SPEC NO: DSAG1132 REV NO: V.6 DATE: AUG/29/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.J.Liu ERP: 1352000355
SURFACE MOUNT DISPLAY
Part Number: KCDA02-101 High Efficiency Red
Features
z 0.2 INCH DIGIT HEIGHT.
z LOW CURRENT OPERATION.
z EXCELLENT CHARACTER APPEARANCE.
z I.C. COMPATIBLE.
z MECHANICALLY RUGGED.
z PACKAGE :300PCS / REEL.
z GRAY FACE, WHITE SEGMENT.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG1132 REV NO: V.6 DATE: AUG/29/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.J.Liu ERP: 1352000355
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA
Min. Typ.
KCDA02-101 High Efficiency Red (GaAsP/GaP) WHITE DIFFUSED 1200 5800 Common Anode, Rt.
Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR=5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG1132 REV NO: V.6 DATE: AUG/29/2007 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.J.Liu ERP: 1352000355
High Efficiency Red KCDA02-101
SPEC NO: DSAG1132 REV NO: V.6 DATE: AUG/29/2007 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.J.Liu ERP: 1352000355
KCDA02-101
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Tape Specifications
(Units : mm)