For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
1
HMC1000LP5E
v00.0411
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Functional Diagram
The HMC1000LP5E is a MMIC band reject lter which
features a user selectable band rejection frequency.
The -20 dB lter bandwidth is < 10%. The rejection
frequency can be varied between 3.6 and 12.2 GHz by
applying an analog tune voltage between 0 and 14V.
This tunable lter can be used as a much smaller SMT
alternative to physically large switched lter banks
and cavity tuned lters. The HMC1000LP5E has
excellent microphonics due to the monolithic design,
and provides a dynamically adjustable solution in
advanced communications applications.
Typical Applications Features
General Description
The HMC1000LP5E is ideal for:
• Test & Measurement Equipment
• Military RADAR & EW/ECM
• SATCOM & Space
• Industrial & Medical Equipment
Tunable Stopband Frequency: 3.6-12.2 GHz
Tunable Stopband Rejection: 25 dB Typical
Four Frequency Control Modes
Single Chip Replacement For Mechanically Tuned
Designs
32 Lead 5 x 5 mm SMT Package
Electrical Specications, TA = +25 °C
Parameter Min. Ty p . Max. Units
Rejection Band Tuning Range 3.6 12.2 GHz
Passband Frequency Range 0.1-25 GHz
Stopband Rejection 25 dB
Passband Insertion Loss 3 dB
Return Loss (passband and rejection band) 15 dB
Rejection Band Input IP3 (Pin = + 10 dBm) 23.5 dBm
Passband Input IP3 (Pin = + 10 dBm) 35 dBm
Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 0V) 10 dBm
Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 7V) 13 dBm
Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 14V) >18 dBm
Frequency Control Voltage (Vfctl)014 V
Source/Sink Current (Ifctl)±1 mA
Residual Phase Noise [1] (100 kHz Offset) -162 dBc/Hz
Rejection Band, Fcenter Drift Rate -0.3 MHz/°C
Tuning Speed, Phase Settling to within 10° [2] < 200 ns
[1] Optimum residual phase noise performance requires the use of a low noise driver circuit.
[2] Tuning speed includes 40 ns typical tuning voltage ramp from driver.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
2
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Broadband Insertion Loss vs. Vt
Broadband Return Loss (S22) vs. Vt
Rejection Vs. Temperature
Broadband Return Loss (S11) vs. Vt
Rejection Band, Fcenter Vs. Temperature
Rejection Bandwidth Vs. Vt1 = Vt2
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
INSERTION LOSS (dB)
FREQUENCY (GHz)
0V 14V8V4V
-40
-30
-20
-10
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S11 0V
S11 7V
S11 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
-40
-30
-20
-10
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S22 0V
S22 7V
S22 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
2
4
6
8
10
12
14
0 2 4 6 8 10 12 14
+25C
+85C
-40C
REJECTION BAND, Fcenter (GHz)
Vt1 = Vt2 (Vdc)
20
25
30
35
40
45
50
0 2 4 6 8 10 12 14
+25C
+85C
-40C
REJECTION (dB)
Vt1 = Vt2 (Vdc)
0
5
10
15
20
25
30
35
40
45
50
0 2 4 6 8 10 12 14
- 10 dB BW
- 20 dB BW
BANDWIDTH (%)
Vt1 = Vt2 (Vdc)
Tuning Mode 1, Full Band Frequency Tuning, (Vt1 = Vt2 = 0-14V)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
3
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Broadband Insertion Loss vs. Vt Broadband return Loss (S11) vs. Vt
Rejection Band, Fcenter Vs. Temperature
Rejection Vs. Temperature Rejection Bandwidth Vs. Vt1
Broadband Return Loss (S22) vs. Vt
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
INSERTION LOSS (dB)
FREQUENCY (GHz)
0V
14V
8V
4V
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S11 0V
S11 7V
S11 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S22 0V
S22 7V
S22 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
2
3
4
5
6
7
8
0 2 4 6 8 10 12 14
+25C
+85C
-40C
REJECTION BAND, Fcenter (GHz)
Vt1 (Vdc)
20
25
30
35
40
45
50
0 2 4 6 8 10 12 14
+25C
+85C
-40C
REJECTION (dB)
Vt1 (Vdc)
0
5
10
15
20
25
30
35
40
0 2 4 6 8 10 12 14
- 10 dB BW
- 20 dB BW
BANDWIDTH (%)
Vt1 (Vdc)
Tuning Mode 2, Low Band Tuning With Narrower Rejection Bandwidth (Vt1 = 0-14V, Vt2 = 0V)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
4
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Broadband Insertion Loss vs. Vt
Broadband Return Loss (S22) vs. Vt Rejection Band, Fcenter Vs. Temperature
Rejection Bandwidth Vs. Vt2
Broadband return Loss (S11) vs. Vt
Rejection Vs. Temperature
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
INSERTION LOSS (dB)
FREQUENCY (GHz)
0V 14V8V4V
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S11 0V
S11 7V
S11 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S22 0V
S22 7V
S22 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
6
7
8
9
10
11
12
13
14
0 2 4 6 8 10 12 14
+25C
