USA/Canada:
Toll Free:
Europe:
(315) 432-89 09
(800) 544-24 14
+44 2392-232392
Model K100N50
X
4
Features:
• RoHS Compliant
• 100 Watts
• DC – 3.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Half Flange Termination
100 Watts, 50
Ω
Description
The K100N50X4 is high performance Aluminum Nitride (AlN) half flange
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element Thick Film
Substrate AlN Ceramic
Cover Alumina Ceramic
Mounting Flange Copper, nickel plated per QC-N-290
Leads 99% pure silver (.006” thick)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: 50 Ohms, ± 2%
Power: 100 Watts
Frequency Range: DC – 3.0GHz
V.S.W.R. 1.25 : 1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Storage temperature is -20°C to 85 ºC . Operating
temperature is -55ºC to 125ºC (see chart for derating temperatures). Specifications
subject to change with out noti ce.
Outline Drawing
Note: All dimensions in inches – 1inch = 2.54cm. Lead Length: 0.150in min.
K100N50X4 (097) Rev D.
ROHS
Compliant
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model K100N50X4
Typical Performance:
Power De-rating: Mounting Footprint and Procedure:
K100N50X4 (097) Rev D
ROHS
Compliant
