PANEL SWITCHES 8 -1 L -K ) R1 ( 01 KL series SW Locking power rocker switches DISTINCTIVE FEATURES One protected position Patented intuitive ergonomics Laser etched symbols Illuminated or non-illuminated Optionally sealed to IP69K ENVIRONMENTAL SPECIFICATIONS * Sealing options : K : IP68 to front panel components of switch only according to IEC 60529 Z : IP69K panel sealing according to DIN 40050-9 * Salt spray resistance : 96 hours according to IEC 512-6, test 11f * Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS * Currrent/voltage rating with resistive load : - Silver plated contacts : A : 5 A 24 VDC, 100,000 cycles 10 A 24 VDC, 10,000 cycles (terminals 6.35 x 0.8 only) S : 20 A 12 V, 10,000 cycles (see "Build your part number") - Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles * Initial contact resistance : 10 m max. * Insulation resistance : 1,000 M min. at 500 VDC * Dielectric strength : 2,000 Vrms 50 Hz min. between terminals * Mechanical life : 150,000 cycles min. GENERAL SPECIFICATIONS * Mechanical life : 150,000 cycles min. * Panel thickness : 0.8 mm to 4.6 mm * Recommended panel thickness : between 2 mm and 3.5 mm The company reserves the right to change specifications without notice. 1 Locking power rocker switches PANEL CUT-OUT MATERIALS * Case : PA 6-6 21.08 0/+0.3 (.830 0/+.012) * Actuator : ABS * Unlocking actuator : ABS or elastomeric membrane 36.80 0/+0.3 (1.449 0/+.012) * Bezel : PA 6-6 * Contacts & terminals : brass, solid silver grain, silver plated (A or S) or brass, solid silver grain, gold plated (D) * Contact roller : brass, nickel plated APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. CKRDE3-C SEALING * Sealing is optional. To order a sealed product, complete the appropriate box of ordering format on the following pages. SPECIFIC MATRIX MOUNTING FOR Z VERSION MATRIX MOUNTING 4.00 (.157) 25.00 mini (.984 min.) 6.00 (.236) 27.00 mini (1.063 min.) 47.00 mini (1.850 min.) 48.50 m (1.909 m 11.7 (.46 10.20 (.402) ON ON ON ON 6.00 27.00 mini (1.063 min.) FICHIER: CKLDE-P11 (.236) 47.00 mini (1.850 min.) CKLDE1-A ECHELLE: 0.625 indice A le 18/03/08 10.20 (.402) 2 48.50 mini (1.909 min.) 11.70 (.460) ON ON ON PANEL SWITCHES KL series PANEL SWITCHES KL series Locking power rocker switches ELECTRICAL FUNCTIONS AND CONNECTIONS In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented. For single pole models, only terminals 1, 2 and 3 are to be considered (not 6, 5, 4). x = w/o terminal o = with terminal = momentary 2 POSITIONS 33 22 3 POSITIONS 11 3 2 1 33 CKLFUN1-A CKLFUN1-A 33 22 11 3 2 1 22 11 3 2 1 33 22 11 3 332 221 CKLFUN1-A 33 22 11 3 323 212 CKLFUN2-A CKLFUN2-A 11 3 2 1 3 2 1 3 2 1 CKLFUN2-A 3 33 2 22 1 11 11 11 3 332 221 11 33 22 33 22 11 3 332 CKLFUN2-A 22 1 CKLFUN2-A 11 3 332 221CKLFUN2-A 11 3 2 1 66 55 44 6 665 554 44 6 665 554 44 6 5 4 332 221 Press unlocking actuator to unlock. 