https://www.phoenixcontact.com/us/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Cutting machine, for cables, litz wires, and shrink sleeves, 230 V mains voltage Product Features The desired length and number is entered via the user-friendly display The drive and guide rolls automatically adjust to each inserted diameter The cutting machine cuts conductors, cables, and similar profiles No adjustments are required thanks to the automatic zero cut, which is performed when the start button is pressed To insert the conductors simply open the front cover Key commercial data Packing unit 11 Custom tariff number 84798997 Country of origin Germany Technical data Dimensions Length (b) 295 mm Height 230 mm Width (a) 195 mm General Note Cutting efficiency Power consumption 80 VA Maximum throughput 8 Cross section setting automatic Section length 2 ... 99999 Maximum number of cuts 999 Feed rate 0.5 m/s Host system interface RS-232 24.10.2013 Page 1 / 4 https://www.phoenixcontact.com/us/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Technical data General Dialog language German / English / French / Italian Classifications eCl@ss eCl@ss 4.0 21040302 eCl@ss 4.1 21040302 eCl@ss 5.0 21040302 eCl@ss 5.1 21040302 eCl@ss 6.0 21049011 eCl@ss 7.0 21049011 eCl@ss 8.0 21049011 ETIM ETIM 2.0 EC000142 ETIM 3.0 EC000142 ETIM 4.0 EC000142 ETIM 5.0 EC002778 UNSPSC UNSPSC 6.01 23171604 UNSPSC 7.0901 23171604 UNSPSC 11 23171604 UNSPSC 12.01 23171604 UNSPSC 13.2 23171604 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted 24.10.2013 Page 2 / 4 https://www.phoenixcontact.com/us/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Approvals Approval details GOST Accessories Accessories Cutting machine Replacement part - CUTFOX 10 C-UN - 1208393 Cable roller for CUTFOX 10 Replacement part - CUTFOX 10 R-C - 1208403 Replacement rotary table for cable roller Replacement part - CUTFOX 10 BAR - 1208416 Replacement holding arm for cable roller Cutting tools Cable-cutting tool - CF-10 WHEEL SET - 1207271 2 replacement rolls for CUTFOX 10 24.10.2013 Page 3 / 4 https://www.phoenixcontact.com/us/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Accessories Cable-cutting tool - CF-10 ABZH - 1207297 Accessories for crimping machine Cable-cutting tool - CF-10 FUSE 120V SET - 1207323 Accessories for crimping machine Cable-cutting tool - CF-10 FUSE 250V SET - 1207310 Accessories for crimping machine Knife Spare knife - CF-10 CUTTER KNIFE SET - 1207284 Replacement knife, for the CUTFOX 10 cutting machine (c) Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 24.10.2013 Page 4 / 4