3
Mechanical Abrasives
The Total Solution for
the Professional
3M™990 Mandrel
•Designed for use with the 3” x 3/8” Radial Bristle Discs (PNs 07542, 07543, 07544).
•Allows stacking of one to four discs.
PART NUMBER DESCRIPTION COMMENTS
048011-15012-3 3M™Mandrel 990 for making a brush 1/8” - 1/2” wide
048011-16847-0 3M™ Mandrel 991 for making a brush 3/4” - 1” wide
3M™ Professional Shop Roll 304D
•Ideal for general and finishing applications
•Superior high strength yet extremely flexible J weight cloth backing. Identified by its red
color, this backing combines aggressive cut with the conformability necessary for strapping
and other operations requiring flexibility.
•Can be used by hand, on jitterbug sanders (coarse grade), or on forked spindles on air tools
or drills
•Excellent resistance to mineral shelling means it can be torn into very thin strips
•Great for crank and can applications and planing heads and engine blocks
PART NUMBER SIZE GRADE
051131-05106-5 1’ x 20 yd P80
051131-05105-8 1’ x 20 yd P120J
051131-05104-1 1’ x 20 yd P150J
051131-05103-4 1’ x 20 yd P180J
051131-05102-7 1’ x 20 yd P240J
051131-05101-0 1’ x 20 yd P320J
051131-05100-3 1’ x 20 yd P400J
051131-05113-3 1-1/2” x 20 yd P100J
051131-05112-6 1-1/2” x 20 yd P120J
051131-05111-9 1-1/2” x 20 yd P150J
051131-05110-2 1-1/2” x 20 yd P180J
051131-05109-6 1-1/2” x 20 yd P240J
051131-05108-9 1-1/2” x 20 yd P320J
051131-05107-2 1-1/2” x 20 yd P400J
051144-45121-0 3M™ Forked Spindle Dia. x Length: 1/4” x 3”
3M™ Wetordry™ Fabricut™ Rolls
•Made from a flexible, synthetic open mesh screen-type backing.
•Coated on both side with tough aluminum oxide mineral.
•Ideal for cleaning rusted or corroded surfaces.
•Can be used with or around water, oil, or axle grease without loading.
PART NUMBER GRADE ROLLS/CASE
1-1/2” x 25 yards
051144-05071-0 180 5
051144-05072-7 120 5
051144-05073-4 80 5
Fax On Demand (For Five or Fewer
Material Safety Data Sheets) 1-800-305-04519
Internet: www.3M.com/automotive
3
Automotive Aftermarket Division
3M Center, Building 223-6N-01
St. Paul, MN 55144-1000
www.3M.com/automotive
Recycled Paper
40% - Pre-consumer
10% - Post-consumer ' 3M 2004 60-4400-9940-0
3M, Roloc, Scotch-Brite, Wetordry, Fabricut,
Green Corps are trademarks of 3M
PART NUMBER SIZE GRADE DISCS/BOX BOXES/CASE
051131-07542 3” 50 10 4
051131-07543 3” 80 10 4
051131-07544 3” 120 10 4
3M™ Radial Bristle Discs
•3” diameter x 3/8” center hole
•Unique bristle pattern reaches tight or awkward areas such as grooves and along 90o angles.
•Flexible bristles conform to the part and cleans without removing base material.
•Helps to reduce damage and rework.
•Higher cut rate than wire brushes for faster, more uniform finish.
•Applications include: Removal of adhesive, paint, oxidation and other coatings.
Clean and prepare surfaces before and after welding. Remove gasket materials
from recessed areas. Remove O-ring residue.
3
Mechanical Abrasives
The Total Solution for
the Professional
3M™990 Mandrel
•Designed for use with the 3” x 3/8” Radial Bristle Discs (PNs 07542, 07543, 07544).
•Allows stacking of one to four discs.
PART NUMBER DESCRIPTION COMMENTS
048011-15012-3 3M™Mandrel 990 for making a brush 1/8” - 1/2” wide
048011-16847-0 3M™ Mandrel 991 for making a brush 3/4” - 1” wide
3M™ Professional Shop Roll 304D
•Ideal for general and finishing applications
•Superior high strength yet extremely flexible J weight cloth backing. Identified by its red
color, this backing combines aggressive cut with the conformability necessary for strapping
and other operations requiring flexibility.
•Can be used by hand, on jitterbug sanders (coarse grade), or on forked spindles on air tools
or drills
•Excellent resistance to mineral shelling means it can be torn into very thin strips
•Great for crank and can applications and planing heads and engine blocks
PART NUMBER SIZE GRADE
051131-05106-5 1’ x 20 yd P80
051131-05105-8 1’ x 20 yd P120J
051131-05104-1 1’ x 20 yd P150J
051131-05103-4 1’ x 20 yd P180J
051131-05102-7 1’ x 20 yd P240J
051131-05101-0 1’ x 20 yd P320J
051131-05100-3 1’ x 20 yd P400J
051131-05113-3 1-1/2” x 20 yd P100J
051131-05112-6 1-1/2” x 20 yd P120J
051131-05111-9 1-1/2” x 20 yd P150J
051131-05110-2 1-1/2” x 20 yd P180J
051131-05109-6 1-1/2” x 20 yd P240J
051131-05108-9 1-1/2” x 20 yd P320J
051131-05107-2 1-1/2” x 20 yd P400J
051144-45121-0 3M™ Forked Spindle Dia. x Length: 1/4” x 3”
3M™ Wetordry™ Fabricut™ Rolls
•Made from a flexible, synthetic open mesh screen-type backing.
