MIC-3393 6U CompactPCI(R) Intel(R) Xeon(R) Processor Quad/Dual Core Blade Features Supports 45 nm Intel(R) Xeon(R) Low Voltage/Ultra Low Voltage processor Intel(R) 5100MCH chipset supports 1066/1333 MHz FSB Up to 6 GB (DDR2 533/667) ECC memory Optimized design in one or two slots SBC with 2.5" SATA HDD/CompactFlash socket Optional Extension Module on 8HP version supports two XMCs/PMCs, two 2.5" SATA HDDs or VGA display output TPM, three GbE ports, six SATA ports, four USB 2.0 ports, one VGA port, three RS-232 ports, one PS/2 connector, and PCIe x1, PCIe x4 interfaces to the Rear Transition Module (RTM) Built-in Intel(R) I/OAT technology for enhanced I/O performance PICMG 2.16 R1.0, PICMG 2.9 R1.0, PICMG 2.1 R2.0 compliant RoHS COMPLIANT 2002/95/EC Introduction Experience true server class performance on CompactPCI. Using Intel(R) 45nm 64-bit Xeon technology with up to four Cores at 2.33 GHz combined with the powerful Intel(R) 5100MCH/ ICH9R chipset, the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multi-threading and I/OAT acceleration techniques. Enhanced Xeon(R) packaging, front side bus parity, onboard, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH combined with PICMG2.9, IPMI-based management make the MIC-3393 a highly available and reliable high performance computing engine. The comprehensive I/O subsystem includes a 2.5" SATA HDD or CompactFlash slot, three advanced Gigabit Ethernet controllers, two UARTs, USB ports and a TPM. The addition of PCIe links to the RTM further enhances versatility compared to previous generation blades resulting in best-in-class connectivity. The RIO-3311 RTM module supports one PS/2 connector with both keyboard and mouse ports, three USB ports, two RS-232 ports, 2 SATA ports, a PCIe based server graphics controller with VGA port, a USB port for USB NAND flash module, and alternate cabling for the three Gigabit Ethernet ports of the MIC-3393. In case the SATA disk drives and SATA RAID support of the ICH9R do not meet performance and reliability requirements, the RIO-3311 SAS version supports a 4-port SAS controller with RAID and failover support. The MIC-3393 is outfitted with single slot (4HP) or dual slot (8HP) front panels to match CPU performance, CPU power dissipation, and system cooling capabilities. The 8HP version of the blade can be extended with a MIC-3312 mezzanine module which can carry two XMCs/PMCs or two 2.5" SATA HDDs to support enhanced I/O modularity and additional mass storage options; or extended with a MIC-3313 mezzanine module which support one VGA display output. If further combine with rear I/O board RIO-3313, the CPCI system can support dual display. Specifications Processor System Memory CompactPCI Interface Ethernet Graphics (on RTM) Storage Front I/O CPU Chipset Front Side Bus BIOS Technology Max. Capacity Socket J1~J2 Connectors J3 Connector J5 Connector Bridge Mode Controller Interface I/O Connector Controller Interface I/O Connector