* 1N5518-1 THRU 1N5546B-1 AVAILABLE IN JAN, JANTX AND JANTXV PER MIL-PRF-19500/437 * LOW REVERSE LEAKAGE CHARACTERISTICS 1N5518 thru 1N5546D and 1N5518B-1 thru 1N5546B-1 * LOW NOISE CHARACTERISTICS * DOUBLE PLUG CONSTRUCTION * METALLURGICALLY BONDED MAXIMUM RATINGS Junction and Storage Temperature: -65C to +175C DC Power Dissipation: 500 mW @ +50C Power Derating: 4 mW / C above +50C Forward Voltage @ 200mA: 1.1 volts maximum ELECTRICAL CHARACTERISTICS @ 25C JEDEC TYPE NUMBER NOMINAL ZENER VOLTAGE ZENER TEST CURRENT VZ@ 1ZT (NOTE 2) 1ZT (NOTE 1) ZZT @ 1ZT (NOTE 3) lR (NOTE 4) VOLTS mAdc OHMS Adc 26 24 22 18 22 5.0 3.0 1.0 3.0 2.0 20 20 20 20 10 MAX. ZENER IMPEDANCE B-C-D SUFFIX B-C-D SUFFIX MAXIMUM DC ZENER CURRENT MAXIMUM REVERSE LEAKAGE CURRENT VR = VOLTS NON & ASUFFIX 1ZM B-C-D SUFFIX MAX. NOISE DENSITY @1Z=250 A ND REGULATION FACTOR LOW VZ CURRENT VZ (NOTE 5) 1ZL B-C-DSUFFIX mAdc VOLTS mAdc 0.90 0.90 0.90 1.0 1.5 1.0 1.0 1.0 1.5 2.0 115 105 98 88 81 0.5 0.5 0.5 0.5 0.5 0.90 0.90 0.85 0.75 0.60 2.0 2.0 2.0 2.0 1.0 V/ HZ 1N5518B 1N5519B 1N5520B 1N5521B 1N5522B 3.3 3.6 3.9 4.3 4.7 1N5523B 1N5524B 1N5525B 1N5526B 1N5527B 5.1 5.6 6.2 6.8 7.5 5.0 3.0 1.0 1.0 1.0 26 30 30 30 35 2.0 2.0 1.0 1.0 0.5 2.0 3.0 4.5 5.5 6.0 2.5 3.5 5.0 6.2 6.8 75 68 61 56 51 0.5 1.0 1.0 1.0 2.0 0.65 0.30 0.20 0.10 0.05 0.25 0.25 0.01 0.01 0.01 1N5528B 1N5529B 1N5530B 1N5531B 1N5532B 8.2 9.1 10.0 11.0 12.0 1.0 1.0 1.0 1.0 1.0 40 45 60 80 90 0.5 0.1 0.05 0.05 0.05 6.5 7.0 8.0 9.0 9.5 7.5 8.2 9.1 9.9 10.8 46 42 38 35 32 4.0 4.0 4.0 5.0 10 0.05 0.05 0.10 0.20 0.20 0.01 0.01 0.01 0.01 0.01 1N5533B 1N5534B 1N5535B 1N5536B 1N5537B 13.0 14.0 15.0 16.0 17.0 1.0 1.0 1.0 1.0 1.0 90 100 100 100 100 0.01 0.01 0.01 0.01 0.01 10.5 11.5 12.5 13.0 14.0 11.7 12.6 13.5 14.4 15.3 29 27 25 24 22 15 20 20 20 20 0.20 0.20 0.20 0.20 0.20 0.01 0.01 0.01 0.01 0.01 1N5538B 1N5539B 1N5540B 1N5541B 1N5542B 18.0 19.0 20.0 22.0 24.0 1.0 1.0 1.0 1.0 1.0 100 100 100 100 100 0.01 0.01 0.01 0.01 0.01 15.0 16.0 17.0 18.0 20.0 16.2 17.1 18.0 19.8 21.6 21 20 19 17 16 20 20 20 20 20 0.20 0.20 0.20 0.25 0.30 0.01 0.01 0.01 0.01 0.01 LEAD MATERIAL: Copper clad steel. 1N5543B 1N5544B 1N5545B 1N5546B 25.0 28.0 30.0 33.0 1.0 1.0 1.0 1.0 100 100 100 100 0.01 0.01 0.01 0.01 21.0 23.0 24.0 28.0 22.4 25.2 27.0 29.7 15 14 13 12 20 20 20 20 0.35 0.40 0.45 0.50 0.01 0.01 0.01 0.01 THERMAL RESISTANCE: (ROJEC): 250 C/W maximum at L = .375 inch NOTE 1 No Suffix type numbers are +20% with guaranteed limits for only VZ, lR, and VF. Units with "A" suffix are +10% with guaranteed limits for VZ, lR, and VF. Units with guaranteed limits for all six parameters are indicated by a "B" suffix for +5.0% units, "C" suffix for +2.0% and "D" suffix for +1.0%. NOTE 2 Zener voltage is measured with the device junction in thermal equilibrium at an ambient temperature of 25C + 3C. NOTE 3 Zener impedance is derived by superimposing on 1ZT A 60Hz rms a.c. current equal to 10% of 1ZT. NOTE 4 NOTE 5 Reverse leakage currents are measured at VR as shown on the table. VZ is the maximum difference between VZ at lZT and VZ at lZL measured with the device junction in thermal equilibrium at the ambient temperature of +25C +3C. FIGURE 1 DESIGN DATA CASE: Hermetically sealed glass case. DO - 35 outline. LEAD FINISH: Tin / Lead THERMAL IMPEDANCE: (ZOJX): 35 C/W maximum POLARITY: Diode to be operated with the banded (cathode) end positive. MOUNTING POSITION: Any. 22 COREY STREET, MELROSE, MASSACHUSETTS 02176 PHONE (781) 665-1071 FAX (781) 665-7379 WEBSITE: http://www.cdi-diodes.com E-mail: mail@cdi-diodes.com 1N5518 thru 1N5546D INCLUDING -1 VERSIONS 0JL, Junction to Lead Thermal Resistance (C/W) 400 300 200 100 0 0.2 0.4 0.6 0.8 L, lead Length to Heat Sink (inches) 1.0 FIGURE 2 TYPICAL THERMAL RESISTANCE 1000 500 400 300 ZENER IMPEDANCE ZZT (OHMS) 200 100 50 40 30 20 10 5 4 3 2 1 .1 .2 .5 1 2 5 10 OPERATING CURRENT IZT (mA) 20 FIGURE 3 ZENER IMPEDANCE VS. OPERATING CURRENT 50 100