1
http://www.kamaya.co.jp
2Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Chip R esistors
General purpose
http://www.kamaya.co.jp
RMC
L
cc
W
dd
H
Rated resistance value marking is 3-digit on the over coating except RMC1/16S & RMC1/20 & RMC1/32.
4-digit marking is available for F & G tolerance except RMC1/16, RMC1/16S & RMC1/20 & RMC1/32 type.
•Dimensions
01005 to 2512 inch size and Jumper chip available.
Precise dimension by Laser-scriber method(RMC1/20,RMC1/32).
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
Walsin Technology Corporation OEM products (1206 to 0402 inch) are also available.
•Features
•Ratings
Example
•Part Number Description
103
RMC 1/10
Style
KF TP
Product Type
Rated Dissipation & Size
Code
1/16S
Metric
1005
1608
2012
3216
3225
5025
6332
1/20 0603
Inch
0402
0603
0805
1206
1210
2010
2512
0201
0.05W
1/32 0402 01005
0.03W
1/16 0.1W
1/10 0.125W
1/8 0.25W
0.5W
1/4
1/2 0.75W
1 1.0W
Rated Dissipation
Tolerance on Rated Resistance
F
None
1%
GResistor
Jumper
2%
J 5%
K10%
*Packaging & Standard Qty. (Min.)
Bulk (Loose Package)B All Styles
*Refer to Tape and Packaging information on pages 22 and 23.
*
Please contact Kamaya sales department for 1mm pitch taping of RMC1/16s, 1/20.
Temperature Coefficient of Resistance
–
None
Standard
KResistor
Jumper
100×10-6/°C
Rated Resistance
JP
4-Digit
E96 Series
e.g. : 10R2=10.2 ohm
1002=10k ohm
3-Digit
E24 Series
e.g. : 2R2=2.2 ohm
103=10k ohm
Resistor
Jumper
PA
Press-Pocket
Paper Tape (2 mm pitch)
TH Paper Tape
(2 mm pitch)
RMC1/16S
RMC1/16
Paper TapeTP
RMC1/16
RMC1/10
RMC1/8
Embossed TapeTE
RMC1/4
RMC1/2
RMC1
Bulk CaseBA
RMC1/16
RMC1/10
RMC1/8
1,000pcs.
10,000pcs.
5,000pcs.
4,000pcs.
25,000pcs.
10,000pcs.
5,000pcs.
RMC1/32
20,000pcs.
RMC1/20
15,000pcs.
Unit : mm
*Values for reference
Note1. E24 series is available , E96 series is available for tolerance"F"(1%)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note3. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note4. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
Note5. Jumper : Resistance value is less than 50m ohm.
6.30.15 40mg
5.00.15 25mg
3.20.15 16mg
3.20.15
3.10.1 9mg
2.00.1 5mg
1.60.1 2mg
1.00.05 0.6mg
0.16mg
Style WLMetric Inch Product Hcd
*Unit weight/pc.
0.60.03
0.035mg
0.40.02
RMC1/10
RMC1/16
RMC1/16S
RMC1/20
RMC1/32
KAMAYA
KAMAYA
KAMAYA
WALSIN
KAMAYA
WALSIN
KAMAYA
WALSIN
KAMAYA
WALSIN
KAMAYA
KAMAYA
KAMAYA
RMC1/8
RMC1/4
RMC1/2
RMC1
0603
0402
1005
1608
2012
3216
3225
5025
6332
0201
01005
0402
0603
0805
1206
1210
2010
2512 0.15
0.15
0.15
0.15
0.10
0.5 0.05
0.3 0.03
0.15
0.05
0.8
1.25
1.6
0.1
1.6
2.5
2.5
3.2
0.2 0.02
0.550.15
0.550.15
0.550.15
0.550.10
0.6 0.15
0.550.10
0.450.10
0.350.05
0.230.03
0.130.02
0.6 0.2
0.6 0.2
0.5 0.25
0.5 0.25
0.45 0.20
0.4 0.2
0.3 0.1
0.2 0.1
0.1 0.05
0.08 0.03
0.2
0.2
0.25
0.25
0.2
0.1
0.05
0.10
0.25
0.3
0.05
0.15
0.03
0.1
0.4
0.5
0.5
0.6
0.2
0.5
0.6
Please refer to Specification (Reference) at the
Website for Marking.
1〜9.76
10〜1M
0.33〜0.91
1.1M〜22M
1〜9.76
10〜1M
0.33〜0.91
11M〜24M
1.02M〜10M
1〜9.76
10〜1M
0.22〜0.91
11M〜22M
1.1M〜22M
1.02M〜10M
1〜9.76
10〜1M
0.2〜0.91
RMC1/16S
RMC1/20
RMC1/16
RMC1/10
RMC1/8
RMC1/4
RMC1/2
RMC1
0.05
(1.0A)
0.125
(2.0A)
0.25
(2.0A)
0.5
(2.0A)
0.75
(2.0A)
1.0
(2.0A)
50
100
500
−55〜＋155
−55〜＋125
0.47〜0.91
0.47〜0.91
0.27〜0.91
1〜9.76
1〜9.76
1〜9.76
4.7〜9.1
10〜91
100〜1M
10〜2.2M
2.21M〜10M
1.1M〜10M
1.02M〜10M
11M〜22M
11M〜22M
＋1000〜＋300
＋500〜−200
＋500〜−200
＋500〜−200
＋500〜−200
＋1,000〜＋300
＋1,000〜＋300
＋1,000〜＋300
±200
±200
±200
±200
±200
±200
±200
±100
±100
±100
±200
±200
±100
＋500〜−200
＋1,000〜＋300
±200
±200
±100
＋500〜−200
＋1,000〜＋300
±200
±200
±100
＋500〜−200
＋1,000〜＋300
±200
±200
±100
−
±300
＋600〜−200
±200
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
K
K
K
K
K
K
K
25
15
50
150
200
0603
（0201）
RMC1/32
0.03
(0.5A)
0402
（01005）
1005
（0402）
1608
（0603）
2012
（0805）
3216
（1206）
3225
（1210）
5025
（2010）
6332
（2512）
10〜1M
Style
Rated Dissipation
at 70°C
W
Rated Resistance Range Isolation
Voltage
V
Category
Temperature
Range
°C
1101001M10M
Temperature Coefficient
of Resistance
Code
Tolerance
on Rated
Resistance
Limiting
Element
Voltage
V
Size
Metric
(Inch)
10〜10M
0.1
(1.0A)
0.1
(2.0A)
10〜1M
＋600〜−200
＋350〜−100
−
−
4.02〜9.76
1〜3.92
10-6/°c
F
,
J
F, G, J
F, J
F, J
G, J
F
F, G, J
K
F, G, J
G, J
F
J
K
F, G, J
G, J
F
F, G, J
J
K
F, G, J
G, J
F
F, G, J
J
K
F, J
G, J
F
F, G, J
J
K
F, J
G, J
F
J
K
F, J
G, J
F
J
J
F, J
Antimony Free
Halogen Free
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】3
Chip R esistors
General purpose
http://www.kamaya.co.jp
RGC
Rated resistance value is maked with 3-digit (E24) or
4-digit (E96) on the over coating.
RNC06: only No marking is available.
RNC
W
dd
L
cc
H
•Dimensions
Suitable for precision applications.
High stabilized characteristics and Performance equivalent to thin film chip resistors.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
Line up, 01005 sizes resistor.
•Features
•Ratings •Part Number Description
Example
W
dd
L
cc
H
Rated resistance value marking is with 3-digit (E24) or 4-digit (E96) on the over coating.
RGC1/16 : only 3-digit marking is available.
RGC1/16S,1/20,1/32 : only No marking is available.
Unit : mm
*Values for reference
RGC1/8 0.15 3.20.15 0.1 0.25 0.25 9mg
5mg
2mg
0.6mg
RGC1/10 1.25 0.102.00.1 0.1 0.2 0.2
RGC1/16 1.60.1 0.45 0.10 0.25 0.10 0.1
0.05
RGC1/16S 0.05 1.00.051005
1608
2012
3216
0.35 0.05 0.1 0.05
0.10
Style
WLMetric
0402
0603
0805
1206
Inch Hcd
*Unit weight/pc.
0.25
0.15
0.05
0.8
0.5
1.6
0.6
0.6
0.2
0.16mgRGC1/20 0.03 0.60.030603 0.23 0.03 0.050201 0.150.3 0.1
0.03 0.035mgRGC1/32 0.02 0.40.020402 0.13 0.02 0.0301005 0.1 0.2 0.08
0.4
0.5
0.3
0.4
0.5
TH
BAll Styles
TP
BA
DTP
RGC 1/16
Product Type
Style
C473
Rated Dissipation & Size
Code
Rated Dissipation
Metric
1/16S 0.063W 1005
1608
2012
3216
Inch
0402
1/32 0.03W 0402 01005
1/20 0.05W 0603 0201
0603
0805
1206
1/16
1/10
1/8
0.125W
(0.1W)
0.25W
(0.125W)
Temperature Coefficient of Resistance
C 50×10-6/°C
K100×10-6/°C
Tolerance on Rated Resistance
D0.5%
F1.0%
RGC1/16S
RGC1/16
RGC1/10
RGC1/8
RGC1/16
RGC1/10
RGC1/8
Rated Resistance
4-Digit
E96 Series
e.g. : 7152=71.5k ohm
3-Digit
E24 Series
e.g. : 473=47k ohm
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
Paper Tape (2 mm pitch)
Paper Tape
Bulk Case
1,000pcs.
PA RGC1/32
Press-Pocket
Paper Tape (2mm pitch)
20,000pcs.
10,000pcs.
5,000pcs.
25,000pcs.
10,000pcs.
5,000pcs.
0.1W
(0.063W)
ⴱIf Category Temperature
Range is "–55~+155", Rated
Dissipation is applied to in ( ).
ⴱ1 If Category Temperature Range is "–55~+155", Rated Dissipation is applied to in ( ).
Style
Size
Metric
(Inch)
Limiting Element
Voltage
V
100
50
50
100
100
50
100
50
50
K
K
K
C
C
C
100
50
K
C
K
C
C
Temperature Coefficient
of Resistance
Tolerance on
Rated Resistance
Rated Resistance Range
101001k1M
Isolation
Voltage
V
Category Temperature
Range
°C
50
150
200
D(0.5%)
F(1%)
D(0.5%)
D(0.5%)
F(1%)
D(0.5%)
F(1%)
F(1%)
D (0.5%), F (1%)
F(1%)
D (0.5%), F (1%)
Rated Dissipation
at 70°C
W
0.1
ⴱ
1
(0.063)
0.125
ⴱ
1
(0.1)
0.063
0.25
ⴱ
1
(0.125)
RGC1/16S
RGC1/16
RGC1/10
RGC1/8
100
55125
ⴱ
1(
55155
)
55155
25
15
50 55125
10-6/°cCode
1097.6
1001M
100100k
51976
1k1M
1.02M3.3M
3.39.76
1097.6
1001M
1.02M3.3M
3.3
9.76
3.3
9.76
104.7M
103.3M
1005
(0402)
0.05
RGC1/20
0603
(0201)
1608
(0603)
2012
(0805)
3216
(1206)
0.03
RGC1/32
0402
(01005)
Note1. E24, E96 are avaialable for "F"(1%) and "D"(0.5%)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note3. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note4. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
•Dimensions
Suitable for high precision, higher stability and reliability applications.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
New line up minimum sizes resistor 0201inch.
•Features
•Ratings •Part Number Description
Example
RNC32 3.10.1 0.450.20
RNC20 2.00.15 0.6 0.1
0.6 0.1
0.22012
3216
Style WLMetric
0805
1206
Inch Hc
9mg
5mg
RNC06 0.60.03 0.030.3 0.230.03 0.150.050603 0201 0.16mg
0.10
0.05
1.25
0.10
0.05
1.55
d
0.2
0.1
0.3
0.2
0.1
0.3
0.4
0.050.1
Unit : mm
*Values for reference
*Unit weight/pc.
1002
RNC 32
Product Type
Style
EBTP
Size
Code
Metric
32 3216
Temperature Coefficient of Resistance
C50×10-6/°C
E25×10-6/°C
Tolerance on Rated Resistance
B
C
D
0.1%
0.25%
0.5%
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)B
Paper Tape
1,000pcs.
5,000pcs.
TP
Press-Pocket
Paper Tape (2mm pitch)
15,000pcs.
PA
All Styles
RNC20
RNC32
RNC06
*Refer to Tape and Packaging
information on pages 22 and 23.
Rated Resistance
4-Digit
3-Digit
E24 Series
e.g. : 103=10k ohm
E96 Series
e.g. : 10R2=10.2 ohm
1002=10k ohm
Inch
0805
1206
06 0603
20 2012
0201
*Refer to Tape and Packaging information on
pages 22 and 23.
*Please contact Kamaya sales department for
1mm pitch taping of RGC1/16s, 1/20.
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors when the resistance value
is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
RNC20
0.1
0.125
RNC32
150
75
15
25
25
25
50
E
C
E
E
Code
E96
E24
100
50
55125
3216
(1206)
2012
(0805)
RNC06
0.03
0.05
0603
(0201)
Style
Rated Dissipation
at 70°C
W
Limiting Element
Voltage
V
Temperature Coefficient
of Resistance
10-6/°C
Preferred Number
Series for
Resistors
Isolation
Voltage
V
Category Temperature
Range
°C
Size
(Inch)
Metric
100130k
5.1k10k
47
4.99
k
1001k
10130k
100180k
10180k
B (0.1%)
B (0.1%)
D (0.5%)
C (0.25%)
D (0.5%)
B (0.1%)
C (0.25%)
D (0.5%)
Tolerance on
Rated Resistance
Rated Resistance
Range
RGC1/20
15,000pcs.
NEW
NEW
NEW
Antimony Free
Halogen Free
Antimony Free
Pb Free
Halogen Free
NEW
Rated resistance is marked with 3-digit (E24)
or 4-digit (E96) on the over coating.
RVC16 : only 3-digit marking is available.
RVC63 0.156.30.15 0.550.15 0.2 40mg
RVC50 0.155.00.15 0.550.15 0.2 25mg
RVC32 3.20.15 0.550.10 0.25 9mg
RVC20 1.250.102.00.1 2012
3216
5025
6332
0.550.10 5mg
2mg
Style WLMetric
0805
1206
2010
2512
Inch Hcd
RVC16
1.6 0.15
1.60.1 1608 0.450.100603 0.15
0.05
0.8
L
cc
W
dd
2.5
3.2
0.5
0.20.4
0.10.3
0.6
0.60.2
0.2
0.250.5
0.20.4
0.10.3
0.6
0.6
H
RVC
Unit : mm
*Values for reference
*Unit weight/pc.
•Ratings
•Dimensions
Higher Limiting Element Voltage compared with RMC series.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Ratings
•Dimensions
Suitable for the backlight inverter for large-screen LCD.
Higher Limiting Element Voltage than RVC series.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Note1. E24 series is available , E96 series is available for tolerance "D" (0.5%) and "F" (1%)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note3. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note4. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
RVC16
RVC20
RVC32
RVC50
RVC63
0.1
0.25
0.25
0.5
1.0
200 100
10010M
400
500
800
200
100
200
100
200
100
200
100
+500200
200
K
100k4.7M
K
K
K
K
10051M
100
500
55125
10010M
10051M
47020M
47051M
56020M
470
47
47
47
47
100
47
10M
464
97.6
97.6
464
549
97.6
56051M
1608
(0603)
2012
(0805)
3216
(1206)
5025
(2010)
6332
(2512)
Style
Combinations of Rated Resistance Range and Tolerance on Rated Resistance
F(1%) , G(2%)D(0.5%) J(5%) , K(10%)
Rated Dissipation
at 70°C
W
Limiting Element
Voltage
V
Temperature Coefficient
of Resistance
Isolation
Voltage
V
Category Temperature
Range
°C
10-6/°C
Code
Size
(Inch)
Metric
RVC 32
Product Type
Style
K475 FTP
Tolerance on Rated Resistance
F 1%
D 0.5%
G 2%
J 5%
K10%
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
RVC50
RVC63
B
Paper Tape
TP
RVC16
RVC20
RVC32
Embossed Tape
TE
*Refer to Tape and Packaging information
on pages 22 and 23.