33 22 11 3 2 CKLFUN1-A 1 CKLFUN1-A 33 22CKLFUN1-A 11 3 2 1 66 55 44 6 5 4 66 55 44 6 5 4 33 22 511 Function KL35 33 - KL45 22 11 3 2 1 33 22 11 3 2 1 2 5 1 4 33 66 22 55 11 44 3 6 2 5 1 4 Function 1 * KL31-KL41 66 55 44 3 6 66 55 44 6 5 4 66 55 44 6 5 4 33 22 11 3 2 1 33 22 11 3 2 1 Function 6 KL36-KL46 33 22 11 66 55 44 3 6 2 5 1 4 33 66 22 55 11 44 3 6 2 5 1 4 66 55 44 6 5 4 66 55 44 6 5 4 * Function 1 : Only available for 6 terminal versions, illuminated versions only available with "A" wiring. 33 22 11 3 2 1 33 22 11 3 2 1 66 55 44 6 5 4 66 55 44 6 5 4 CKLFUN156-B CKLFUN156-B TERMINALS CKLFUN156-B CKLFUN156-B 6.35 (.25) Screw 0.80 (.031) 4.50 (.177) O3.00x0.50 SI (.118DIAx0.50 IS) CKLFUN156-B Function 7 KL37-KL47 Function 8 KL38-KL48 Function 9 KL39-KL49 Function 4 KL44 Function 4-1R KL44-1R 33 22 11 3 11 3 332 221 11 3 2 1 33 66 22 55 11 44 3 33 2 22 1 11 6 665 554 44 3 6 33 2 665 22 1 554 11 44 3 6 2 5 1 4 66 55 44 6 66 5 55 4 44 6 66 5 55 4 44 6 5 4 33 22 11 3 11 3 332 221 11 3 2 1 33 66 22 55 11 44 3 33 2 22 1 11 6 665 554 44 332 3 6 33 2 665 22 1 554 11 44 3 6 2 5 1 4 66 55 44 6 66 5 55 4 44 6 66 5 55 4 44 6 5 4 33 22 11 3 11 3 332 221 11 3 2 1 33 66 22 55 11 44 3 33 2 22 1 11 6 665 554 44 3 6 33 2 665 22 1 554 11 44 3 6 2 5 1 4 66 55 44 6 66 5 55 4 44 6 66 5 55 4 44 6 5 4 33 22 11 3 11 3 332 221 11 3 2 1 33 66 22 55 11 44 3 33 2 22 1 11 6 665 554 44 3 6 33 2 665 22 1 554 11 44 3 6 2 5 1 4 66 55 44 6 66 5 55 4 44 6 66 5 55 4 44 6 5 4 33 22 11 3 33 2 22 1 11 3 33 2 22 1 11 CKLFUN7894-A CKLFUN7894-A 3 2 1 CKLFUN7894-A 66 55 44 6 66 5 55 4 44 6 66 5 6 332 332 221 221 221 CKLFUN156-B O3.10 (.122DIA) O &+# 6.35x0.80 (.25x.031) Z Z Solder lug / quick-connect Normalized quick-connect 6.35x0.8 55 4 44 5 4 O1.20 (.047DIA) CKLFUN7894-A CKLFUN7894-A 2.80x0.80 (.110x.031) CKLFUN7894-A Normalized quick-connect 2.8x0.8 FICHIER: FICHIER:CKLFUN-P4 CKLFUN-P4 FICHIER: CKLFUN-P4 ECHELLE: ECHELLE:0.45 0.45 ECHELLE: 0.45 3 PANEL SWITCHES KL series Locking power rocker switches BUILD YOUR PART NUMBER To order a complete product, fill in all the boxes of the following order guide. CASE + LEDS KL Side B CONTACTS 1 ON - OFF A Silver X No 4 ON ON ON D K IP68 X None F LED 12 V yellow 4-1R ON ON MOM Gold plated S Silver 20 A*** Z IP69K A LED 6 V red N LED 12 V blue B LED 6 V green S LED 12 V white POLES 3 Single pole 4 Double pole WIRING ELECTRICAL FUNCTIONS SERIES SEALING 5 MOM - ON 6 ON - ON C LED 6 V yellow J LED 24 V red 7 MOM OFF MOM M LED 6 V blue K LED 24 V green 8 ON OFF MOM R LED 6 V white L LED 24 V yellow 9 ON OFF ON D LED 12 V red P LED 24 V blue E LED 12 V green T LED 24 V white Function 1 only for 6-terminal versions. Functions 5 and 6 cannot be combined with "H" wiring. TERMINALS Screw 0 Solder lug/quick-connect 6 terminals with barrier See following pages. LEDS 2 6 terminals with barrier 4 6 terminals w/o barrier A 10 term. with barrier B 10 term. w/o barrier C 10 terminals for use with connector U2292 etc. Normalized quick-connect 6.35x0.8 Normalized quick-connect 2.8x0.8 3 6 terminals with barrier G 10 term. with barrier 5 6 terminals w/o barrier H 10 term. w/o