VCAN26A2-03G www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323 FEATURES * For CAN and FLEX-Bus applications 3 * Small SOT-323 package * 2-line ESD-protection 1 2 * Working range 26.5 V 22742 * Low leakage current IR < 0.05 A SOT-323 22743 * Low load capacitance CD < 15 pF * ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge MARKING (example only) WW VY ABC * ESD capability according to AEC-Q101: human body model: class H3B: > 8 kV 22744 * e3 - pins plated with tin (Sn) ABC = type code (see table below) WW = date code working week VY = date code year * AEC-Q101 qualified available * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PART NUMBER (EXAMPLE) AEC-Q101 QUALIFIED RoHS-COMPLIANT + LEAD (Pb)-FREE TERMINATIONS STANDARD GREEN PACKAGING CODE TIN PLATED ORDERING CODE (EXAMPLE) 3K PER 7" REEL 10K PER 13" REEL (8 mm TAPE) (8 mm TAPE) 15K/BOX = MOQ 10K/BOX = MOQ VCAN26A2-03G - E 3 -08 VCAN26A2-03G-E3-08 VCAN26A2-03G H E 3 -08 VCAN26A2-03G - E 3 -18 VCAN26A2-03G-E3-18 VCAN26A2-03G H E 3 -18 VCAN26A2-03GHE3-18 VCAN26A2-03GHE3-08 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS VCAN26A2-03G SOT-323 6A2 5.65 mg UL 94 V-0 MSL level 1 (according J-STD-020) Peak temperature max. 260 C ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL Peak pulse current TA = 25 C, acc. IEC 61000-4-5; tp = 8/20 s; single shot IPPM 3 A Peak pulse power TA = 25 C; pin 1 or 2 to pin 3; acc. IEC 61000-4-5; tp = 8/20 s; single shot PPP 150 W 30 kV 30 kV TJ -55 to +150 C TSTG -55 to +150 C ESD immunity Operating temperature Storage temperature Rev. 1.2, 23-Feb-16 Contact discharge acc. IEC 61000-4-2; 10 pulses, TA = 25 C Air discharge acc. IEC 61000-4-2; 10 pulses, TA = 25 C Junction temperature VESD VALUE UNIT Document Number: 85894 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCAN26A2-03G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (pin 1 to 3, 3 to 1, 2 to 3, or 3 to 2) (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. Number of lines which can be protected Nchannel - Max. reverse working voltage VRWM - Reverse voltage At IR = 0.05 A VR 26.5 - - V Reverse current At VRWM = 26.5 V IR - - 0.05 A At IR = 1 mA VBR 28 30 32 V Protection paths Reverse stand-off voltage Reverse breakdown voltage UNIT - 2 lines - 26.5 V At IPP 1 A; tp = 8/20 s VC - 33 40 V At IPP = IPPM = 3 A; tp = 8/20 s VC - 40 50 V At VR = 0 V, f = 1 MHz CD - 10 15 pF Diode capacitance matching at VR = 0 V, TJ = -40 C to 125 C / CD13 vs. CD23 CD - - 2 pF Reverse clamping voltage Capacitance MAX. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 120 % 12 Pin 1-3 or 2-3 f = 1MHz Rise time = 0.7 ns to 1 ns 10 8 80 % CD (pF) Discharge Current IESD 100 % 60 % 53 % 6 4 40 % 27 % 2 20 % 0% -10 0 10 20 30 40 50 60 70 80 90 100 -30 Time (ns) 20557 -10 0 10 20 0 30 VR (V) 22757 Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 / 150 pF) Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR 35 8 s to 100 % 100 % -20 Pin 1-3 or 2-3 or 3-2 30 80 % VR (V) 25 IPPM 60 % 20 s to 50 % 20 15 40 % 10 20 % 5 0% 0 20548 10 20 30 40 Time (s) Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-5 Rev. 1.2, 23-Feb-16 0 0.01 22759 0.1 1 10 100 1000 10 000 IR (A) Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR Document Number: 85894 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCAN26A2-03G www.vishay.com Vishay Semiconductors 45 120 Pin 1-3 or 2-3 or 3-1 or 3-2 40 Transmission Line Pulse TLP: tp = 100 ns Pin 1-3 or 2-3 100 35 80 VC-TLP (V) VC (V) 30 25 20 60 15 Pin 3-1or 3-2 40 10 20 Measured acc. IEC 61000-4-5 (8/20 s - wave form) 5 0 0 0 1 2 3 4 0 IPP (A) 22758 10 20 22760 Fig. 5 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP 30 40 50 60 ITLP (A) Fig. 6 - Typical Clamping Voltage VC-TLP vs. Pulse Current ITLP 8 0 0.15 (0.006) 0.08 (0.003) 0.0 (0.000) 0.1 (0.004) 2.0 (0.079) 0.8 (0.031) 1.1 (0.043) 2.2 (0.087) 0.8 (0.031) 1.0 (0.039) PACKAGE DIMENSIONS in millimeters (inches) SOT-323 0.46 (0.018) 0.26 (0.010) 0.525 (0.021) ref. 0.4 (0.016) 0.2 (0.008) 2.45 (0.096) 1.35 (0.053) 0.65 (0.026) typ 1.15 (0.045) 2.15 (0.085) foot print recommendation: 0.6 (0.024) 1.4 (0.055) Document no.: 6.541-5040.02-4 Rev. 1 - Date: 06. April 2010 0.65 (0.026) 1.8 (0.071) 0.8 (0.031) 1.2 (0.047) 21113 1.3 (0.051) Rev. 1.2, 23-Feb-16 Document Number: 85894 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCAN26A2-03G www.vishay.com Vishay Semiconductors ORIENTATION IN CARRIER TAPE SOT-323 Unreeling direction Top view Document no.: S8-V-3717.08-002 (4) Created - Date: 09. Feb. 2010 22761 CARRIER TAPE SOT-323 2 0.05 4 0.1 A 1.75 0.1 A-A Section 0.254 0.013 +0.1 2.4 +0.1 +0.3 8 -0.1 3.5 0.05 +0.1 O 1.55 0.0 +0.25 O 1 0.00 B B A 1.19 0.1 4 0.1 B-B Section 2.4 0.1 Document no.: S8-V-3717.08-002 (4) Created - Date: 09. Feb. 2010 22762 Rev. 1.2, 23-Feb-16 Document Number: 85894 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000