All Styles
1,000pcs.
5,000pcs.
4,000pcs.
Size
Code
Metric
16 1608
32 3216
50 5025
20 2012
63 6332
Inch
0603
1206
2010
0805
2512
Temperature Coefficient of Resistance
K
100×10-6/°C
–
Standard
Rated Resistance
4-Digit
E96 Series
e.g. : 7154=7.15M ohm
3-Digit
E24 Series
e.g. : 475=4.7M ohm
•Part Number Description
Example
•Part Number Description
Example
RZC
Standard―
Bulk (Loose Package)
B
* Packaging & Standard Qty. (Min.)
Paper Tape
1,000pcs.
4,000pcs.
TE
RZC63 3.20.156.30.15
Unit : mm
*Values for reference
0.550.15 0.60.2 0.60.2
RZC50 2.50.155.00.15 0.550.15 0.50.2 0.60.25025
6332
Style WLMetric
2010
2512
Inch Hcd
40mg
25mg
*Unit/weight/pc.
Tolerance on Rated Resistance
Rated Resistance
± 5%J
±10%K
±20%M
e.g.:105=1.0M ohm
  475=4.7M ohm
166=16M ohm
W
dd
L
cc
H
Rated resistace is marked with 3-digit(E24) on the over coating.
RZC 50
Product Type
Style
475
Temperature Coefficient of Resistance
JTE
Size
Code
Metric
50 5025
63 6332
Inch
2010
2512
All Styles
All Styles
RZC50
1.0
RZC63
Style
2000
1500
Anti-Rush
Voltage
Charactoristics
V
Temperature Coefficient
of Resistance
10-6/°C
3000 200
E24
Tolerance on
Rated Resistance
Rated Resistance
Range
Preferred Number
Series for
Resistors
Isolation
Voltage
V
500
Category Temperature
Range
°C
55〜＋125
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors, when the resistance values is equal to or higher than the critical resistance value.
Note3. Anti-Rush Voltage Charactoristics : 3,000V, 1sec "On", 9sec"off" ,100,000 times, Room temperature.
6332
(2512)
5025
(2010) 0.5 J(5%)
K(10%)
M(20%)
Rated Dissipation
at 70°C
W
Limiting Element
Voltage
V
Size
(Inch)
Metric
1.0M〜16M
*Refer to Tape and Packaging information
on pages 22 and 23.
4Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Chip R esistors
High Voltage
http://www.kamaya.co.jp
Antimony Free
Halogen Free
Antimony Free
Halogen Free
•Dimensions
Rated resistance value is marked with 3-digit on the over coating.
RPC
0.15 6.30.15 0.550.15 0.30.15 40mg
0.15 5.00.15 0.550.15 0.30.15 25mg
0.15 3.20.15 0.550.10 0.30.2 9mg
RPC63
0.102.00.1 0.550.10 0.30.2 5mg
RPC50
RPC32 3216
5025
6332
Style WLMetric
1206
0.15 3.20.15 0.550.15 0.30.2 16mgRPC35 3225 1210
2010
2512
Inch Hcd
RPC20 2012 0805
L
cc
W
dd
1.25
1.6
2.5
2.5
3.2
0.40.2
0.50.25
0.50.25
0.60.2
0.60.2
H
Unit : mm
*Values for reference
*Unit weight/pc.
Higher Anti surge performance compared with RMC series.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
BAll Styles
TP
TE
JTE
RPC 50
Product Type
Style
103
Size
Code Metric
20 2012
3216
5025
6332
Inch
0805
1206
2010
2512
32
50
63
Tolerance on Rated Resistance
J± 5%
K±10%
M±20% RPC35
RPC50
RPC63
RPC20
RPC32
Rated Resistance
3-Digit
E24 Series
e.g. : 2R2=2.2 ohm
103=10k ohm
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
Paper Tape
Embossed Tape
1,000pcs.
5,000pcs.
4,000pcs.
*Refer to Tape and Packaging information on pages 22 and 23.
•Part Number Description
3225 121035
•Ratings
* pulse limiting power curve is different from resistance value.
* Please contact Kamaya sales department for the details.
Pulse limiting power (w)
Pulse duration (ms)
1
10
100
1,000
10,000
1 10 100 1,000
Example
•1Pulse Limiting Power Curve Comparison (e.g 100value for reference)
RPC32
RPC20
RPC35
RPC50
RPC63
0.125
0.25
0.5
0.75
1.0
150
200
E24 500
55155
2012
(0805)
3216
(1206)
3225
(1210)
5025
(2010)
6332
(2512)
Style
Rated Dissipation
at 70°C
W
Limiting Element
Voltage
V
Preferred Number
Series for
Resistors
Isolation
Voltage
V
Category Temperature
Range
°C
Size
(Inch)
Metric
Tolerance on
Rated Resistance
Combinations of Rated Resistance Range and
Temperature Coefficient of Resistance
Temperature Coefficient
of Resistance 10-6/°C
Rated Resistance
Range
J( 5%)
K(10%)
M(20%)
100
200
0.270.91
1 1M
2001.1M22M
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors, when the resistance value is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
Pulse limiting power (w)
Pulse duration (ms)
1
10
100
1,000
10,000
1 10 100 1,000
RPC63
RPC50
RPC35
RPC32
RPC20
RPC63
RPC50
RPC35
RPC SeriesRPC Series
RPC32
RPC20
RMC1
RMC1/2
RMC1/4
RMC1/8
RMC1/10
RMC1
RMC1/2
RMC1/4
RMC1/8
RMC1/10
RMC SeriesRMC SeriesRMC Series
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】5
Chip R esistors
Surge
http://www.kamaya.co.jp
Antimony Free
Halogen Free
•Dimensions
Most suitable for a detection of current in power source circuits, motor circuits, etc.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Part Number Description
•Ratings
Example
RLC
Rated resistance is marked with 4-digit on the over coating. (RLC20~RLC63)
RLC10 : only No marking is available.
Please contact KAMAYA for marking of RLC16.
RLC32 3.10.2 0.1 0.50.25
2.00.15 0.1 0.40.2
3216
WL
1.25 0.10
0.15
0.15
0805
1206
Hc
0.4 0.2
d
0.2
0.1
0.1
0.3
0.05
0.10
0.25
RLC35 3.10.2 0.6 0.15 0.50.25
9mg
5mg
16mg3225 1210 0.2
0.3
1.6
2.5
0.15RLC50 5.00.2 0.6 0.15 0.60.2 0.6 0.2 25mg2.5
0.15RLC63 6.30.2 0.6 0.15 0.60.2 0.6 0.2 40mg3.2
0.6
RLC20
0.05
RLC10 1.00.05 0.20.1 0.6mg
0.6
0.050.35
RLC16 1.60.1 0.30.1 0.3 0.1
0.15
0.05
0.8 2mg0.100.45
W
dd
L
cc
H
0.5
Unit : mm
*Values for reference
Style Metric Inch
*Unit weight/pc.
5025 2010
6332 2512
2012
1005 0402
1608 0603
RLC 32
Style
KR470 TPF
Product Type
Tolerance on Rated Resistance
F1%
G2%
J5%
e.g.: R050=50m ohm
R100=100m ohm
1R00=1 ohm
100=10 ohm
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
RLC35
RLC50
RLC63
B
Paper Tape
TP
RLC16
RLC20
RLC32
RLC10
Embossed Tape
TE
*Refer to Tape and Packaging information on pages 22 and 23.
All Styles
1,000pcs.
5,000pcs.
Paper Tape(2mm pitch)
TH
10,000pcs.
4,000pcs.
Rated Resistance
Temperature Coefficient of Resistance
–
K
10010-6/°C
020010-6/°C
025010-6/°C
030010-6/°C
Code Metric Inch
Size
16 1608
10 1005
32 3216
50 5025
20 2012
35 3225
63 6332
0603
0402
1206
2010
0805
1210
2512
82m
100m
110m
120m
130m
150m
160m
180m
R090
R100
90m
R09191m
R082
R110
R120
R130
R150
R160
R180
200m
240m
250m
270m
300m
330m
360m
400m
R200
R220220m
R240
R250
R270
R300
R330
R360
R390390m
R400
430m
470m
510m
560m
620m
650m
680m
700m
R430
R470
R500500m
R510
R560
R600600m
R620
R650
R680
R700
750m
820m
910m
1.0
1.1
1.2
1.3
1.5
R750
R800
R900
800m
900m
R820
R910
1R00
1R10
1R20
1R30
1R50
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
•Rated Resistance
Note3. Other nominal resistances values are also available, please contact KAMAYA for further information.
Resistance Code Resistance Code Resistance Code Resistance Code Resistance Code Resistance Code Resistance Code
51m
56m
62m
65m
68m
70m
75m
80m
R05050m
R051
R056
R06060m
R062
R065
R068
R070
R075
R080
4R30
4R70
5R10
5R60
6R20
6R80
7R50
8R20
9R10
100
1R60
1R80
2R00
2R20
2R40
2R70
3R00
3R30
3R60
3R90
Note1. Rated Current = (Rated Dissipation)/(Rated Resistance) Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note3. Limiting Element Voltage*1 is set up on RLC16, 20, 32, and rated current is not applied in the range of following rated of Resistance*2.
   *1 RLC16=1.41V, RLC20=1.58V, RLC32=1.81V    *2 RLC16 and RLC20：7.5＜R , RLC32：6.2＜R
   The Rated Current in the above range of the Rated Resistance Value is calculated as below way.
   Rated Current=Limiting Element Voltage/Rated Resistance
RLC16
RLC10
100m10
50m10
100m10
0.25
0.125
RLC20
50m3.3
0.33
RLC32 0.5
RLC35 0.66
RLC50 0.75
RLC63 1.0
500
100
55125
0.141.58
0.111.11
0.152.56
0.183.16
0.443.63
0.473.87
0.554.47
100m220m
240m430m
470m3.3
3.610
0300
J
F, J
F, G, J
F, J
0200
1005
(0402)
1608
(0603)
2012
(0805)
3216
(1206)
3225
(1210)
5025
(2010)
6332
(2512)
Style
Rated Dissipation
at 70°C
W
Rated Current
Range
A
Rated
Resistance
Range
Combinations of Rated Resistance Range,Temperature
Coefficient of Resistance and Tolerance on Rated Resistance
Rated Resistance
Range
Temperature Coefficient
of Resistance 10-6/°C
Tolerance on
Rated Resistance
Isolation
Voltage
V
Category Temperature
Range
°C
Size
(Inch)
Metric
100
100m180m
200m430m
470m3.3
3.610
0250
F, G, J
F, G, J
F, G, J
F, J
0200
100
50m180m
200m430m
470m3.3
3.610
0250
F, G, J
F, G, J
F, G, J
F, J
0200
100
50m180m
200m430m
470m3.3
0250
F, G, J
F, G, J
F, G, J
0200
100
6Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Chip R esistors
Sensing
http://www.kamaya.co.jp
Antimony Free
Halogen Free
•Rated Resistance
Please contact Kamaya Sales Dept. for any other resistance values.
Resistance
Code
10m
15m
20m
22m
24m
25m
27m
30m
33m
36m
R010
R015
R020
R022
R024
R025
R027
R030
R033
R036
Mark
010
015
020
022
024
025
027
030
033
036
39m
40m
43m
47m
50m
51m
56m
60m
62m
65m
R039
R040
R043
R047
R050
R051
R056
R060
R062
R065
039
040
043
047
050
051
056
060
062
065
68m
70m
75m
80m
82m
90m
91m
100m
R068
R070
R075
R080
R082
R090
R091
R100
068
070
075
080
082
90
091
R10
Resistance
Code Mark
Resistance
Code Mark
Note1. Rated Current = (Rated Dissipation)/(Rated Resistance)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
•Ratings
RCC10 1.112.230.125
RCC06 1.02.230.1
100
50
500
55125
0+350
51m100m150
10m 30m
10m 27m0+250
30m 50m150
F (1%)
J (5%)
J (5%)
1005
(0402)
0603(0201)
RCC16 1.585.000.25
1608
(0603)
RCC20 2.565.74
0.33
2012
(0805)
RCC32 2.235.00
0.5
3216
(1206)
20m 33m0+250
36m100m100
Style
Rated Dissipation
at 70°C
W
Rated Current
Range
A
Isolation
Voltage
V
Category Temperature
Range
°C
Size
(Inch)
Metric
Combination of Rated Resistance Range and
Temperature Coefficient of Resistance
Rated Resistance
Range
Temperature Coefficient
of Resistance 10-6/°C
Tolerance on
Rated Resistance
0+350
33m 50m0+250
51m100m150
25m 50m
0+500
20m100m
New lineup, 0201 & 1206 Size, Lower than 50m.
Suitable for current sensing of small mobile devices.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
RCC
RLS
•Dimensions
Suitable for current detection of high-precision circuits.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Ratings •Part Number Description
Example
Rated resistance value is marked with 4-digit on the over coating.
RLS63 3.20.156.30.2 0.60.15 0.60.2 0.60.2
RLS50 2.50.155.00.2 0.60.15 0.60.2 0.60.25025
6332
WL
2010
2512
Hcd
40mg
25mg
W
dd
L
cc
H
Unit : mm
*Values for reference
Style Metric Inch
*Unit weight/pc.
RLS 50
Style
R050 F TE
Product Type * Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
B
Paper Tape
1,000pcs.
4,000pcs.
TE
*Refer to Tape and Packaging information
on pages 22and 23.
Tolerance on Rated Resistance
±1%F
±2%G
±5%J
e.g.: R050=50m ohm
R100=100m ohm
Rated Resistance
Size
Code
Metric
50 5025
63 6332
Inch
2010
2512
Note1. Rated Current = (Rated Dissipation)/(Rated Resistance)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
RLS50
1.936.12
0.75
RLS63
1.0
0350
500 55125
F(1%)
G(2%)
J(5%)
2.237.07
0200
0150
5025
(2010)
6332
(2512)
Style Rated Resistance
Range
Temperature Coefficient
of Resistance 10-6/°C
Tolerance on
Rated Resistance
Isolation
Voltage
V
Category Temperature
Range
°C
Combinations of Rated Resistance Range and
Temperature Coefficient of Resistance
Rated Dissipation
at 70°C
W
Rated Current
Range
A
Size
(Inch)
Metric
20m

33m
36m

47m
50m

200m
•Dimensions
•Part Number Description
Example
Resistance value is marking on surface.
Please refer to Specification (Reference) on kamaya website.
Please contact Kamaya Sales Dept. for marking of RCC16.
RCC10 & RCC06 is no marking.
2.00.15
3.10.2
0.10 0.4
0.2
0.5
0.25
2012 1.25 0.100805 0.4
0.2
0.6
0.2
0.5
0.25
＋ 0.05
− 0.10
0.25
RCC20
3216 1206
RCC32
0.05
0.03
5mg
9mg
0.6
0.100.6
RCC10 1.00.05
0.60.03
0.251005 0402
RCC06 0603 0201
0.6mg
0.16mg
0.35
RCC16 1.60.1 0.3
0.11608 0603 0.3
0.1
0.15
0.05
0.55
0.1
＋ 0.15
− 0.05
＋ 0.05
− 0.10
0.23 ＋ 0.03
− 0.10 ＋ 0.05
− 0.10
0.15 ＋ 0.05
− 0.10
0.8 2mg
0.100.5
0.5
0.15
1.6
0.3
WLHcd
All Resistance
All Resistance
R > 20m
20m
≤ R
R > 20m
20m
≤ R
All Resistance
Rated Resistance
Style Metric Inch
*Unit weight/pc.
*Values for reference
W
dd
H
L
cc
Unit : mm
Style
Product Type
Tolerance on Rated Resistance
* Packaging & Standard Qty. (Min.)
*Refer to Tape and Packaging information on page 22 and 23.