barrier D 10 term. with barrier J E 10 term. w/o barrier 10 terminals for use with connector U2282 F *** S contacts for all functions except 5 and 4-1R - for normalized quick-connect terminals 6.35x0.8 only. 10 term. for use with connector U2292 or U3152 ACTUATOR ON 4 Area A Area B 5 OFF 6 1 2 3 CKLMA1-A TYPE 1 2 UNLOCKING ACTUATOR COLOR Hard plastic (ABS) For nonilluminated application 1 Blue Yellow Y 6 Red R Red 2 Black 7 Ivory G Green 3 Green 9 Orange 4 Grey ROCKER COLOR 1/4 2 Blue 3 Green 6 Red Dark blue 4 Grey 7 Ivory Black 5 Yellow 9 Orange A 1 B 3 5 Blank 2 6 FICHIER: CKLMA-P3 ECHELLE: 0.625 indice A le 18/03/08 MARKING ORIENTATION ON N 5 1 2 OFF 6 3 CKLMA1-A Symbols & Accessories : see end of the series. A NOTICE : please note that not all combinations of above numbers are available. Refer to following pages for further information. 4 4 1 5 6 2 B 3 White Non-illuminated CKLMA2-A 4 1 MARKING COLOR Illuminated models 4 Yellow Dark blue 1/4 For illuminated application 5 Elastomer SYMBOLS 1 Blue 2 Black 3 Green 4 Grey 5 Yellow 6 Red 7 White 9 Orange Locking power rocker switches FLAT SEAL KL31 Double pole 47.00 (1.850) 1-2 4-5 KL41 ON - KL44* ON ON ON KL44-1R* ON ON MOM 25.00 (.984) 26.40 (1.039) Single pole 2-3 5-6 OFF KL35 KL45 MOM KL36 KL46 ON KL37 KL47 MOM OFF MOM KL38 KL48 ON OFF MOM KL39 KL49 ON OFF ON - ON - ON 35.50 (1.398) 6 TERMINAL VERSION 11.00 (.433) *Function 4 : single pole in double pole case FLAT SEAL Single pole Double pole KL31 KL41 ON - KL44* ON ON ON KL44-1R* ON ON MOM CKL49DT6S 25.00 (.984) 47.00 (1.850) 1-2 4-5 26.40 (1.039) 2-3 5-6 OFF KL35 KL45 MOM - KL36 KL46 ON - KL37 KL47 MOM OFF MOM KL38 KL48 ON OFF MOM KL39 KL49 ON OFF ON ON 35.50 (1.398) ON 50.00 Max (1.969 Max) 10 TERMINAL VERSION 11.00 (.433) *Function 4 : single pole in double pole case U2282 CKL49DT10S CASE + LEDS TERMINALS BASIC P/N ACTUATOR SCREW 6 terminals with barrier 2 4 A B C 6 terminals with barrier 6 terminals w/o barrier 10 terminals with barrier 10 terminals w/o barrier 10 terminals for use with connector U2292 or U3152 O3.00x0.50 SI (.118DIAx0.50 IS) 6.35 (.25) screw 0.80 (.031) O3.10 (.122DIA) 4.50 (.177) 0 SOLDER LUG / QUICK-CONNECT 6.35x0.80 (.25x.031) Solder lug / quick-connect 5 PANEL SWITCHES KL series Locking power rocker switches CASE + LEDS TERMINALS (CONTINUED) BASIC P/N ACTUATOR NORMALIZED QUICK-CONNECT 6.35X0.8 NORMALIZED QUICK-CONNECT 2.8X0.8 3 6 terminals with barrier 5 6 terminals w/o barrier D 10 terminals with barrier E 10 terminals w/o barrier F 10 terminals for use with connector U2292 or U3152 G H J 10 terminals with barrier 10 terminals w/o barrier 10 terminals for use with connector U2282 O &+# O1.20 (.047DIA) 2.80x0.80 (.110x.031) Z Z Normalized quick-connect 6.35x0.8 Normalized quick-connect 2.8x0.8 6 7.10 (.280) 3 5 2 5.85 (.230) 11.30 (.445) 7.10 (.280) 9.10 (.358) 11.30 (.445) 9.10 (.358) 6 3 4 5 2 1 5.85 (.230) 6.85 (.269) 11.30 (.445) 11.30 (.445) 6.85 (.269) 10 TERMINAL VERSION 4 6 TERMINAL VERSION 1 PANEL SWITCHES KL