E/H (Military M/D55342)
www.vishay.com Vishay Dale Thin Film
Revision: 15-Jul-16 1Document Number: 60018
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QPL MIL-PRF-55342 Qualified
Thin Film Resistor, Surface Mount Chip
Thin Film Mil chip resistors feature all sputtered wraparound
termination for excellent adhesion and dimensional
uniformity. They are ideal in applications requiring stringent
performance requirements. Established reliability is assured
through 100 % screening and extensive environmental lot
testing.
CONSTRUCTION
FEATURES
• Established reliability, “S” and “V” failure rate level
(10 ppm), C = 2
• High purity alumina substrate
• Wraparound termination featuring a tenacious adhesion
layer covered with an electroplated nickel barrier layer for
+150 °C operating conditions
• Very low noise and voltage coefficient
(< -25 dB, 0.5 ppm/V)
•Non-inductive
• Laser-trimmed tolerances ± 0.1 %
• Wraparound resistance less than 0.010 typical
• In-lot tracking less than 5 ppm/°C
• Complete MIL-testing available in-house
• Antistatic waffle pack or tape and reel packaging available
• Military / aerospace / QPL
TYPICAL PERFORMANCE
Note
• Values listed are a guide, refer to MIL spec for value/tolerance allowance
Adhesion Layer
High Purity
Alumina Substrate
Nickel Barrier
Solder
Coating
Passivation Resistor Film
ABSOLUTE
TCR 25
TOL. 0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Tamelox resistor film (passivated nichrome) -
Resistance Range 10 to 6.19 M-
TCR: Absolute ± 25 ppm/°C to ± 300 ppm/°C -55 °C to +125 °C
Tolerance: Absolute ± 0.1 % to ± 10 % +25 °C
Stability: Absolute R ± 0.02 % 2000 h at +70 °C
Stability: Ratio --
Voltage Coefficient 0.1 ppm/V -
Working Voltage 30 V to 200 V -
Operating Temperature Range -55 °C to +150 °C -
Storage Temperature Range -55 °C to +150 °C -
Noise < - 25 dB -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C
COMPONENT RATINGS
CASE SIZE
POWER
RATING
(mW)
WORKING
VOLTAGE
(V)
RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE
E
(0.1 %, 0.25 %, 0.5 %)
E
(1 %, 2 %, 5 %)
H, K, L, M
(0.1 %, 0.25 %, 0.5 %)
H, K, L, M
(1 %, 2 %, 5 %)
M55342/01 50 40 49.9 to 150K 49.9 to 150K 20 to 150K 20 to 150K
M55342/02 125 40 49.9 to 301K 49.9 to 301K 20 to 301K 20 to 301K
M55342/03 200 75 49.9 to 649K 49.9 to 649K 10 to 649K 10 to 649K
M55342/04 150 125 49.9 to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M
M55342/05 225 175 49.9 to 3.16M 49.9 to 3.16M 10 to 3.16M 10 to 3.16M
M55342/06 150 50 49.9 to 475K 49.9 to 475K 10 to 475K 10 to 475K
D55342/07 250 100 49.9 to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M
M55342/08 800 150 49.9 to 4.02M 49.9 to 4.02M 10 to 4.02M 10 to 4.02M
M55342/09 1000 200 49.9 to 6.19M 49.9 to 6.19M 10 to 6.19M 10 to 6.19M
M55342/10 500 75 49.9 to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M
M55342/11 50 30 49.9 to 100K 49.9 to 100K 20 to 100K 20 to 100K