Controller Resolution Type Channels USB 2.0 COM LAN Front Panel LEDs Buttons Quad-Core/Dual-Core Intel Xeon processor LV or Dual-Core Intel Xeon processor ULV up to 2.66 GHz Intel 5100MCH/ICH9R 1066/1333 MHz with parity protection Redundant AMI 2MByte SPI flash Dual channel DDR2 533/667 MHz with ECC 2 GB onboard, max. 6 GB total SODIMM x2 64-bit/66 MHz PCI local bus + RTM PICMG2.16 + RTM RTM Pericom PI7C9X130DNDE + PLX PCI 6540CB System Master/Drone (Standalone) 2 Intel 82574L single-port Gigabit Ethernet controllers 10/100/1000 Mbps Ethernet PICMG2.16 x 1, RJ-45 x1 or RTM x 2 Intel ICH9R MAC and Intel 82566DM Gigabit Ethernet PHY 10/100/1000 Mbps Ethernet RJ-45 x 1 or RTM x 1 XGI Volari Z11 PCIe Server graphics with 32 MB VRAM Up to 1600 x 1200, 64k hi-color at 70Hz SATA-II 1 channel. onboard SATA HDD carrier (default) or CF disk carrier (option)* 2 channels. to RTM 2 channels to extension module (8HP only) 2 type A 1 RS-232 on RJ-45 2 10/100/1000 Mbps on RJ-45 x 1 blue/yellow for Hot Swap/HDD, x 1 green for Master/Drone, x 1 yellow BMC Heartbeat, and x 1 green for Power CPU and BMC reset buttons CompactPCI Systems All product specifications are subject to change without notice Last updated : 10-Dec-2012 MIC-3393 Specifications (Cont.) USB COM LAN SATA PCIe Others CMOS Boot Options Console Other Output Interval Controller Controller Compatibility Configuration TDP (max./typ.) Rear I/O BIOS Watchdog Timer Hardware Monitor BMC Operating System Power Requirement Physical Characteristics 4 ports 2 ports 3 10/1000/1000 Mbps 2 ports 1 PCIe x 1, 1 PCIe x 4 PS/2 for keyboard & mouse Battery backed up with backup copy in EEPROM SATA, SAS, USB ports, USB flash disk, network (PXE) VGA or console redirection over COM Port, SoL supported by BMC Supports operation without disk, keyboard, video Local Reset and Interrupt Programmable 1s ~ 255s Winbond 83627DHG: voltages, CPU, chipset, board temperature Renesas H8S 2167, IPMIv2.0 compliant Windows XP 32/64 bit Windows Server 2008 32/64 bit, Windows Server 2003 32/64 bit, Linux 4HP 8HP 60W / <50W 90W / <75W 6U /1 slot width (4HP), 233.35 x 160 x 20 mm (9.2" x 6.3" x 0.8"), 1.03 kg (2.27 lb) 6U /2 slots width (8HP), 233.35 x 160 x 40 mm (9.2" x 6.3" x 1.6"), 1.42 kg (3.14 lb) Operating Non-operating 0 ~ 55 C (32 ~ 122 F) -40 ~ 85 C (-40 ~ 185 F) 95 %@ 40 C, non-condensing 95 %@ 60 C, non-condensing 5 ~ 500Hz, 2Grms (4HP), 1Grms (8HP) 5 ~ 500Hz, 3.5Grms (without on-board 2.5" SATA HDD) 15G, 6ms (without on-board 2.5" SATA HDD) 4,000m above sea level FCC Class A, CE, RoHS Designed for GR-63-Core and GR-1089-Core PICMG2.0 R3.0, PICMG2.1 R2.0, PICMG2.9 R1.0, PICMG2.16 R1.0 Dimensions & Weight Temperature Humidity Environment Vibration Bump Altitude Conformance NEBS Level 3 Standards Regulatory Compliance Supported CPU Configurations Intel CPU Model Number CPU architecture # Cores Freq. Cache FSB CPU TDP L5410 L5408 L5238 L5215 L3014 45 nm 45 nm 45 nm 45 nm 45 nm 4 4 2 2 1 2.33 GHz 