series CKLCO-A CKLCO-A Terminals are marked on the case. The drawings show the maximum possible number of terminals. CASE + LEDS BASIC P/N A D S 6 FICHIER: CKLCO-P5 ECHELLE: 0.625 indice A le 18/03/08 CONTACT MATERIALS FICHIER: CKLCO-P5 ECHELLE: 0.625 indice A le 18/03/08 ACTUATOR Silver Silver, gold plated Silver 20A. For all functions except 4 and 4-1R - for normalized quick-connect terminals 6.35x0.8 only. Locking power rocker switches CASE + LEDS SEALING BASIC P/N X K Z ACTUATOR No sealing IP68 (front panel components of switch only) IP69K - Installation notice available on request Ultrasonic welding of frame to case is standard on all versions. The ultrasonic welding and the optional panel seal prevent water and dust from introducing into the switch housing. CASE + LEDS optional seal optional seal K Z LEDS Side B BASIC P/N ACTUATOR Complete enlarged box with one of the codes listed below. X Without LED Red Green Yellow Blue White Amber Red/green 7 8 7 8 4 1 4 1 5 2 5 2 3 6 3 10 9 10 6 VDC A B C M R 4 1 6 12 VDC D E F N S 5 2 9 24 VDC J K L P T 6 3 No resistor U V W Y Z 9 8 Side B CKLIL-A LED consumption : 20 mA @ nominal voltage (25 C / 77 F) Other illumination solutions : on request. FICHIER: CKLIL-P6 ECHELLE: 0.625 For non-stabilized on-board power supplies submitted to potential voltage surges due to the indice alternator, 15 V and 30 V A le 18/03/08 LED configurations are also available on request. LED Tolerance 10 % CASE + LEDS WIRING BASIC P/N ACTUATOR The LED wiring diagram is shown on the case. FOR 6 TERMINAL VERSIONS - LED CONNECTED TO THE LOAD 1 1 4 2 5 3 6 + A standard 4 2 5 3 6 CKLRLA-A + - - 1 4 1 + 2 5 2 5 3 6 3 6 B CKLRLB-A 1 4 C CKLRLC-A - 4 2 5 3 6 E CKLRLE-B - + - 1 4 2 5 3 6 + F CKLRLF-A Note : If not available, terminals are added to connect the LED. 7 PANEL SWITCHES KL series PANEL SWITCHES KL series Locking power rocker switches 1 CASE + LEDS 1 4 2 5 3 6 4 5 2 + + - 6 WIRING 3 CKLRLA-A G + 1 1 4 2 5 2 5 3 6 3 6 - 1 4 + 1 4 + Standard, to have independent LED. ACTUATOR CKLRLC-A CKLRLB-A FOR 10 TERMINAL VERSIONS - INDEPENDENT LED OR INTEGRATED FUNCTIONS 4 4 1 4 1 4 - - 1 4 5 5 2 6 3 CKLRLB-A I To haveCKLRLA-A a polarity inversion (typical application : fanCKLRLC-A motor). 9 10 + Dotted line = external wiring Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6. CKLRLG-A Available with H and J quick-connect terminals. CKLRLE-B CKLRLF-A Please contact us for other wiring solutions. + + 7 8 7 4 1 4 1 4 2 5 2 5 2 5 3 6 3 6 3 6 10 9 10 9 7 1 - G - 4 5 CASE + LEDS 6 3 R2 9 - For non-illuminated application For CKLRLH-A illuminated application ACTUATOR BASIC P/N 1 1/4 2 3 4 5 6 7 9 ROCKER COLOR CASE + LEDS Blue Dark blue Black Green Grey Yellow Red Ivory Orange Note : color 7 not available on illuminated versions 8 9 ACTUATOR TYPE 7 1 1 2 R2 H R1 2 10 10 CKLRLH-A CKLRLG-A BASIC P/N R1 8 8 ACTUATOR + 8 2 5 3 6 CKLRLE-B 5 5 5 5 5 2 2 2 2 H To obtain 2 symbol illumination2 levels (night illumination when OFF and higher illumination when ON). 