A000068 - ARDUINO - Datasheet.Live

VAT not included

VOLUME DISCOUNT PRICING

Add to Cart:

Arduino Ethernet Rev3 WITHOUT PoE

Code: A000068

The Arduino Ethernet is a microcontroller board based on the Arduino

Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet

Controller. It can be programmed like an Uno via a six-pin FTDI - style

serial connector. The Arduino USB 2 Serial adapter or any FTDI-style

USB-to-serial connector can be used to program it.

Additional features coming with the R3 version are:

1.0 pinout: added SDA and SCL pins for TWI communication placed

near to the AREF pin and two other new pins placed near to the

RESET pin, the IOREF that allow the shields to adapt to the

voltage provided from the board and the second one is a not

connected pin, that is reserved for future purposes.

stronger RESET circuit.

A separate power- over-Ethernet (PoE) module can be soldered to the

board to provide power from a conventional twisted pair Category 5

Ethernet cable. It is IEEE802.3af compliant, and works with all compliant

PoE injectors currently available.

Technical Specifications

Microcontroller ATmega328

LanguagesCurrencies

| Store :: Arduino :: Boards :: Arduino Ethernet Rev3 WITHOUT PoE

Featured Products ...

All Products ...

INFORMATION

Official prices are in

Euros, all the other

currencies are provided

as a reference.

All prices are given

without VAT, VAT will

PRODUCT INFO



Home DownloadProducts Reference Blog LOG INSIGN UPBuy Learning Support

Languages

Currencies

Operating Voltage 5V

Input Voltage

(recommended) 7-12V

Input Voltage (limits) 6-20V

Digital I/O Pins 14 (of which 4 provide PWM

output)

Arduino Pins reserved

10 to 13 used for SPI

4 used for SD card

2 W5100 interrupt (when bridged)

Analog Input Pins 6

DC Current per I/O Pin 40 mA

DC Current for 3.3V Pin 50 mA

Flash Memory 32 KB (ATmega328) of which 0.5

KB used by bootloader

SRAM 2 KB (ATmega328)

EEPROM 1 KB (ATmega328)

Clock Speed 16 MHz

W5100 TCP/IP Embedded

Ethernet Controller

Power Over Ethernet ready

Magnetic Jack

Micro SD card, with active

voltage translators

Arduino Ethernet Official Page

be added on checkout.

COMMENTS

You must be logged in to post a comment.