•Coated on both side with tough aluminum oxide mineral.
•Ideal for cleaning rusted or corroded surfaces.
•Can be used with or around water, oil, or axle grease without loading.
PART NUMBER GRADE ROLLS/CASE
1-1/2” x 25 yards
051144-05071-0 180 5
051144-05072-7 120 5
051144-05073-4 80 5
Fax On Demand (For Five or Fewer
Material Safety Data Sheets) 1-800-305-04519
Internet: www.3M.com/automotive
3
Automotive Aftermarket Division
3M Center, Building 223-6N-01
St. Paul, MN 55144-1000
www.3M.com/automotive
Recycled Paper
40% - Pre-consumer
10% - Post-consumer ' 3M 2004 60-4400-9940-0
3M, Roloc, Scotch-Brite, Wetordry, Fabricut,
Green Corps are trademarks of 3M
PART NUMBER SIZE GRADE DISCS/BOX BOXES/CASE
051131-07542 3” 50 10 4
051131-07543 3” 80 10 4
051131-07544 3” 120 10 4
3M™ Radial Bristle Discs
•3” diameter x 3/8” center hole
•Unique bristle pattern reaches tight or awkward areas such as grooves and along 90o angles.
•Flexible bristles conform to the part and cleans without removing base material.
•Helps to reduce damage and rework.
•Higher cut rate than wire brushes for faster, more uniform finish.
•Applications include: Removal of adhesive, paint, oxidation and other coatings.
Clean and prepare surfaces before and after welding. Remove gasket materials
from recessed areas. Remove O-ring residue.
3
Mechanical Abrasives
The Total Solution for
the Professional
3M™990 Mandrel
•Designed for use with the 3” x 3/8” Radial Bristle Discs (PNs 07542, 07543, 07544).
•Allows stacking of one to four discs.
PART NUMBER DESCRIPTION COMMENTS
048011-15012-3 3M™Mandrel 990 for making a brush 1/8” - 1/2” wide
048011-16847-0 3M™ Mandrel 991 for making a brush 3/4” - 1” wide
3M™ Professional Shop Roll 304D
•Ideal for general and finishing applications
•Superior high strength yet extremely flexible J weight cloth backing. Identified by its red
color, this backing combines aggressive cut with the conformability necessary for strapping
and other operations requiring flexibility.
•Can be used by hand, on jitterbug sanders (coarse grade), or on forked spindles on air tools
or drills
•Excellent resistance to mineral shelling means it can be torn into very thin strips
•Great for crank and can applications and planing heads and engine blocks
PART NUMBER SIZE GRADE
051131-05106-5 1’ x 20 yd P80
051131-05105-8 1’ x 20 yd P120J
051131-05104-1 1’ x 20 yd P150J
051131-05103-4 1’ x 20 yd P180J
051131-05102-7 1’ x 20 yd P240J
051131-05101-0 1’ x 20 yd P320J
051131-05100-3 1’ x 20 yd P400J
051131-05113-3 1-1/2” x 20 yd P100J
051131-05112-6 1-1/2” x 20 yd P120J
051131-05111-9 1-1/2” x 20 yd P150J
051131-05110-2 1-1/2” x 20 yd P180J
051131-05109-6 1-1/2” x 20 yd P240J
051131-05108-9 1-1/2” x 20 yd P320J
051131-05107-2 1-1/2” x 20 yd P400J
051144-45121-0 3M™ Forked Spindle Dia. x Length: 1/4” x 3”
3M™ Wetordry™ Fabricut™ Rolls
•Made from a flexible, synthetic open mesh screen-type backing.
•Coated on both side with tough aluminum oxide mineral.
•Ideal for cleaning rusted or corroded surfaces.
•Can be used with or around water, oil, or axle grease without loading.
PART NUMBER GRADE ROLLS/CASE
1-1/2” x 25 yards
051144-05071-0 180 5
051144-05072-7 120 5
051144-05073-4 80 5
Fax On Demand (For Five or Fewer
Material Safety Data Sheets) 1-800-305-04519
Internet: www.3M.com/automotive
3
Automotive Aftermarket Division
3M Center, Building 223-6N-01
St. Paul, MN 55144-1000
www.3M.com/automotive
Recycled Paper
40% - Pre-consumer
10% - Post-consumer ' 3M 2004 60-4400-9940-0
3M, Roloc, Scotch-Brite, Wetordry, Fabricut,
Green Corps are trademarks of 3M
PART NUMBER SIZE GRADE DISCS/BOX BOXES/CASE
051131-07542 3” 50 10 4
051131-07543 3” 80 10 4
051131-07544 3” 120 10 4
3M™ Radial Bristle Discs
•3” diameter x 3/8” center hole
•Unique bristle pattern reaches tight or awkward areas such as grooves and along 90o angles.