Rated Resistance
F
e.g.: R050=50m
R100=100m
±1%
J
±5%
RCC 20 R050 TPF
Bulk (Loose Package)
B
Paper Tape (2mm pitch)
TH
Paper Tape
TP
1,000pcs.
10,000pcs.
5,000pcs.
RCC10
All style
RCC16
RCC20
RCC32
Press-Pocket
Paper Tape (2mm pitch)
PA 15,000pcs. RCC06
Size
06 0603 0201
16 1608 0603
32 3216 1206
Code Metric Inch
10 1005 0402
20 2012 0805
•Precautions of use
Resistive element is on bottom surface.
Please note for inspection of parts existence & nonexistence, inversion mounting by
Inspection machine.
Resistance value will be changed by soldering condition.
Please design products in consideration of this change of resistance value.
1.
2.
NEW
NEW
Chip R esistors
Sensing
NEW
AntimonyFree
PbFree
AntimonyFree
HalogenFree
HalogenFree
•Ratings
RLP,MLP
•Dimensions
Resistance value will be changed by soldering condition.
Please design products in consideration of this change of resistance value.
•Precautions of use
W
dd
L
cc
H
Resistance value of RLP series are marked like below.
The resistance value of RLP63 & MLP63 are marked with 4 charactors on the overcoating.
The resistance value of RLP20 & RLP32 are marked with "2 numbers" & "_" on the overcoating.
Please contact KAMAYA for marking of RLP16.
Unit : mm
*Values for reference
New lineup, 1m to 5m,10m,15m.
Suitable for current sensing of battery pack.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Style
Product Type
Tolerance on Rated Resistance
* Packaging & Standard Qty. (Min.)
*Refer to Tape and Packaging information on page 22 and 23.
Rated Resistance
Size
F
e.g.: R001=1m
R010=10m
±1%
0603
0805
1206
2512
Code Metric Inch
RLP 63 R005 TEF
Paper Tape
TP 5,000pcs.
K
Temperature Coefficient of Resistance
–
K
15010-6/°C
10010-6/°C
N
70 10-6/°C
RLP
MLP
Embossed Tape
TE 4,000pcs.
RLP16
RLP20
RLP32
RLP63
MLP63
16
20
32
63
1608
2012
3216
6332
•Part Number Description
Example
A
BYY
X
•Rated Resistance •Recommended land Pattern
RLP16 1.6±0.1 0.8 ±0.1
3.2±0.15 1.6 ±0.15
6332 2512
1608 0603
RLP20 2.0±0.15 1.25±0.15
2012 0805
RLP63
MLP63
6.3±0.25 3.1 ±0.25
3.2 ±0.25
RLP32 3216 1206
WL
Rated Resistance
Hcd
Style Metric Inch *Unit weight/pc.
0.3 ±0.1
0.47±0.20
1.1 ±0.25
0.5 ±0.25
1.0 ±0.25
0.5 ±0.25
2.2 ±0.25
1.95±0.25
1.75±0.25
0.95±0.25
1.1 ±0.25
0.5 ±0.25
0.2 ±0.1
0.3 ±0.1
1.1 ±0.25
0.5 ±0.25
1.0 ±0.25
0.5 ±0.25
2.2 ±0.25
1.95±0.25
1.75±0.25
0.95±0.25
1.1 ±0.25
0.5 ±0.25
10mΩ
10mΩ
1mΩ
2mΩ
5mΩ
10mΩ
15mΩ
1mΩ
5mΩ
10mΩ
15mΩ
5mΩ
10mΩ
2mg
3mg
12mg
11mg
11mg
9mg
6mg
50mg
43mg
30mg
26mg
64mg
41mg
0.3 ±0.1
0.22±0.10
0.32±0.15
0.35±0.10
0.28±0.10
0.22±0.10
0.38±0.15
0.34±0.15
0.23±0.15
0.51±0.15
0.35±0.15
NEW
NEW
NEW
J
±5%
Resistance
MarkingStyle
RLP32
RLP63
MLP63
10mΩ
10mΩ
1mΩ
2mΩ
5mΩ
10mΩ
15mΩ
1mΩ
5mΩ
10mΩ
15mΩ
5mΩ
10mΩ
10
01
02
05
10
15
R001
R005
R010
R015
R005
R010
No Marking
RLP16
RLP20
Unit : mm
*Values for reference
RLP16
MLP63
1608 0603
RLP20 2012 0805
6332 2512
3.9
7.6
1.7
3.5
RLP32
RLP63
3216 1206
Style BAMetric Inch XY
Rated Resistance
10mΩ
10mΩ
1mΩ
2mΩ
5mΩ
10mΩ
15mΩ
1mΩ
5mΩ
10mΩ
15mΩ
5mΩ
10mΩ
1.0
0.8
1.0
2.1
1.4
2.0
2.4
4.0
2.2 0.8
2.7 1.35
2.1
0.6
0.95
1.45
0.9
1.25
2.8
2.6
1.8
0.9
Style
Combination of Rated Resistance Range and
Temperature Coefficient of Resistance
Rated Resistance
Range
Temperature Coefficient
of Resistance
10-6/°CCode
Rated Dissipation
at 70°C
W
Rated Current
Range
A
Tolerance on
Rated Resistance
Isolation
Voltage
V
Category Temperature
Range
°C
Size
(Inch)
Metric
Note1. Rated Current = (Rated Dissipation)/(Rated Resistance)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note3. Please contact Kamaya Sales Dept. for any other resistance values.
RLP16
RLP32
RLP63
MLP63
100
10mΩ
10mΩ
1mΩ
2mΩ, 5mΩ, 10mΩ, 15mΩ
1mΩ
5mΩ, 10mΩ, 15mΩ
5mΩ, 10mΩ
5.7
7.0
31.6
22.3, 14.1, 10, 8.1
44.7
14.1, 10, 8.1
20.0, 14.1
0.33
0.5
1
2
1
2
F(±1%)
J(±5%)
1608
(0603)
RLP20 2012
(0805)
3216
(1206)
6332
(2512)
55155
±100
±70
±100
±70
±150
±100
±100
±70
±150
±70
±100
±70
±100
±70
K
N
K
N
-
K
K
N
-
N
K
N
K
N
8Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Chip R esistors
Sensing
http://www.kamaya.co.jp
NEW
Antimony Free
Pb Free
Halogen Free
RAC
•Ratings
•Dimensions
High-density SMD packaging contributes higher productivity and reduces assembly costs.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
Walsin Technology Corporation OEM products are also available.
•Features
•Ratings
•Dimensions
Highly suitable for the purposes of pull-up and pull-down.
Easy to handle because of no specified direction for mounting due to the symmetrical position of common terminals.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Part Number Description
Example
•Part Number Description
Example
RAC168U
0.65
0.8
0.3 0.2
0.150.10
0.150.10
0.250.15
0.2 0.1 0.250.10
0.330.10
0.340.05
0.6 0.15
0.350.1
0.450.10
0.4 0.1
0.6 0.1
0.250.10
0.2 0.15 0.250.17
0.5
1.1mg
7mg
2.1mg
0.4 0.15
0.3 0.05
0.350.05
0.350.10
0.450.10
0.450.1
0.350.05
0.5 0.1
0.5 0.1
1.00.05
1.00.1
1.00.1
1.00.1
1.60.1
1.60.1
1.00.05
1.00.1
2.00.1
2.00.1
3.20.1
3.20.1
C
C
C
RAC102D
RAC104D
RAC164D
0.05
0.10
0.25
*Unit weight/pc.
Unit : mm
*Values for reference
*Pba*Q2Q1HWL
Style
Terminal Style
0.5 0.3 0.1 0.3 0.1
0.3 0.1 0.3 0.2
8.3mg 0.3 0.1
0.4 0.1
1.60.1 3.80.1
C
RAC168D
KAMAYA
WALSIN
KAMAYA
WALSIN
KAMAYA
WALSIN
Product
WALSIN
RAC 10
Style
2103 C B
JD
Product Type
10
W:1.0mm
16
W:1.6mm
No. of Elements
2
2-Elements
4
4-Elements
Circuits
D
Isolation
Terminal Style
Convex
Type
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
B
Paper Tape
TP
RAC164D
RAC168D
RAC102D
RAC104D
Paper Tape (2 mm pitch)
TH
*Refer to Tape and Packaging information
on pages 22 and 23.
All Styles
1,000pcs.
5,000pcs.
10,000pcs.
8
8-Elements
Rated Resistance
Size
E24 Series
e.g.:103=10k ohm
JP
Resistor
Jumper
Tolerance on Rated Resistance
5%J
None
Resistor
1%F
Jumper
R1=R2=...=Rn
Rn
Circuits
• Please contact KAMAYA for different resistance values.
Note. Please contact KAMAYA for the detail of marking on the over coating.
R1R2
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
RAC102D
RAC104D
RAC164D
RAC168D
0.125
0.063
0.25
0.25
0.25
1.0
25
25
200 50
J(5%)
F
(
1%)J(
5%)
J(5%)
50
55125
E24
101M
100
W/Element W/pc.
Rated Dissipation
at 70°C
Style
Rated Current
of Jumper
A
Limiting Element
Voltage
V
Temperature Coefficient
of Resistance
10
-6
/°C
Rated Resistance
Range
Tolerance on
Rated Resistance
Preferred Number
Series for
Resistors
Isolation
Voltage
V
Category Temperature
Range
°C
R1
R1=R2=...=R7=R8
R2R3R4
R5R6R7R8
Rated resistance is marked with 3-digit on the over coating.
Circuits
Q1Q2D
a
L
Wb
H
P
Unit : mm
*Values for reference
0.640.3 0.2 0.30.15
*Q2
0.53
0.320.100.50.1 0.320.101.60.13.20.2RAC168U
*Unit weight/pc.
*PbaQ1
7.6mg
HDWLStyle
Terminal Style
C
RAC 16
Style
8CTP103 JU
Product Type
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
B
Paper Tape
1,000pcs.
5,000pcs.TP
Tolerance on Rated Resistance
J5%
Rated Resistance
E24 Series
e.g. : 103=10k ohm
Circuits
U
No. of Elements
88-Elements
Terminal Style
With cornerC
Size
16 W:1.6mm
Convex Type
Common Electrode 2: Same Type
RAC168U
0.063 25
250
200
1018
201M
J(5%) E24 100
55

125
Style
Rated Dissipation
at 70°C
W
Limiting Element
Voltage
V
Temperature Coefficient
of Resistance
10-6/°C
Tolerance on
Rated Resistance
Rated Resistance
Range
Preferred Number
Series for
Resistors
Isolation
Voltage
V
Category Temperature
Range
°C
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors
when the resistance value is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
*Refer to Tape and Packaging information
on pages 22 and 23.
•Application Examples
• Making the parallel 8-Elements
resister for pull-up / pull-down
into one chip.
• Ideal for high density SMT
applications as direct mounting
on the bus line is possible.
Vcc
RAC104D
RAC164D
Terminal Style: C Terminal Style: C
H
L
P
Q1
Q2
a
W
b
RAC102D RAC168D
P
H
W
b
Q2
L
a
a
b
P
W
Q1
Terminal Style: C
L
P
H
With corner
C
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】9
Chip R esistors
Chip Network
http://www.kamaya.co.jp
Antimony Free
Halogen Free
Antimony Free
Halogen Free
FCR
•Ratings
例
•Part Number Description
•Ratings
•Part Number Description
Example
W
dd
L
cc
H
W
dd
H
L
cc
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
Note4. T.C.R.: ±100×10-6/°C (10 ohm1M ohm) is available on your request.
Note5. The indicated values of Ratings are in the case without trimming.
0.063
FCR1/8
0.125
FCR1/4
0.25
FCR1/2
0.5
FCR1
1.0
FCR1/16
FCR1/10
0.1
500200 L (15%)
(
0

30
%)
200
200
E24
500
100
55125
1608
(0603)
2012
(0805)
3216
(1206)
3225
(1210)
5025
(2010)
6332
(2512)
Style
Rated Dissipation
at 70°C
W
Tolerance on
Rated Resistance
Preferred Number
Series for
Resistors
Isolation
Voltage
V
Category Temperature
Range
°C
Combinations of Rated Resistance Range and
Temperature Coefficient of Resistance
Temperature Coefficient
of Resistance 10-6/°C
Size
(Inch)
Metric
19.1
104.7M
104.7M
Rated Resistance
Range
200
50
150
Limiting Element
Voltage
V
471 L
FCR 1/4
Product Type
Style
TE
Code
Rated Dissipation
Rated Dissipation & Size
1/10 0.1W 2012
3216
3225
5025
6332
1/8 0.125W
1/4 0.25W
1/2 0.5W
1 1.0W
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)B
Paper Tape
TP
Embossed Tape
All Styles
FCR1/16
FCR1/10
FCR1/8
1,000pcs.
5,000pcs.
4,000pcs.
FCR1/4
FCR1/2
FCR1
TE
*Refer to Tape and Packaging information on pages 22 and 23.
Rated Resistance
E24 Series
e.g. : 471=470 ohm
Tolerance on Rated Resistance
–
±15%L
%
0
-30
Metric
0805
1206
0.063W 16081/16 0603
1210
2010
2512
Inch
•Dimensions
•Dimensions
Trimmable device and replaceable with various resistors.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
RHC
Suitable for compact instrumentation, infrared rays, sensors, etc.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
RHC20 1.250.10 0.40.2 0.40.2
RHC16 0.30.1 0.30.11608
2012
WL
0.450.10
0.550.10
1.60.1
2.00.1
0603
0805
Hcd
0.15
0.05
0.8
5mg
2mg
*Unit weight/pc.
Style
Metric Inch
Unit : mm
*Values for reference
RHC 20
Style
75G0 MTP
Product Type
Size
20 2012
16 1608
Tolerance on Rated Resistance
M±20%
K±10%
J± 5%
N
H
±30%
±50%
0805
0603
Inch
Code
Metric
Rated Resistance * Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
B
Paper Tape
1,000pcs.
5,000pcs.
TP
*Refer to Tape and Packaging
information on pages 22 and 23.
e.g.: 100M=100M ohm
1G00=1G ohm
10G0=10G ohm
100G=100G ohm
FCR1 0.15 6.30.15 0.550.15 0.60.2 0.60.2
FCR1/2 0.15 5.00.15 0.550.15 0.60.2 0.60.2
FCR1/4 0.15 3.20.15 0.550.15 0.50.25 0.50.25
FCR1/8 0.15 3.20.15 0.550.10 0.50.25 0.50.25
FCR1/10 1.25 0.102.00.1 0.550.10 0.40.2 0.40.22012
3216
3225
5025
6332
WL
0805
1206
1210
2010
2512
Hcd
40mg
25mg
16mg
9mg
5mg
FCR1/16 1.60.1 0.450.10 0.30.1 0.30.11608 0603 2mg
1.6
2.5
2.5
3.2
0.15
0.10
0.8
Style
Metric Inch
*Unit weight/pc.
Unit : mm
*Values for reference
RHC20
RHC16
15 100
55155
02,000
2,000
4,000
100M
100M
100G
100M
100M
100M
270M
4G
150G
150G
1G
10G
(
5%)
(
10%)
(
20%)
(
30%)
(
50%)
(
5%)
(
10%)
(
20%)
(
30%)
(
50%)
J
K
M
N
H
J
K
M
N
H
1608
(0603)
2012
(0805)
Style
Rated
Voltage
V
Temperature Coefficient
of Resistance
10-6/°C
Tolerance on
Rated Resistance
Preferred Number
series for resistors
E12
Isolation
Voltage
V
Rated Resistance
Range
Category Temperature
Range
°C
Size
(Inch)
Metric
Antimony FreeHalogen Free
55125
10 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Chip R esistors
Trimmable & Sensing
http://www.kamaya.co.jp
Antimony Free
Halogen Free
Antimony Free
Halogen Free
LTC
•Dimensions
•Features
•Ratings
Suitable for use at DC and up to UHF band frequencies.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Part Number Description
Example
Note. The following information is available.
