15-Serie 3500-A_18-Serie 3500-A 30/10/14 15:23 Page96 3500 series High performance toggle switches - environmentally sealed Distinctive features and specifications UG1410A Completely sealed switches withstanding 0,1 bar pressure * Frontal sealing to IP67 or IP69K by a silicone membrane (for sealed panel mounting, add washer U60, section I). * Rear sealing to IP 64 provided by moulded-in terminal inserts A Approved to European standards CECC 96000 Three types of terminals Many lever styles available ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load and electrical life at full load: see table below * Initial contact resistance : 10 m max. at 1A 2VDC * Insulation resistance : 1.000 M * Dielectric strength : 2.500 Vrms 50 Hz min. between terminals 3.000 Vrms 50 Hz min. between terminals and frame FUNCTIONS GENERAL PERFORMANCES ON-OFF et ON-ON 10.000 cycles, T20C 15A 28VDC resistive 15A 28VDC inductive 5A 28VDC lamp ON OFF ON 10.000 cycles, T20C 15A 28VDC resistive 15A 28VDC inductive 5A 28VDC lamp AUTRES FONCTIONS 10.000 cycles, T20C 15A 28VDC resistive 10A 28VDC inductive 3A 28VDC lamp MATERIALS * Case : mineral filled polyester UL94-V0 * Bushing and cover : zamac * Actuator : brass, nickel or chrome plated, or anodized aluminium * Contacts : silver alloy AGENCY APPROVAL CECC 96201-004 Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete appropriate box of ordering format. GENERAL SPECIFICATIONS * Mechanical life : 40.000 cycles * Torque : 2 Nm (1.47 Ft.lb) max. applied to nut * Panel thickness : see "Mounting Accessories" on the following pages * Operating temperature : -40c to +85C * Moisture resistance : 56 days The company reserves the right to change specifications without notice. A-96 www.apem.com APEM 15-Serie 3500-A_18-Serie 3500-A 30/10/14 15:23 Page97 3500 series High performance toggle switches - environmentally sealed Overview 35 SERIES Number of poles 3 4 Electrical functions Single pole Double pole 1-0 2-0 3-0 4-1 4-2 4-3 4-4 4-5 ON ON OFF ON ON MOM ON ON 3ON4 3ON4 3ON4 1ON6 1ON6 OFF m.OFF MOM ON MOM MOM ON MOM Lever styles 1 2 3 4 5 6 4-6 5-0 6-0 7-0 8-0 9-0 C ON6 OFF OFF OFF 1 MOM MOM ON MOM MOM ON 0 A D G 0 2 3 4 Screw Solder lug/quick-connect Normalized quickconnect Screw + clamp Function 4 : double pole only No locking Locked in 3 positions Locked out of center position Locked in keyway side Accessories 0 2 2 hex nuts, 1 locking ring and 1 lockwasher 2 hex nuts and 1 sealing washer See drawings on the following pages. Lever finish N B G* F* MOM ON ON MOM ON ON Lever locking styles Standard, length 17,5 mm (.688) or locking, length 20 mm (.787) Length 30 mm (1.181) Flatted, length 24 mm (.944) Length 40 mm (1,574) Length 50 mm (1.968) Locking, length 25,4 mm (1.000) Terminals Electrical functions (continued) Bright nickel Satin chrome Black Black with fluorescent tip (lever type 1 only) Painted or anodized Agency approval 0 1 None CECC Locking lever special finish (blank) P5 A6 None Painted yellow Anodized red Order with lever finish type C. Other colours : on request. * Black finish on bushing too. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - their options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Security caps are available to prevent inadvertent lever operation. They are presented in section I. Packaging unit : 25 pieces APEM www.apem.com A-97 A 15-Serie 3500-A_18-Serie 3500-A 30/10/14 15:23 Page98 3500 series High performance toggle switches - environmentally sealed * Screw, solder lug or quick-connect terminals * Also available with threaded terminals : consult factory * Screw terminals + clamp : on request. O3.10 (.122DIA) 1 2 3 6.35x0.80 (.25x.031) 6.35x0.80 (.25x.031) 4.50 (.177) A 10.80 (.425) O3.50 (.137DIA) 10.80 (.425) Keyway MODEL STRUCTURE Shown with standard lever FUNCTIONS III II I A2-A3 * A3-B5 A1-A2 