Technical specification: A M12x1 4pos 250 V 3 L 21,5 19 Sealing Current rating: IEC 61076-2-101 4/5pos 4 A at 40C Insulation resistance: IEC 60512 >=100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: -40C ... +85C Mating cycles: IEC 60512-9a >=100 D2 Contact: CuZn Contact plating: Nickel, gold plated Contact carrier: PBT GF, UL 94 Sealing chassis: NBR Counternut: CuZn, nickel plated Socket housing: CuZn, nickel plated Grouting: Polyurethane-resin, UL 94 A A 4 5 1 3 6 7 8 1 4 Installation specification: Recommended torque: 1-1,2 Nm 3 Conec installation tool: Torque wrench: 36-000200 Insert across flats 19: 36-000250 2 45 45 2 5 45 6x49 Pin layout PCB 33 n1,2 13,5 +0,1 n5,5 n 16,1 Index: c 23.11.12 MG A4555 Data sheet revised, technical specification changed, materials corrected date appd. 0,50mm 0,25mm 0,10mm THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH Description: 43-01032 SAL - 12 - FSH4 - P5,5 4 43-01033 SAL - 12 - FSH5 - P5,5 5 43-01034 SAL - 12 - FSH8 - P5,5 8 43-01035 SAL - 12 - FSH4 - P12 4 43-01036 SAL - 12 - FSH5 - P12 5 43-01037 SAL - 12 - FSH8 - P12 8 Pos Length L: 01.03.07 D1 D2 n5,0 n1,6 5,5mm n5,5 n1,4 n5,0 n1,6 12mm n5,5 n1,4 title: dim. in mm drawn 01.03.07 0 0,0 0,00 Part no: +0,1 Minimum wall thickness 1,5mm, alternativ panel cut-out d=16,1 Directive 2002/95/EC RoHS compliant 8pos 2 A at 40C Materials: M16x1,5 DO NOT ALTER CAD DRAWING BY HAND 8pos 30 V n0,8 D1 general tolerance: 5pos 60 V Width across flats 19 Rated voltage: IEC 61076-2-101 Male socket M12x1 with dip solder, backmounting name Fromm dwg no: Mankopf 43K1A268 R part no: see table