85 Series Product Definition 316L SS Pressure Sensor Small Profile 0 - 100mV Output Gage, Absolute 85 Series The 85 series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 85 is offered in a weldable package or with a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP as well as custom process fittings. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. FEATURES * * * * * 85 Series APPLICATIONS Weldable and Threaded Process Fittings -40C to +125C Operating Temperature Range 0.1% Pressure Non Linearity 1.0% Interchangeable Span (provided by gain set resistor) Solid State Reliability * * * * * * www.meas-spec.com Medical Instruments Process Control Fresh & Waste Water Measurements Partial Vacuum Gas Measurement Pressure Transmitters Tank Level Systems (RV & Industrial) September 2012 85 Series Product Definition Model Pressure Ranges Type (G = Gage A = Absolute D = Differential, V = Vacuum Gage) Span (typ) Supply Voltage Current Operating Temperature Unique Feature 85U 0 - 5, 15, 30, 50, 100, 300, 500psi A, G See Sensitivity 1.5mA -40C to +125C Small profile No substrate 85C 0 - 5, 15, 30, 50, 100, 300, 500psi A, G 100mV 1.5mA -40C to +125C Small profile 6-Pad substrate 85CV 0 - 5, 15, 30, 50, 100, 300, 500psi A, G 100mV -40C to +125C Small profile 4-Pad substrate 85VC 0 - 15, 30, 50, 100, 300, 500psi V 100mV -40C to +125C Small profile 6-Pad Substrate 10Vdc 1.5mA NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 85 Series www.meas-spec.com September 2012