•Flexible bristles conform to the part and cleans without removing base material.
•Helps to reduce damage and rework.
•Higher cut rate than wire brushes for faster, more uniform finish.
•Applications include: Removal of adhesive, paint, oxidation and other coatings.
Clean and prepare surfaces before and after welding. Remove gasket materials
from recessed areas. Remove O-ring residue.
3M™ Roloc™ Disc Pad Assembly
•Hard rubber backup pad.
•Provides firm support for Scotch-Brite®Roloc™ Surface Conditioning Discs and 3M™
Roloc™ Bristle Discs.
•Pad assemblies come complete with a 2” steel shaft and adaptor.
PART NUMBER DIAMETER SHAFT QTY/CASE
051131-05539 2” 1/4” Diameter 10
051131-05540 3” 1/4” Diameter 10
051131-05538 1” 1/4” Diameter 10
Scotch-Brite® Roloc™ Gasket Removal Discs
•Designed specifically for use on metal automotive engine and drive train parts where a less
aggressive disc is needed.
•Contains no hard abrasive grit-leaves a smooth metal finish with no stock removal or
rounding of sharp edges.
•Does not remove metal from the surface of engine parts.
•Does not contaminate inner engine parts with loose abrasive.
PART NUMBER SIZE COLOR MOS QTY/BOX
051131-07474 2” Green 25,000 10
051131-07475 3” Green 18,000 10
Scotch-Brite™ Scuff Sponges
•Designed to be used on a variety of primers, paints, clear coat finishes and blending areas.
•Designed to be used in hard to reach areas.
•Can be used wet or dry.
•Three grades cover a wide variety of applications, from aggressive parts cleaning to cleaning
leather and vinyl.
PART NUMBER DESCRIPTION COLOR FINISH QTY/BAG QTY/CASE
051131-07439-2 Type T Scuff Sponge White Buff 10 30
051131-07442-2 Ultra Fine Scuff Sponge Gray Fine 10 30
051131-07441-5 Gen.Purpose Scuff Sponge Maroon Medium 10 30
3M™ Green Corps™ Roloc™ Disc 264F
•The versatility of 3M™ Roloc™ product with the premium qualty of 3M™ Green Corps™
product
•Handy quick change tool for disc grinding which fits any standard 1/4” drill or air tool.
•Quick 1/2 turn on, 1/2 turn off speeds disc changing and cuts down time.
•The grit of any disc can be determined by the color of the plastic holding button:
Grade 50 - green
Grade 36 - brown
Grade 24 - black
PART NUMBER SIZE GRADE QTY/BOX QTY/CASE
051131-01398-8 2” 24 25 250
051131-01397-1 2” 36 25 250
051131-01396-4 2” 50 25 250
051131-01408-4 3” 24 25 250
051131-01407-7 3” 36 25 250
051131-01406-0 3” 50 25 250
Scotch-Brite® Roloc™ Surface Conditioning Discs
•Quick 1/2 turn on, 1/2 turn off
•Use with 3M™Roloc™ Disc Pad Assembly (PNs 05539-05541)
•Used to quickly remove cut cork or paper gaskets and form-in-place gasketing materials
prior to the assembling of power train components
PART NUMBER COLOR SIZE/GRADE DISCS/BOX BOXES/CASE
For Steel Parts
051131-07480 Brown 2” Coarse 25 4
051131-07485 Brown 3” Coarse 25 4
051131-07481 Maroon 2” Medium 25 4
051131-07486 Maroon 3” Medium 25 4
Scotch-Brite® Clean & Strip Disc Black
•Open mesh disc made from a tough, abrasive impregnated material.
•Perfect alternative to wire brushes for tough cleanup jobs on almost any type of surface.
•Disc is used with 3M™ Wheel Mandrel (PN07491).
PART NUMBER SIZE DISCS/CASE BAGS/CASE
051131-07460 4” x 1/4” 10 3
051131-07461 3” 10
051131-07466 4” x 1/2” 10
Reaches Awkward Areas, Cleans & Prepares Surfaces •Super High Strength - Ideal For General Cleaning •Extended Life - Super Tough •Can Be Use On a Wide Variety of Surfaces
Mechanical Abrasives
PART NUMBER SIZE GRADE COLOR MOS QTY/BOX QTY/CASE
051131-07524 2” 50 Green 25,000 10 40
051131-07525 2” 80 Yellow 25,000 10 40
051131-07526 3” 50 Green 18,000 10 40
051131-07527 3” 80 Yellow 18,000 10 40
051131-07528 2” 120 White 25,000 10 40
051131-07529 3” 120 White 18.000 10 40
051131-07530 1” 50 Green 30,000 10 40
051131-07531 1” 80 Yellow 30,000 10 40
051131-07532 1” 120 Yellow 30,000 10 40
3M™ Roloc™ Bristle Discs
•Super tough plastic bristle brush, embedded with abrasive.
