• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
3W Power Amplifier Module
4.0-5.9 GHz
XP1044-QL
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Rev. V2
Features
34 dBm P1dB
Pout 26 dBm @ EVM = 2.5% (PAR=9.17 dB)
46 dBm OIP3
18.5 dB Gain
8V Voltage Supply
Input Internally Matched
7x7mm Surface Mount Package
Ideal for WiMAX Applications @ 5.8 GHz and
Applications between 4 GHz and 5 GHz
RoHS* Compliant and 260°C Reflow Compatible
Description
The XP1044 is a highly linear 2-stage power
amplifier capable of 18.5 dB of gain, 34 dBm of
power at 1 dB compression and is housed in an
RoHS compliant 7x7mm package. The XP1044
provides less than 2.5% EVM at 26 dBm output
power with 802.16 OFDM signal and peak to
average ratio 9.17 dB. The input and output of the
device are internally pre-matched facilitating a
simplified input and output match. This product
operates off an 8V voltage supply and requires
negative voltage which is used for current control.
The XP1044-QL is specifically designed for WiMAX
applications between 4.9 GHz and 5.9 GHz, and the
performance can be shifted by adding external
matching components to cover applications between
4.0 GHz and 5.0 GHz.
Ordering Information
Part Number Package
XP1044-QL-0N00 bulk quantity
XP1044-QL-EV1 evaluation module
for 4.9 GHz ~ 5.9 GHz
XP1044-QL-EV2 evaluation module
for 4.0 GHz ~ 5.0 GHz
Pin Configuration
Pin No. Function Pin No. Function
3,4,5 RF IN 23 VD1
8 VG! 22 VD2
9 VG2
1,2,6,7,10,
11,12,13,
14,15,16,
20,21,24,
25,26,27,
28
GND
17,18,19 RF OUT
Absolute Maximum Ratings
Parameter Absolute Max.
Drain Supply Voltage (Vd) +9.0 V
Gate Supply Voltage (Vg) 0 V ~ -5 V
RF Input Power (RFin) +23 dBm
Stage 1 Current (Idd1) 375 mA
Stage 2 Current (Idd2) 750 mA
Power Dissipation (PDC) 9,0 W
Storage Temperature -55 °C to +150 °C
Junctions Temperature 175 °C
Operating Temperature (Ta) -40 °C to See Note 2
ESD (HBM) Class 1A
Moisture Sensitivity level MSL3
Thermal Resistance (Rth)1 15.6 °C
(1) *Thermal resistance of stage 2 only
(2) Calculate maximum operating backside temperature using: Tmax =
167 °C – [Vd*Idd2*Rth]. Thermal resistance of the 1st stage is 2x Rth
of the output stage, and therefore Idd1 must not exceed ½ Idd2 for a
specific maximum temperature
Functional Block Diagram
Pin-out Details:
Pin 1 Indicator