M55342/12 100 50 49.9 to 258K 49.9 to 261K 10 to 258K 10 to 261K
E/H (Military M/D55342)
www.vishay.com Vishay Dale Thin Film
Revision: 15-Jul-16 2Document Number: 60018
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches
CASE SIZE TERM. L W T D E
M55342/01 B 0.055 ± 0.006 0.025 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.015 ± 0.005
M55342/02 B 0.055 ± 0.006 0.050 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.015 ± 0.005
M55342/03 B 0.105 ± 0.007 0.050 ± 0.005 0.010 to 0.033 0.015 ± 0.005 0.015 ± 0.005
M55342/04 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
M55342/05 B 0.230 ± 0.007 0.075 ± 0.005 0.010 to 0.033 0.020 ± 0.005 0.020 ± 0.005
M55342/06 B 0.080 ± 0.006 0.050 ± 0.005 0.010 to 0.033 0.016 ± 0.008 0.015 ± 0.005
D55342/07 B 0.126 ± 0.008 0.063 ± 0.005 0.010 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010
M55342/08 B 0.209 + 0.009/- 0.018 0.098 ± 0.005 0.010 to 0.033 0.020 ± 0.005 0.020 ± 0.005
M55342/09 B 0.259 + 0.009/- 0.015 0.124 ± 0.005 0.010 to 0.033 0.020 ± 0.005 0.020 ± 0.005
M55342/10 B 0.105 ± 0.007 0.100 ± 0.005 0.010 to 0.033 0.015 ± 0.005 0.015 ± 0.005
M55342/11 B 0.040 ± 0.005 0.025 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.015 ± 0.005
M55342/12 B 0.064 ± 0.006 0.032 ± 0.005 0.010 to 0.033 0.012 ± 0.005 0.015 ± 0.005
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST MIL-PRF-55342 LIMITS
(R ±)
VISHAY PERFORMANCE
(R ±)
Thermal Shock 0.1 % 0.020 %
Low Temperature Operation 0.1 % 0.025 %
Short Time Overload 0.1 % 0.050 %
High Temperature Exposure 0.1 % 0.009 %
Resistance to Bonding 0.2 % 0.006 %
Moisture Resistance 0.2 % 0.004 %
TCR ± 25 ppm/°C < 15 ppm/°C
Life (2000 h at + 70 °C) 0.5 % 0.02 %
Life (10 000 h at + 70 °C) 2.0 % 0.04 %
D
W
L
T
E
MECHANICAL SPECIFICATIONS
Resistive Element Tamelox
Substrate Material Alumina
Chip Terminations Solder over nickel
Fused Solder Plated solder 90/10
FSCM CAGE # - 57489
E/H (Military M/D55342)
www.vishay.com Vishay Dale Thin Film
Revision: 15-Jul-16 3Document Number: 60018
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Only add a V at the end of part number to specify Vishay Dale Thin Film for K, L and M TCR and tolerance 1 % and higher.
(2) Option 1 marking only. Case sizes 01, 02, 11, and 12 not available due to size.
(3) Failure Rate U and V require Group A and B testing on a Production Lot Basis.
DERATING
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342E06B1C00RTS
GLOBAL
MODEL
TCR
CHARACTERISTIC
CASE
SIZE TERMINATION OHMIC VALUE FAILURE
RATE PACKAGING THIN FILM
CODE
(1)
M55342
or
D55342
(/07 size
only)
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
L = 200 ppm/°C
M = 300 ppm/°C
01
= 0502
02
= 0505
03
= 1005
04
= 1505
05
= 2208
06
= 0705
07
= 1206
08
= 2010
09
= 2512
10
= 1010
11
= 0402
12
= 0603
B
= Solderable Three digits and a letter. Letter
identifies tolerance, acts as
multiplier and decimal locator.