1. Test methods for Attenuation Factor and VSWR characteristics.
•Dimensions
•Features
•Ratings
Linearity of resistance change in wide temperature range.
Suitable for temperature compensation, temperature sensing and controling, and circuit protection applications.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Part Number Description
Example
W
dd
L
cc
H
Rated resistance and T.C.R. value are marked with 4-digit on the over coating.
e.g. 10E3...
Please contact KAMAYA Sales department for further information.
10 : 1,000×10-6/°C
E3 : 1.5k ohm
Unit : mm
*Values for reference
1.550.103.10.1 0.60.1 0.450.20LTC1/8
LTC1/10 2.00.15 0.60.1 0.4 0.2 2012
3216
0.2
0.1
Style
WLMetric
0805
1206
Inch Hc
5mg
9mg
d
*Unit weight/pc.
0.3
0.2
0.1
0.3
0.10
0.05
1.25
Unit : mm
*Values for reference
0.330.100.350.1 0.150.10 0.250.10
RAC101A
C
Style
QH
1.00.1
L
Terminal Style
ab
1.1mg
P
*Unit weight/pc.
0.650.10
W
0.10
0
1.0
B
30 J102
LTC 1/8
Product Type
Style
Rated Dissipation & Size
Code
1/10 0.1W 2012
32161/8 0.125W
Rated Dissipation
Metric
0805
1206
Inch
Temperature Coefficient of Resistance
Refer to Ratings Table on next page
e.g.: 30=3,000×10-6/°C
Rated Resistance
E24 Series
e.g.:102=1k ohm
Tolerance on Rated Resistance
J5%
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
B
Paper Tape
1,000pcs.
5,000pcs.TP
*Refer to Tape and Packaging
information on pages 22 and 23.
500 05
Temperature Coefficient of Resistance
10-6/°C
Code
LTC1/10
(0.1W)
LTC1/8
(0.125W)
±100×10-6/°C
Tolerance on
Rated Resistance
Preferred Number
Series for
Resistors
J(±5%)
Resistance Temperature
Coefficient Tolerance
100 ohm5.1k ohm 100 ohm10k ohm
800 08 ±150×10-6/°C
100 ohm5.1k ohm 100 ohm10k ohm
1,000 10 ±15%
100 ohm5.1k ohm 100 ohm10k ohm
1,500 15
100 ohm3.3k ohm 100 ohm4.7k ohm
2,000 20
±10%
100 ohm3.3k ohm 100 ohm4.7k ohm
2,400 24
100 ohm1.6k ohm 100 ohm2.2k ohm
2,800 28
100 ohm3.3k ohm 100 ohm3.6k ohm
3,000 30
100 ohm3.3k ohm 100 ohm3.6k ohm
3,300 33
100 ohm3.3k ohm 100 ohm3.6k ohm
3,600 36
51 ohm910 ohm 1.2k ohm
3,900 39
51 ohm560 ohm 51 ohm
51 ohm
910 ohm
4,200 42
33 ohm360 ohm 33 ohm470 ohm
4,500 45
33 ohm200 ohm 33 ohm180 ohm
Rated Resistance Range
(Rated Dissipation at 70°C)
E24
Isolation
Voltage
V
Category Temperature
Range
°C
100
40+125
Note1. Rated Voltage = (Rated Disspation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Listed above will be made by order. Please contact KAMAYA for further information.
RAC101A
43
12
Dot mark on Termination 1
Attenuation factor on Termination 2 to 3
Unbalanced Type
Circuits
Q
P
H
W
a
L
12
43
b
TH
RAC 10 1C1A
Product Type
Style
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
B
Paper Tape (2 mm pitch)
1,000pcs.
10,000pcs.
TH
Terminal Style
C With corner
Convex Type
Circuits
A
Unbalanced Type
Characteristic Impedance
1 50 ohm
Size
10 W:1.0mm
*Refer to Tape and Packaging information on pages 22 and 23.
1
2
3
4
5
6
7
8
9
A
1dB
2dB
3dB
4dB
5dB
6dB
7dB
8dB
9dB
10dB
Attenuation Factor
RAC101A
0.3
0.4
Style
Characteristic
Impedance
Frequency
Range
Voltage Standing
Wave Ratio
Rated Input Power
mW/package
Attenuation Factor
Tolerance on Attenuation
Factor
dB
Category Temperature
Range
°C
50 ohm 1.2max. DC f 3GHz 100 –40~+125
dB
symbol
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
A
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】11
Chip A ttenuators & C hip T hermistors
http://www.kamaya.co.jp
Antimony Free
Pb Free
Antimony Free
Halogen Free
Halogen Free
12 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
L
cc
W
dd
H
Unit : mm
FCC32
FHC32 1.6 0.15 0.50.25
FCC16
FHC16 0.30.15
0.5 0.25
0.3 0.1 1608
3216
Style WL
0.450.10
0.650.10
0.6 0.1
1.60.1
3.20.2
Metric
0603
1005 0402
1206
Inch H c d *Unit weight/pc.
2mg
0.20.1 0.250.10 1.00.05 0.8mg
1.250.10
0.5 0.05
FCC20
FHC20 0.40.2 0.4 0.2 2012 0.6 0.12.00.10805 6mg
10mg
11mg
0.15
0.05
0.8
FCC10
FHC10 0.4 0.05
FCC10 1005 0402 0.5 0.05 0.20.1 0.250.10
0.35 Max.
1.00.05 0.6mg
■Ratings/Option Code ： AD, AB, AA
■Ratings/Option Code ： LB
Style WLMetric Inch H c d *Unit weight/pc.
*Values for reference
•
Ratings/Option Code : AD (Fast-Acting type)
•Dimensions
Style
Size
InchMetric Mark
Internal Resistance
m ohm max.
Interrupting Rating
Time/Current Characteristics
Working Temperature Range
°C
Code A
Rated Current
151
201
251
321
401
501
631
801
102
132
162
202
252
322
151
201
251
321
401
501
631
801
102
132
162
202
252
322
402
401
501
631
801
102
132
162
202
252
322
402
502
201
251
321
401
501
631
801
102
132
152
162
202
252
322
402
502
O
Z
C
D
E
F
I
K
L
M
N
S
T
U
OD
ZD
CD
DD
ED
FD
ID
KD
LD
MD
ND
SD
TD
UD
XD
401
501
631
801
102
132
162
202
252
UD
XD
YD
201
251
321
401
501
631
801
102
132
152
162
202
252
UD
XD
YD
0.15
0.2
0.25
0.315
0.4
0.5
0.63
0.8
1.0
1.25
1.6
2.0
2.5
3.15
0.15
0.2
0.25
0.315
0.4
0.5
0.63
0.8
1.0
1.25
1.6
2.0
2.5
3.15
4.0
0.4
0.5
0.63
0.8
1.0
1.25
1.6
2.0
2.5
3.15
4.0
5.0
0.2
0.25
0.315
0.4
0.5
0.63
0.8
1.0
1.25
1.5
1.6
2.0
2.5
3.15
4.0
5.0
2,700
1,000
750
620
340
290
210
150
120
90
55
40
36
26
4,000
1,800
1,000
750
330
280
200
130
110
85
70
55
45
26
19
330
270
190
130
100
80
65
55
40
26
19
14
1,800
1,000
750
350
295
200
140
110
85
78
75
65
45
26
19
14
FCC10
1005 0402
1608 0603
2012 0805
3216 1206
FHC10
FCC16
FHC16
FCC20
FCC32
FHC20
FHC32
24Vd.c. 35A
36Vd.c. 35A
32Vd.c. 35A
50Vd.c. 50A
64Vd.c. 50A
32Vd.c. 50A
30Vd.c. 35A
24Vd.c. 35A
50Vd.c. 35A
32Vd.c. 35A
32Vd.c. 50A
24Vd.c. 50A
−55〜＋125
Rated Current250%
Opening Time 5s max.
FCC,FHC
Certified UL, c-UL. File No. : E176847
Fast-Atcting Type. Suitable for over-current protection of the circuit of miniature portable equipment.
Please contact Kamaya Sales Dept, if you need to confirm Inrush current endurance, Anti-pulce performance etc.
We can provide Application Guide for FCC,FHC selection.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Current value is marked on the cover coating.
Please refer to Ratings table as below.
Chip F uses
Circuit Protection
Antimony Free
Pb Free
Halogen Free
•Part Number Description
Example
FCC 20
Product Type
Style
202 AD TP
Size
10 1005
Code Metric
20
060316 1608
0402
3-Digit
Inch
08052012
120632 3216
Rated Current
e.g. : 501=0.5A
132=1.25A
202=2.0A
Option Code
Code Clearing Time
AB
LB
AA
Within 5s under 200%
of Rated Current
Within 120s under
200% of Rated Current
AD
Within 5s under 250%
of Rated Current
FCC
FHC
B
Paper Tape
1,000pcs.
5,000pcs.
All Styles
FCC16 FHC16
FCC20 FHC20
FCC32 FHC32
TP
10,000pcs. FCC10
FHC10
PA
* Packaging & Standard Qty. (Min.)
*Refer to Tape and Packaging information on pages 22 and 23.
Bulk (Loose Package)
Press-Pocket
Paper Tape (2mm pitch)
TH
10,000pcs.
FCC10(LB)
Paper Tape (2mm pitch)
FCC, FHC
55125
501
631
801
102
132
162
202
252
501
631
801
102
132
162
202
252
0.5
0.63
0.8
1.0
1.25
1.6
2.0
2.5
270
190
130
100
80
65
55
40
2012 0805 FCC20 50Vd.c. 50A Rated Current200%
Opening Time 120s max.
•Ratings/Option Code : AB (Fast-Acting type)
Style
Size
Code
InchMetric A
Rated Current Mark
Internal Resistance
m ohm max.
Interrupting Rating Time/Current Characteristics Working Temperature Range
°C
•Recommended Derating for Rated Current
Nominal Derating
Option Code AD:Nominal Derating 80% of Rated Current
Option Code AB,LB:Nominal Derating 70% of Rated Current
Temperature Derating
Please refer to the following graph regarding the current derating value for
ambient temperature.
Ex.) If FCC16 102AB (Rated Current:1.0A) is used under ambient temperature 70°C,
Kamaya recommends, less than the current value derated as below,
Rated Current：1.0A(Nominal Derating : 70%Temperature Derating : 100%) =0.7A
100
0
−55 125
70
Ambient Temperature(°C)
Temperature Derating
Percentage of the rated current(%)
Style
Size
Code
InchMetric A
Rated Current Mark
Internal Resistance
m ohm max.
Interrupting Rating Time/Current Characteristics
Working
Temperature Range
°C
201
251
321
401
501
631
751
801
102
132
152
162
202
252
201
251
321
401
501
631
751
801
102
132
152
162
202
252
501
631
801
102
132
162
202
252
Z
C
D
E
F
I
A
K
L
M
H
N
S
T
ZB
CB
DB
EB
FB
IB
AB
KB
LB
MB
HB
NB
SB
TB
FB
IB
KB
LB
MB
NB
SB
TB
0.2
0.25
0.315
0.4
0.5
0.63
0.75
0.8
1.0
1.25
1.5
1.6
2.0
2.5
0.2
0.25
0.315
0.4
0.5
0.63
0.75
0.8
1.0
1.25
1.5
1.6
2.0
2.5
0.5
0.63
0.8
1.0
1.25
1.6
2.0
2.5
2,400
1,000
750
620
340
290
220
210
150
120
100
90
55
40
3,200
1,800
1,000
750
330
280
210
200
130
110
95
85
70
40
330
270
190
130
100
80
65
40
1005 0402
1608 0603
2012 0805
FCC10
FHC10
FCC16
FHC16
FCC20
FHC20
36Vd.c. 35A
32Vd.c. 35A
50Vd.c. 50A
32Vd.c. 50A
30Vd.c. 35A
24Vd.c. 35A
−55〜＋125
Rated Current200%
Opening Time 5s max.
•Rating/Option Code : AA (Fast-Acting type)
55125
321 30315 750
1005 0402 FCC10
30Vd.c. 35A Rated Current200%
Opening Time 5s max.
Style
Size
Code
InchMetric A
Rated Current Mark
Internal Resistance
m ohm max.
Interrupting Rating Time/Current Characteristics Working Temperature Range
°C
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】13
http://www.kamaya.co.jp
Chip F uses
Circuit Protection
Current value is marked on the cover coating.
Please refer to Ratings table as below.
•Dimensions
W
dd
H
L
cc
FCCR10
Suitable for over-current protection of the circuit of miniature portable equipment.
Low internal resistance compared with FCC10AB series for low power consumption and voltage dropping.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
FCCR10 0.2±0.1 0.25±0.10
1005 0.4±0.051.0±0.05 0.5±0.05
0402 0.8mg
Style WLMetric Inch Hcd
*Unit weight/pc.
Unit : mm
*Values for reference
FCCR 10
Style
151 AB PA
Code Clearing Time
AB
Rated Current
Option Code
e.g. :151=0.15A
321=0.315A
501=0.5A
Within 5s under 200% of Rated Current
3digit
Product Type
FCCR Bulk (Loose Package)
* Packing & Standard Qty. (Min.)
B
Press-Pocket
Paper Tape(2mm pitch)
1,000pcs.
10,000pcs.PA
*Refer to Tape and Packaging information on pages 22 and 23.
Code Metric Inch
Size
10 1005 0402
•Part Number Description
Example
•Ratings/Option Code : AB (Fast-Acting type)
151
201
251
321
401
501
0.15
0.2
0.25
0.315
0.4
0.5
1850
1250
880
600
400
300
1005 0402 FCCR10 24Vd.c. 35A 55125
Style
Size
InchMetric Time / Current Characteristics
Code
Rated Current
A
Interrupting Rating
Mark
Working Temperature Range
°C
Internal Resistance
m ohm max.
Rated Current 200%
Opening time 5s Max.
∩
Z
C
D
E
F
•Recommended Derating for Rated Current
Nominal Derating
Nominal Derating 75% of Rated Current
Temperature Derating
Please refer to the following graph regarding the current derating value for
ambient temperature.
Ex.) If FCCR10 501AB (Rated Current:0.5A) is used under ambient temperature 70°C,
Kamaya recommends, less than the current value derated as below,
Rated Current : 0.5A(Nominal Derating : 75%Temperature Derating : 100%) = 0.375A
Percentage of the rated current(%)
100
0−55 125
70
Ambient Temperature(°C)
Temperature Derating
Certified UL, c-UL. File No. : E176847
14 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
NEW
Antimony Free
Pb Free
Halogen Free
Chip F uses
Circuit Protection
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】15
http://www.kamaya.co.jp
Code Clearing Time
AB
AH
Rated Current
Option Code
e.g. :102=1.0A
132=1.25A
252=2.5A
•Part Number Description
Example
Rated Current
200% 5s max.
3digit
FMC 16
Product Type
Style
252 AB TP
FMC Bulk (Loose Package)
* Packing & Standard Qty. (Min.)
B
Paper Tape
1,000pcs.
5,000pcs.TP
*Refer to Tape and Packaging information on pages 22 and 23.
Code Metric Inch
Size
16 1608 0603
FMC16
Option code : AB / Low internal resistance compared with FCC/FHC16 AB series for low power consumption and voltage dropping.
Option code : AH / High anti pulse perfomance.
Please contact Kamaya Sales Dept, if you need to confirm Inrush current endurance, Anti-pulce performance etc.
We can provide Application Guide for FMC16 selection.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Certified UL, c-UL. File No. : E176847
•Dimensions
•Recommended Derating for Rated Current
W
dd
FMC16 0.3±0.15 0.3±0.11608 0.45±0.101.6±0.10603 2mg
Current value is marked on the cover coating.
Please refer to Ratings table as below.
H
＋0.15
−0.05
0.8
L
cc
F
Unit : mm
*Values for reference
Style WLMetric Inch Hcd
*Unit weight/pc.