•Wears as it cleans, continually exposing fresh abrasive.
•The ideal tool to replace scrapers, wire wheels and chemical
gasket stripper.
•Eliminates the danger of loose wires flying back at operator.
•Safer for parts and the environment than hazardous chemical strippers.
•Maximum operating speeds (M.O.S.) allow for use on both die grinders and pistol grip
grinders.
-1” Disc MOS =30,000 RPM
-2” Disc MOS =25,000 RPM
-3” Disc MOS =18,000 RPM
•Use green on steel parts and yellow or white on aluminum parts for quick and safe removal.
•Bristles ride over surface cleaning contaminants without gouging surface.
•Use with 3M™ Roloc™ Disc Pad Assemblies (PNs 05538, 05539 and 05540)
3M™ Roloc™ + Holder
•Allows use of Scotch-Brite®Molding Adhesive and Stripe Removal Discs (PNs 07501-
07502) on your tool.
•The 1/4” shank fits into any recommended standard tool.
•Quick and easy to use.
•Asimple twist and the disc is attached and ready to use.
PARTNUMBER SIZE QUANT. PER CASE
051131-07500 1” diameter x 1/4” shank 1
3M™ Wheel Mandrel
•For use with Scotch-Brite® Clean & Strip Disc (PN07460).
•Mandrel size is 2” long with 1/4” shank.
•Packed 1 per bag
PART NUMBER EACH PER CASE
048011-07491 1
3M™ Roloc™ Brake Rotor Surfacing Discs
•Apremium 120 grit 3M™ Roloc™ disc designed to create a non-directional scratch pattern
on brake rotor surfaces after turning.
•Starter Pack includes nine 3” 3M™ Roloc™ Brake Surfacing Discs and one 3M™ Roloc™
Disc Pad
•Refill Pack includes twelve 3M™ Roloc™ Brake Surfacing Discs.
PART NUMBER DESCRIPTION ROLLS PER CASE
051131-01410 Starter Pack 12
051131-01411 Refill Pack 12
3M™ Roloc™ Disc Pad Assembly
•Hard rubber backup pad.
•Provides firm support for Scotch-Brite®Roloc™ Surface Conditioning Discs and 3M™
Roloc™ Bristle Discs.
•Pad assemblies come complete with a 2” steel shaft and adaptor.
PART NUMBER DIAMETER SHAFT QTY/CASE
051131-05539 2” 1/4” Diameter 10
051131-05540 3” 1/4” Diameter 10
051131-05538 1” 1/4” Diameter 10
Scotch-Brite® Roloc™ Gasket Removal Discs
•Designed specifically for use on metal automotive engine and drive train parts where a less
aggressive disc is needed.
•Contains no hard abrasive grit-leaves a smooth metal finish with no stock removal or
rounding of sharp edges.
•Does not remove metal from the surface of engine parts.
•Does not contaminate inner engine parts with loose abrasive.
PART NUMBER SIZE COLOR MOS QTY/BOX
051131-07474 2” Green 25,000 10
051131-07475 3” Green 18,000 10
Scotch-Brite™ Scuff Sponges
•Designed to be used on a variety of primers, paints, clear coat finishes and blending areas.
•Designed to be used in hard to reach areas.
•Can be used wet or dry.
•Three grades cover a wide variety of applications, from aggressive parts cleaning to cleaning
leather and vinyl.
PART NUMBER DESCRIPTION COLOR FINISH QTY/BAG QTY/CASE
051131-07439-2 Type T Scuff Sponge White Buff 10 30
051131-07442-2 Ultra Fine Scuff Sponge Gray Fine 10 30
051131-07441-5 Gen.Purpose Scuff Sponge Maroon Medium 10 30
3M™ Green Corps™ Roloc™ Disc 264F
•The versatility of 3M™ Roloc™ product with the premium qualty of 3M™ Green Corps™
product
•Handy quick change tool for disc grinding which fits any standard 1/4” drill or air tool.
•Quick 1/2 turn on, 1/2 turn off speeds disc changing and cuts down time.
•The grit of any disc can be determined by the color of the plastic holding button:
Grade 50 - green
Grade 36 - brown
Grade 24 - black
PART NUMBER SIZE GRADE QTY/BOX QTY/CASE
051131-01398-8 2” 24 25 250
051131-01397-1 2” 36 25 250
051131-01396-4 2” 50 25 250
051131-01408-4 3” 24 25 250
051131-01407-7 3” 36 25 250
051131-01406-0 3” 50 25 250
Scotch-Brite® Roloc™ Surface Conditioning Discs
•Quick 1/2 turn on, 1/2 turn off
•Use with 3M™Roloc™ Disc Pad Assembly (PNs 05539-05541)
•Used to quickly remove cut cork or paper gaskets and form-in-place gasketing materials
prior to the assembling of power train components
PART NUMBER COLOR SIZE/GRADE DISCS/BOX BOXES/CASE
For Steel Parts
051131-07480 Brown 2” Coarse 25 4
051131-07485 Brown 3” Coarse 25 4
051131-07481 Maroon 2” Medium 25 4
051131-07486 Maroon 3” Medium 25 4
Scotch-Brite® Clean & Strip Disc Black
•Open mesh disc made from a tough, abrasive impregnated material.
