Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com June 2003
The Communications Edg e TM
AG302-63
InGaP HBT Gain Block Product Information
Product Features
• DC – 4000 MHz
• +13.5 dBm P1dB at 900 MHz
• +26.5 dBm OIP3 at 900 MHz
• 15.5 dB Gain at 900 MHz
• Single Voltage Supp ly
• SOT-363 SMT Package
• Internally matched to 50 Ω
Applications
• Mobile Infrastructure
• CATV / DBS
• W-LAN / ISM
• RFID
• Defense / Homeland Security
• Fixed Wi reless
Product Description
The AG302-63 is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 900 MHz, the AG302-63 typically provides
15.5 dB of gain, +26.5 dBm Output IP3, and +13.5 dBm
P1dB. The device combines dependable performance with
consistent quality to maintain MTTF values exceed ing 100
years at mounting temperatures of +85° C and is housed in
a SOT-363 industry-standard SMT package.
The AG302-63 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT technology process
technology and only requires DC-blocking capacitors, a
bias resistor, and an inductive RF choke for operation.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDM A, and W-CDMA. In addition,
the AG302-63 will work for other various applications
within the DC to 4 GHz frequency range such as CATV
and fixed wireless.
Functional Di agram
RF IN
GND
RF OUT
GND
GND
GND 1
2
3 4
6
5
Function Pin No.
Input 3
Output/Bias 6
Gro und 1, 2, 4, 5
Specifications
Parameter Units Min Typ Max
Frequency Range MHz DC 900 4000
Gain (900 MHz) dB 15.6
Gain (1900 MHz) dB 13.5 14.5 15.5
Input Return Loss dB 18
Output Return Loss dB 18
Output P1dB dBm +13.4
Output IP3 (2) dBm +26.4
Output IP2 dBm +37
Noise Figure dB 3.4
Device Voltage V 4.23
Device Current mA 35
Thermal Resistance °C / W 325
Junction Temperature (3) °C 177
Te s t conditio ns unless othe rwise noted.
1. T = 25º C, Supply Voltage = +5 V, Rbias = 22. 1 Ω, Frequency = 900 MHz, 50 Ω System.
2. 3OIP measured with two tones at an output power of -2 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. The junction temperature ensures a minimum MT TF rating of 1 millio n hours of usage.
Typical Performance
Parameter Units Typical
Frequency MHz 500 900 1900 2140
S21 dB 15.9 15.6 14.5 14.2
S11 dB -18 -18 -18 -18
S22 dB -20 -18 -18 -15
Output P1dB dBm +13.2 +13.4 +12.2 +11.7
Output IP3 dBm +26.6 +26.4 +24.8 +24.3
Noise Figure dB 3.3 3.4 3.6 3.6
Test conditions: T = 25º C, Supply Voltage = +5 V, Rbias = 22.1 Ω, 50 Ω System.
Absolute Maximum Rating Ordering I nformation
Parameter Rating Part No. Description
Operating Case Temperature -40 to +85 °C AG302-63 InGaP HBT Gain Block
Stor age Te mperat ure -55 to +125 °C AG302-63PCB 700 – 2400 MHz Fully Assembled Eval. Board
DC Voltage +5 V
RF Input Power (continuous) +10 dBm
Junction Temperature +250° C
Operation of this device above any of these parameter s may cause permanent da mage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com June 2003
The Communications Edg e TM
AG302-63
InGaP HBT Gain Block Product Information
Typical Device RF Performance
Supply Bias = +5 V, Rbias = 22.1 Ω
ΩΩ
Ω, Icc = 35 mA
Frequenc y MHz 100 500 900 1900 2140 2400 3500 5800
S21 dB 16.0 15.9 15.6 14.5 14.2 13.9 12.5 9.2
S11 dB -18 -18 -18 -18 -18 -18 -15 -11
S22 dB -20 -20 -18 -18 -15 -15 -14 -8
Output P1dB dBm +13.5 +13.2 +13.4 +12.2 +11.7 +11.6 +9.5
Output IP3 dBm +26.6 +26.6 +26.4 +24.8 +24.3 +23.9
Noise Figure dB 3.3 3.3 3.4 3.6 3.6 3.7
1. Test conditions: T = 25º C, Supply Voltage = +5 V, Device Voltage = 4.23 V, Rbias = 22.1 Ω, Icc = 35 mA typical, 50 Ω System.
2. 3OIP measured wit h two tones at an output power of -2 dBm/to ne separated by 10 MHz. The suppression on the largest I M3 product is used to calculate the 3OIP using a 2:1 rule.
3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by externa l compone nts s how n in the a pp lication c ircuit .