•Ratings/Option Code : AB (Fast-Acting type)
501
751
102
132
152
202
252
302
402
502
F
A
L
M
H
S
T
R
X
Y
0.5
0.75
1.0
1.25
1.5
2.0
2.5
3.0
4.0
5.0
260
140
110
80
65
45
32
26
18
14
1608 0603 FMC16 32Vd.c. 35A 55125
Nominal Derating
Nominal Derating 75% of Rated Current
Temperature Derating
Please refer to the following graph regarding the current derating value for ambient temperature.
Ex.) If FMC16 102AB (Rated Current 1.0A) is used under ambient temperature 70°C,
Kamaya recommends, less than the current value derated as below,
Rated Current : 1.0A(Nominal Derating : 75%Temperature Derating : 80%) = 0.6A
0
10
20
30
40
50
60
70
80
90
100
110
120
130
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110 120130
Ambient Temperature(°C)
Percentage of the rated current(%)
Style
Size
InchMetric Electrical Characteristics
Code
Rated Current
A
Interrupting Rating
Mark
Working Temperature Range
°C
Internal Resistance
m ohm max.
100% 4h Min.
200% 5s Max.
300% 0.2s Max.
Rated Current Opening time
•Ratings/Option Code : AH (Fast-Acting type)
501
631
751
801
102
132
152
162
202
252
302
322
402
502
HF
HI
HA
HK
HL
HM
HH
HN
HS
HT
HR
HU
HX
HY
0.5
0.63
0.75
0.8
1.0
1.25
1.5
1.6
2.0
2.5
3.0
3.15
4.0
5.0
400
300
210
180
115
90
70
60
50
37
28
26
18
14
1608 0603 FMC16 32Vd.c. 35A 55125
Style
Size
InchMetric Electrical Characteristics
Code
Rated Current
A
Interrupting Rating
Mark
Working Temperature Range
°C
Internal Resistance
m ohm max.
100% 4h Min.
200% 5s Max.
300% 0.2s Max.
Rated Current Opening time
Option Code : AB / Low Ohm & Fast Acting
Option Code : AH / In- rush Withstand
Chip F uses
Circuit Protection
Antimony Free
Pb Free
Halogen Free
•Part Number Description
Example
FMC10
Features Suitable for over-current protection of the circuit of miniature portable equipment.
Low internal resistance compared with FCC/FHC 10AB Series.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Dimensions
•Recommended Derating for Rated Current
FMC10 0.2±0.1 0.25±0.101005 0.38±0.051.0±0.050402 0.6mg
Current value is marked on the cover coating.
Please refer to Ratings table as below.
0.5±0.05
Unit : mm
*Values for reference
Style WLMetric Inch Hcd
*Unit weight/pc.
•Ratings/Option Code : AB (Fast-Acting type)
501
751
102
132
152
202
252
302
F
A
L
M
H
S
T
R
0.5
0.75
1.0
1.25
1.5
2.0
2.5
3.0
240
140
95
73
60
41
32
25
1005 0402 FMC10 24Vd.c. 35A 55125
Nominal Derating
Nominal Derating m 75% of Rated Current
Temperature Derating
Please refer to the following graph regarding the current derating value for ambient
temperature.
Ex.) If FMC10 102AB (Rated Current 1.0A) is used under ambient temperature 70C,
Kamaya recommends, less than the current value derated as below,
Rated Current : 1.0Au (Nominal Derating : 75%uTemperature Derating : 80%) = 0.6A
Style
Size
InchMetric Electrical Characteristics
Code
Rated Current
A
Interrupting Rating
Mark
Working Temperature Range
°C
Internal Resistance
m ohm max.
100% 4h Min.
200% 5s Max.
300% 0.2s Max.
Rated Current Opening time
Option Code : AB / Low Ohm & Fast Acting
Certified UL, c-UL. File No. : E176847
W
dd
H
L
cc
F
0
10
20
30
40
50
60
70
80
90
100
110
120
130
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110 120130
Ambient Temperature(°C)
Percentage of the rated current(%)
10 1005
Size
FMC 10
Product Type
Style
501 AB TH
FMC Bulk (Loose Package)
Paper Tape
1,000pcs.
10,000pcs.
*Refer to Tape and Packaging information on pages 22 and 23.
* Packing & Standard Qty. (Min.)
B
TH
Code Clearing Time
AB
Option Code
Rated Current
200% 5s max.
Rated Current
e.g. :501=0.5A
132=1.25A
302=3.0A
3digit
16 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
Antimony Free
Pb Free
Halogen Free
NEW
Chip F uses
Circuit Protection
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】17
http://www.kamaya.co.jp
L
cc
W
dd
H
S40
Current value is marked on the cover coating.
Please refer to Ratings table as below.
Certified UL, c-UL. File No. : E176847
Slow Blow ensure high anti pulse performance.
Please contact Kamaya Sales Dept, if you need to confirm Inrush current endurance, Anti-pulce performance etc.
We can provide Application Guide for SBF32 selection.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Dimensions
Unit : mm
*Values for reference
SBF32 0.50.25 0.50.253216
Style WL
0.650.103.20.2
Metric
1206
Inch Hcd
*Unit weight/pc.
10mg1.60.15
•
Opton Code:AS(Slow Blow type)
102
132
152
202
252
302
402
502
602
702
802
S10
S13
S15
S20
S25
S30
S40
S50
S60
S70
S80
1.0
1.25
1.5
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
130
94
68
40
30
24
15
12
10
7
6
3216 1206 SBF32
32Vd.c. 50A
63Vd.c. 50A
−55〜＋125
×100％  4h
×200％  1s 120s
×300％  0.02s 3.0s
×800％  
0.0015s
0.05s
Rated Current
Opening time
Min. Max.
Style
Size
InchMetric Electrical Characteristics
Code
Rated Current
A
Interrupting Rating
Mark
Working Temperature Range
°C
Internal Resistance
m ohm typ.
•Recommended Derating for Rated Current
Nominal Derating
Nominal Derating 75% of Rated Current
Temperature Derating
Please refer to the following graph regarding the current derating value for ambient temperature.
Ex.) If SBF32 102AS (Rated Current 1.0A) is used under ambient temperature 70°C,
Kamaya recommends, less than the current value derated as below.
Rated Current : 1.0A(Nominal Derating : 75%Temperature Derating : 80%) = 0.6A
•Part Number Description
0
10
20
30
40
50
60
70
80
90
100
110
120
130
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110 120130
Ambient Temperature(°C)
Percentage of the rated current(%)
Example
Code Clearing Time
AS
Rated Current
Option Code
e.g. :252=2.5A
402=4.0A
802=8.0A
Rated Current200% : 1s min〜120s.
max.
3digit
SBF 32
Product Type
Style
402 AS TP
SBF Bulk (Loose Package)
Packing & Standard Qty. (Min.)
B
Paper Tape
1,000pcs.
5,000pcs.TP
Code Metric Inch
Size
32 3216 1206
*Refer to Tape and Packaging information on pages 22 and 23.
SBF32 Slow Blow
Antimony Free
Pb Free
Halogen Free
Chip F uses
Circuit Protection
18 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
We would like to support the customer to find the appropriate Kamaya chip fuse it the following condittions of usage are provided.
Please contact kamaya Sales Dept for details.
・The item you would like to check.
・Circuit Voltage:Max voltage value of circuit mounting fuses.
・Steady-State Current:Current value flown fuses on normal condition.
・Ambient Temperature:Temperature around fuses.
・Wave form (In-rush Current)：It rapidly flows on circuit when power supply is turned on.
Support of Chip Fuse Selection
We can provide Application Guide for Fuses selection.
Messrs ***
Series FCCR 15 V d.c.
Size 1005 (mm) 20 A
OP Code AB Nominal 0.2 A Max.
Ambient 70 deg.C Max
Abnormal 1 A
Size Amp. Fusing
1005 0.5 A 200%, 5s 24 Vd.c. 35A
Condition Spec
Judgment
Voltage 15Vd.c. 24Vd.c. OK
Current 20A 35A OK
75%
100%
#1 0.2666667 A Min.
#2 0.5 A Max.
FCCR10501AB Standing Pulse 100k times
Nominal Derating
Temperature Derating
Application
P/N Interrupting Note.
Verification of Chip Fuse Application
■
Item for examination
■
Item for recommend
■
Confirmation for Interrupting
■
Confirmation for Derating
■
Basis of selection
Operating condition
**/**/20**
Kamaya Electric Co., Ltd.
Hokkaido Research Center
No.HR2TGF05******
Percentage of the rated current(%)
100
0
−55 125
70
Ambient Temperature(°C)
Temperature Derating
Im
0t1t2t3
1
#1 0 - 0.00002 s
Im
t1 5us
3A
t2 10 us
t3 20 us
90A^2 * us
Amount
Size Current Fusing
#1
FCCR
10 501 AB 1005 0.5A 200%, 5s
#2
#3
#4
#5
Recommended Item
FCCR10501AB
Standing Pulse 100k times
Joule Integral
Items Note
Num of wave
Trapezoidal waveform
Joule Integral
■Confirmations for Rush
■Confirmation of Rush
Time t (s)
Joule Integral I2t (A^2s)
0.000001
0.00001
0.0001
0.001
0.01
0.000001 0.00001 0.0001 0.001 0.01
FCCR10501AB
Your Waveform
Chip F uses
Circuit Protection
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】19
http://www.kamaya.co.jp
Chip F usible Resistors
Circuit Protection
Antimony Free
Halogen Free
•Part Number Description
FRC
Rated resistance value is marked with 3-digit on the over coating
L
cc
W
dd
H
Suitable for battery circuit and power supply circuit.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Dimensions
•Ratings
Example
•Example of Typical Fusing Characteristics
FRC32 1.6 0.15
1.250.10
0.50.25
FRC20 0.40.2 0.40.2
0.50.25
2012
3216
WL
0.6 0.1
0.6 0.1
2.00.1
3.20.2
0805
1206
Hcd
6mg
0.8FRC16 0.30.1 0.30.1 1608 0.450.101.60.10603 2.2mg
10mg
0.15
0.05
Unit : mm
*Values for reference
Style
Metric Inch
*Unit weight/pc.
Bulk (Loose Package)
* Packing & Standard Qty. (Min.)
B
Paper Tape
1,000pcs.
5,000pcs.
TP
Tolerance on Rated Resistance
J5%
Rated Dissipation
Rated Resistance
2A 0.1W
1J 0.063W
2B
Size
20
16
32 0.125W
E24series
ex.:100=10
Fusing Characteristics
Cstandard
FRC 20
Product Type
C 2A 100 J
Style
TP
Code Metric Inch
Size
16 1608
32 3216
20 2012
0603
1206
0805
FRC20
FRC32
0.1
2.5W
2.0W
FRC16
0.063
3.951
1.89W
55125
50V30s max.
151
151
1,000
500
J(5%) E24
0.125
1608
(0603)
2012
(0805)
3216
(1206)
Size
(Inch)
Metric
Style
Rated Dissipation
W
Rated Resistance
Range
Fusing Characteristic
Applied Power Fusing Time
Category Temperature
Range
°C
Maximum
open-circuit
voltage
Tolerance on
Rated Resistance
Temperature Coefficient
of Resistance
10-6/°C
Preferred Number
Series for
Resistors
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Contact us for further information on other style, resistance and pre-arcing time-current characteristic than those mentioned above.
Note3. Contact us for information when inrush and surge voltage are supposed to be applied.
Note4. Maximum open circuit voltage is the value of voltage applicable to both ends of resistors,when a resister is open condition in a circuit.
This voltage shall be corresponding to 1,000 times the rated dissipation or maximum open circuit which is the less severe.
*Refer to Tape and Packaging information on pages 22 and 23.
56100
FRC20 FRC32FRC16
1000
100
0.1
0.01
0.001
0.0001
10
1
012345
100
10
0.01
0.001
0.0001
1
0.1
012345
1000
100
0.1
0.01
0.001
0.0001
10
1
012345
Rated Resistance : 10 ohm Rated Resistance : 1 ohm Rated Resistance : 51 ohm
Power (W)
Fusing Time (s)
Power (W)
Fusing Time (s)
Power (W)
Fusing Time (s)
http://www.kamaya.co.jp
Antimony Free
Pb Free
Halogen Free
ESD Suppressors
Circuit Protection
20 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Circult
W
dd
H
L
cc
SPC10
•Dimensions
Low capacitance 0402inch: 0.1pF Max.
Suitable for ESD protection of High Speed data lines.
High ESD Withstand, IEC61000-4-2 Lv4 8kV Contact Discharge
［Major application］
•PC, PC related equipment and peripherals
•Mobile Phone, PDA, Small portable devices
•Digital Video Camera, Digital Still Camera
•LCD TV, PDP TV, STB
•Game equipment etc.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Unit : mm
*Values for reference
Style WLMetric Inch Hcd
*Unit weight/pc.
SPC10 0.2±0.1 0.25±0.10
1005 0.35±0.051.0±0.05
0402 0.6mg
0.5±0.05
•Part Number Description
Example
Product Type
SPC
Code Metric Inch
Size
10 1005 0402
Peak Voltage
SPC 10
Style
501
Code Option Code
01
Option Code
Capacitance 0.1pF max.
A01 TH
Bulk (Loose Package)
* Packing & Standard Qty. (Min.)
B
Paper Tape (2mm pitch)
1,000pcs.
10,000pcs.TH
*Refer to Tape and Packaging information on pages 22 and 23.
Code
501
Peak Voltage
500V
Code
Rated Voltage
A
Rated Voltage
30V max.
•Ratings
Part Number CapacitanceNote.1
pF
ESD pulse withstand
Pulses
Clamp VoltageNote.3
V
Rated
votage
V
Leakage
current
μA
SPC10 0.1 Max. 500 Max.501 100 Max. 30 Max. 1 Max.100 Min. 55125
ESD Characteristics
Size
1005
(0402)
(Inch)
Metric
Category Temperature
Range
°C
Note.4 Note.5 Note.6
VCode
Peak Voltage
Note.2
Note1. Capacitance : Measured at 25℃, 1MHz, 1V rms.
Note2. Peak voltage : Measured at IEC61000-4-2 8kV Contact Discharge.
Note3. Clamp voltage : Measured at IEC61000-4-2 8kV Contact Discharge, at 30ns.
Note4. Rated Voltage : The value of voltage that is applicable to each terminal of ESD suppressor without operation of suppressor.
Note5. Leakage Current : The value of current that ESD suppressor is impressed at rated voltage.
Note6. Category Temperature Range : Working Temperature Range of ESD suppressor.
Circult
W
dd
H
L
cc
HSPC16
•Dimensions
High ESD protection performance(15kV) for automotive (Tight ESD spec requirement)
IEC61000-4-2 Air Discharge:
±
15kV
［Major application］
Car audio, Car Navigation System etc.
Video Camera, DSC, Desk top-PC. Note PC etc.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Unit : mm
*Values for reference
Style WLMetric Inch Hcd
*Unit weight/pc.
HSPC16 0.3±0.1 0.3±0.1
1608 0.5±0.101.6±0.1
0603 2mg
0.8 ＋0.15
−0.05
•Part Number Description
Example
Product Type
HSPC
Code Metric Inch
Size
16 1608 0603
Peak Voltage
HSPC 16
Style
701
Code Option Code
02
Option Code
Capacitance 0.2pF max.
B02 TP
Bulk (Loose Package)
* Packing & Standard Qty. (Min.)
B
Paper Tape
1,000pcs.
5,000pcs.TP
*Refer to Tape and Packaging information on pages 22 and 23.
Code
701
Peak Voltage
700V
Code
Rated Voltage
B
Rated Voltage
20V max.
•Ratings
Style CapacitanceNote.1
pF
ESD pulse withstand
Pulses
Clamp VoltageNote.3
V
Rated
votage
V
Leakage
current
μA
HSPC16 0.2 Max. 700 Max.701 100 Max. 20 Max. 1 Max.100 Min. 55125
ESD Characteristics
Size
1608
(0603)
(Inch)
Metric
Category Temperature
Range
°C
Note.4 Note.5 Note.6
VCode
Peak Voltage
Note.2
Note1. Capacitance : Measured at 25℃, 1MHz, 1V rms.
