OMH3075S-SM - Optek Technologies, Inc.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 1 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

Hall

Element

Voltage

Regulator

1Vcc

Output

Ground

VCC

Ground

Output

Features:

• Designed for non-contact switching operations

• Operates over a broad range of supply voltages

• Excellent temperature stability operates in harsh environments

• Suitable for military and space applications

• Processing patterned after class B or S of MIL-STD-883

• Through Hole 0.40” [10.16 mm] lead length minimum

• Surface Mount 0.125” [3.18 mm] lead length

Description:

These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear

amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a band-

gap voltage regulator that allows operation with a wide range of supply voltages. These devices feature logic level

output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any

standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching

frequencies from DC to over 200 kHz.

The Uni-Polar turns on with a (logic level “0”) after a sufficient magnetic field from the south pole of a magnet

approaches the symbolized face of the device (operating point) and turns off (logic level “1”) after the magnetic

field reaches a minimum value. The Bi-Polar device turns on (logic level “0”) in the presence of a magnetic south

pole and turns off (logic level “1”) when subjected to a magnetic north pole. Both magnetic poles are necessary for

operation for Bi-Polar devices. This feature makes these sensors ideal for applications in non-contact switching

operations, brushless DC motors and for use with multiple pole magnets.

B and S devices are processed to OPTEK’s military screening program patterned after MIL-STD-883. This

product has passed Radiation Hardness testing up to 350 Krad (si) per MIL-STD-883 method 1019.6 and up to

100 Krad (si) for ELDRS.

Contact your local representative or OPTEK for more information.

Ceramic Package

Applications:

• Non-contact switching operations

• Brushless DC motors

• Multiple pole magnets

• Non-contact reflective object sensor

• Assembly line automation

• Machine automation

• Machine safety

• End of travel sensor

• Door sensor

Pin # Description

1 VCC

2 Ground

3 Output

DIMENSIONS ARE IN: INCHES

[MILLIMETERS]

Magnet on

this Side

Through Hole

SMD

Lead finish = Solder Dipped (Sn 63/37)

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 2 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

Notes:

(1) Heat sink leads during hand soldering.

Absolute Maximum Ratings (TA = 25° C unless otherwise noted)

Supply Voltage, VCC 25 V

Storage Temperature Range, TS -65°C to +150°C

Operating Temperature Range, TA -55°C to +125°C

Lead Soldering Temperature (1/8 in. (3.2 mm) from case for 5 seconds with soldering iron) 260°C(1)

Output ON Current, ISINK 25 mA

Output OFF Voltage, VOUT 25 V

Magnetic Flux Density, B Unlimited

Part

Number

Hi-Reliability

Hallogic®

Sensor

Operate Point

Gauss

Min / Typ / Max

Release Point

Gauss

Min / Typ / Max

Hysteresis Gauss

Min / Typ / Max

VCC (Volts)

Min / Max

Package

OMH090B

Uni-Polar

Non-Latching

50/90/180 30 / 60 / 160 5 / 30 / 70

4.5 / 24.0

Through

Hole

OMH090S

OMH3019B 175 / 420 / 500 125 / 220 / 420 30 / 100 / 155

OMH3019S

OMH3020B 70 / 220 / 350 50 / 165 / 330 15 / 55 / 200

OMH3020S

OMH3040B 70 / 150 / 200 50 / 115 / 180 110 / 35 / 60

OMH3040S

OMH3075B

Bi-Polar

Latching

50 / 150 / 250 -250 / -150 / -50 100 / 300 / 500

OMH3075S

OMH3131B 20 / 60 / 95 10 / 45 / 85 5 / 15 / 40

OMH3131S

OMH090B-SM

Uni-Polar

Non-Latching

50/90/180 30 / 60 / 160 5 / 30 / 70

SMD

OMH090S-SM

OMH3019B-SM 175 / 420 / 500 125 / 220 / 420 30 / 100 / 155

OMH3019S-SM

OMH3020B-SM 70 / 220 / 350 50 / 165 / 330 15 / 55 / 200

OMH3020S-SM

OMH3040B-SM 70 / 150 / 200 50 / 115 / 180 110 / 35 / 60

OMH3040S-SM

OMH3075B-SM

Bi-Polar

Latching

50 / 150 / 250 -250 / -150 / -50 100 / 300 / 500

OMH3075S-SM

OMH3131B-SM 20 / 60 / 95 5 / 15 / 40

OMH3131S-SM 10 / 45 / 85

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 3 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