7 + line + + Dotted = 6external wiring,- continuous line8 = internal wiring 6 6 6 6 6 3 3 3 3 3 3 4 1 Available in Single Pole only, with H and J quick-connect terminals 2 4 (CONTINUED) BASIC P/N 1 - 1 CKLRL-P7 indice B 23.07.08 ECH 1 I CKRRLI-A CKLRL-P7 indice B 23.07.08 ECH 1 - + Locking power rocker switches ACTUATOR UNLOCKING ACTUATOR BASIC P/N CASE + LEDS HARD PLASTIC (ABS) 1 1/4 2 3 4 ELASTOMER 5 6 7 9 Blue Dark blue Black Green Grey Yellow Red Ivory Orange ACTUATOR Y R G Yellow Red Green MARKING ORIENTATION BASIC P/N CASE + LEDS ON 4 5 If no marking required, complete the box with code N. Other orientations : on request 1 N 2 ON 4 OFF 6 5 ACTUATOR XX 5 SYMBOLS A 1 3 CKLMA1-A BASIC4 P/N PANEL SWITCHES KL series 2 OFF 6 CKLMA1-A B A 1CASE + LEDS 3 No symbol2 Available symbols 6 3 Complete each box with the one of the codes listed on the B enlarged following pages. A 4 5 Laser etching resistance CKLMA2-A - Water and petrol resistant acccording to EN61058-1 FICHIER: CKLMA-P3 - Tear resistant (cross-cut test) according to NF ISO 2409 : class 0 ECHELLE: 0.625 indice - UV resistant according to AISO 4892-2 1 2 B 6 3 le 18/03/08 Marking area The symbol will be included in the hatched area. FICHIER: CKLMA-P3 ECHELLE: 0.625 indice A le 18/03/08 3.90 (.154) 13.20 (.520) 5.30 (.209) 3.90 (.154) 5.30 (.209) 13.20 (.520) CKLMA2-A 6.40 (.252) 13.70 (.539) For non-illuminated versions 13.70 (.539) For illuminated versions 14.00 (.551) 14.00 (.551) CKLZL1-A FICHIER: CKLZL-P9 CKLZL2-A 9 PANEL SWITCHES KL series Locking power rocker switches ACTUATOR BASIC P/N MARKING COLOR CASE + LEDS ILLUMINATED MODELS - LASER ETCHING NON-ILLUMINATED MODELS - PAD PRINTING Blank 1 2 3 4 5 6 7 9 10 White Blue Black Green Grey Yellow Red White Orange PANEL SWITCHES K range Power rocker switches and indicators * symbols and accessories Most symbols meet the ISO 7000 standard "graphical symbols for use on equipment" (code given in bracket in the description). Contact us for symbols not featured in the following tables. CODE SYMBOL XX None DESCRIPTION CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION - 16 Revolving light 32 Emergency first aid vehicle (2565) 01 - 17 Rear ventilator 33 Load tipping (1557) 02 - 18 Heating (0637) 34 Loading light (2457) 03 - 19 Door opening 35 Tractor, rear-ward (1667) 04 - 20 Windshield demister/ defroster (0635) 36 Combine, direction of movement (1678) 05 - 21 Windshield wiper (0086) 37 Use no forks (2406) 06 - 22 Windshield washer (0088) 38 Transmission (1166) 07 Stop 23 Ventilator fan (0089) 39 Working spot light (1145) 08 Motion 24 Side mirror defroster 40 Engine (0640) 09 Up motion 25 Restarting pump 41 Horn (0244) 10 Down motion 26 Front fog lights (0633) 42 Lock (1656) 11 Hot 27 Rear fog lights (0634) 43 Taxi sign light (2551) 12 Cold 28 Propulsion system trim 44 Working light (1204) 13 Hazard warning (0085) 29 Beacon (1141) 45 Working light symmetric (1204) 14 Traveller lighting 30 Anchor 46 - 15 Driver lighting (1421 ) 31 Electric motor (0011) 47 - The company reserves the right to change specifications without notice. 