•Perfect alternative to wire brushes for tough cleanup jobs on almost any type of surface.
•Disc is used with 3M™ Wheel Mandrel (PN07491).
PART NUMBER SIZE DISCS/CASE BAGS/CASE
051131-07460 4” x 1/4” 10 3
051131-07461 3” 10
051131-07466 4” x 1/2” 10
Reaches Awkward Areas, Cleans & Prepares Surfaces •Super High Strength - Ideal For General Cleaning •Extended Life - Super Tough •Can Be Use On a Wide Variety of Surfaces
Mechanical Abrasives
PART NUMBER SIZE GRADE COLOR MOS QTY/BOX QTY/CASE
051131-07524 2” 50 Green 25,000 10 40
051131-07525 2” 80 Yellow 25,000 10 40
051131-07526 3” 50 Green 18,000 10 40
051131-07527 3” 80 Yellow 18,000 10 40
051131-07528 2” 120 White 25,000 10 40
051131-07529 3” 120 White 18.000 10 40
051131-07530 1” 50 Green 30,000 10 40
051131-07531 1” 80 Yellow 30,000 10 40
051131-07532 1” 120 Yellow 30,000 10 40
3M™ Roloc™ Bristle Discs
•Super tough plastic bristle brush, embedded with abrasive.
•Wears as it cleans, continually exposing fresh abrasive.
•The ideal tool to replace scrapers, wire wheels and chemical
gasket stripper.
•Eliminates the danger of loose wires flying back at operator.
•Safer for parts and the environment than hazardous chemical strippers.
•Maximum operating speeds (M.O.S.) allow for use on both die grinders and pistol grip
grinders.
-1” Disc MOS =30,000 RPM
-2” Disc MOS =25,000 RPM
-3” Disc MOS =18,000 RPM
•Use green on steel parts and yellow or white on aluminum parts for quick and safe removal.
•Bristles ride over surface cleaning contaminants without gouging surface.
•Use with 3M™ Roloc™ Disc Pad Assemblies (PNs 05538, 05539 and 05540)
3M™ Roloc™ + Holder
•Allows use of Scotch-Brite®Molding Adhesive and Stripe Removal Discs (PNs 07501-
07502) on your tool.
•The 1/4” shank fits into any recommended standard tool.
•Quick and easy to use.
•Asimple twist and the disc is attached and ready to use.
PARTNUMBER SIZE QUANT. PER CASE
051131-07500 1” diameter x 1/4” shank 1
3M™ Wheel Mandrel
•For use with Scotch-Brite® Clean & Strip Disc (PN07460).
•Mandrel size is 2” long with 1/4” shank.
•Packed 1 per bag
PART NUMBER EACH PER CASE
048011-07491 1
3M™ Roloc™ Brake Rotor Surfacing Discs
•Apremium 120 grit 3M™ Roloc™ disc designed to create a non-directional scratch pattern
on brake rotor surfaces after turning.
•Starter Pack includes nine 3” 3M™ Roloc™ Brake Surfacing Discs and one 3M™ Roloc™
Disc Pad
•Refill Pack includes twelve 3M™ Roloc™ Brake Surfacing Discs.
PART NUMBER DESCRIPTION ROLLS PER CASE
051131-01410 Starter Pack 12
051131-01411 Refill Pack 12
3M™ Roloc™ Disc Pad Assembly
•Hard rubber backup pad.
•Provides firm support for Scotch-Brite®Roloc™ Surface Conditioning Discs and 3M™
Roloc™ Bristle Discs.
•Pad assemblies come complete with a 2” steel shaft and adaptor.
PART NUMBER DIAMETER SHAFT QTY/CASE
051131-05539 2” 1/4” Diameter 10
051131-05540 3” 1/4” Diameter 10
051131-05538 1” 1/4” Diameter 10
Scotch-Brite® Roloc™ Gasket Removal Discs
•Designed specifically for use on metal automotive engine and drive train parts where a less
aggressive disc is needed.
•Contains no hard abrasive grit-leaves a smooth metal finish with no stock removal or
rounding of sharp edges.
•Does not remove metal from the surface of engine parts.
•Does not contaminate inner engine parts with loose abrasive.
PART NUMBER SIZE COLOR MOS QTY/BOX
051131-07474 2” Green 25,000 10
051131-07475 3” Green 18,000 10
Scotch-Brite™ Scuff Sponges
•Designed to be used on a variety of primers, paints, clear coat finishes and blending areas.
•Designed to be used in hard to reach areas.
•Can be used wet or dry.
•Three grades cover a wide variety of applications, from aggressive parts cleaning to cleaning
leather and vinyl.