Gain vs. Frequency
6
8
10
12
14
16
01234
Frequency (GHz)
Gain (dB)
-40 C +25 C +85 C
Return Loss
-40
-30
-20
-10
0
0123456
Frequency (GHz)
S11, S22 (dB)
S11 S22
I-V Cu r v e
0
10
20
30
40
50
60
3.0 3.5 4.0 4.5
D evice Voltage (V)
Device Current (mA)
Op timal o p era ting p oin t
O utput IP3 vs. Freque ncy
10
15
20
25
30
00.511.522.53
Frequency (GH z)
OIP3 (dBm)
-40 C +25 C +85 C
O utput IP2 vs. Frequ ency
20
25
30
35
40
0 200 400 600 800 1000
Frequency (M Hz)
OIP2 (dBm)
-40c +25c +85c
Noise Figure vs. Frequency
0
1
2
3
4
5
0 0.5 1 1.5 2 2.5 3
Frequency (GHz)
NF
(
dB
)
-40 C +25 C +85 C
P1d B vs. Frequency
0
5
10
15
20
00.511.522.533.54
Frequency (GH z)
P1dB (dBm)
-40 C +25 C +85 C
Output Power / Gain vs. Input Power
frequency = 900 MHz
6
8
10
12
14
16
-20 -16 -12 -8 -4 0 4
Input Power (dBm)
Gain (dB)
-4
0
4
8
12
16
Out
p
ut Power
(
dBm
)
Outp u t Pow er
Gain
Output Power / Gain vs. Input Power
frequency = 2000 MHz
4
6
8
10
12
14
-20 -16 -12 -8 -4 0 4
Input Power (dBm)
Gain (dB)
-4
0
4
8
12
16
Out
p
ut Power
(
dBm
)
Outp u t Pow er
Gain
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com June 2003
The Communications Edg e TM
AG302-63
InGaP HBT Gain Block Product Information
Typical Device RF Performance (cont’d)
Supply Bias = +6 V, Rbias = 51 Ω
ΩΩ
Ω, Icc = 35 mA
Gain vs. Frequency
6
8
10
12
14
16
01234
Frequency (GHz)
Gain (dB)
-40 C +25 C +85 C
O utput IP3 vs. Frequency
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
Frequency (GH z)
OIP3 (dBm)
-40 C +25 C +8 5 C
O utput IP2 vs. Freque ncy
20
25
30
35
40
0 200 400 600 800 1000
Frequency (M Hz)
OIP2 (dBm)
-40c +25c +85c
P1d B vs. Frequency
0
5
10
15
20
00.511.522.533.54
Frequency (GH z)
P1dB (dBm)
-40 C +25 C +85 C
Noise Figure vs. Frequency
0
1
2
3
4
5
0 0.5 1 1.5 2 2.5 3
Frequency (GHz)
NF
(
dB
)
-40 C +25 C + 85 C
Typical Device RF Performance
Supply Bias = +8 V, Rbias = 108 Ω
ΩΩ
Ω, Icc = 35 mA
Gain vs. Frequency
6
8
10
12
14
16
01234
Frequency (GHz)
Gain (dB)
-40 C +25 C +85 C
O utput IP3 vs. Freque ncy
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
Frequency (GH z)
OIP3 (dBm)
-40 C +25 C +85 C
O utput IP2 vs. Freque ncy
20
25
30
35
40
0 200 400 600 800 1000
Frequency (M Hz)
OIP2 (dBm)
-40c +25c +85c
P1d B vs. Frequency
0
5
10
15
20
00.511.522.533.54
Frequency (GH z)
P1dB (dBm)
-40 C +25 C +85 C
Noise Figure vs. Frequency
0
1
2
3
4
5
0 0.5 1 1.5 2 2.5 3
Frequency (GHz)
NF
(
dB
)
-40 C +25 C + 85 C
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com June 2003
The Communications Edg e TM
AG302-63
InGaP HBT Gain Block Product Information
Application Circuit
Recommended Component Values
Reference Freq uency (MHz)
Designator 50 500 900 1900 2200 2500 3500
L1 820 nH 220 nH 68 nH 27 nH 22 nH 18 nH 15 nH
C1, C2, C4 .018 µF 1000 pF 100 pF 68 pF 68 pF 56 pF 39 pF
1. The proper values for the components are dependent upon the intended frequency of operation.
2. The following values are contained on the evaluation board to achieve optimal broadband performance:
Ref. Desig. Value / Type Size
L1 39 nH wirewound inductor 0603
C1, C2 56 pF chip capacitor 0603
C3 0.018 µF chip capacitor 0603
C4 Do Not Place
R1 22.1 Ω 1% tolerance 0805
Recommended Bias Resistor Values
Supply
Voltage R1 value Size
5 V 22.1 ohms 0603
6 V 51 ohms 0805
7 V 80 ohms 1206
8 V 10 8 ohms 1210
9 V 13 7 ohms 1210
10 V 166 ohms 1210
12 V 223 ohms 2010
The proper value for R1 is dependent upon the supply
voltage and allows for bias stability over temperature.