M
= 1.0 %
per 1000 h
P
= 0.1 %
per 1000 h
R
= 0.01 %
per 1000 h
U
= 0.01 %
per 1000 h
(3)
S
= 0.001 %
per 1000 h
V
= 0.001 %
per 1000 h
(3)
C
= Non ER
version
Standard Packaging:
BS
=BULK
100 min., 1 mult
WS
=WAFFLE
100 min., 1 mult
W0
=WAFFLE
100 min.,100 mult
TAPE AND REEL
T0
= 100 min., 100 mult
T1
= 1000 min., 1000 mult
T3
= 300 min., 300 mult
T5
= 500 min., 500 mult
TF
=
Full reel ( 2K, 4K, or
5K dependent on case
size ) per tape and reel
document 60034
TS
= 100 min., 1 mult
Special Packaging:
WAFFLE
WI
= 100 min., 1 mult
(item single lot date code)
WP
=100 min., 1 mult
(package unit single lot
date code)
TAPE AND REEL
TI
= 100 min., 1 mult
(item single lot date code)
TP
= 100 min., 1 mult
(package unit single lot
date code)
V
for
K, L and M
TCR
W/tolerance
1 %
M = Part
marked (2)
MULTIPLIER
Tolerance 1
1 k
1 M
0.1 % A B C
0.25 % R U V
0.5 % W Y Z
1 % D E F
2 % G H T
5 % J K L
10 % M N P
Historical Part Number example: M55342K06B5E60R (for reference purposes only)
M55342 K 06 B 5E60 R
SERIES TCR
CHARACTERISTIC CASE SIZE TERMINATION VALUE AND
TOLERANCE FAILURE RATE
Ambient Temperature °C
0
20
40
60
80
100
Percent of Rated Wattage
-75 -50 -25 0 25 50 75 100 125 175150
5342 06BEM5 1C 0RT0 S V
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 1Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay Dale Thin Film Land Patterns
1. Scope
This technical note provides sample land patterns for Vishay Dale Thin Film SMT resistive products. The following drawings are
based on IPC-SM-782 Surface Mount Design and Land Pattern Standard. These drawings are for reference only Vishay Thin
Film recommends that the user contacts their PC board supplier for actual land patterns required. The pads are intended for
lead (Pb)-free and tin / lead solder types.
2. Product Series
Thin Film Surface Mount Chip Resistors (FC, L, P, PTN, PLT, PLTT. PLTU, PAT, PATT, PNM, M/D55342 QPL Series)
0.072
(1.829)
0.024
(0.610)
0.025 (0.635)
0.022
(0.559)
0402 Land Pattern
0.082
(2.083)
0.027
(0.686)
0.031 (0.787)
0.020
(0.508)
0502 Land Pattern
0.083
(2.108)
0.052
(1.321)
0.031 (0.787)
0.021
(0.533)
0505 Land Pattern
0.092
(2.337)
0.034
(0.864)
0.031 (0.787)
0.030
(0.762)
0603 Land Pattern
0.105
(2.667)
0.052
(1.321)
0.031 (0.787)
0.043
(1.092)
0705 Land Pattern
0.130
(3.302)
0.052
(1.321)
0.032 (0.813)
0.066
(1.676)
1005 Land Pattern
0.156
(3.962)
0.067
(1.702)
0.036 (0.914)
0.084
(2.134)
1206 Land Pattern 0.190
(4.826)
0.054
(1.372)
0.037 (0.940)
0.116
(2.946)
1505 Land Pattern
0.252
(6.401)
0.100
(2.540)
0.049
(1.245)
0.154
(3.912)
2010 Land Pattern
0.131
(3.327)
0.101
(2.565)
0.033 (0.838)
0.065
(1.651)
1010 Land Pattern
0.275
(6.985)
0.076
(1.930)
0.050
(1.270)
0.175
(4.445)
2208 Land Pattern
0.300
(7.620)
0.125
(3.175)
0.049
(1.245)
0.202
(5.131)
2512 Land Pattern
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 2Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thin Film Surface Mount Chip Resistors (PHP, PCAN Series)
Thin Film Surface Mount Chip Resistors Long Axis Termination (L Series)
0.0920
0.0340
0.0390
0.0140
0603 Land Pattern
0.1050
0.0520
0.0425
0.0200
0805 Land Pattern
0.1730
0.0710
0.0755
0.0220
1206 Land Pattern
0.2910
0.1260
0.0910
0.1090
2512 Land Pattern