Note2. Peak voltage : Measured at IEC61000-4-2 15kV Air Discharge.
Note3. Clamp voltage : Measured at IEC61000-4-2 15kV Air Discharge, at 30ns.
Note4. Rated Voltage : The value of voltage that is applicable to each terminal of ESD suppressor without operation of suppressor.
Note5. Leakage Current : The value of current that ESD suppressor is impressed at rated voltage.
Note6. Category Temperature Range : Working Temperature Range of ESD suppressor.
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】21
http://www.kamaya.co.jp
NEW
ESD Suppressors
Circuit Protection
Antimony Free
Pb Free
Halogen Free
22 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
TE(12 mm width)
Code
180 0
-1.5 60 +1
0
13
+1.0
0
AB
130.2
CD
13.01.0
17.01.0
E
—
G
210.8
H
PA TH (Cavity pitch : 2mm)(
Cavity pitch : 4mm)
TP TE
t
t1
t
C
1.5
+0.1
-0
2.0±0.05
t1
A
W
E
1.75±0.1
B
C
1.5
+0.1
-0
t
0.3max.
2.0±0.05
A
W
E
1.75±0.1
B
t
t2
t1
PA,TH,TP,TE
(8 mm width)
Shoot molding
Vacuum molding
11.41.0 20.5
9
+1.0
0
Packaging for Surface Mount Devices
•Reel Dimensions
G
D
E
A
B
C
H
Label B
Label A
Unit : mm
Plastic Reel
(EIAJ ET-7200B)
*Dimension A : Please contact KAMAYA for plastic reels of 250mm and 330mm.
*Please contact Kamaya sales department for 1mm pitch cavity taping.
•Tape Dimensions (Unit : mm)
Pulling direction
Pulling direction
0.370.05
1.150.15
1.150.15
1.650.15
2.00.15
2.850.20
3.10.2
3.60.2
1.20.1
1.90.15
0603 0201
1005 0402
TH
TH
TP
TP
TE
RAC104D
1608 0603
2012 0805
1206
3225
3216
1210
5025 2010
6332 2512
1.15 +0.05
–0.10
0.670.05
1.90.2
1.90.2
2.50.2
3.60.2
3.50.2
5.50.2
6.90.2
2.20.1
RAC168D
3.60.2
0.420.03
0.60.1
0.60.1
0.80.1
0.80.1
–
–
–
0.40.1
0.60.1
0.270.02
–
–
–
–
–
–
–
–
–
–
0.450.05
0.60.05 0.50.05 0.7 max.
0.8 max.
0.8 max.
1.0 max.
1.00.2
1.10.15
0.5 max.
0.55 max.
0.8 max.
0.650.10
PA
1.150.10 4.00.05
4.00.05
4.00.1
4.00.1
8.00.2
8.00.3
120.3
8.00.2
3.50.05
5.50.05
3.50.05
1.15 +0.05
–0.10 0.4 +0.05
–0.10
Metric
Inch Style Code A B C W E t1t2t
RAC164D, RAC168U
Chip Networks
Chip Attenuators
RMC1/20, RGC1/20, RCC06, RNC06
RMC1/16, RGC1/16, FCR1/16, RVC16
RLC16, RHC16, RCC16, RLP16
FCC16, FHC16, FMC16, FRC16, HSPC16
RMC1/10, RGC1/10, FCR1/10, RNC20
RVC20, RPC20, RLC20, RHC20, LTC1/10
FCC20, FHC20, FRC20, RCC20
RLP20
RMC1/16
RAC101A
RMC1/4, FCR1/4, RPC35, RLC35
RMC1/2, FCR1/2, RVC50, RPC50, RZC50
RLC50, RLS50
RMC1, FCR1, RVC63, RPC63, RZC63
RLC63, RLS63, RLP63, MLP63
FCC10, FHC10, FCCR10
0.240.03
0402 01005
0.450.03 0.310.03 0.150.02 0.360.03
RMC1/32, RGC1/32
8.00.3
0.65 +0.05
–0.10 0.40.05
–
0.5 max.
1.15 +0.05
–0.10
RMC1/16S, RGC1/16S, RLC10, RCC10,
FCC10(LB), FMC10, SPC10
RMC1/8, RGC1/8, FCR1/8, RNC32, RVC32
RPC32, RLC32, LTC1/8, FCC32, FHC32
SBF32, FRC32, RCC32
RLP32
0.60.1
0.60.1
1.90.15 4.10.15
–
RAC102D
Packaging for SMD
PACKAGING FOR SURFACE MOUNT DEVICES
•Bulk Case (Code : BA) (Unit : mm)
110
12
Shutter
Slider
36
•Standard Packaging Quantities
25,000
Bulk case (pcs./case)
Size
Metric
1608
10,000
2012
5,000
3216
Inch
0603
0805
1206
•Standard Packaging Quantities (Minimum Units)
※Please contact Kamaya Sales department about bulk package of RLP16, RLP20, RLP32, RLP63, MLP63 .
RMC1/16, RGC1/16, FCR1/16
RVC16, RLC16, RHC16, RCC16, RLP16
FCC16, FHC16, FMC16, FRC16, HSPC16
RMC1/8, RGC1/8, FCR1/8
RNC32, RVC32, RPC32, RLC32,
LTC1/8, FRC32, RCC32
RMC1/10, RGC1/10, FCR1/10, RLP20
RNC20, RVC20, RPC20, RLC20, RHC20
LTC1/10, FCC20, FHC20, FRC20, RCC20
RMC1/16
RAC102D, RAC101A
RAC104D
RAC164D, RAC168U
RAC168D
RMC1/4, FCR1/4, RPC35, RLC35
RLP32, FCC32, FHC32, SBF32
RMC1/2, FCR1/2, RVC50, RPC50
RZC50, RLC50, RLS50
RMC1, FCR1, RVC63, RPC63, RZC63
RLC63, RLS63
RLP63, MLP63
10,000
15,000
20,000
10,000
5,000
5,000
4,000
0603 0201
1005 0402
PA
TH
TH
TP
TP
TE
1608 0603
2012 0805
3216 1206
3225 1210
5025 2010
6332 2512
50
8.8
7.8
0402 01005
6.0
8.3
7.2
8.4
0.027 1,000※
5,000
8.8
10.0
7.7
8.0
10.4
12.0
6.0
6.3
7.7
8.6
40
50
RMC1/20, RGC1/20, RCC06, RNC06
RMC1/16S, RGC1/16S, RLC10
RCC10, FMC10, SPC10
FCC10, FHC10, FCCR10
RMC1/32, RGC1/32
Metric
Inch Style Code M. P. Q.
(pcs./reel)
Reel Q' ty
(pcs.)
Gross Weight
(kg)
Outer Carton
Tape & Reel Bulk
Measurement
(m3)
Q' ty
(pcs.)
Chip Networks
Chip Attenuators
Packaging for SMD
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】23
http://www.kamaya.co.jp
24 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
RC1/2U
RC
UL recognized component (UL1676) (File No.E151897) USC
UL recognized component(UL1676) (File No.E151897). Reduce UL or CSA approval and maintenance cost.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Dimensions
•Ratings
•Part Number Description
Example
Improved pulse endurance characteristics compared to carbon-film devices.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
Temperature 20
15°C, Humidity 60%R.H. Max, Recommendation Storing Term 6 months after shipped from factory.
•Storage
•Dimensions
•Ratings
•Part Number Description
Example
d
LD
HH
Unit : mm
RC1/2U 3.60.2
Style LD
283422mg
*Unit weight/pc.
d
+0.07
0.05
0.7
+0.8
0.7
9.5
*Value for reference
H
RC 1/2U 685 M B
Style
1/2U
0.5W
Product Type
*Refer to Tape and Packaging information
on pages 25.
*Packaging
Horizontal Forming
H
Bulk (straight)
B
52 mm Width Tape (Ammo Box)
TB
52 mm Width Tape (Reel)
TD
Rated Resistance
E12, 6 Series
e.g. : 685=6.8M ohm
106=10M ohm
Rated Dissipation
Tolerance on Rated Resistance
K10%
M20%
RC1/2U
Style
1M ohm
10M ohm
K(10%)
E12
M(20%)
E6
250Va.c. max.
or
125Va.c. max.
500
Rated Resistance
Range
350
Rated
Voltage
V
0.5
Rated Dissipation
at 70°C
W
Specified Line
Voltage
Isolation
Voltage
V
55125
Category Temperature
Range
°C
Tolerance on Rated
Resistance and
Perferred Number Series
for Resistors.
Note1. Required characteristic performance is based on JIS C 6406 and UL 1676.
Note2. The name of this, product is granted as Conductive Path, but UL1676 and the requirements as Discharge Path shown in CSA22, 2 No,1-94
are satisfied, but the products performance does not cover all the requirements as Conductive Path.
d
HH
LD
0.6 0.052.40.16.3 0.7RC1/4
3.60.2RC1/2
*Unit weight/pc.
422mg
222mg
Unit : mm
d
283
303
DLStyle
+0.07
0.05
0.7
+0.8
0.7
9.5
H
*Values for reference
1/4 0.25W
1/2 0.5W
RC 1/4 102 J B
Style
Product Type
Rated Resistance
E24, 12, 6 Series
e.g. : 2R2=2.2 ohm
102=1k ohm
*Packaging
B
H
TB
Horizontal Forming
52 mm Width Tape (Ammo Box)
TD
52 mm Width Tape (Reel)
Bulk (Straight)
Rated Dissipation
J
5%
K10%
M20%
Tolerance on Rated Resistance
RC1/2
RC1/4
0.5
0.25
500
100
–55~+125
1 ohm~22M ohm
1 ohm~5.6M ohm
350
250 J(± 5%)
: E24
K(±10%)
: E12
M( ±20%)
: E6
at –55
°C
at +125
°C
1 ohm
1.1k ohm
11k ohm
110k ohm
1.1M ohm
~
~
~
~
~
1k ohm
10k ohm
100k ohm
1M ohm
22M ohm
+6.5
+10
+13
+15
+20
~0
~0
~0
~0
~0
+1
0
0
0
0
~
~
~
~
~
–5
–6
–7.5
–10
–15
Style
Rated Dissipation
at 70°C
W
Rated Resistance
Range Rated Resistance
Range
Limiting Element
Voltage
V
Tolerance on Rated Resistance and
Perferred Number Series for Resistors
Combination of Rated Resistance Range and Temperature Coefficient of Resistance
Isolation
Voltage
V
Category Temperature
Range
°C
Temperature Coefficient of Resistance
%
Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
*Refer to Tape and Packaging information
on pages 25.
•Color Coding
Fifth color band: Green (Symbol of UL approved component)
Fourth color band: Resistance tolerance; K or M (In the case of M: Nil color band)
Third color band
(Multiplier)
Second color band
(Second significant figure)
Rated Resistance
First color band
(First significant figure)
Leaded Resistors
Pulse
RH
Most suitable resistor for high-tension circuits in which high precision is required for example, the physical and chemical
measurement equipment, X-ray apparatus, electron microscope, and etc.
Please refer to Specification (Reference) at the Website to confirm the specification for more detail.
•Features
•Dimensions
•Ratings
•Part Number Description
Example
L
d
D
HH
*Dimension "L" should be measured
between both side of D/2.
Note. Please contact KAMAYA for the details of marking.
d
0.8
H
3834.01.0
DL
14.51.0RH 1
1.03835.01.026.51.0RH 2
1.03835.01.039.02.0RH 3
1.03839.01.052.02.0RH 4
1.03839.01.077.02.0RH 6
1.03839.01.097.02.0RH 8
950mg
1,950mg
2,410mg
6,880mg
9,290mg
11.46g
Unit : mm
Style
*Values for reference
*Unit Weight/pc.
1.0W1
2.0W2
3.0W3
4.0W4
6.0W6
8.0W8
F
G
J
K
1%
2%
5%
10%
RH 8 D500M J B
Style
Product Type
Rated power
* Temperature Coefficient of Resistance
D
K100×10-6/°C
200×10-6/°C
Packaging
B Bulk
Tolerance on Rated Resistance
Rated Resistance
Available on demand
e.g.: 100M=100M ohm
1G00=1G ohm
RH 1 1.0 1.5
F
G
J
K
( 1%)
( 2%)
( 5%)
(10%)
44
RH 2 2.0 5 12.5 7.5
RH 3 3.0 10 25 15
RH 4 4.0 15 30 20
RH 6 6.0 20 40 30
RH 8 8.0 30 60 40
1R500
500<R5,000
100
200
Rated Dissipation
W
Tolerance on
Rated
Resistance
Limiting Element
Voltage
kV
Pulse Voltage
kV
Rated Resistance
Range
M ohm
Combination of Temperature Coefficient of Resistance and rated Resistance Range
Maximum Overload
Voltage
kV
Temperature Coefficient
of Resistance
10-6/°C
Style
Note1. Rated Voltage= (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
*Marking and label indication for
Temperature Coefficient Resistance
HVD : 100×10-6/°C
HVS : 200×10-6/°C
Packaging for Leaded Resistors
Z
tT
S
P
L2L1
W
Unit : mm
•Tape •Ammo Box
60±5
65±5
a
75±5
b
455±5
c
RC1/4
RC1/2
RC1/2U
A
A'
C2
C1
d
B
Y
•Tape & Reel (Code : TD) Unit : mm
*Value for reference
RC1/4
RC1/2
RC1/2U
75±5
78±1
14.5±0.5
260±5
Style C1B
60.4±1
A
TD
Code
280
*A' C2d
3
*Y
Unit : mm
Style PtW L1-L2TZS
1.0max. 3.2min.6.0±0.5 0.5max.1.0max.
5.08±0.38
＋1.6
−1.4
52.4
RC1/4
RC1/2
RC1/2U
275±5
•Horizontal Forming (Code : H)
A
t
B
RC1/2
3,000 260
24,000
13 0.04 52 2,000
30,000
16 0.05 5,000
30,000
13
13
0.04
RC1/2U
3,000 260
24,000
13 0.04 52 2,000
30,000
16 0.05 5,000
30,000
13 0.04
RC1/4
5,000 260
40,000
12 0.04 52 2,000
30,000
10 0.03 10,000
50,000
0.04
（100×5）
（100×5）
（200×5）
500
500
1000
ABt
10.0±0.5 1.5max.
H60RC1/4
12.5±0.5H62RC1/4
15.0±0.5
RC1/2
RC1/2U 1.8max.
H
5.0±0.5
Unit : mm
Style Code
Style Code
TB
52mm
Width
Tape
Indication labelWindow Indication
Label indication
cb
a
Style
Tape & Reel
Outer Carton
Ammo Box
Outer Carton
Bulk Packaging
Outer Carton
Q'ty /
Reel
(pcs.)
Reel Size
(mm) Q'ty /
Carton
(pcs.)
Gross
Weight
(kg)
Measure-
ment
(m3 )
Q'ty /
Carton
(pcs.)
Gross
Weight
(kg)
Measure-
ment
(m3 )
Q'ty /
Carton
(pcs.)
Gross
Weight
(kg)
Measure-
ment
(m3 )
Width of
Taping
(mm)
Q'ty /
Box
(pcs.)
M.P.Q.
Q'ty /
Plastic Bag
pcs.
Q'ty /
Inner
Carton
(pcs.)
