Data sheet| Item number:862-2694
4-conductor chassis-mount terminal strip; 4-pole; N-PE-L1-L2; without
ground contact; 4 mm²; 4,00 mm²; white
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /1 9
Dimensions (in mm) for chassis-mount terminal strips
iPicture differs from the item.
Color:
Data
Electrical data
Ratings per IEC/EN 60664-1
Nominal voltage (III/3) 500 V
Rated surge voltage (III/3) 6 kV
Rated current 32 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Connection data
Connection technology Push-in CAGE CLAMP®
Actuation type Operating tool
Push-button
Connectable conductor materials Copper
Solid conductor 0.5 … 4mm²/ 20 … 12AWG
Solid conductor; push-in termination 0.75 … 4mm²/ 18 … 12AWG
Stranded conductor 0.5 … 4mm²/ 20 … 12AWG
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /2 9
Solid conductor; push-in termination 0.75 … 4mm²/ 18 … 12AWG
Stranded conductor 0.5 … 4mm²/ 20 … 12AWG
Fine-stranded conductor 0.5 … 4mm²/ 20 … 12AWG
Fine-stranded conductor; with insulated ferrule 0.5 … 2.5mm²/ 20 … 12AWG
Fine-stranded conductor; with ferrule; push-in termination 0.75mm²/ 18AWG
Note (conductor cross-section) Depending on the conductor characteristic, a conductor with a
smaller cross-section can also be inserted via push-in termination.
Strip length 10 … 11mm/ 0.39 … 0.43inch
Pole No. 4
Total number of connection points 16
Total number of potentials 4
Wiring type Side-entry wiring
Physical data
Pin spacing 12mm/ 0.472inch
Width 48mm/ 1.89inch
Height from the surface 22.3mm/ 0.878inch
Depth 35mm/ 1.378inch
Mechanical data
Marking N--L1-L2
Mounting type Snap-in foot
Material data
Color white
Insulation material Polyamide (PA66)
Flammability class per UL94 V0
Fire load 0.505 MJ
Weight 27.3 g
Commercial data
Packaging type bag
Country of origin DE
GTIN 4044918510332
Customs tariff number 85369010000
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /3 9
Approvals / Certificates
Country specific Approvals
Logo Approval Additional Approval Text
Certificate
name
CCA
DEKRA Certification B.V.
EN 60947 2146425.01
CCA
DEKRA Certification B.V.
EN 60947 NTR NL
6912
CSA
DEKRA Certification B.V.
C22.2 No. 158 1505030
ENEC 15
UL International Germany GmbH
EN 60998 143856-01
Ship Approvals
Logo Approval Additional Approval Text
Certificate
name
DNV GL
Det Norske Veritas, Germanischer Lloyd
- TAE00001V2
LR
Lloyds Register
EN 60947 91/20112
(E9)
UL-Approvals
Logo Approval Additional Approval Text
Certificate
name
UL
UL International Germany GmbH
UL 1059 20190731-
E45172
Compatible products
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /4 9
Compatible products
Jumper
Item no.: 862-482
Jumper; for conductor entry; insulated; black www.wago.com/862-482
ferrule
Item no.: 216-141
Ferrule; Sleeve for 0.5 mm² / 20 AWG; uninsulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 1/08.92
www.wago.com/216-141
Item no.: 216-142
Ferrule; Sleeve for 0.75 mm² / 18 AWG; uninsulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 1/08.92
www.wago.com/216-142
Item no.: 216-143
Ferrule; Sleeve for 1 mm² / AWG 18; uninsulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 1/08.92
www.wago.com/216-143
Item no.: 216-144
Ferrule; Sleeve for 1.5 mm² / AWG 16; uninsulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 1/08.92; silver-colored
www.wago.com/216-144
Item no.: 216-241
Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; white
www.wago.com/216-241
Item no.: 216-242
Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; gray
www.wago.com/216-242
Item no.: 216-243
Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped;
acc. to DIN 46228, Part 4/09.90; red
www.wago.com/216-243
Item no.: 216-244
Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; black
www.wago.com/216-244
Marking accessories
Item no.: 709-177
Marking strips; on reel; 7.5 mm wide; not stretchable; plain; snap-on type; translucent www.wago.com/709-177
Item no.: 709-178
Marking strips; on reel; 7.5 mm wide; not stretchable; plain; snap-on type; white www.wago.com/709-178
tools
Item no.: 210-720
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured www.wago.com/210-720
check
Item no.: 210-136
Test plug; 2 mm Ø; with 500 mm cable; red www.wago.com/210-136
Item no.: 210-137
Test plug; 2.3 mm Ø; with 500 mm cable; yellow www.wago.com/210-137
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /5 9
Downloads
Documentation
Bid Text
862-2694
X81 - Datei
Feb 19, 2019 xml
3.7 kB
Download
862-2694
doc - Datei
Jun 13, 2017 doc
25.6 kB
Download
Additional Information
Technical explanations Apr 3, 2019 pdf
2.2 MB
Download
CAD/CAE-Data
CAD data
2D/3D Models 862-2694 URL Download
CAE data
WSCAD Universe 862-2694 URL Download
ZUKEN Portal 862-2694 URL Download
EPLAN Data Portal 862-2694 URL Download
Installation Notes
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /6 9
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /7 9
Cost-effective features:
WAGO’s 862 Series Chassis-Mount Terminal
Strips were developed specifically to
minimize wiring costs, while accommodating
requirements for flexible mounting, multiple
connection points and easy handling:
Equipped with Push-in CAGE
CLAMP®, the 862 Series connects
up to four conductors sized 0.5 …
4mm² (20 … 12 AWG). Due to
multiple connection points per pole,
different conductor sizes can be
used within the same terminal block
position.
For factory wiring, Push-in CAGE
CLAMP® Connection Technology
allows solid conductors, fine-
stranded conductors with ferrules or
ultrasonically bonded conductors
from 0.5 … 4mm² (20 … 12 AWG) to
be terminated by simply pushing
them into unit (length of bonded
conductor end: min. 10 mm).
Convenient automatic grounding
contact optional Snap-in mounting
feet for fast assembly
Push-buttons for easy installation
with an operating tool or by hand
Built-in test points simplify testing
with 2 mm Ø test plug.
Flexible marking options with
standard marking (pre-marked),
marking strip or custom marked for
large orders
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /8 9
Testing
Testing with a 2mmØ test plug.
Commoning
Commoning using a comb-style jumper bar
(862‑482).
Conductor termination
Inserting a conductor via push-button.
Terminating four conductors per pole – solid
and fine-stranded.
Data sheet| Item number:862-2694
www.wago.com/862-2694
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
07.02.2021Page /9 9
Marking
Marking by direct, one-side printing and/or
marker strips
Dimensions inmm