92502AS (KT)/71598HA (KT)/12696TS (KOTO) X-7235/3237KI/2225MW, TS No.1762-1/4
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
PNP/NPN Epitaxial Planar Silicon Transistors
Ultrahigh-Definition CRT Display
Video Output Applications
Ordering number:ENN1762B
2SA1403/2SC3597
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Electrical Characteristics at Ta = 25˚C
Package Dimensions
unit:mm
2009B
[2SA1403/2SC3597]
Applications
· Ultrahig-definition CRT display.
· Video output.
· Color TV chroma output.
· Wide-band amp.
Features
· High fT : fT typ=800MHz.
· Small reverse transfer capacitance and excellent
high-frequency characteristic
: Cre=2.9pF (NPN), 4.6pF (PNP).
· Complementary pair with the 2SA1403/2SC3597.
· Adoption of FBET procss.
( ) : 2SA1403
Specifications
Absolute Maximum Ratings at Ta = 25˚C
1 : Emitter
2 : Collector
3 : Base
SAN YO : TO-126
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
OBC 08)–(V
egatloVrettimE-ot-rotcelloCV
OEC 06)–(V
egatloVesaB-ot-rettimEV
OBE 4)–(V
tnerruCrotcelloCI
C005)–(Am
)esluP(tnerruCrotcelloCI
PC 1)–(A
noitapissiDrotcelloCP
C2.1W
01W
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
˚C
˚C
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
tnerruCffotuCrotcelloCI
OBC VBC I,V06)–(= E0=1.0)–(Aµ
tnerruCffotuCrettimEI
OBE V=BE I,V2)–( C0=1.0)–(Aµ
niaGtnerruCCD hEF 1V
EC I,V01)–(= CAm05)–(=*04*023
hEF 2V
EC I,V01)–(= CAm004)–(=02
tcudorPhtdiwdnaB-niaGf
TVEC I,V01)–(= CAm001)–(=008zHM
* : The 2SA1403/2SC3597 are classified by 50mA hFE as follows : Continued on next page.
knaRCDEF
hEF 08ot04021ot06002ot001023ot061
Tc=25˚C
8.04.0
7.011.0
1.5
15.5 3.0
1.6
0.80.8
0.6 0.5
2.7
4.8
2.4
1.2
123
3.0
No.1762-2/4
2SA1403/2SC3597
Continued from preceding page.
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
egatloVnoitarutaSrettimE-ot-rotcelloCV
)tas(EC ICI,Am001)–(= BAm01)–(= 6.0V
)8.0–(V
egatloVnoitarutaSrettimE-ot-esaBV
)tas(EB ICI,Am001)–(= BAm01)–(=0.1)–(V
egatloVnwodkaerBesaB-ot-rotcelloCV
OBC)RB( ICI,Aµ01)–(= E0=08)–(V
egatloVnwodkaerBrettimE-ot-rotcelloCV
OEC)RB( ICR,Am1)–(= EB =∞06)–(V
egatoVnwodkaerBesaB-ot-rettimEV
OBE)RB( IEI,Aµ001)–(= C0=4)–(V
ecnaticapaCtuptuOC
bo VBC zHM1=f,V03)–(= 4.3Fp
)2.5(Fp
ecnaticapaCrefsnarTesreveRC
er VBC zHM1=f,V03)–(= 9.2Fp
)6.4(Fp
ITR03428
IC -- VCE
0--4--8--12 --16 --20
0
--40
--80
--120
--160
--200
IB=0
ITR03429
IC -- VCE
2012 16480
0
40
80
120
160
200
2SA1403
IB=0
2SC3597
--1.8mA
--1.4mA
--1.2mA
--1.0mA
--0.8mA
--0.6mA
--0.4mA
--0.2mA
--1.6mA
1.8mA
1.6mA
1.4mA
ITR03430
IC -- VBE
0--0.2 --0.4 --0.6 --0.8 --1.0 --1.2
0
--200
--100
--300
--400
--500
--600 2SA1403
VCE= --10V
ITR03431
IC -- VBE
0 0.2 0.4 0.6 0.8 1.0 1.2
0
200
100
300
400
500
600 2SC3597
VCE=10V
1.2mA
1.0mA
0.8mA
0.6mA
0.4mA
0.2mA
Collector Current, IC–mA
Collector-to-Emitter Voltage, VCE –V
Collector Current, IC–mA
Collector-to-Emitter Voltage, VCE –V
Collector Current, IC–mA
Base-to-Emitter Voltage, VBE –V
Collector Current, IC–mA
Base-to-Emitter Voltage, VBE –V
100
10
ITR03432
hFE -- IChFE -- IC
235757 7
3
25
--
100
--
10
--
1000
2
3
5
7
7
2
3
510 357 7 723 5 100 1000
52
7
10
5
100
7
5
3
2
3
2
ITR03433
2SA1403
VCE= --10V 2SC3597
VCE=10V
DC Current Gain, hFE
Collector Current, IC–mA
DC Current Gain, hFE
Collector Current, IC–mA
No.1762-3/4
2SA1403/2SC3597
357
--
10 7
--
100 7
--
1000
53522
7
1000
100
5
7
5
3
2
2
ITR03434
fT -- IC
2SA1403
VCE= --10V
35710 7100 71000
53522
7
100
5
2
2
7
1000
5
3
ITR03435
fT -- IC
2SC3597
VCE=10V
7
--
10 27
--
100
3
--
1.0 23 5557
1.0
7
10
5
7
5
3
5
3
2
2
ITR03436
Cob -- VCB
2SA1403
f=1MHz 2SC3597
f=1MHz
710 27
100
3
1.0 23 5557
1.0
7
10
5
7
5
3
5
3
2
2
ITR03437
Cob -- VCB
7
--
10 27
--
100
3
--
1.0 23 5557
1.0
7
10
5
7
5
3
5
3
2
2
ITR03438
Cre -- VCB
2SA1403
VCE= --10V 2SC3597
f=1MHz
710 27
100
3
1.0 23 5557
1.0
7
10
5
7
5
3
5
3
2
2
ITR03439
Cre -- VCB
Gain-Bandwidth Product, fT–MHz
Collector Current, IC–mA
Gain-Bandwidth Product, fT–MHz
Collector Current, IC–mA
Output Capacitance, Cob – pF
Collector-to-Base Voltage, VCB -- V
Output Capacitance, Cob – pF
Collector-to-Base Voltage, VCB -- V
Reverse Transfer Capacitance, Cre – pF
Collector-to-Base Voltage, VCB -- V
Reverse Transfer Capacitance, Cre – pF
Collector-to-Base Voltage, VCB -- V
ITR03440
VCE(sat) -- IC
557
--
100 2
--
10 23
35
7
--
0.1
--
1.0
5
3
3
5
7
7
--
10
5
3
7
2
2
2SA1403
IC / IB=10
ITR03441
VCE(sat) -- IC
557 100 2
10 2335771000
0.1
7
1.0
5
7
3
10
5
7
3
3
5
2
2
2SC3597
IC / IB=10
Collector Current, IC–mA
Collector-to-Emitter
Saturation Voltage, VCE(sat) – V
Collector Current, IC–mA
Collector-to-Emitter
Saturation Voltage, VCE(sat) – V
PS No.1762-4/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 2002. Specifications and information herein are
subject to change without notice.
2SA1403/2SC3597
0 20 40 60 80 100 120 140 160
0
2
8
10
12
4
6
PC -- Tc
ITR03444
ITR03442
A S O
DC operation
Tc=25°C
10ms
1ms
10
3
5
7
2
2
3
5
233 57
57 100
100
10
7
2
1000
ICP=1A
IC=500mA
2SA1403 / 2SC3597
2SA1403 / 2SC3597
0 20 40 60 80 100 120 140 160
0
0.2
0.6
0.4
1.2
1.4
0.8
1.0
PC -- Ta
ITR03443
2SA1403 / 2SC3597
No heat sink
For PNP, minus sign is omitted.
Collector-to-Emitter Voltage, VCE –V
Collector Current, IC–mA
Collector Dissipation, PC–W
Ambient Temperature, Ta – ˚C
Collector Dissipation, PC–W
Case Temperature, Tc – ˚C
