DATA SHORT To request the full datasheet, please visit www.intersil.com/products/ISL1533 ISL1533 FN6464 Rev 3.00 October 12, 2015 Dual Channel Differential DSL Line Driver The ISL1533 is a dual channel differential amplifier designed for driving full rate ADSL2+ signals at very low power dissipation. The high drive capability of 450mA makes this driver ideal for DMT designs. It contains two pairs of wideband, high-voltage, current mode feedback amplifiers designed on Intersil's HS30 Bipolar SOI process for low power consumption in DSL systems. This process also provides for very rugged protection against lightning induced surges on the line. These drivers achieve an MTPR distortion measurement of better than 70dB, while consuming typically 5mA per DSL channel of total supply current in 1/2 IS mode. This supply current can be set using a resistor on the IADJ pin. Two other pins (C0 and C1) can also be used to adjust supply current to one of four preset modes (full-IS, 3/4-IS, 1/2-IS, and full power-down). The ISL1533 integrates 50k pull-up resistors on C0 and C1 pins to initially disable the device. The ISL1533 operates on 5V to 15V supplies and retains its bandwidth and linearity over the complete supply range. The device is supplied in a thermally-enhanced 20 Ld HTSSOP and the small footprint (4mmx5mm) 24 Ld QFN packages. The ISL1533 is specified for operation over the full -40C to +85C temperature range. Features * 450mA output drive capability * 44.4VP-P differential output drive into 100 * 5V to 15V supply operation * MTPR of -70dB * Operates down to supply current of 4mA per port * Current control pins * Channel separation - 80dB @ 500kHz * High ESD protection from lightning induced transients * Pb-free (RoHS compliant) * Surpasses GR1089, ANSI, and ETSI requirements Applications * Dual port ADSL2+ line drivers * HDSL line drivers Pinouts ISL1533IVEZ (20 LD HTSSOP) TOP VIEW 20 VOUTA 21 NC 22 VS- 23 C0AB 24 C1AB ISL1533IRZ (24 LD QFN) TOP VIEW VINA+ 1 19 VINA- VINB+ 2 18 VINB- GND 3 THERMAL PAD IADJ 4 13 VOUTD NC 12 VIND+ 7 NC 11 VINA+ 3 18 VINA- VINB+ 4 IADJ 6 14 VIND- VS+ 10 19 VOUTA 16 VOUTC VINC+ 6 C0CD 9 C1AB 2 GND 5 15 VINC- C1CD 8 20 VS- 17 VOUTB NC 5 THERMAL PAD TO BE CONNECTED TO GND FN6464 Rev 3.00 October 12, 2015 C0AB 1 THERMALO E PAD BL LA AI V VINC+ 7 R A E NG VIND+ LO 8 NO E RT 17 VINBO PP SU D R 16 VOUTB 15 VOUTC 14 VINC13 VIND- C1CD 9 12 VOUTD C0CD 10 11 VS+ THERMAL PAD TO BE CONNECTED TO GND Page 1 of 2 ISL1533 (c) Copyright Intersil Americas LLC 2007-2015. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN6464 Rev 3.00 October 12, 2015 Page 2 of 2