: TQ2-12V, 6 pcs. Condition: 0.5 A 125 V AC resistive load, 20 cpm Change of contact resistance 100 90 90 Pick-up voltage Max. 70 Min. 60 50 40 Drop-out voltage Max. 30 20 Min. 80 70 60 50 Max. 40 Min. 30 20 10 10 0 5 10 15 No. of operations, x104 20 0 Change of contact resistance 5 10 15 No. of operations, x104 50 40 Max. 30 Min. Max. Min. 60 50 40 Drop-out voltage Max. 30 Min. 20 10 0 5 No. of operations, x104 10 Tested sample: TQ2-12V, 5 pcs. Temperature rise, C 60 Pick-up voltage 70 6. Ambient temperature characteristics 70 70 80 Tested sample: TQ2-12V Measured portion: Inside the coil Ambient temperature: 30C 86F 90 80 20 90 5. Coil temperature rise (2C) 100 Contact resistance, m 100 Variation ratio,% 80 Change of pick-up and drop-out voltage Ratio against the rated voltage, %V 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage Nominal coil voltage 3 to 12 V DC type 24 V DC type 60 1A 50 40 30 Drop-out 20 voltage x x 10 40 1A 0A -40 -20 0 20 40 30 -10 20 Pick-up voltage 60 80 Ambient temperature,C -20 20 10 10 0 5 No. of operations, x104 0 10 7.-(1) High-frequency characteristics (Isolation) -30 -40 100 110 120 130 140 150 Coil applied voltage, %V 7.-(2) High-frequency characteristics (Insertion loss) 8. Malfunctional shock (single side stable) Tested sample: TQ2-12V, 6 pcs. , Insertion loss, dB Isolation, dB ,Z XX 100 50 Z Y, Y Y 980m/s2 980m/s2 Z 980m/s2 980m/s2 , Z 980m/s2 , X X 1.0 0.8 0.6 0.4 980m/s2 , Y 0.2 10 100 Frequency, MHz 1,000 Panasonic Corporation Deenergized condition Energized condition 0 10 100 Frequency, MHz Automation Controls Business Unit 1,000 industrial.panasonic.com/ac/e/ ASCTB14E 201209-T TQ 9.-(1) Influence of adjacent mounting 9.-(2) Influence of adjacent mounting 10. Contact reliability (1 mA 5 V DC resistive load) 10 ON Pick-up voltage Rate of change, % Rate of change, % Rate of change, % Rate of change, % Tested sample: TQ2-12V Condition: Detection level 10 W ON 0 -10 ON OFF OFF 10 Drop-out voltage 0 OFF -10 0 10 Pick-up voltage ON 70.0 50.0 30.0 0 -10 ON 10 10.0 5.0 OFF Drop-out voltage 2.0 1.0 0.5 0 OFF -10 5 .197 Inter-relay distance , mm inch m=2.15 =2.7x107 95% reliability limit = 7.6x106 (Weibull probability paper) 0.2 0.1 1.0 OFF 0 5 .197 Inter-relay distance ON F(t), % 99.9 99.0 95.0 10 100 No. of operations, x106 , mm inch 11. Actual load test (35 mA 48 V DC wire spring relay load) Change of pick-up and drop-out voltage 220 57 V DC 220 12. 0.1 A 53 V DC resistive load test Change of pick-up and drop-out voltage 90 80 Pick-up voltage 70 Max. Min. 60 50 40 30 Drop-out voltage Max. Min. 20 10 80 70 60 50 40 Max. 30 Min. 20 10 10 20 30 40 No. of operations, x104 50 0 10 20 30 40 No. of operations, x104 Change of contact resistance 100 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 30 Drop-out voltage 20 Max. Min. 10 0 500 1,000 1,500 Contact resistance, m Ratio against the rated voltage, %V 100 90 0 Wire spring relay Circuit diagram Change of contact resistance 100 Ratio against the rated voltage, %V 20Hz Contact resistance, m Circuit 90 80 70 60 Max. 50 40 30 Min. 20 10 2,000 0 500 No. of operations, x104 1,000 1,500 2,000 No. of operations, x104 13. Distribution of M.B.B. time Tested sample: TQ2-2M-5V, 85 pcs. 50 40 30 20 26 19 15 21 Terminal Nos. 2-3-4: ON - x: 105.6 s 3n-1: 163.8 s Min.: 23 s Max.: 243 s Terminal Nos. 7-8-9: ON - x: 115.6 s 3n-1: 167.3 s 30 Min.: 35 s Max.: 254 s 19 60 41 40 35 31 30 27 20 17 12 11 10 Terminal Nos. 2-3-4: OFF - x: 71.6 s 3n-1: 127.1 s Min.: 17 s Max.: 187 s Terminal Nos. 7-8-9: OFF - x: 80.7 s 3n-1: 156.7 s Min.: 29 s Max.: 298 s 50 10 6 10 ASCTB14E 201209-T 350 s max. Panasonic Corporation 10 50 100 150 ~ 300 s min. 2 ~ 300 1 ~ ~ 250 7 4 ~ ~ 200 200 250 300 s min. 50 100 150 200 250 300 350 s max. ~ ~ 150 ~ 100 150 100 0 ~ 50 50 ~ 10 4 200 250 ~ 0 ~ 2 ~ 60 Automation Controls Business Unit industrial.panasonic.com/ac/e/ 50 TQ Surface-mount terminal 1. Maximum switching capacity 2. Life curve 3. Mechanical life (mounting by IRS method) Ratio against the rated voltage, %V Tested sample: TQ2SA-12V, 10 pcs. No. of operations, x 104 Switching current, A 3.0 2.0 100 DC resistive load 1.0 AC resistive load 0.5 0.4 0.3 50 30 125V AC resistive load 30V DC resistive load 20 10 0.2 100 90 80 Pick-up voltage 70 Max. 60 Min. 50 40 Drop-out voltage 30 Max. 20 Min. 10 0 20 30 0 50 100 200 300 Contact voltage, V 0 1.0 2.0 Switching current, A IRS 1 10 100 1,000 10,000 4 No. of operations, x10 4.-(1) Electrical life (2 A 30 V DC resistive load) 4.-(2) Electrical life (0.5 A 125 V AC resistive load) Tested sample: TQ2SA-12V, 6 pcs. Operating speed: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method) Tested sample: TQ2SA-12V, 6 pcs Operating speed: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method) Change of contact resistance (mounting by IRS method) 80 Pick-up voltage 70 Max. Min. 60 50 40 Drop-out voltage 30 Max. 20 IRS 1 2 60 50 Max. 40 Min. 30 0 IRS 1 2 Max. 40 Min. 30 0A 50 2A 40 0A 30 20 4 5 6 7 8 0 9 10 4 7. Ambient temperature characteristics 8.-(1) High-frequency characteristics (Isolation) -40 -20 0 Rate of change, % Tested sample: TQ2SA-12V, 5 pcs. Min. IRS 1 2 3 4 5 6 7 8 9 10 No. of operations, x104 Operate time Release time 4 Max. Min. 3 2 0 100 110 120 130 140 150 Coil applied voltage, %V Max. Min. 70 80 100 110 120 90 Coil applied voltage, %V 8.-(2) High-frequency characteristics (Insertion loss) 40 20 Pick-up voltage x Drop-out voltage 20 40 60 80 Ambient temperature, C -20 Insertion loass, dB 3 No. of operations, x10 Isolation, dB 2 Max. 20 1 10 10 IRS 1 Drop-out voltage 30 5 2A Coil voltage DC 12V type DC 48V type 20 0 40 Tested sample: TQ2SA-12V, 6 pcs. Temperature rise, C 50 Min. 50 6. Operate/release time 60 Max. 60 0 3 4 5 6 7 8 9 10 No. of operations, x104 70 60 Pick-up voltage 70 Tested sample: TQ2SA-12V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F 90 70 80 5. Coil temperature rise 100 80 90 10 10 3 4 5 6 7 8 9 10 No. of operations, x104 Change of contact resistance (mounting by IRS method) Contact resistance, m 70 Operate and release time, ms 0 80 20 Min. 10 100 Ratio against the rated voltage, %V 90 Contact resistance, m 100 90 Ratio against the rated voltage, %V 100 100 50 1.0 0.8 0.6 0.4 0.2 -40 10 Panasonic Corporation 100 Frequency, MHz Automation Controls Business Unit 1,000 10 industrial.panasonic.com/ac/e/ 100 Frequency, MHz 1,000 ASCTB14E 201209-T TQ 10.-(1) Influence of adjacent mounting 10.-(2) Influence of adjacent mounting Tested sample: TQ2SA-12V, 6 pcs Tested sample: TQ2SA-12V, 5 pcs. Tested sample: TQ2SA-12V, 6 pcs. Deenergized condition Energized condition X 1000m/s2 Z' 1000m/s 2 1000m/s 2 Z 1000m/s 2 X' 1000m/s 2 Y' 10 ON ON Pick-up voltage 0 ON -10 Rate of change, % X' Y 1000m/s 2 Rate of change, % Z X Rate of change, % Z' Y Y' Rate of change, % 9. Malfunctional shock (single side stable) OFF OFF 10 Drop-out voltage 0 OFF -10 0 ON 10 Pick-up voltage 0 ON -10 ON OFF 10 Drop-out voltage 0 OFF -10 0 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch OFF 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch 11. Pulse dialing test (35 mA 48 V DC wire spring relay load) Tested sample: TQ2SA-12V, 6 pcs. Circuit 458 0.08 F 48 V DC 0.08 F TQ-SMD 3 relay 2 - 458 Wire spring relay Change of contact resistance (mounting by IRS method) 100 100 90 90 Contact resistance, m Ratio against the rated voltage, %V + Change of pick-up and drop-out voltage (mounting by IRS method) 80 Pick-up voltage 70 Max. 60 Min. 50 40 Drop-out voltage 30 Max. 20 Min. DIMENSIONS (mm inch) 60 50 40 Max. 30 Min. 10 IRS 10 20 30 40 No. of operations, x104 The CAD data of the products with a 0 50 CAD Data 2.54 .100 9 .354 10.16 .400 20 30 40 4 No. of operations, x10 50 10-1.0 dia. 10-.039 dia. 5 +0.4 -0.2 .197 +.016 -.008 2.54 .100 7.62 .300 3.5 .138 0.25 .010 2.54 .100 0.5 .020 7.62 .300 0.25 .010 Tolerance: 0.1 .004 Schematic (Bottom view) Self-clinching terminal (4.75) (.187) 14 .551 Single side stable 9 .354 5 +0.4 -0.2 .197 +.016 -.008 + 3.5 .138 0.25 .010 2.54 .100 0.5 .020 7.62 .300 General tolerance: 0.3 .012 ASCTB14E 201209-T 10 PC board pattern (Bottom view) Standard PC board terminal 14 .551 IRS mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. Standard PC board terminal and Self-clinching terminal 1) 2 Form C External dimensions CAD Data (4.75) (.187) 70 20 10 0 80 Panasonic Corporation 0.25 .010 1 2 3 4 1-coil latching 5 - - 1 2 3 4 2-coil latching 5 8 7 6 2 3 4 10 9 8 7 6 10 9 5 - - + + 10 9 1 + 8 7 6 Direction indication Direction indication Direction indication (Deenergized condition) (Reset condition) (Reset condition) Automation Controls Business Unit industrial.panasonic.com/ac/e/ TQ 2. Surface-mount terminal CAD Data External dimensions (General tolerance: 0.3 .012) Type 14 .551 Suggested mounting pad (Top view) (Tolerance: 0.1 .004) 1 .039 9 .354 5.6 .220 SA type 2.54 .100 9.56 .376 7.62 .300 11.50.5 .453.020 0.2 .008 0.5 .020 0.25 .010 4.9 .193 14 .551 14 .551 1 .039 9 .354 Max.7.5 .295 SL type 0.25 .010 4.9 .193 14 .551 9.56 .376 1 .039 9 .354 Max.7.5 .295 SS type 0.25 .010 4.9 .193 2.54 .100 1.84 .072 8.46 .333 7.62 .300 9.30.5 .366.020 0.5 .020 2.54 .100 2.54 .100 2.94 .116 7.62 .300 11.50.5 .453.020 0.5 .020 2.54 .100 2.54 .100 2.94 .116 Schematic (Top view) Single side stable - 10 9 8 7 1-coil latching 6 + + 10 9 8 7 2-coil latching 6 10 9 2 3 4 5 7 1 2 3 4 5 1 6 - - + - 1 8 + 2 3 4 5 Direction indication Direction indication Direction indication (Deenergized condition) (Reset condition) (Reset condition) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.1) stripe (ii) SL, SS type mm inch 0.4 .016 Relay polarity bar 2.0 (Z type) 1.5 +0.1 0 dia. .079 .059 +.004 dia. 0 16.0 .630 TQ-SMD relays Note) *SS type Stopper (green) 2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type mm inch 0.4 .016 Relay polarity bar 2.0 (Z type) 1.5 +0.1 0 dia. .079 .059 +.004 dia. 0 4.0 .157 TQ-SMD relays 16.0 .630 12.3 24.0 0.3 .484 .945 .012 (10.1 .398)* Tape coming out direction (2) Dimensions of plastic reel mm inch 1.75 .069 Tape coming out direction Panasonic Corporation C B 2.0 .079 14.6 .575 12.3 24.0 0.3 .484 .945 .012 A 21 dia. .827 dia. 80 1 dia. 3.150 .039 dia. 11.5 .453 6.3 0.2 .248 .008 .575 11.5 .453 7.8 0.2 .307 .008 Stopper (gray) 1.75 4.0 .069 .157 14.6 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 9.8 N {1 kgf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less 330 2 dia. 12.992 .079 dia. 13 dia. .512 dia. Automation Controls Business Unit Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines". industrial.panasonic.com/ac/e/ ASCTB14E 201209-T