0.091
(2.311)
0.146
(3.708)
0.030 (0.762 )
0.031 (0.787)
0612 Land Pattern
0.154
(3.912)
0.272
(6.909)
0.035 (0.889)
0.084
(2.134)
1225 Land Pattern
0.076
0.076
0.090
(2.286)
0.030 (0.762)
0.016 (0.406)
0508 Land Pattern
0.131
(3.327)
0.210
(5.334)
0.030 (0.762)
0.071
(1.803)
1020 Land Pattern
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 3Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Networks (MPM, MP3, MP4 Series)
Surface Mount Networks SOIC Narrow Body 150 mils (ORN, CSO, MOMC, HTRN, AORN, MORN Series)
0.040
(1.016)
0.0865
(2.197)
0.055
(1.397)
0.040
(1.016)
0.040
(1.016)
SOT-23 (MPM, MPMA)
0.025 (0.635) 0.025 (0.635)
0.0765
(1.943) 0.0765
(1.943)
0.045
(1.143) 0.045
(1.143)
0.0295 (0.749)
0.059
(1.499) (1.499)
0.038
(0.965)
0.059
0.0525
(1.334)
SC70-3 (MP3) SC70-4 (MP4)
0.085
(2.159)
0.024 (0.610)
0.050
(1.270)
0.205
(5.207)
SOIC-8
(ORN, HTRN, AORN, CSO-8)
0.085
(2.159)
0.024 (0.610)
0.050
(1.270)
0.205
(5.207)
SOIC-14
(NOMC-14, NOMCA-14, CSO-14)
0.085
(2.159)
0.024 (0.610)
0.050
(1.270)
0.205
(5.207)
SOIC-16
(NOMC-16, NOMCA-16, CSO-16, VSOR-16)
0.0160
MORN MSOP MO-187AA
(MORN-8)
0.0400
0.1700
0.0256
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 4Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Networks SOIC Medium Body 220 mils (TOMC Series)
Surface Mount Networks SOIC Wide Body 300 mils (WOMC Series)
SOIC-16 (TOMC)
0.080
(2.032)
0.024 (0.610)
0.050
(1.270)
0.275
(6.985)
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 5Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Networks High Density SSOP, TSOP (VSSR, VTSR Series)
0.016 (0.406)
0.070
(1.778)
0.070
(1.778)
0.070
(1.778)
0.025 (0.635)
0.224
(5.690)
0.224
(5.690)
0.224
(5.690)
OSOP-16, VSSR-16
SSOP MO-137
OSOP-20, VSSR-20 OSOP-24, VSSR-24, HD-CSO-24
0.014 (0.356) 0.014 (0.356) 0.014 (0.356)
0.070
(1.778)
0.070
(1.778)
0.070
(1.778)
0.0256 (0.650) 0.0256 (0.650) 0.0256 (0.650)
0.240
(6.096)
0.240
(6.096)
0.240
(6.096)
VTSR-16
TSSOP MO-153
VTSR-20 VTSR-24
0.016 (0.406) 0.016 (0.406)
0.025 (0.635) 0.025 (0.635)
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 6Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Leadless Networks (LCC Series)
Surface Mount Leadless Networks (MPH Series)
Surface Mount Leadless Packages DUAL/ QUAD Flat No Lead (DFN, QFN Series)
20 Pin LCC16 Pin LCC
0.0310
0.3410
0.0970
0.0310
0.0970
0.0500
0.0500
0.2831
0.1345
0.1298
4 Pin LCC
0.0575
0.2170
0.1220
0.0870
DFN-8 4 x 5 mm Sq
DFN MLP
0.0315 (0.800 )
0.014 (0.356)
0.1534
(3.896)
0.1063
(2.700)
0.0274 (0.696)
0.1378
(3.500)
QFN-20 5 x 5 mm Sq
QFN MLP
0.0256 (0.065)
0.1809
(4.595)
0.124
(3.150)
0.014 (0.356)
0.0274 (0.696)
Land Patterns
www.vishay.com Vishay Dale Thin Film
Revision: 11-Oct-17 7Document Number: 60119
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Leadless Resistor Arrays (PR Series)
Note
• All dimensions in inches (mm)
Flatpack
PR 100 (2 to 8 resistors) PR 135 (2 to 8 resistors)
PR 182 (2 to 8 resistors)
0.0533
0.0425
0.0463
0.0690
0.0425
0.0315
0.0400
0.0613
0.0440
0.0718
0.0648
0.0168
0.0240
14 Pin Bottom Brazed Flatpack
0.0850
16 Pin Bottom Brazed Flatpack
0.0850
0.0240
0.4000 0.4000
0.0500 0.0500
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED