search Home Buy Download Products Learning Reference Support Blog LOG INSIGN UP | Store :: Arduino :: Boards :: Arduino Ethernet Rev3 WITHOUT PoE CATEGORIES Currencies Currencies Languages Languages PRODUCT INFO Arduino (84) Accessories (25) Arduino Ethernet Rev3 WITHOUT PoE Code: A000068 Boards (23) Gift Edition (9) The Arduino Ethernet is a microcontroller board based on the Arduino Kits (6) Shields (21) Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB 2 Serial adapter or any FTDI-style Wearable (4) USB-to-serial connector can be used to program it. Workshops (1) TinkerKit (48) Additional features coming with the R3 version are: Components (67) - 1.0 pinout: added SDA and SCL pins for TWI communication placed VAT not included near to the AREF pin and two other new pins placed near to the Kits (13) RESET pin, the IOREF that allow the shields to adapt to the Books & Manuals (4) voltage provided from the board and the second one is a not VOLUME DISCOUNT PRICING connected pin, that is reserved for future purposes. New Products - stronger RESET circuit. Featured Products ... All Products ... A separate power-over-Ethernet (PoE) module can be soldered to the INFORMATION Official prices are in Euros, all the other board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available. currencies are provided as a reference. Technical Specifications Add to Cart: All prices are given 1 without VAT, VAT will Microcontroller ATmega328 be added on checkout. Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 4 provide PWM output) COMMENTS You must be logged in to post a comment. - Arduino Pins reserved - 10 to 13 used for SPI - 4 used for SD card - 2 W5100 interrupt (when bridged) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz W5100 TCP/IP Embedded Ethernet Controller Power Over Ethernet ready Magnetic Jack Micro SD card, with active voltage translators Arduino Ethernet Official Page SHIPPING & RETURNS | PRIVACY NOTICE | CONDITIONS OF USE | SELL | CONTACT US | DISCOUNT COUPONS | NEWSLETTER UNSUBSCRIBE (c) 2013 Arduino Store | Powered by Zen Cart