PART NUMBER DESCRIPTION COLOR FINISH QTY/BAG QTY/CASE
051131-07439-2 Type T Scuff Sponge White Buff 10 30
051131-07442-2 Ultra Fine Scuff Sponge Gray Fine 10 30
051131-07441-5 Gen.Purpose Scuff Sponge Maroon Medium 10 30
3M™ Green Corps™ Roloc™ Disc 264F
•The versatility of 3M™ Roloc™ product with the premium qualty of 3M™ Green Corps™
product
•Handy quick change tool for disc grinding which fits any standard 1/4” drill or air tool.
•Quick 1/2 turn on, 1/2 turn off speeds disc changing and cuts down time.
•The grit of any disc can be determined by the color of the plastic holding button:
Grade 50 - green
Grade 36 - brown
Grade 24 - black
PART NUMBER SIZE GRADE QTY/BOX QTY/CASE
051131-01398-8 2” 24 25 250
051131-01397-1 2” 36 25 250
051131-01396-4 2” 50 25 250
051131-01408-4 3” 24 25 250
051131-01407-7 3” 36 25 250
051131-01406-0 3” 50 25 250
Scotch-Brite® Roloc™ Surface Conditioning Discs
•Quick 1/2 turn on, 1/2 turn off
•Use with 3M™Roloc™ Disc Pad Assembly (PNs 05539-05541)
•Used to quickly remove cut cork or paper gaskets and form-in-place gasketing materials
prior to the assembling of power train components
PART NUMBER COLOR SIZE/GRADE DISCS/BOX BOXES/CASE
For Steel Parts
051131-07480 Brown 2” Coarse 25 4
051131-07485 Brown 3” Coarse 25 4
051131-07481 Maroon 2” Medium 25 4
051131-07486 Maroon 3” Medium 25 4
Scotch-Brite® Clean & Strip Disc Black
•Open mesh disc made from a tough, abrasive impregnated material.
•Perfect alternative to wire brushes for tough cleanup jobs on almost any type of surface.
•Disc is used with 3M™ Wheel Mandrel (PN07491).
PART NUMBER SIZE DISCS/CASE BAGS/CASE
051131-07460 4” x 1/4” 10 3
051131-07461 3” 10
051131-07466 4” x 1/2” 10
Reaches Awkward Areas, Cleans & Prepares Surfaces •Super High Strength - Ideal For General Cleaning •Extended Life - Super Tough •Can Be Use On a Wide Variety of Surfaces
Mechanical Abrasives
PART NUMBER SIZE GRADE COLOR MOS QTY/BOX QTY/CASE
051131-07524 2” 50 Green 25,000 10 40
051131-07525 2” 80 Yellow 25,000 10 40
051131-07526 3” 50 Green 18,000 10 40
051131-07527 3” 80 Yellow 18,000 10 40
051131-07528 2” 120 White 25,000 10 40
051131-07529 3” 120 White 18.000 10 40
051131-07530 1” 50 Green 30,000 10 40
051131-07531 1” 80 Yellow 30,000 10 40
051131-07532 1” 120 Yellow 30,000 10 40
3M™ Roloc™ Bristle Discs
•Super tough plastic bristle brush, embedded with abrasive.
•Wears as it cleans, continually exposing fresh abrasive.
•The ideal tool to replace scrapers, wire wheels and chemical
gasket stripper.
•Eliminates the danger of loose wires flying back at operator.
•Safer for parts and the environment than hazardous chemical strippers.
•Maximum operating speeds (M.O.S.) allow for use on both die grinders and pistol grip
grinders.
-1” Disc MOS =30,000 RPM
-2” Disc MOS =25,000 RPM
-3” Disc MOS =18,000 RPM
•Use green on steel parts and yellow or white on aluminum parts for quick and safe removal.
•Bristles ride over surface cleaning contaminants without gouging surface.
•Use with 3M™ Roloc™ Disc Pad Assemblies (PNs 05538, 05539 and 05540)
3M™ Roloc™ + Holder
•Allows use of Scotch-Brite®Molding Adhesive and Stripe Removal Discs (PNs 07501-
07502) on your tool.
•The 1/4” shank fits into any recommended standard tool.
•Quick and easy to use.
•Asimple twist and the disc is attached and ready to use.
PARTNUMBER SIZE QUANT. PER CASE
051131-07500 1” diameter x 1/4” shank 1
3M™ Wheel Mandrel
•For use with Scotch-Brite® Clean & Strip Disc (PN07460).
•Mandrel size is 2” long with 1/4” shank.
•Packed 1 per bag
PART NUMBER EACH PER CASE
048011-07491 1
3M™ Roloc™ Brake Rotor Surfacing Discs
•Apremium 120 grit 3M™ Roloc™ disc designed to create a non-directional scratch pattern
on brake rotor surfaces after turning.
•Starter Pack includes nine 3” 3M™ Roloc™ Brake Surfacing Discs and one 3M™ Roloc™
Disc Pad
•Refill Pack includes twelve 3M™ Roloc™ Brake Surfacing Discs.
PART NUMBER DESCRIPTION ROLLS PER CASE
051131-01410 Starter Pack 12
051131-01411 Refill Pack 12
3M™ Roloc™ Disc Pad Assembly
•Hard rubber backup pad.