Electrical Characteristics (Vcc = 4.5 V to 24 V, TA = 25° C unless otherwise noted)

OMH3019, OMH3019B, OMH3019S Uni-Polar

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

BOP Magnetic Operate Point(1) 175

300

500

575 Gauss +25°C

-55°C & +125°C

BRP Magnetic Release Point 125

100

235

420

- Gauss +25°C

-55°C & +125°C

BH Magnetic Hysteresis 30

155

- Gauss +25°C

-55°C to +125°C

ICC Supply Current - 5 9 mA VCC = 24 V, Output On, B ≤ 50 Gauss

VOL Output Saturation Voltage - 125 300 mV VCC = 4.5 V, IOL = 15 mA, B ≥ 500 Gauss

IOH Output Leakage Current - 0.10 1.0 µA VCC = 24 V, VOUT = 24 V, B < 50 Gauss

tr Output Rise Time - 0.13 1 µs

tf Output Fall Time - 0.14 1 µs

RL = 460 Ω, CL = 20 pF, VCC = 12 V

(guaranteed not tested)

Notes:

(1) South pole facing symbolized surface.

Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)

OMH090, OMH090B, OMH090S Uni-Polar

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

BOP Magnetic Operate Point(1)

210

200

180

Gauss

-55°C

+25°C

+125°C

BRP Magnetic Release Point 30

180

170 Gauss -55°C & +25°C

+125°C

BH Magnetic Hysteresis 5

70 Gauss -55°C

+25°C & +125°C

ICC Supply Current

-55°C,VCC = 24 V, Output On, B≤250 Gauss

+25°

+125°C

VOL Output Saturation Voltage -

125

300

400 mV -55°C,VCC = 4.5 V, IOL = 30 mA,B≥250 Gauss

+25°C & +125°C

IOH Output Leakage Current

0.50

µA

-55°C,VCC = 24 V, VOUT =24 V, B≤250 Gauss

+25°

+125°C

tr Output Rise Time - 0.13 1.00 µs

tf Output Fall Time - 0.14 1.00 µs

RL = 820 Ω, CL = 20 pF, VCC = 14 V

(guaranteed not tested)

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 4 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

Notes:

(1) South pole facing symbolized surface.

Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)

OMH3020, OMH3020B, OMH3020S Uni-Polar

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

BOP Magnetic Operate Point(1)

230

350

425 Gauss +25°C

-55°C & +125°C

BRP Magnetic Release Point

180

- Gauss +25°C

-55°C & +125°C

BH Magnetic Hysteresis 10

- Gauss +25°C

-55°C & +125°C

Icc Supply Current - 4 7 mA VCC = 24 V, Output On, B ≤ 50 Gauss

VOL Output Saturation Voltage - 100 400 mV VCC = 4.5 V, IOL = 15 mA, B ≥ 350 Gauss

IOH Output Leakage Current - 0.10 10 µA VCC = 24 V, VOUT = 24 V, B ≤ 50 Gauss

tr Output Rise Time - 0.21 1 µs

tf Output Fall Time - 0.10 1 µs

RL = 820 Ω, CL = 20 pF, VCC = 12 V

(guaranteed not tested)

Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)

OMH3040, OMH3040B, OMH3040S Uni-Polar

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

BOP Magnetic Operate Point(1)

150

200

270 Gauss +25°C

-55°C & +125°C

BRP Magnetic Release Point 50

115

180

210 Gauss +25°C

-55°C & +125°C

BH Magnetic Hysteresis

- Gauss +25°C

-55°C & +125°C

Icc Supply Current -

8 mA +25°C, VCC = 24 V, Output On, B ≤ 250 Gauss

-55°C & +125°C

VOL Output Saturation Voltage - 100 400 mV VCC = 4.5 V, IOL = 20 mA, B ≥ 250 Gauss

IOH Output Leakage Current

0.10

µA

-55°C

+25°C, VCC = 24V, VOUT = 24V, B ≤ 250 Gauss

+125°C

tr Output Rise Time - 0.21 1 µs

tf Output Fall Time - 0.10 1 µs

RL = 820 Ω, CL = 20 pF, VCC = 12 V

(guaranteed not tested)

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 5 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

Notes:

(1) South pole facing symbolized surface.

Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)

OMH3075, OMH3075B, OMH3075S Bi-Polar Latching

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

BOP Magnetic Operate Point(1) 50

150

250

275 Gauss +25°C

-55°C & +125°C

BRP Magnetic Release Point -250

-275

-150

-50

-25 Gauss +25°C

-55°C & +125°C

BH Magnetic Hysteresis 100

200

500

- Gauss +25°C

-55°C & +125°C

ICC Supply Current -

8 mA +25°C, VCC = 24 V, Output On, B ≤ 250 Gauss

-55°C & +125°C

VOL Output Saturation Voltage

100

500

400

-55°C

+25°C, VCC = 4.5 V, IOL = 20 mA, B ≥ 250 Gauss

+125°C

IOH Output Leakage Current - 0.10 1.0 µA VCC= 24 V, VOUT = 24 V, B ≤ 250 Gauss

tr Output Rise Time - 0.21 1 µs

tf Output Fall Time - 0.10 1 µs

RL = 820 Ω, CL = 20 pF, Vcc = 12 V

(guaranteed not tested)

Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)

OMH3131, OMH3131B & OMS3131S Uni-Polar

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

BOP Magnetic Operate Point(1) 20

150 Gauss +25°C

-55°C to +125°C

BRP Magnetic Release Point 10

145 Gauss +25°C

-55°C to +125°C

BH Magnetic Hysteresis 5

145 Gauss +25°C

-55°C to +125°C

ICC Supply Current - 4 7 mA VCC = 24 V, Output On, B > 250 Gauss

VOL Output Saturation Voltage - 100 400 mV VCC = 4.5 V, IOL = 15 mA, B ≥ 250 Gauss

IOH Output Leakage Current - 0.10 10 µA VCC = 24 V, VOUT = 24 V, B ≤ 0 Gauss

tr Output Rise Time - 0.21 1 µs

tf Output Fall Time - 0.10 1 µs

RL = 820 Ω, CL = 20 pF, Vcc = 12 V

(guaranteed not tested)

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 6 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S)

Magnetic Operate & Release Points vs Temperature

100

120

140

160

180

-60 -40 -20 0 20 40 60 80 100 120 140 160

Temperature (°C)

Manetic Flux Level - Gauss

OMH090 Release

OMH090 Operate

OMH3131 Release

OMH3131 Operate

OMH3040 Release

OMH3040 Operate

Magnetic Operate & Release Points vs Temperature

-200

-100

100

200

300

400

-60 -40 -20 0 20 40 60 80 100 120 140 160

Temperature (°C)

Manetic Flux Level - Gauss

OMH3075 Release

OMH3075 Operate

OMH3019

OMH3019 Operate

OMH3020 Release

OMH3020 Operate

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C.1 07/08

Page 7 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

High Reliability Hallogic Hall-Effect Sensors

OMH090 OMH3019, OMH3020, OMH3040, OMH3075,

OMH3131 (B, S versions)

OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S)

U.U.T.

820 Ohm

20 pf

Vcc

Output

Ground

VOL

10%

90%

TrTf

90%

10%

BOP RP

Magnetic Field

100

150

200

250

300

350

-40°C 0°C 40°C 80°C 120°C 150°C

Temperature (°C)

Typical Time (ns)

Rise Time

Fall Time

Rise and Fall Time vs Temperature

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

-40°C 0°C 40°C 80°C 120°C 150°C

Temperature (°C)

Typical Icc (mA)

Icc ON (mA)

Icc OFF (mA)

ICC vs Temperature

0.10

0.15

0.20

0.25

0.30

0.35

0.40

-40°C 0°C 40°C 80°C 120°C 150°C

Temperature (°C)

Typical Saturation Voltage (V)

= 820

ohms

Saturation Voltage vs Temperature