WJ recommends a minimum supply bias of +5 V. A
1% tolerance resistor is recommended.
C1
Blocking
Capacitor
RF OUT
L1
RF Choke
C3
0.018 µF
R1
Bias
Resistor
RF IN
C4
Bypass
Capacitor
C2
Blocking
Ca
p
acito
r
Vcc
Icc = 35 mA
AG302-63
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com June 2003
The Communications Edg e TM
AG302-63
InGaP HBT Gain Block Product Information
Outline Drawing
Land Pattern
Product Marking
The component will be marked with a “D”
designator followed by a two-digit numeric
lot code on the top surface of the package.
Tape and reel sp ecifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
ESD Rating: Class 0
Value: Passes at 150 V
Test: Human Body Model (HBM)
Standa rd: JEDEC Standard JE SD22-A114
ESD Rating: Class II
Value: Passes at 250 V
Test: Charged Device Model (CDM)
Standa rd: JEDEC St andard JE SD22-C101
MSL Ra ting: Level 1
Standard: JEDEC Standard J-STD-020A
Mounting Confi g. Notes
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com June 2003
The Communications Edg e TM
AG302-63
InGaP HBT Gain Block Product Information
Typical Device Data
S-Parameters (Vdevice = +4.23 V, ICC = 35 mA, T = 25° C, ca libr ated to device leads )
Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang)
50 -19.85 -177.05 15.79 177.89 -19.50 1.85 -22.57 -9.39
200 -20.39 172.44 15.71 172.31 -19.99 -0.03 -22.73 -15.90
400 -18.95 168.66 15.66 164.59 -20.17 0.39 -26.74 -50.08
600 -18.22 166.03 15.54 157.08 -19.88 -0.66 -25.19 -64.22
800 -18.39 160.37 15.44 149.77 -19.76 -1.68 -23.62 -86.11
1000 -18.40 155.28 15.23 142.64 -20.03 -5.40 -21.92 -97.33
1200 -18.39 153.16 15.05 135.22 -19.57 -2.69 -20.59 -111.56
1400 -18.59 149.91 14.87 128.43 -19.71 -3.14 -19.34 -118.43
1600 -18.76 150.09 14.61 121.52 -19.56 -3.55 -18.56 -127.47
1800 -19.47 149.34 14.35 114.94 -19.44 -3.76 -17.84 -135.63
2000 -19.53 143.58 14.09 108.45 -19.21 -4.88 -17.12 -142.08
2200 -20.36 111.55 13.83 102.12 -19.15 -3.98 -15.06 -128.29
2400 -20.74 117.89 13.58 96.07 -19.14 -6.05 -15.16 -138.31
2600 -20.03 119.10 13.43 91.90 -18.92 -9.37 -15.52 -146.95
2800 -19.88 127.04 13.14 85.95 -18.60 -8.35 -15.88 -158.46
3000 -19.28 129.86 12.90 79.66 -18.52 -7.78 -15.96 -175.61
3200 -17.86 131.98 12.60 74.00 -18.45 -9.35 -15.78 166.25
3400 -16.58 129.28 12.34 67.83 -18.48 -11.44 -14.80 151.04
3600 -15.33 126.05 12.03 61.86 -18.29 -15.20 -13.50 136.07
3800 -13.90 121.94 11.68 55.97 -18.27 -16.93 -12.16 125.22
4000 -12.67 119.37 11.34 49.91 -17.95 -17.17 -10.93 117.72
4200 -11.64 116.98 10.95 44.40 -17.80 -20.20 -9.79 110.52
4400 -10.94 113.30 10.58 39.19 -17.80 -21.20 -8.74 106.30
4600 -10.36 111.01 10.22 33.87 -17.65 -23.53 -8.11 103.95
4800 -10.13 108.79 9.92 29.20 -17.91 -25.48 -7.74 102.49
5000 -9.85 106.48 9.64 24.37 -17.45 -26.81 -7.45 102.33
5200 -10.16 105.84 9.40 20.36 -17.29 -29.16 -7.47 101.81
5400 -10.47 105.02 9.13 16.57 -16.96 -29.91 -7.69 102.58
5600 -10.90 104.58 9.03 12.70 -16.90 -30.12 -7.92 103.26
5800 -11.57 106.08 8.88 8.94 -16.81 -33.04 -8.35 104.47
6000 -12.41 105.88 8.77 4.74 -16.46 -33.40 -9.03 103.86
Device S-parameters are available for download off of t he websi te at: ht tp://www.wj.com