2.13 GHz 2.66 GHz 1.86 GHz 2.4 GHz 12 MB 12 MB 6 MB 6 MB 3 MB 1333 MHz 1066 MHz 1333 MHz 1066 MHz 1066 MHz 50W 40W 35W 20W 30W Required airflow for single slot width 60CFM 50CFM 40CFM 20CFM 50CFM* Required airflow for dual slot width 35CFM 30CFM 25CFM 15CFM 30CFM *Note: These CPUs support extended case temperature and are qualified for NEBS environments **Note: Strong airflow required for the L3014 CPU is restricted to its thermal specification (Tc 60 C) Recommended Configurations CPU Board MIC-3393A-M2E MIC-3393B-M2E MIC-3393C-M2E MIC-3393D-M2E Extension Module MIC-3312-A1E MIC-3312-A2E MIC-3313-A1E Rear I/O Board RIO-3311-A1E or RIO-3311-A2E RIO-3311-A1E or RIO-3311-A2E RIO-3311-A1E or RIO-3311-A2E RIO-3311-A1E, RIO-3311-A2E or RIO-3313-A1E* *Note: RIO-3313-A1E must be used with MIC-3313-A1E Ordering Information System Board MIC-3393A-M2E MIC-3393B-M2E MIC-3393C-M2E MIC-3393D-M2E LAN 2 2 2 2 COM 1 1 1 1 USB 2 2 2 2 Front Panel XMC/PMC Knockout 2 - VGA Knockout 1 Memory 2 GB 2 GB 2 GB 2 GB Main On-board Features SATA HDD Socket / CF Socket 1 1 1 1 Slot Width 1 2 2 2 Extension Module MIC-3312-A1E MIC-3312-A2E MIC-3313-A1E *Note: Use of single rank, dual die package stack (3.8 mm) SORDIMM is advised **Note: CF board is included as accessory RTM Model RIO-3311-A1E RIO-3311-A2E RIO-3313-A1E LAN 3 3 - COM 2 2 - VGA 1 1 1 Rear Panel DVI-D PS/2* 1* 1* 2 - USB 2 2 - MiniSAS 1 - USB 1 1 - On-board Header/Socket/Connector USB Flash** SATA SAS (SATA interface) Slot Width 2 4 1 1 2 1 1 - *Note: One PS/2 port carries the signals for both K/B and mouse. Y cable is included. **Note: Use of Advantech EmbCore USB 2.0 Disk Module (Type C) recommended Online Download www.advantech.com/products Conn. J1,J3,J5 J1,J3,J5 J5 MIC-3393 Board Diagram DDR2 SORDIMM 533/667 ECC FSB DDR2 onboard 533/667 ECC DDR2 SORDIMM 533/667 ECC Channel 1 Intel(R) 5100MCH/ ICH9R PCIe2 PCI-X +12V, +5V, +3.3V PCIex8 Extension Module XTM (8HP only) SATA-II (2x) USB 2.0 (2x) SMB PCIex1 SATA-II (2x) USB 2.0 (4x) HWM / Sensors LPC ICH9R BMC SuperIO UART (2x) TPM User LEDs UART (2x) to RTM From SuperIO SATA-II User + Reset buttons i82566 J5 J3 MUX Lattice FPGA LFXP2 UART (2x) PS/2 (KB/MS) UART (2x) i82574L SPI 2MByte LOM RS-232 from FPGA to FPGA MUX PCIex1 PCIex1 UART, BUS IF Hot Swap Controller PCIex4 ICS Clock generator I2C J1/J2 PCI-X 64/66 PCIex4 DDR2 onboard 533/667 ECC All platform clocks PCI-X 64/66 PLX6540 Intel Xeon SC/DC/QC 52xx/53xx 54xx series Channel 0 Handle SW JMicro SATA2 PATA PATA Compact Flash USB 2.0 USB 2.0 SATA-II Hard Disk Drive Adapter, CF and HDD are mutually exclusive Ordering Information (Cont.) XTM Model MIC-3312-A1E MIC-3312-A2E MIC-3313-A1E On-board Header/Socket/Connector SATA HDD 2 - XMC/PMC 2 - One SATA HDD/ CompactFlash socket VGA 1 Two RJ-45 Gigabit LAN ports One RJ-45 COM port Two XMC/PMC knockouts (MIC-3393B only) Memory DIMM sockets One passive North Bridge heatsink One passive CPU heatsink CompactPCI Systems Two USB 2.0 ports