•Provides firm support for Scotch-Brite®Roloc™ Surface Conditioning Discs and 3M™
Roloc™ Bristle Discs.
•Pad assemblies come complete with a 2” steel shaft and adaptor.
PART NUMBER DIAMETER SHAFT QTY/CASE
051131-05539 2” 1/4” Diameter 10
051131-05540 3” 1/4” Diameter 10
051131-05538 1” 1/4” Diameter 10
Scotch-Brite® Roloc™ Gasket Removal Discs
•Designed specifically for use on metal automotive engine and drive train parts where a less
aggressive disc is needed.
•Contains no hard abrasive grit-leaves a smooth metal finish with no stock removal or
rounding of sharp edges.
•Does not remove metal from the surface of engine parts.
•Does not contaminate inner engine parts with loose abrasive.
PART NUMBER SIZE COLOR MOS QTY/BOX
051131-07474 2” Green 25,000 10
051131-07475 3” Green 18,000 10
Scotch-Brite™ Scuff Sponges
•Designed to be used on a variety of primers, paints, clear coat finishes and blending areas.
•Designed to be used in hard to reach areas.
•Can be used wet or dry.
•Three grades cover a wide variety of applications, from aggressive parts cleaning to cleaning
leather and vinyl.
PART NUMBER DESCRIPTION COLOR FINISH QTY/BAG QTY/CASE
051131-07439-2 Type T Scuff Sponge White Buff 10 30
051131-07442-2 Ultra Fine Scuff Sponge Gray Fine 10 30
051131-07441-5 Gen.Purpose Scuff Sponge Maroon Medium 10 30
3M™ Green Corps™ Roloc™ Disc 264F
•The versatility of 3M™ Roloc™ product with the premium qualty of 3M™ Green Corps™
product
•Handy quick change tool for disc grinding which fits any standard 1/4” drill or air tool.
•Quick 1/2 turn on, 1/2 turn off speeds disc changing and cuts down time.
•The grit of any disc can be determined by the color of the plastic holding button:
Grade 50 - green
Grade 36 - brown
Grade 24 - black
PART NUMBER SIZE GRADE QTY/BOX QTY/CASE
051131-01398-8 2” 24 25 250
051131-01397-1 2” 36 25 250
051131-01396-4 2” 50 25 250
051131-01408-4 3” 24 25 250
051131-01407-7 3” 36 25 250
051131-01406-0 3” 50 25 250
Scotch-Brite® Roloc™ Surface Conditioning Discs
•Quick 1/2 turn on, 1/2 turn off
•Use with 3M™Roloc™ Disc Pad Assembly (PNs 05539-05541)
•Used to quickly remove cut cork or paper gaskets and form-in-place gasketing materials
prior to the assembling of power train components
PART NUMBER COLOR SIZE/GRADE DISCS/BOX BOXES/CASE
For Steel Parts
051131-07480 Brown 2” Coarse 25 4
051131-07485 Brown 3” Coarse 25 4
051131-07481 Maroon 2” Medium 25 4
051131-07486 Maroon 3” Medium 25 4
Scotch-Brite® Clean & Strip Disc Black
•Open mesh disc made from a tough, abrasive impregnated material.
•Perfect alternative to wire brushes for tough cleanup jobs on almost any type of surface.
•Disc is used with 3M™ Wheel Mandrel (PN07491).
PART NUMBER SIZE DISCS/CASE BAGS/CASE
051131-07460 4” x 1/4” 10 3
051131-07461 3” 10
051131-07466 4” x 1/2” 10
Reaches Awkward Areas, Cleans & Prepares Surfaces •Super High Strength - Ideal For General Cleaning •Extended Life - Super Tough •Can Be Use On a Wide Variety of Surfaces
Mechanical Abrasives
PART NUMBER SIZE GRADE COLOR MOS QTY/BOX QTY/CASE
051131-07524 2” 50 Green 25,000 10 40
051131-07525 2” 80 Yellow 25,000 10 40
051131-07526 3” 50 Green 18,000 10 40
051131-07527 3” 80 Yellow 18,000 10 40
051131-07528 2” 120 White 25,000 10 40
051131-07529 3” 120 White 18.000 10 40
051131-07530 1” 50 Green 30,000 10 40
051131-07531 1” 80 Yellow 30,000 10 40
051131-07532 1” 120 Yellow 30,000 10 40
3M™ Roloc™ Bristle Discs
•Super tough plastic bristle brush, embedded with abrasive.
•Wears as it cleans, continually exposing fresh abrasive.
•The ideal tool to replace scrapers, wire wheels and chemical
gasket stripper.
•Eliminates the danger of loose wires flying back at operator.
•Safer for parts and the environment than hazardous chemical strippers.
•Maximum operating speeds (M.O.S.) allow for use on both die grinders and pistol grip
grinders.
-1” Disc MOS =30,000 RPM
-2” Disc MOS =25,000 RPM
-3” Disc MOS =18,000 RPM
•Use green on steel parts and yellow or white on aluminum parts for quick and safe removal.
