ZXGD3003E6Q 40V 5A GATE DRIVER IN SOT26 Description Features The ZXGD3003E6Q is a high-speed, non-inverting single gate driver designed for switching MOSFETs or IGBTS. It can transfer up to 5A peak source/source current into the gate for effective charging and discharging of the capacitive gate load. This gate driver ensures rapid switching of the MOSFET to minimize power losses and distortion in high current switching applications. It can typically drive 1.5A into the low gate impedance with just 10mA input from a controller. The turn-on and turn-off switching behaviour of the MOSFET can be individually tailored to suit an application. By defining the switching characteristics appropriately, EMI and cross conduction can be reduced. Applications Gate Driving Power MOSFET and IGBTs in: AC-DC Power Supplies (SMPS) DC-DC Converters DC-AC Inverters (i.e. Solar) 1, 2 and 3-Phase Motor Control Circuits Amplifier Output Stages High-Gain Buffer with Typically 1.5A Output from 10mA Input 5 Amps Peak Output Current 40V Supply for +20V to -18V Gate Driving to Prevent dV/dt Induced False Triggering and Minimize On-Losses Emitter-Follower that is Rugged to Latch-Up/Shoot-Though Fast Switching Emitter-Follower Configuration: 2ns Propagation Delay Time 9ns Rise/Fall Time, 1000pF Load Optimized Pin-Out to Simplify PCB Layout and Reduce Parasitic Trace Inductances Near-Zero Quiescent Supply Current Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) The ZXGD3003E6Q is suitable for automotive applications requiring specific change control; this part is AEC-Q101 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. https://www.diodes.com/quality/product-definitions/ Mechanical Data Case: SOT26 Case Material: Molded Plastic. "Green" Molding Compound; UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.018 grams (Approximate) SOT26 Top View Top View Pin-Out Pin Name Pin Function VCC Supply Voltage High IN1 & IN2 Driver Input * VEE Supply Voltage Low SOURCE Source Current Output ** SINK Sink Current Output ** * Typically connect IN1 & IN2 together ** Typically connect SOURCE & SINK together Ordering Information (Note 4) Product ZXGD3003E6QTA Notes: Compliance Automotive Marking 3003 Reel Size (inches) 7 Tape Width (mm) 8 Quantity per Reel 3,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 1 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q Marking Information SOT26 3003 = Product Type Marking Code YM = Date Code Marking Y or Y = Year (ex: H = 2020) M or M = Month (ex: 9 = September) 3003 Date Code Key Year Code Month Code 2018 F 2019 G 2020 H 2021 I 2022 J 2023 K 2024 L 2025 M 2026 N 2027 O 2028 P 2029 R Jan Feb Mar Apr May Jun Jul 1 2 3 4 5 6 7 Aug 8 Sep 9 Oct O Nov N Dec D Typical Application Circuit VS VCC RLOAD Controller V CC VCC R1 IN1 SOURCE ZXGD3003E6Q ZXGD3003 IN2 SINK D1 VEE VEE R2 R1, D1 combination can be used for variable turn on and turn off times. ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 2 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q Absolute Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Supply Voltage, with Respect to VEE Symbol Value Unit VCC 40 V VIN 40 V V(source-sink) 7 V IOM 5 A IIN1, IIN2 1 A Symbol Value Unit PD 1.1 8.8 W mW/C Thermal Resistance, Junction to Ambient (Notes 5 & 6) RJA 113 Thermal Resistance, Junction to Lead (Note 7) RJL 105 TJ, TSTG -55 to +150 Input Voltage, with Respect to VEE Output Difference Voltage (Source - Sink) Peak Pulsed Output Current (Source - Sink) Peak Pulsed Input Current Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Power Dissipation (Notes 5 & 6) Linear Derating Factor Operating and Storage Temperature Range C/W C ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Electrostatic Discharge - Charged Device Model Notes: Symbol ESD HBM ESD MM ESD CDM Value 4,000 400 1,000 Unit V V V JEDEC Class 3A C IV 5. For a device mounted on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR-4 PCB; device is measured under still air conditions whilst operating in a steady-state. The heatsink is split in half with the pin 1 (VCC) and pin 3 (VEE) connected separately to each half. 6. For device with two active die running at equal power. 7. Thermal resistance from junction to solder-point at the end of each lead on pin 1 (VCC) and pin 3 (VEE). 8. Refer to JEDEC specification JESD22-A114, JESD22-A115 and JESD22-C101. ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 3 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q Electrical Characteristics (@TA = +25C, unless otherwise specified.) Symbol Min Typ Max Output Voltage, High Characteristic VOUT(hi) -- VIN1 - 0.4 -- Output Voltage, Low VOUT(low) -- VIN1 + 0.4 -- Source Output Leakage Current IL(source) -- -- 1 A VCC = 40V, VIN1 = VIN2 = 0V IL(sink) -- -- 1 A VCC = 40V, VIN1 = VIN2 = VCC IQ -- -- 20 nA VCC = 32V, VIN1 = VIN2 = 0V I(source)M 1 1.6 -- A IIN1 + IIN2 = 10mA I(sink)M 1 1.4 -- A IIN1 + IIN2 = -10mA I(source)M -- 5 -- A IIN1 + IIN2 = 500mA I(sink)M -- 5 -- A IIN1 + IIN2 = -500mA -- 1.8 8.9 1.7 8.9 ns VCC = 12V, VEE = 0V, VIN = 0 to 10V, CL = 1nF, RL = 1, RIN = 25 -- 4 77 4 85 ns VCC = 12V, VEE = 0V, VIN = 0 to 10V, CL = 1nF, RL = 1, RIN = 1k Sink Output Leakage Current Quiescent Supply Current Peak Pulsed Source Output Current Peak Pulsed Sink Output Current Peak Pulsed Source Output Current Peak Pulsed Sink Output Current Gate Driver Switching Times Gate Driver Switching Times td(rise) tr td(fall) tf td(rise) tr td(fall) tf -- -- Unit V Test Condition Isource = 1A Isink = 1A Switching Test Circuit and Timing Diagram VCC ZXGD3003E6Q VEE ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 4 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q Typical Gate Driver Characteristics (@TA = +25C, unless otherwise specified.) ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 5 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q Typical Gate Driver Characteristics (continued) ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 6 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SOT26 D E1 SOT26 Dim Min Max Typ A1 0.013 0.10 0.05 A2 1.00 1.30 1.10 A3 0.70 0.80 0.75 b 0.35 0.50 0.38 c 0.10 0.20 0.15 D 2.90 3.10 3.00 e 0.95 e1 1.90 E 2.70 3.00 2.80 E1 1.50 1.70 1.60 L 0.35 0.55 0.40 a 8 a1 7 All Dimensions in mm E b a1 e1 A2 A3 A1 Seating Plane e L c a Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT26 C1 Y1 G C Dimensions Value (in mm) C 2.40 C1 0.95 G 1.60 X 0.55 Y 0.80 Y1 3.20 Y X ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 7 of 8 www.diodes.com February 2020 (c) Diodes Incorporated ZXGD3003E6Q IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2020, Diodes Incorporated www.diodes.com ZXGD3003E6Q Document Number DS40797 Rev. 2 - 2 8 of 8 www.diodes.com February 2020 (c) Diodes Incorporated