1 PANEL SWITCHES K range Power rocker switches and indicators * symbols and accessories CODE 2 SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION 48 All wheel drive 69 Engine idle control 90 ECAS reset 49 Differential lock (1662) 70 Cruise res/set 91 Driver windows heating 50 - 71 Driver windows up/ down 92 Cruise set 51 - 72 Middle door opening 93 Air bag up/down 52 - 73 Front door opening 94 Read lighting 53 - 74 Lighting in baggage room 95 Lighting main switch 54 Rear window wiper (0097) 75 Cruise on/off 96 Heating using water 55 Rear window washer (0099) 76 TV 97 Low beam 56 Lower load (2223) 77 Pump 98 Position lights 57 Cab lock (1560) 78 Toilet 99 Diesel acceleration 58 Extraction 79 Toilet decontamination A1 Manual mode 59 Pumping in 80 Front windshield heating A2 Clockwise cabin rotation 60 Rear PTO (1572) 81 Aus A3 Anticlockwise cabin rotation 61 Front PTO 82 Radiator fan A4 - 62 Rockshaft down 83 Remove retarder A5 - 63 Rockshaft up 84 Restricted speed A6 64 Indicator 85 Preheater A7 - 65 Brake release 86 ABS detection A8 - 66 Baggage room left door 87 ECAS detection A9 - 67 Baggage room right door 88 Engine stop AA - 68 Power blinds 89 Cruise res/cancel AB - Parking brake Power rocker switches and indicators * symbols and accessories CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION AC - AV - AD - AW - AE - AY - AF - AZ - AG Battery charging condition (0247) B1 - AH Turn signals (0084) B2 - AJ High beam (0082) B3 - AK Differential lock, bogie (2600) AL Brushing with a rotating brush (0070) AM Differential lock, transfer case 4x4 (2475) AN Loader bucket, float (1441) AP Loader bucket (1437) AQ Rear window washer & wiper (0098) AR Header, Header drive (1579) AS Excavator/backhoe boom side shift (2091) AT Chemical water treatment (1851) AU Legend scale Depending on space available on the product (see "Symbols" section at the end of each series). Grapple skidder, single funct boom (1762) 3 PANEL SWITCHES K range Power rocker switches and indicators * symbols and accessories MOUNTING PANELS (NOT AVAILABLE FOR USE WITH THE KH SERIES) MOUNTING PANEL END SINGLE MOUNTING PANEL 56.00 (2.205) 56.00 (2.205) MOUNTING PANEL MIDDLE 56.00 (2.205) 3.80 (.150) 3.80 (.150) 29.26 (1.152) 26.50 (1.043) U2261 26.50 (1.043) U2262 CKRU2261-C 3.80 (.150) 26.26 (1.034) 32.26 (1.270) 26.50 (1.043) U2267 CKRU2262-C Recommended panel thickness : 1.10 mm - 1.80 mm - 2.60 mm - 3.40 mm - 4.20 mm - 5 mm - 5.80 mm MOUNTING PANEL CUT-OUT 25.00 0/+0.20 (.984 0/+.008) 51.00 0/+0.20 (2.008 0/+.008) 77.50 0/+0.20 (3.051 0/+.008) For 1 element U2267 4 48.20 0/+0.20 (1.898 0/+.008) 48.20 0/+0.20 (1.898 0/+.008) For additional elements, add 26.40 mm (1.039) 48.20 0/+0.20 (1.898 0/+.008) PANEL SWITCHES K range For 2 elements U2261 CKRDE2-C For 3 elements (2xU2261 + 1x U2262) 25.00 (.984) 19.00 (.748) K range CKRAD-1 Power rocker switches and indicators * symbols and