•Bristles ride over surface cleaning contaminants without gouging surface.
•Use with 3M™ Roloc™ Disc Pad Assemblies (PNs 05538, 05539 and 05540)
3M™ Roloc™ + Holder
•Allows use of Scotch-Brite®Molding Adhesive and Stripe Removal Discs (PNs 07501-
07502) on your tool.
•The 1/4” shank fits into any recommended standard tool.
•Quick and easy to use.
•Asimple twist and the disc is attached and ready to use.
PARTNUMBER SIZE QUANT. PER CASE
051131-07500 1” diameter x 1/4” shank 1
3M™ Wheel Mandrel
•For use with Scotch-Brite® Clean & Strip Disc (PN07460).
•Mandrel size is 2” long with 1/4” shank.
•Packed 1 per bag
PART NUMBER EACH PER CASE
048011-07491 1
3M™ Roloc™ Brake Rotor Surfacing Discs
•Apremium 120 grit 3M™ Roloc™ disc designed to create a non-directional scratch pattern
on brake rotor surfaces after turning.
•Starter Pack includes nine 3” 3M™ Roloc™ Brake Surfacing Discs and one 3M™ Roloc™
Disc Pad
•Refill Pack includes twelve 3M™ Roloc™ Brake Surfacing Discs.
PART NUMBER DESCRIPTION ROLLS PER CASE
051131-01410 Starter Pack 12
051131-01411 Refill Pack 12
3
Mechanical Abrasives
The Total Solution for
the Professional
3M™990 Mandrel
•Designed for use with the 3” x 3/8” Radial Bristle Discs (PNs 07542, 07543, 07544).
•Allows stacking of one to four discs.
PART NUMBER DESCRIPTION COMMENTS
048011-15012-3 3M™Mandrel 990 for making a brush 1/8” - 1/2” wide
048011-16847-0 3M™ Mandrel 991 for making a brush 3/4” - 1” wide
3M™ Professional Shop Roll 304D
•Ideal for general and finishing applications
•Superior high strength yet extremely flexible J weight cloth backing. Identified by its red
color, this backing combines aggressive cut with the conformability necessary for strapping
and other operations requiring flexibility.
•Can be used by hand, on jitterbug sanders (coarse grade), or on forked spindles on air tools
or drills
•Excellent resistance to mineral shelling means it can be torn into very thin strips
•Great for crank and can applications and planing heads and engine blocks
PART NUMBER SIZE GRADE
051131-05106-5 1’ x 20 yd P80
051131-05105-8 1’ x 20 yd P120J
051131-05104-1 1’ x 20 yd P150J
051131-05103-4 1’ x 20 yd P180J
051131-05102-7 1’ x 20 yd P240J
051131-05101-0 1’ x 20 yd P320J
051131-05100-3 1’ x 20 yd P400J
051131-05113-3 1-1/2” x 20 yd P100J
051131-05112-6 1-1/2” x 20 yd P120J
051131-05111-9 1-1/2” x 20 yd P150J
051131-05110-2 1-1/2” x 20 yd P180J
051131-05109-6 1-1/2” x 20 yd P240J
051131-05108-9 1-1/2” x 20 yd P320J
051131-05107-2 1-1/2” x 20 yd P400J
051144-45121-0 3M™ Forked Spindle Dia. x Length: 1/4” x 3”
3M™ Wetordry™ Fabricut™ Rolls
•Made from a flexible, synthetic open mesh screen-type backing.
•Coated on both side with tough aluminum oxide mineral.
•Ideal for cleaning rusted or corroded surfaces.
•Can be used with or around water, oil, or axle grease without loading.
PART NUMBER GRADE ROLLS/CASE
1-1/2” x 25 yards
051144-05071-0 180 5
051144-05072-7 120 5
051144-05073-4 80 5
Fax On Demand (For Five or Fewer
Material Safety Data Sheets) 1-800-305-04519
Internet: www.3M.com/automotive
3
Automotive Aftermarket Division
3M Center, Building 223-6N-01
St. Paul, MN 55144-1000
www.3M.com/automotive
Recycled Paper
40% - Pre-consumer
10% - Post-consumer ' 3M 2004 60-4400-9940-0
3M, Roloc, Scotch-Brite, Wetordry, Fabricut,
Green Corps are trademarks of 3M
PART NUMBER SIZE GRADE DISCS/BOX BOXES/CASE
051131-07542 3” 50 10 4
051131-07543 3” 80 10 4
051131-07544 3” 120 10 4
3M™ Radial Bristle Discs
•3” diameter x 3/8” center hole
•Unique bristle pattern reaches tight or awkward areas such as grooves and along 90o angles.
•Flexible bristles conform to the part and cleans without removing base material.
•Helps to reduce damage and rework.
•Higher cut rate than wire brushes for faster, more uniform finish.
•Applications include: Removal of adhesive, paint, oxidation and other coatings.
Clean and prepare surfaces before and after welding. Remove gasket materials
from recessed areas. Remove O-ring residue.