( )
Leaded Resistors
High Voltage
http://www.kamaya.co.jp
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】25
1005 0402
1608 0603
3216 1206
1632 0612
2012 0805
3225 1210
4520 1808
4532 1812
InchMetric
Unit: mm
# : Reflow soldering process only.
L
1.0 ±0.05
1.6 ±0.1
1.6 ＋0.15/−0.1
W
0.5 ±0.05
0.8 ±0.1
0.8 ＋0.15/−0.1
1.25±0.1
T/Symbol
0.5 ±0.05 N
S
X
A
0.8 ±0.07
0.8 ＋0.15/−0.1
0.6 ±0.1
MB
0.25±0.05/−0.1
0.4 ±0.15
0.4 ±0.15
0.5 ±0.2
Series
General Purpose, High Capacitance, MW, HH
General Purpose, High Capacitance, MW, HH
General Purpose, High Capacitance
General Purpose, High Voltage
B
0.8 ±0.1 0.5 ±0.2
General Purpose, High Capacitance, High Voltage
0.4 ±0.2 OP
D
1.25±0.1 0.5 ±0.2
General Purpose, High Capacitance, High Voltage
0.4 ±0.2 OP
1.25±0.2 T
0.95max. 0.5 ±0.2 TT
2.0 ±0.2
2.0 ±0.15
I
1.25±0.2 0.5 ±0.2 High Capacitance
3.2 ±0.15 1.6 ±0.15
1.6 ±0.15
B
0.8 ±0.1 0.13max. Low Inductance
3.2 ±0.15
B
0.8 ±0.1 0.6 ±0.2 General Purpose, High Voltage
0.5 ±0.2 OP
T
0.95max. 0.6 ±0.2 TT
C
0.95±0.1 0.6 ±0.2
General Purpose, High Capacitance, High Voltage
0.5 ±0.2 OP
J
1.15±0.15 0.6 ±0.2 General Purpose
3.2 ±0.2 1.6 ±0.2 0.6 ±0.2 High Capacitance
1.25max. 0.6 ±0.2 TT
3.2 ±0.15
1.6 ±0.15 D
1.25±0.1 0.6 ±0.2
General Purpose, High Capacitance, High Voltage
0.5 ±0.2 OP
1.6 ±0.2 G
1.6 ±0.2 0.6 ±0.2
General Purpose, High Capacitance, High Voltage
0.5 ±0.2 OP
3.2＋0.3/−0.1 1.6 ＋0.3/−0.1 P
1.6 ＋0.3/−0.1 0.6 ±0.2
General Purpose, High Capacitance
3.2 ±0.3 2.5 ±0.2
T
0.95max. 0.75±0.25 TT
C
0.95±0.1 0.75±0.25 General Purpose, High Voltage
0.5 ±0.25
0.75±0.25
0.5 ±0.25
0.75±0.25
0.5 ±0.25
0.75±0.25
0.5 ±0.25
0.75±0.25
0.5 ±0.25
0.75±0.25
0.75±0.25
0.6 ±0.25
OP
D
1.25±0.1 General Purpose, High Voltage
OP
General Purpose, High Voltage
OP
3.2 ±0.4 2.5 ±0.3 G
1.6 ±0.2
High Voltage
S2, S3
M
2.5 ±0.3
High Voltage
4.5 ±0.4 2.03±0.25
D
1.25±0.1
S2, S3
High Voltage
K
2.0 ±0.2
General Purpose, S2, S3
OP
0.75±0.25
0.6 ±0.25
4.5 ±0.4 3.2 ±0.3
D
1.25±0.1
General Purpose, S2, S3
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
K#
#
2.0 ±0.2 OP
L
T
W
MBMB
•Characteristic
General Purpose
General Purpose
High Capacitance
NPO, X7R, Y5V 0402(1005)
0603(1608)
16V, 25V,
50V, 100V 0.5pF〜1uF
X7R, X5R, Y5V 0402(1005)
0603(1608)
6.3V, 10V, 16V,
25V, 50V 1uF〜100uF
Safety and
Power supply control Middle & High Voltage NPO, X7R, Y5V 0805(2012)
1206(3216)
0805(2012)
1206(3216)
1210(3225)
1812(4532)
0805(2012)
1206(3216)
1210(3225)
1812(4532)
1210(3225)
1812(4532)
200V, 250V, 500V, 630V
1kV, 1.5kV, 2kV, 3kV 0.5pF〜0.22uF
Application Series Dielectric Size Rated Voltage Capacitance
•Part Number Description
Example
Dielectric
B=X7R
N=NPO
X=X5R
F=Y5V
Size
Inch (Metric)
0402＝（1005）
0201＝（0603）
0603＝（1608）
0805＝（2012）
1206＝（3216）
1210＝（3225）
1808＝（4520）
1812＝（4532）
Capacitance
0R5＝0.5pF
R47＝0.47pF
1R0＝1pF
100＝10pF
101＝100pF
102＝1000pF
103＝0.01uF
104＝0.1uF
105＝1uF
106＝10uF
107＝100uF
500
0805 B
Package
B= Bulk
C= Bulk case
T=
7Inch width Reale
Electrode
L = Ag/Ni/Sn
C= Cu/Ni/Sn
Style
Size
18=0603
15=0402
21=0805
31=1206
32=1210
42=1808
43=1812
Product Type
OP＝
TT＝
HH＝
MW＝
S2＝
S3＝
OP 21
Style
104
Tolerance
A＝±0.05pF
B＝±0.1pF
C＝±0.25pF
D＝±0.5pF
F＝±1%
G＝±2%
J＝±5%
K＝±10%
M＝±20%
Z＝−20to＋80%
Rated Voltage
6R3＝6.3 Vdc
100＝10 Vdc
160＝16 Vdc
250＝25 Vdc
500＝50 Vdc
101＝100 Vdc
201＝200 Vdc
251＝250 Vdc
501＝500 Vdc
631＝630 Vdc
102＝1000 Vdc
152＝1500 Vdc
202＝2000 Vdc
302＝3000 Vdc
KCT
General purpose
High Capacitance
Ultra-small
Middle & High Voltage
Low Inductance
Example Low profile
Open-mode Design
High Q Low ESR
Microwave
Safety certified
1. General purpose, Board of PC etc.
2. Full support by Japanese Quality Assurance team.
•Features
•Dimensions
Please see Catalog of Walsin Technology Corporation. (Website: http://www.passivecomponent.com/) for detail information.
Multilayer Ceramic Capacitor
26 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
Capacitors
Film Capacitors Summary
General use
Standard
PFC circuit
in power
Large
capacitance
High voltage
High frequency circuit use
Across- the- line use
Surge absorber
C-R units
Style Series
Code Features Rated
Voltage
Capacitance
（μF）
Temp. Range
(℃)
Summary
About Nitsuko product, Please contact as follows.
■Compliance with RoHS requirement
  Our film capacitors (all products in the above list) comply with RoHS requirement.
FPB
MDX
MDS
MDD
MDL
MDD
FPD4
FPD5
CFD-N
CR
CRKH
FPS3
FPA
FPS
・ Small in size
・ Small in size
・ High temperature proof
・ Halogen-free
250VDC
450VDC
630VDC
250VDC
450VDC
630VDC
1250VDC
(500VAC)
35VDC
63VDC
450VDC
450VDC
125VAC
250VAC
125VAC
250VAC
250VAC
（275VAC）
250VDC
450VDC
630VDC
100VDC
250VDC
400VDC
630VDC
50VDC
63VDC
100VDC
250VDC
0.01〜10
0.01〜4.7
0.01〜2.2
0.47〜10
0.22〜4.7
0.068〜2.2
0.0022〜0.1
4.7〜22
10〜22
0.47〜2.2
0.033〜4.7
0.01〜2.2
0.1μF
＋120Ω
0.033μF
＋120Ω
0.01〜0.1μF
47, 100, 120Ω
0.01〜10
0.01〜3.3
0.01〜2.2
0.56〜10
0.18〜10
0.039〜4.7
0.01〜2.2
0.1〜2.2
0.1〜1.0
0.047〜0.47
0.01〜0.15
-40〜
＋85
(＋105)
-40〜
＋85
(＋105)
-40〜＋85
(＋110)
-40〜＋85
(＋105)
-40〜
＋105
-40〜
＋85
(＋105)
-40〜
＋85
-40〜
＋100
-40〜
＋105
-40〜
＋85
(＋105)
・ Small in size
・ Standard
・ Standard
・ Standard
・ High voltage series
・ For AC and DC
・ Low Noise
・ Needle flame test proof
・ For noise immunity test
・ Standard
・ C-R Unit
・ UL,VDE Safety Standard
・ C-R Unit
・ Lead pitch 5,7.5mm
Nitsuko Electronics Corporation
2031-1, Ogawara, Suzaka-shi, Nagano-ken, Postcode 382-0071
TEL (+81) 26-246-6351 FAX (+81) 26-245-6239  E-Mail: ec@nitsuko-ele.co.jp
Development・Sales Department
http://www.nitsuko-ele.co.jp/
-40〜
＋85
(＋105)
-40〜
＋85
(＋105)
0.47〜2.2
-40〜
＋85
(＋110)
450VDC
550VDC
・ Miniature and Large capacitance 
・ For high frequency and high ripple
0.47〜2.2
-40〜
＋85
(＋105)
NEW
Film Capacitors
•Dipped metallized film capacitors
•CR Units
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】27
http://www.kamaya.co.jp
Capacitors
28 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
1. Scope
This product handling manual is applied to parts for the surface
mounting that KAMAYA ELECTRIC CO., LTD. produce.
2. Storage
Consider the following four points for keeping the environment, the
storage method, and the storage period to maintain the qualities of
parts below.
2.1 Avoid storing in locations where corrosive gas is present (Sea
breezes, Cl2, H2S, NH3, SO2, NO2, etc.) or in dusty and moist
circumstances. Otherwise, it may result in deterioration of
performance and adversely affect the soldering.
2.2 Avoid keeping goods in high temperature and direct sunlight.
Otherwise, it may cause deformation of packing materials, and
adherence of parts on packing materials.
2.3 Please enforce First-In & First-Out for the use of parts in
consideration of the change in the environmental condition.
2.4 Store these products in the following environment.
Temperature: 5 to 35℃
Humidity : 25 to 75％
Terms of guarantee: 2 years
3. Pattern Design
To solder parts on the printed circuit board properly, it is necessary
to take a careful attention in design stage.
It is necessary to consider the land pattern position by mounting
equipment, method of soldering (flow or reflow), and material of
print circuit board. Moreover, it is necessary to consider the position
of adhesive and the array of parts at the flow soldering. Refer to
Page 30 for recommended land pattern of Kamaya product
3.1 Strength of parts might decrease under the condition that the
width or the shape of land pattern is too large, or the bend of the
substrate occurs when gap of soldering position is generated or
there are a lot of solder quantities.
3.2 Interval of parts should not narrow too much for the short-circuit
prevention.
In general, it is safer to open more than 0.5mm from the
positioning accuracy of mounting.
3.3 The resistor is a generation of heat source.
The pattern design that opens enough distance is necessary
from other generation of heat parts.
Especially, please do enough derating of the rated dissipation
for a high voltage circuit after considering the temperature rises
of the adjoining generation of heat parts.
3.4 When the flow soldering is executed, soldering differs
depending on the direction where the printed circuit board is
thrown.
   Figure-1
3.5 Examples of division of land pattern (Cross-sectional view)
  a. Land share with lead component.
  b. Mounted near Chassis.
  c. Side by side array.
   Figure-2
3.6 Avoid the component placement to the following places.
1) Near cutting line of print circuit board.
2) Place where print circuit board is distorted and mechanical stress
is received easily.
Figure-3
Layout of resistors near the cutting line
of print circuit board.
Improper A → B → C&D → Proper
4. Print Circuit Board
Please consider following respects.
4.1 Thermal diffusivity (thermal conductivity)
  Thermal diffusivity through the print circuit board is necessary
for generation of heat from parts.
Especially, use the print circuit board with high thermal
conductivity when the calorific value is large.
4.2 Resistance to soldering heat
Select a heatproof, good substrate to soldering parts.
Because it often solders two or more times.
PCB flows direction
Bad Good
Easy to become a defective soldering.
Chassis Chassis
Land
Lead of component Lead of component
Failure example Improvement example
a) Land share with lead component.
b) Mounted near chassis
Solder (for Grounding) Solder resist
Solder resist
Land
Failure example Improvement example
c) Side by side array
Failure example Improvement example
Solder resist
Ｃ
Ａ
Ｄ
Ｂ
Board1 Board2
SMD Product handling manual
Information
4.3 Pull peel strength of land pattern
  Consider that the print circuit board corresponding to the land
pattern size and sticking strength with the copper foil.
4.4 Bend strength
  The stress in the electrodes and parts body, when the PCB
bends by weight and external stress of parts, causes the joining
electrode flaking off and the crack. Consider the bend ability of
print circuit board.
5. Adhesive
When an adhesive is applied, the spread should be set
corresponding to each part so that there are no overflow into the
land or no dropout of the parts.
5.1 Strength of adhesive must be strong not to fall and move parts
in the mounting process.
5.2 Stiffen at the low temperature as much as possible. Do not heat
parts as the cure temperature.
5.3 Keep without stringy, slumping adhesion, and dewetting that
solder can not adhere to parts.
5.4 After soldering, there must be no causticity.
6. Mounting
Please consider following to install parts in the printed circuit board.
1) Gap of installing position
2) Product floating from land pattern
3) Mechanical stress to overcoat of parts.
6.1 Do not touch with bare-handed in the electrode and wash it well
with an organic solvent when the foreign body such as oils and
fats adheres.
6.2 Mounting trouble of static electricity may occur when you touch
or rub the part, packaging materials and the cover tape of the
taping especially. When you deal with parts on the worktable,
please execute the static electricity prevention measures (like
the electrification prevention mat).
7. Soldering
7.1 The lead free is recommended in the solder paste.
Select appropriate solder paste after executing the evaluations
of soldering and strength of bond, etc.
7.2 Select flux without the causticity.
7.3 The conditions of temperature and time should be well
considered in the soldering process so that any warp or twist in
the printed circuit board may not grow.Moreover, the electrode
might flake off when the substrate is bent after it solders or the
high impact is given parts or around it.
7.4 In VPS Reflow, preheat well so that the difference of
temperature may not big too much between parts and inside of
furnace. A big difference of temperature cause drop out of parts.
7.5 Do not rub the electrodes of resistor with soldering iron. The
electrode may flake off when the iron is pressed on the
electrode. Do not raise the temperature of the soldering iron
more than necessary when the side electrode of parts is formed
with the Ag resin.
Figure-4
7.6 The overcoat and the main body may be chipped off when you
hold the parts strongly with tweezers.
  Do not use parts detached from the print circuit board once
again.
7.7 Please refer to page 31 for our recommended soldering
conditions.
8. Cleaning
The remaining of the flux on print circuit board with part mounted
may cause a bad effect on humidity resistance and corrosion
resistance. Please use a rosin flux with low chlorine-containing, or
alcoholic and hydrocarbon solvent.
9. Other Notes
9.1 The use of the products mentioned in this catalog refers to
consumer applications that are available on the open market.
9.2 There are cases which high levels of reliability distinctive from
consumer applications sold on the open market are necessary
for electrical components which are used in equipment that
could effect human life or create huge social loss owing to
defect in medical equipment, space equipment, nuclear power-
related equipment, vehicle mounted equipment, aircraft and
other equipment. When you examine the use in the above-
mentioned equipment or for uses not mentioned within this
catalog, ensure that you consult with our sales department prior
to deployment.
9.3 As the use of resistors and surface-mounted parts used in all
electrical components, especially resistors used in high-voltage
circuits and in circuits prescribed for safely regulations, will be
greatly affected by the circuit used, the method of mounting, the
material, and environmental conditions, ensure that you consult
with our sales department prior to deployment when examining
the viability of use in characteristic circuits, mounting methods,
material and under characteristic environmental conditions,
9.4 Thoroughly verify performance and reliability when using under
the following characteristic environmental conditions :
(1) Use within a liquid environment (Water, oil, liquid chemical,
organic solution, etc.)
(2) Use in direct sunshine. Outdoors in heavy dew, in dusty
environments, or where corrosive gas is present (Sea
breezes, Cl2, H2S, NH3, SO2, NO2, etc.)
(3) Use in environments with strong electrostatic or magnetic
waves exists.
(4) Use nearby flammable substances.
(5) Use with the resistors coated in resin, etc.
(6) Use of water or water solution for flux cleaning after
unwashed soldering or soldering.
(7) Use under environment of condensation
9.5 Ensure that the condition of the mounting is evaluated and
verified on circuit boards when subjected to overloads in the
form of pulses or surges, etc.