+85C
-40C
REJECTION BAND, Fcenter (GHz)
Vt2 (Vdc)
15
20
25
30
35
0 2 4 6 8 10 12 14
+25C
+85C
-40C
REJECTION (dB)
Vt2 (Vdc)
0
5
10
15
20
25
30
35
40
0 2 4 6 8 10 12 14
- 10 dB BW
- 20 dB BW
BANDWIDTH (%)
Vt2 (Vdc)
Tuning Mode 3, High Band Tuning With Narrower Rejection Bandwidth (Vt1 = 14V, Vt2 = 0-14V)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
5
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Tuning Mode 4, Rejection Bandwidth Tuning (Vt1 = 0V, Vt2 = 0-14V)
Broadband Insertion Loss vs. Vt Broadband Return Loss (S11) vs. Vt
Broadband return Loss (S22) vs. Vt
Rejection Bandwidth Vs. Temperature
Insertion Loss = - 10 dB
Rejection Vs. Temperature, Vt2 = 14V Tuning Sensitivity Vs. Vt
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
INSERTION LOSS (dB)
FREQUENCY (GHz)
0V
14V
8V
4V
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S11 0V
S11 7V
S11 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
S22 0V
S22 7V
S22 14V
RETURN LOSS (dB)
FREQUENCY (GHz)
1
2
3
4
5
6
7
8
9
10
01234567891011121314
+25C
+85C
-40C
BANDWIDTH (GHz)
Vt2 (Vdc)
-35
-30
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26
+25C
+85C
-40C
INSERTION LOSS (dB)
FREQUENCY (GHz)
0
200
400
600
800
1000
1200
1400
1600
1234567891011121314
Mode 1
Mode 2
Mode 3
Mode 4
SENSITIVITY (MHz/VOLT)
Vt (Vdc)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
6
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Rejection Band, Input IP3,
Pin = +10 dBm
Passband, Input IP3
Pin = +10 dBm
Passband, Residual Phase Noise
@ 4 GHz, Vt1 = Vt2 = 14V
10
15
20
25
30
35
40
45
50
0 2 4 6 8 10 12 14
+25C
+85C
-40C
INPUT IP3 (dBm)
Vt1 = Vt2 (Vdc)
20
25
30
35
40
45
50
55
0 2 4 6 8 10 12 14
2 GHz
18 GHz
24 GHz
INPUT IP3 (dBm)
Vt1 = Vt2 (Vdc)
Passband, Residual Phase Noise
@ 17 GHz, Vt1 = Vt2 = 0V
-180
-170
-160
-150
-140
-130
-120
1e+2 1e+3 1e+4 1e+5 1e+6 1e+7
+25C
+85C
-40C
RESIDUAL PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-180
-170
-160
-150
-140
-130
-120
1e+2 1e+3 1e+4 1e+5 1e+6 1e+7
+25C
+85C
-40C
RESIDUAL PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
Rejection Band, Insertion Phase vs. Pin Rejection Band, Fcenter vs. Pin
-25
-20
-15
-10
-5
0
5
10
15
20
25
0 2 4 6 8 10 12 14 16 18
VT1=Vt2=0V
Vt1=Vt2=7V
Vt1=Vt2=10V
Vt1=Vt2=14V
INSERTION PHASE (DEGREES)
INPUT POWER (dBm)
-80
-60
-40
-20
0
20
40
60
80
0 2 4 6 8 10 12 14 16 18
Vt1=Vt2=0V
Vt1=Vt2=7V
Vt1=Vt2=10V
Vt1=Vt2=14V
FREQUENCY (MHz)
INPUT POWER (dBm)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
7
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Absolute Maximum Ratings
Four Operation Modes And
The Control Conditions Reliability Information
Frequency Control Voltage (Vfctl) -0.5 to +15V
RF Power Input 28.5 dBm
Storage Temperature -65 to +150 °C
ESD Sensitivity (HBM) Class 1 A
Mode Vt1 Vt2 Description
I0 -14V
Vt1 = Vt2
0 -14V
Vt1 = Vt2 Full band frequency tuning
II 0 - 14V 0 V Low band frequency tuning, with
narrower rejection bandwidth
III 14V 0 - 14V High band frequency tuning, with
narrower rejection bandwidth
IV 0 V 0 - 14V Rejection bandwidth tuning
Junction Temperature to Maintain
1 Million Hour MTTF 150 °C
Nominal Junction Temperature
(T = 85 °C and Pin = 10 dBm) 86 °C
Thermal Resistance
(Junction To Ground Paddle) 40° C/W
Operating Temperature -40 to +85 °C
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
8
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. Pin BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
Pin BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC1000LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H1000
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reow temperature of 260 °C
Package Information
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
9
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Pin Descriptions
Application Circuit
Pin Number Function Description Interface Schematic
1-4, 7-11, 13, 15-18,
21-25, 27-32 N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
5, 20, 26 GND These pins and exposed paddle
must be connected to RF/DC ground.
6RFIN This pin is AC coupled and
matched to 50 Ohms.
12, 14 Vt1, Vt2 Center frequency control voltage.
19 RFOUT This pin is AC coupled and
matched to 50 Ohms.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FILTERS - TUNABLE - SMT
10
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohms impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB EVAL01-HMC1000LP5E [1]
Item Description
J1, J2 Connector, 2.9 mm, Jack
J3, J4, J5 DC Pin
U1 HMC1000LP5E, Band Reject Filter-
Tunable
PCB [2] 600-00121-00 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 25FR
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D