B5-B6 ** A1-B5 B5-B4 ON ON OFF ON ON MOM ON ON MOM ON ON MOM ON ON Screw terminals Single pole Double pole Single pole Double pole Single pole Double pole 3531-00 3532-00 3533-00 3541-00 3542-00 3543-00 3544-10 3544-20 3544-30 3544-40 3544-50 3544-60 3545-00 3546-00 3547-00 3548-00 3549-00 3531-02 3532-02 3533-02 3541-02 3542-02 3543-02 3544-12 3544-22 3544-32 3544-42 3544-52 3544-62 3545-02 3546-02 3547-02 3548-02 3549-02 3531-03 3532-03 3533-03 3541-03 3542-03 3543-03 3544-13 3544-23 3544-33 3544-43 3544-53 3544-63 3545-03 3546-03 3547-03 3548-03 3549-03 3535-00 3536-00 3537-00 3538-00 3539-00 3535-02 3536-02 3537-02 3538-02 3539-02 3535-03 3536-03 3537-03 3538-03 3539-03 A2 A1 B5 A B4 A2 B6 A1 I 2 POS. 22 3 POS. 30 II O11.90 32NS (15/32 32NS) III A3 A2 A1 11.40 (.449) A2 A3 A1 10.80 (.425) A3 www.apem.com A2 10.00 10.00 (.393) (.393) A1 A3 11.00 (.433) 1.80 (.07) A2 A1 10.80 (.425) 31.40 (1.236) A1 A A 10.80 (.425) A3 11.40 (.449) A2 Double pole 17.50 (.689) O11.90 32NS (15/32 32NS) III A3 2 POS. 22 3 POS. 30 23.00 (.905) A A 32.00 (1.26) 10.80 (.425) 15.00 (.59) Single pole 17.50 (.689) II A 10.00 10.00 (.393) (.393) A-98 Normalized quickconnect terminals 31.40 (1.236) 32.00 (1.26) A3 Solder lugs and quick-connect term. * and ** : A2-B4 and A2-B6 = jumper to be wired by the user. Keyway I OFF m.OFF MOM ON * ON ON * MOM ON * MOM ON ** ON ON ** MOM ON ** MOM MOM ON OFF MOM OFF MOM OFF ON BASIC PART NUMBER APEM 15-Serie 3500-A_18-Serie 3500-A 30/10/14 15:23 Page99 3500 series High performance toggle switches - environmentally sealed LEVER STYLES O7.00 (.275DIA) O7.00 (.275DIA) 1 2 20.00 (.787) 3 4 25.40 (1.000) 25.00 (.984) 24.00 (.944) 30.00 (1.181) 20.00 (.787) 17.50 (.688) O7.00 (.236DIA) 30.00 (1.1811) O11.00 (.433DIA) O6.00 (.236DIA) A O10.50 (.413DIA) 15.00 (.59) O6.00 (.236DIA) 5 6 Standard LEVER FINISH N B G* F* C Bright nickel Satin chrome Black Black with fluorescent tip (available with lever type 1 only) Painted or anodized (for locking lever only) * Black finish on bushing too. LOCKING LEVER STYLES No locking 20.00 (.787) 0 APEM A D G Locked in 3 positions. For functions 4-1, 4-4 and 9-0. Locked out of center position. For functions 1-0 and 6-0. Locked in keyway. For functions 1-0 and 6-0. www.apem.com A-99 15-Serie 3500-A_18-Serie 3500-A 30/10/14 15:23 Page100 3500 series High performance toggle switches - environmentally sealed AGENCY APPROVAL None CECC 0 1 A MOUNTING ACCESSORIES 0 For NON-SEALED mounting (panel cut-out fig. 1, 2 or 3) 2 hex nuts 14 mm (.551) across flats, 1 locking ring U121 or U12, 1 lockwasher U13 Panel thickness : 5 mm (.196) max. 2 For SEALED mounting (panel cut-out fig. 2) 2 hex nuts 14 mm (.551) across flats and 1 sealing washer U60 Panel thickness : 4 mm (.157) max. Special hardware : black cap nut U129. Order separately. See section I. PANEL CUT-OUT O12.50 (.492DIA) 5.10 (.20) 1.70 (.066) Figure 1 Figure 2 O3.50 (.137DIA) 9.60 (.377) O12.20 (.48DIA) O12.20 (.48DIA) Figure 3 LOCKING LEVER SPECIAL FINISH (blank) P5 A6 None Painted yellow Anodized red Order with lever finish type C. Other colours on request. A-100 www.apem.com APEM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: 3531001ND02 3531001N000 3531021N000 3536001N000 3536021N000 3537001N000 3537001N002 3537021N000 3538001N000 3538021N000 3539001N000 3539021N000 3541001N000 3541021N000 3546001N000 3547001N000 3547021N000 3548001N000 3549001N000 3531001G000 3531001GD00 3531001ND00 3531003N000 3531033G000 3533001N000 3533001N010 3533003N000 3533003N012 3535001N000 3536001ND00 3537001N012 3537003N000 3539003N000 3539005N000 3541001N002 3541003N000 3541031N010 3544133G000 3544301N000 3545001B010 3545001N000 3546001B010 3546001G000 3546001ND10 3546026GD00 3546033G000 3547001B010 3547001N002 3547022G000 3547031N002 3548001N010 3549001B010 3549003N000 3546001G012 3544501N002