9.6 Take cares handling these products as they may be damaged
and become defective if subject to impact, such as dropping.
Ｆ Ｆ Flaking off
Ａ Ｂ Ｃ
SMD PRODUCT HANDLING MANUAL
Information
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】29
http://www.kamaya.co.jp
30 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
•Others
(1) Please contact Kamaya Sales Dept. for other products and further details.
(2) Please carry out an enough mounting evaluation when use these patterns.
Size Flow soldering Reflow soldering
Metric Inch ABXYABXY
0402
0603
1005
1608
2012
3216
3225
5025
6332
01005
0201
0402
0603
0805
1206
1210
2010
2512
1.0
1.3
2.2
2.2
3.9
5.2
2.6
3.1
4.3
4.3
6.3
7.6
0.8
1.25
1.6
2.5
2.5
3.2
Not applied
0.8
0.9
1.05
1.05
1.2
1.2
0.18
0.3
0.5
1.0
1.3
2.2
2.2
3.9
5.2
0.58
0.9
1.3
2.0
2.7
3.9
3.9
5.9
7.2
0.2
0.3
0.5
0.8
1.25
1.6
2.5
2.5
3.2
0.2
0.3
0.4
0.5
0.7
0.85
0.85
1.0
1.0
Flow soldering Reflow soldering
Land pattern
AA
1
2
2
3
4
Style
RAC10 2D
RAC10 1A
RAC10 4D
RAC16 4D
RAC16 8U
RAC16 8D
P
0.65
0.5
0.8
0.64
0.5
Terminals style
C
C
C
C
1.0 2.6 0.35 0.45 0.8
BCXY
Not applied
Not applied
0.5
0.5
1.0
1.0
1.0
1.3
1.3
2.0
2.0
2.0
0.34
0.15
0.35
0.32
0.2
0.33
0.35
0.45
0.32
0.3
0.4
0.4
0.5
0.5
0.5
B C X Y
CX
Y
X
YA
B
P
Y
X
Y A
B
P
CX
CX
Y
X
Y A
B
P
Land pattern 1 Land pattern 2
Land pattern 3
•Application
All KAMAYA Surface Mount Devices
Note: This land pattern is not supported by the mounting evaluation.
This is reference information only.
2.Chip network type (No. of terminal: Multiple)
•Recommended land pattern (Reference)
1.Square chip type (No. of terminals: 2)
Y
X
Y A
B
P
CX
Land pattern 4
X
Y A
B
SMD Product handling manual (RECOMMENDED LAND PATTERN)
Y
※For RLP, MLP please refer to the page 8.
Information
1. Reflow soldering
1.1 Recommended condition of Sn-Pb solder.
Reflow times: 2 times
2. Flow soldering (Recommended condition of Sn solder and Sn-Pb solder)
1.2 Recommended condition of Sn solder
Reflow times: 2 times
3. Soldering Iron (Recommended condition of Sn solder and Sn-Pb solder)
(1) Temperature of soldering iron tip: 300°C, Duration: 10 s max.
(2) Temperature of soldering iron tip: 350°C, Duration: 3 s max.
•Others
(1) Please contact Kamaya Sales department for further information.
(2) Please carry out an enough mounting evaluation when use this profile.
Note: This soldering condition is not supported by the mounting evaluation.
This is reference information only.
200
100
230
180
150
200
150
100
80〜120s
245〜250℃
60〜120s 3〜5s
110〜130℃
Preheat
Preheat
Preheat
230〜240℃
Temperature (°C)Temperature (°C)
Temperature (°C)
Peak245〜250℃
60〜120s 10〜30s
10s.max.
40〜30s
200
150
100
•Application
All KAMAYA Surface Mount Devices
•Recommended soldering condition (Reference)
SMD Product handling manual (RECOMMENDED SOLDERING CONDITION)
Information
http://www.kamaya.co.jp
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】31
32 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
Term Explanation
R0
R−R0
T−T0
1
• Resistors
Rated Dissipation
The maximum value of the electric power that can continuously be impressed to the resistor at the ambient temperature provided
for within the category temperature range is indicated.
The derated values of dissipation for temperatures in excess of 70℃ shall be indicated by the derating Curve.
Please note that the chip resistor networks provide for the rated dissipation of each element and each package when you use it.
Rated Voltage
The maximum value of the D.C or r.m.s. voltage that can continuously be impressed to the resistor at the ambient temperature provided for
within the range of the category temperature range is indicated.
Rated Voltage = (Rated Dissipation) (Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
However, Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher
than the critical resistance value.
Critical Resistance Value
Critical resistance value is the resistance value at which the rated voltage is equal to the limiting element voltage.
Below critical resistance value, please use the rated voltage as the limiting element voltage.
Limiting Element Voltage
The maximum value of the d.c. or r.m.s. voltage that can continuously be impressed to the resistor and the resistive element is indicated.
Limiting Element Voltage that provides for the kind and each shape is different.
Isolation Voltage
The maximum value of the d.c. voltage that can be impressed for 1 minute the one that the electrode (terminal) was lumped together and
between the insulation exterior or substrates is indicated.
When the voltage that exceeds the isolation voltage is impressed for the electrode and the insulation exterior (substrate), the insulation
exterior might be destroyed by generation of heat and the direct current electrolysis action by the leakage current.
Voltage proof
The r.m.s voltage is impressed for 1 minute the one that the electrode (terminal) was lumped together and between the insulation
exterior or substrates, and the insulation exterior indicates the maximum value of the voltage that breakdown or flashover.
Category Temperature Range
The ambient temperature of the resistor that can continuously be used adding a regulated rated load (electric power) is shown.
It is not a temperature of air outside of an electronic equipment, and it is necessary to compare it with the ambient temperature
in the electronic equipment in which the resistor is built in.
Derating Curve
The derated values of dissipation for temperatures in excess of 70℃
shall be indicated by the following Curve.
Variation of resistance with temperature (Temperature Coefficient of Resistance: TCR)
The change of resistance 1℃ rate of the resistor within the range of the category temperature (category temperature range) is shown.
  Temperature Coefficient of Resistance: TCR（×10-6/℃）= ×     ×10-6
R :Measured resistance at T℃
R0 :Measured resistance at T℃
T :Measured test temperature (℃)
T0 :Measured base temperature (℃)
Especially, because the resistance temperature coefficient tends the large dependence of the measurement resistance
on the measuring method, RLC/RLS/RCC/RLP&MLP needs noting.
Percentage of the rated dissipation
(current)(%)
Area of recommended operation
Ambient Temperature (°C)
100
0
55 125 15570
http://www.kamaya.co.jp
Information
Chip R esistors
General purpose
Term Explanation
• Chip Fuses & Fusible Resistors
Joule Heat
It is the heat generated by the current.
The fuse melts inside by joule heat, and interrupts the current.
Fusible Characteristics
Relation between current (I) and fusion time (t) that flows to fuse.
It shows for the fusible Resistors by the relation between an impressed electric power (W)
and the fusion time (W-t characteristic).
Rated Voltage
It shows maximum voltage value fuse can work properly.
It is the maximum voltage value in which the circuit can be safely interrupted after the fuse workings.
On selecting a fuse, it is necessary to confirm that the maximum rated voltage is less than rated voltage.
Interrupting Rating
It shows Maximum voltage(Rated voltage) and Maximum current for an interrupting circuit safely.
Maximum voltage and Maximum current should be applied below interrupting rating.
Working Temperature Range
It is temperature range fuse can works with specified condition,
Ambient temperature is to be within category temperature range.
Rated Current
A value of current which the fuse can be complied with, according to the test conditions.
It is different from the maximum current that applied to fuses, considering a long life span, the deratings are required.
Steady - State Current
It is current value at time that regularly flows to circuit regularly.
Deratings
 1）Nominal Derating
   It is derating value for rated current.
   The reduction rate is depended on the type of fuse.
 2）Temperature Derating
   It is ambient temperature derating value for rated current.
   The reduction rate is depended on the types of fuse and ambient temperature.
In-rush Current(Rush current)
Current that rapidly flows on circuit when power supply is turned on.
In many cases In-rush Current is bigger than Steady-state Current.
Chip fuses are confirmed to withstand In-rush Current.
Internal Resistance Value
An internal resistance values shown in this document include values in any materials of fuse,
fuse element, outer terminations etc. Please refer to "section 10" for further information.
Additionally, resistance values are different depending on Temperature and Steady-state Current.
Maximum Open Circuit Voltage
Maximum open circuit voltage is the value of voltage applicable to both ends of resistors, when a resister is open condition in a circuit.
This voltage shall be corresponding to 1,000 times the rated dissipation or maximum open circuit which is the less severe.
Information
http://www.kamaya.co.jp
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】33
34 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
•Color coding
Product Marking
Black
Color
0
1st color band
1st figure
0
2nd color band
2nd figure
100
3rd color band
Multiplier
Brown 1110
1F(1%)
Red 210
2G(2%)
Orange 310
3
Yellow 4 104
Green 510
5
Blue 6 106
Purple 710
7
Gray 810
8
White 910
9
Gold 10-1 J(5%)
Silver 10-2 K(10%)
Not colored
2
3
4
5
6
7
8
9
M(20%)
4th color band
Resistance tolerance
Black
Color
0
1st color band
0
3rd color band
100
4th color band
Brown 1 1 101F(1%)
Red 2 102G(2%)
Orange 3 103
Yellow 4 104
Green 5 105
Blue 6 106
Purple 7 107
Gray 8 108
White 9 109
Gold 10-1
D(0.5%)
Silver 10-2
C(0.25%)
2
3
4
5
6
7
8
9
0
2nd color band
1
2
3
4
5
6
7
8
9
B(0.1%)
5th color band
7
1st color band
Purple
4th color band
Gold
10-1
6
2nd color band
Blue
5th color band
Brown
1
1st color band
Brown
120k ohm J
3rd color band
Yellow
5%104
2
2nd color band
Red
4th color band
Gold
• Three - color band or four - color band system • Five - color band system
• Example • Example
•Rated resistance symbols
The symbols to indicate rated resistance are depicted in 3 characters (for the E6, E12, and E24 series) or 4 characters (for the E48, E96 and E192 series) as indicated
below.
In the case of 3 characters, the first and second character represent the effective numeral, and the third character is the multiplier following the effective numeral.
In the case of 4 characters, the first, second and third character represent the effective numeral, and the fourth character is the multiplier following the effective numeral.
When a decimal point exists, the decimal point is represented by an R for all effective numerals.
1st figure
2nd figure
3rd figure Multiplier
Resistance tolerance
*RC1/2U : Please refer to page 24.
R15
Rated resistance symbols
0.15 ohm
1R5 1.5 ohm
150 15 ohm
151 150 ohm
152 1.5k ohm
153 15k ohm
154 150k ohm
155 1.5M ohm
156 15M ohm
157 150M ohm
Resistance value
• 3-Digit (example)
R154
Rated resistance symbols
0.154 ohm
1R54 1.54 ohm
15R4 15.4 ohm
1540 154 ohm
1541 1.54k ohm
1542 15.4k ohm
1543 154k ohm
1544 1.54M ohm
1545 15.4M ohm
1546 154M ohm
Resistance value
• 4-Digit (example) •
Resistance values of
100M ohm and greater(example)
100G
Rated resistance symbols
100G ohm
10G0 10G ohm
1G00 1G ohm
100M 100M ohm
Resistance value
*The letters M and G are used as multipliers
for 106 and 109 respectively of the
resistance value expressed in ohms.
1%
12 10,000 (ohm) 5%
8
768 0.1 (ohm) 1%
76.8 ohm F
3rd color band
Gray
*For three-color band system the 4th color band is eliminated
(Resistance tolerance is 20%).
Information
•Code Tolerances
Standard Resistance Values and Symbols
•
Temperature Characteristics Symbol Table
E×10-6/°C
C×10-6/°C
K×10-6/°C
D×10-6/°C
A×10-6/°C
M×10-6/°C
25
50
100
200
500
1,000
N×10-6/°C70
H50%
N30%
M20%
K10%
J5%
G2%
F1%
D0.5%
C0.25%
B0.1%
E192
100
102
105
107
110
113
115
118
121
124
127
130
133
137
140
143
147
150
154
158
162
165
169
174
178
182
187
191
196
200
205
210
100
101
102
104
105
106
107
109
110
111
113
114
115
117
118
120
178
180
182
184
187
189
191
193
196
198
200
203
205
208
210
213
121
123
124
126
127
129
130
132
133
135
137
138
140
142
143
145
147
149
150
152
154
156
158
160
162
164
165
167
169
172
174
176
E96
100
105
110
115
121
127
133
140
147
154
162
169
178
187
196
205
E48
10
11
12
13
15
16
18
20
E24
10
12
15
18
10
15
E12E6 E192
464
475
487
499
511
523
536
549
562
576
590
604
619
634
649
665
681
698
715
732
750
768
787
806
825
845
866
887
909
931
953
976
464
470
475
481
487
493
499
505
511
517
523
530
536
542
549
556
825
835
845
856
866
876
887
898
909
920
931
942
953
965
976
988
562
569
576
583
590
597
604
612
619
626
634
642
649
657
665
673
681
690
698
706
715
723
732
741
750
759
768
777
787
796
806
816
E96
464
487
511
536
562
590
619
649
681
715
750
787
825
866
909
953
E48
47
51
56
62
68
75
82
91
47
56
68
82
47
68
E24E12E6
E192
215
221
226
232
237
243
249
255
261
267
274
280
287
294
301
309
316
324
332
340
348
357
365
374
383
392
402
412
422
432
442
453
215
218
221
223
226
229
232
234
237
240
243
246
249
252
255
258
383
388
392
397
402
407
412
417
422
427
432
437
442
448
453
459
261
264
267
271
274
277
280
284
287
291
294
298
301
305
309
312
316
320
324
328
332
336
340
344
348
352
357
361
365
370
374
379
E96
215
226
237
249
261
274
287
301
316
332
348
365
383
402
422
442
E48
22
24
27
30
33
36
39
43
22
27
33
39
22
33
E24E12E6
•Significant Figure of Resistance Value
*Please refer to each page for standard values of each parts.
Direct Current
Calculating
Formula EI
Power(P)
Formula of Ohm's Law
I2RE2
RIR
Voltage(E)
PR P
I
Current(I)
P
E
E
R
P
R
Resistance(R)
P
I2
E2
P
E
I
1012 10910610310-3 10-6 10-9 10-12
Code
Multiplier
T(tera) G(giga) p(pico)
Numerical Symbols and Multipliers
Code M(mega) k(kilo) m(milli)
μ
(micron)
n(nano)
Numerical Symbols and Multipliers
CodeCode
Temperature coefficient of resistance
Tolerance on rated resistance
Information
http://www.kamaya.co.jp
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】35
36 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
http://www.kamaya.co.jp
Kamaya Shipping Label
Kamaya products are put a shipping label on reel or other packaging.
Refer to the sample of the shipping label as follows.
•Example for chip resistors
RMC1/16K 272F TP 1608size, Fixed Thick Film Chip Resistor, 2.7k ohm F(±1%)
(1)Product type(Style, Temperature coefficient of resistance, Rated resistance, Tolerance, Packaging)
(2)Parts number from customer (P/N)
(3)Quantity
(4)Shipping Lot Number (L/N)
(5)Manufacturer
(6)Internal code 1
(7)Internal code 2
*There are cases in which (2) and (7) are not shown on Kamaya shipping label.
*Please contact Kamaya sales department, if you need to confirm this label specification.
(1) (7)
(3)
(2)
(6)
(4)
(5)
RMC1/16 K 272F TP 01
P/N XXXX
L
/
N 071412282H （
70815
）
KAMAYA
OHM
2 . 7
K
Ω
F（52−50H） 5000PCS
http://www.kamaya.co.jp
Information
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Walsin:
RGC1/16C5102DTP RGC1/16C1472FTP RGC1/16C6801DTP RGC1/16C3301FT RGC1/16C1072FTP
RGC1/16C1004FTP RGC1/16SC6813DTH