accessories 3.50 (.138) PANEL SWITCHES 50.00 (1.969) 50.00 (1.969) 3.50 (.138) 22 X 44 ADAPTERS FRONT PANEL DISMOUNTING REAR PANEL DISMOUNTING PANEL CUT-OUT 19.00 3.50 (.748) (.138) 25.00 (.984) U3060 25.00 (.984) CKRAD-1 3.50 (.138) 44.00 0/+0.1 (1.732 0/+.004) 50.00 (1.969) 50.00 (1.969) 19.00 (.748) 19.00 3.50 (.748) (.138) CKRAD-1 19.00 (.748) U3070 Recommended panel thickness U3060 0.60 mm to 1.50 mm U3070 1.60 mm -0.1/0 to 5.60 mm -0.1/0 in stages of 0.40 mm 22.00 0/+0.1 22.00 0/+0.1 (.866 0/+.004)(.866 0/+.004) 25.00 (.984) 25.00 (.984) CKRAD-2 CKRAD-3 CKRAD-2 Adapter colors (replace 0 with code) 1/4 Dark blue 2 Black 4 Grey 5 Yellow 6 Red 7/1 White ACTUATOR REMOVING TOOL 44.00 0/+0.1 (1.732 0/+.004) (NOT SUITABLE FOR USE WITH KH1 MODELS - 4-SIDE PROTECTION GUARDS) 44.00 0/+0.1 (1.732 0/+.004) Extract actuator (KR only) Allows the extraction of the rocker / rocker support assembly. Place the 2 claws under the support and push as indicated by the arrow. Extract rocker (KR only) Allows to separate the rocker from its support. InsertCKRAD-3 the toolCKRAD-3 between rocker and support as indicated by the arrrow. Pull out the tool in the opposite direction. U3052 Extract switch (KR, KL and KI) Allows to extract switch from panel mounting units. 2 Tools are necessary. Insert the tools between switch and panel mounting units from the rear to compress the snap-in device. Pull off switch manually. to be ordered by pairs Blue Dark blue Black Green Grey U2275 U2276 U2277 U2279 Yellow Red Ivory Orange FICHIER:FICHIER: CKRAD CKRAD ECHELLE: ECHELLE: 0.625 0.625 le 02/02/10 le 02/02/10 22.00 (.866) U2271 U2271/4 U2272 U2273 U2274 6.30 (.248) Usefull for future extensions. Connectors can be hanged on specific hole plugs. Contact APEM. 1.50 (.059) BLANKING CAPS 44.10 (1.736) 20.80 (.819) 25.00 (.984) 3.50 (.138) 50.00 (1.969) 50.00 (1.969) 22.00 0/+0.1 (.866 0/+.004) Recommended panel thickness : 1.50 mm to 6 mm 46.80 (1.843) 5 Power rocker switches and indicators * symbols and accessories CONNECTORS Standard color : black. Other colors : on request. Connectors cannot be combined with wiring types H and I. U22606 terminal version. For use with terminals type 2, 3, 4 or 5. 6.35 (1/4) tabs to be fitted by the user (example : TE42282-2). Can be used for the KG series. U228210 terminal version. For use with terminals type H or J. 2.8 (.110) tabs to be fitted by the user (example : AMP/Tyco 0-927779-3). U229210 terminal version : For use with terminals type B, C, E or F. 6.35 (1/4) tabs to be fitted by the user (example : TE42282-2). U315210 terminal version. For use with terminals type B, C, E or F. 6.35 (1/4) tabs to be fitted by the user (example : "Timer" terminals TE927833-2) 45.00 (1.772) 29.40 (1.157) 24.40 (.961) 25.00 (.984) 33.40 (1.315) 36.60 (1.441) U2260 U2292 CKRU2290-A CKRU2260-A 24.40 (.961) 29.40 (1.157) 36.60 (1.441) U2282 CKRU2280-A 6 20.40 (.803) 1 U3152 20.80 (.819) 11.00 (.433) 20.80 (.819) 11.00 (.433) 1 11.00 (.433) PANEL SWITCHES K range